SP1 Installation Code 800736B 3
800736B 3 error code when you try to install Sp1 for Win7, automatic update, or even after the download of the file in my computer
Hi samueladib,
I suggest you try the methods mentioned below and check if it helps.
Method 1: Run the Windows Update troubleshooting tool.
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter
Method 2: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: Put the computer in a clean boot State before proceeding with the installation of SP1.
Note: After the installation of SP1, follow step 7 in the link provided to return the computer to a Normal startupmode.
Method 4: Follow the provided article and run the system update readiness tool.
http://support.Microsoft.com/kb/947821
For reference, please visit:
http://Windows.Microsoft.com/troubleshootwindows7sp1
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
http://support.Microsoft.com/kb/2505743
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates
Tags: Windows
Similar Questions
-
SP1 installation - code 80070002 - updated met a stranger error__
I tried to install 'Office for home and student 2010' and couldn't because sp1 has not been installed. Tried to do this and got the above error. That "helped" suggested-deleted temporary files that windows uses to identify updates for my computer - update stopped, deleted files (data store and the download folder), and then restarted updates. Same mistake.
The operating system is Vista for business and 32 bits of encryption. Help
Help
Hi Fisher2,
Method 1
See the Microsoft article and run the fixit tool available below.
You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336
Method 2
If the previous step fails then check out the link below to download and manually install the system analysis tool and try to install service pack 2.
Windows Update Error 80070002
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error code: 800736B 3 during the installation of Windows DreamScene
From: Danylo Shchochkin
Hi, I tried to install the last ultimate extra called DreamScene and unfortunately has not yet (I have Ultimate and I tried to install the update as 10 times already). He always asks for restart, then shown as a failure with the error code: 800736B 3. My question what is this error code, why I can't, why I didn't realize in case in case of error on this site and what is needed to finally install it?
From: mikeyhsd
you have UAC disabled by chance. some stuff to her installation problems turns off.
If so turn back and try again.
Another response of the community of Windows Vista discussion groups
-
Vista - Error Code: 800736B 2 (cannot install updates)
I am running Vista Home Basic Edition and have been impossible to install SP1 or 99.9% of other updates. I tried to update, the standalone version and the tool rediness and probibly methods more that I don't remember. In addition, my connection constantly drops, could only be linked to the absence of SP1? Any help would be appreachiated. Thank you
Error Code 800736B 2
Ive tried your links without prevail, just finished installing windows, so not a problem any more that I very much appreciate your help and will keep on this forum for the probs I have. Sorry took so long to return to you, had to google to find this post. Thanks to PA bear.
-
Windows 7 - error Code: 800736B 3 (cannot install updates)
I'm unable to install the following updates. Update of Windows has worked up until this last batch.
Whenever I try to install the updates, I get down and the following error code 800736B 3
KB2360131 Securtity Cumulative Update for IE8
Update KB2207566 for Windows 7 security
KB2281679 update for Windows 7
Update KB2378111 for Windows 7 security
Update KB979687 for Windows 7 security
Security update for Windows 7 KB981957
KB2158563 update for Windows 7
KB2345886 update for Windows 7
Hi Cal,
you get a lot of [HRESULT = 0 x 80070002 - ERROR_FILE_NOT_FOUND ] errors because many of the registry settings are missing.
Run this tool, it arranges:
The system for Windows Update tool
http://support.Microsoft.com/kb/947821
If this is fixed not, do an InPlace upgrade :
http://www.SevenForums.com/tutorials/3413-repair-install.html
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Hello
I'm tryring to install a program on the Motorola Web site. This is the link to media from Motorola (MML). I download the file but it will not be installed. The following error keeps coming back:
The VC Redist 2005 Sp1 installation (Xp) failed. The installation program will now stop.
I spoke with Motorola and they say it's a problem of Microsoft. He stated on the Motorola site I needed to have the .NET framework 3.5 SP1 installed what I did with success.
Can anyone help?
Cordially Tash.
Hello
I would ask you install the redistributable Microsoft Visual C++ 2005 and then try to install the software and check out them.
Here is the link to download the same:
Package redistributable Microsoft Visual C++ 2005 (x 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=enI hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Windows Update error code 800736B 2.
Original title:
updates, System Restore
I can not install updates on vista, error code 800736B 2. Can anyone offer the solution?
Is there a way to reinstall the Vista operating system without losing all the programs? Thank you
Hello
Sorry for the delay in response.
If you are always looking for an answer, then you can refer to the following link suggestion:
-
Suddenly no genuine Windows. No installation code to activate.
On 2 February, microsoft decided suddenly my windows was not authentic, it only allowed restricted access. It's after 3 or 4 years of owning the laptop which has vista pre-installed. Duly, I followed the instructions and re-entered my code but the guarded 0xC004f050 error message reappear. I then phone activation but at the point of installation code, I have spaces, there is no figures. Has been updated through different departments, the line was cut.
I rang several times and been submitted to various people, which ultimately could not help at all.Then finally I was put to a service, which gave me an e-mail address to send a photo of my sticker (key, under laptop) for them and they would get back to me for help. I thought that the problem could begin to be resolved.Here is the exchange of e-mails between microsoft and myself.I'm at my wits end. Just make the problem go away, so I can have my computer, why is this a precondition not to be part computer engineer when the possession of a PC.-----------------------------------------------------1 E-mail:So after talking to the team of real profit today, I was invited to
send you this photo to help re - activate windows.
Just to recap everything. I've had the computer for about 3 years, all
a sudden Saturday, windows would not start only asked me to activate.
I tried to activate by phone, but I had no installation code, it's just n? t
on the screen, there was an empty space.
If the technician put me through to help you today, you were
closed on weekends and you asked for a photo of the faded tile.
It is the best quality I can get.
Now, I wanted to add that I tried today? There is only a single digit/letter
absent from the thumbnail, it rubbed off after 3 years of use.
So I thought, why not try to guess what it is? that's what I
have? etc.
I tried every number from 1 to 9, and then all the letters A - Z, all
Not valid?
But when I tried the 'T', he said not invalid, it said error code
0xC004F050.
What is a clue to the problem? Whatever it is, I want this to be resolved
a.s.a.p..
I did a system restore and it left me in windows, but it happened
again now and cela cannot continue.
My phone number is *.
Concerning
Ciaran
-------------------------------------------------Following Microsoft:From: *.
Sent: February 6, 2013 11:56
To: Ciaran
Subject: SSC Ref: *.
Dear Sir *.
Thank you for your e-mail.
We are pleased to inform you that your product key is as follows:
******_****
---------------------------------2nd email:Hello *.
I understood what was the missing letter, as he gave me a different result
to everything else but it still gave me an error message...
0xC004F050 error code.
So I can't access the computer correctly, please advise others.
Thank you
Ciaran
-------------------------------
Microsoft's response:-Original Message-
From: *.
Sent: February 14, 2013 09:58
To: Ciaran
Subject: SSC Ref: *.
Dear Ciaran,
Thank you for your comments.
Unfortunately, we have no access to the codes of error message in our
Department.
As you have a valid product key of Windows Vista Edition Home Premium
Please contact our product activation service
by:
***
To speak with our colleges do not push the buttons for the options in the menu and
Let the finish of the machine.
In addition our technical service will help you examine why your
Windows license has not passed authentication.
Please contact our technical support at the following phone number:
***
Thank you for your cooperation.
If you have any other questions do not hesitate to contact us.
Kind regards
Microsoft Live Services Team
--------------------------------------------3rd mail:Not impressed at all, I must have rung technical support 20 times on this subject
problem, it has been repeated since February 2. Each time, they
put me in a different Department through and I get nowhere.
I really thought, when you guys asked for a picture and showed a bit of
the knowledge that you could finally be people to address this issue.
At the end of the day, all you are doing tells me to start this
ridiculous about the whole process again.
How about someone sounds to me to help with this issue? I'm tired of having
for so many phone numbers, I spent at least an extra $ 30 euros on my
phone this month trying to resolve this issue.
I think that it's all really a big scam to get innocent people to buy another
product key, because at the end of the day, it is easy to make the
fixed a problem.
Ciaran
----------------------------------------
Following Microsoft:
De : ***
Sent: February 15, 2013 15:56
To: Ciaran
Topic: CSD Ref: *.Dear Ciaran,
Thanks for your email and please accept our sincere apologies for the inconvenience.
We checked the product key that you provided for us and we can see that it is a valid product key for Windows Vista Home Premium and the product has an OEM license which means that it is preinstalled on your computer. Please be advised that our Department is responsible for replacement of software for software retail who bought separately in a box.
As you have a valid product key and the problem is related to the activation of your product then please contact our colleagues in the dedicated service:
Product activation:
*****
Do not enter your codes as requested by the automated message and just stay on the line until you are able to speak to an agent of the product activation service.
Our colleagues in this Department have the expertise to help you further in your application.
Your understanding and your cooperation is greatly appreciated and we wish you a nice weekend.
Kind regards
***
Microsoft Live Services Team
---------------------------------------
4 e-mail:
Is this a joke? It is the number that I rang the Bell first. They put your Department.
Thanks for the details of the time - this means that I could actually find the first error recorded, which was a
0x8004E104 "The Software Licensing Service reported that a token Store token has a name not valid." error at 16:04:56
21:49, it became a
Windows license is not valid. Error 0xC004F012. Policy value 0 x 00000000.
error (after a reboot)?
Unfortunately, the system log file is not go back that far :(
Research in the application log reveals that it was shortly after that the system reported errors in disk - they are taken into account in the subsequent CHKDSK report where a large number of errors have been corrected, but one the system reports bad sectors.
Maybe this is a sign that the hard drive is dying. (especially since a CHKDSK earlier don't report any bad sectors)
You should back up your data to external storage and consider replacing the hard drive and using a clean reinstall.
-
A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371) I can't find answers and I'm not tech saavy. Every day for a month updates failed to install
Hello
I would suggest trying the following methods and check if it helps.
Method 1:
In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
Method 2:
Put the computer in a clean boot state, and then try to install the updates and check if it works.
How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.
Method 3:
Try to download updates from the Microsoft Downloads Web site and check.
http://www.Microsoft.com/download/en/default.aspx
Hope the information is useful.
-
Cannot load updates for security codes Vista Ultimate (error code: 800736B 2). Can you help me to get this resolved as soon as possible.
E-mail address is removed from the privacy *.E-mail address is removed from the privacy *.Thanking you in advance;John L. Walker jr.Hi John,.
You can try the steps in this KB http://support.microsoft.com/kb/883825 for a similar error, but others indicated that they were able to solve this problem by using the KB.
-
Cannot install Windows 7 SP1 - (error codes: 0x800F0900, 0x800B0100)
original title: System Update Readiness Tool CheckSUR.log results
Windows 7 SP1 installs. After looking in the CheckSUR.log I see not what is missing/corrupted, but do not know what to do to fix it.
Ouput CheckSUR.log below.
=================================
Preparation of control system was updated.
Binary version 6.1.7601.21645
Version 13.0 package
2011-09-09 14:37Checking Windows Service Packages
Checking of manifests package and catalogs
(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_2_for_KB2607712~31bf3856ad364e35~amd64~~6.1.1.1.mum line 1:
(f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB2607712~31bf3856ad364e35~amd64~~6.1.1.1.cat
(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB2607712~31bf3856ad364e35~amd64~~6.1.1.1.mum line 1:
(f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_4_for_KB2607712~31bf3856ad364e35~amd64~~6.1.1.1.cat
(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_for_KB2607712_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum line 1:
(f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB2607712_RTM~31bf3856ad364e35~amd64~~6.1.1.1.cat
(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_for_KB2607712_SP1~31bf3856ad364e35~amd64~~6.1.1.1.mum line 1:
(f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB2607712_SP1~31bf3856ad364e35~amd64~~6.1.1.1.cat
(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_for_KB2607712~31bf3856ad364e35~amd64~~6.1.1.1.mum line 1:
(f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB2607712~31bf3856ad364e35~amd64~~6.1.1.1.catChecking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\amd64_microsoft-windows-capi2-certs_31bf3856ad364e35_6.1.7600.16877_none_1e9086dcadcca8b8.manifest amd64_microsoft-windows-capi2 - certs_31bf3856ad364e35_6.1.7600.16877_none_1e9086dcadcca8b8
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\x86_microsoft-windows-capi2-certs_31bf3856ad364e35_6.1.7600.16877_none_c271eb58f56f3782.manifest x86_microsoft-windows-capi2 - certs_31bf3856ad364e35_6.1.7600.16877_none_c271eb58f56f3782
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\amd64_microsoft-windows-capi2-certs_31bf3856ad364e35_6.1.7601.17684_none_20691318aafde490.manifest amd64_microsoft-windows-capi2 - certs_31bf3856ad364e35_6.1.7601.17684_none_20691318aafde490
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\x86_microsoft-windows-capi2-certs_31bf3856ad364e35_6.1.7601.17684_none_c44a7794f2a0735a.manifest x86_microsoft-windows-capi2 - certs_31bf3856ad364e35_6.1.7601.17684_none_c44a7794f2a0735a
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\x86_microsoft-windows-capi2-certs_31bf3856ad364e35_6.1.7600.21045_none_c319cf760e76840d.manifest x86_microsoft-windows-capi2 - certs_31bf3856ad364e35_6.1.7600.21045_none_c319cf760e76840d
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\amd64_microsoft-windows-capi2-certs_31bf3856ad364e35_6.1.7600.21045_none_1f386af9c6d3f543.manifest amd64_microsoft-windows-capi2 - certs_31bf3856ad364e35_6.1.7600.21045_none_1f386af9c6d3f543
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\x86_microsoft-windows-capi2-certs_31bf3856ad364e35_6.1.7601.21810_none_c51bc4920b88e758.manifest x86_microsoft-windows-capi2 - certs_31bf3856ad364e35_6.1.7601.21810_none_c51bc4920b88e758
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\amd64_microsoft-windows-capi2-certs_31bf3856ad364e35_6.1.7601.21810_none_213a6015c3e6588e.manifest amd64_microsoft-windows-capi2 - certs_31bf3856ad364e35_6.1.7601.21810_none_213a6015c3e6588eSummary:
Seconds executed: 1481
Found 18 errors
County CSI shows all zeros Total: 8
CBS MUM corrupt count: 5
Total corrupt CBS catalog number: 5Unavailable repair files:
winsxs\manifests\amd64_microsoft-Windows-CAPI2-certs_31bf3856ad364e35_6.1.7600.16877_none_1e9086dcadcca8b8.manifest
winsxs\manifests\x86_microsoft-Windows-CAPI2-certs_31bf3856ad364e35_6.1.7600.16877_none_c271eb58f56f3782.manifest
winsxs\manifests\amd64_microsoft-Windows-CAPI2-certs_31bf3856ad364e35_6.1.7601.17684_none_20691318aafde490.manifest
winsxs\manifests\x86_microsoft-Windows-CAPI2-certs_31bf3856ad364e35_6.1.7601.17684_none_c44a7794f2a0735a.manifest
winsxs\manifests\x86_microsoft-Windows-CAPI2-certs_31bf3856ad364e35_6.1.7600.21045_none_c319cf760e76840d.manifest
winsxs\manifests\amd64_microsoft-Windows-CAPI2-certs_31bf3856ad364e35_6.1.7600.21045_none_1f386af9c6d3f543.manifest
winsxs\manifests\x86_microsoft-Windows-CAPI2-certs_31bf3856ad364e35_6.1.7601.21810_none_c51bc4920b88e758.manifest
winsxs\manifests\amd64_microsoft-Windows-CAPI2-certs_31bf3856ad364e35_6.1.7601.21810_none_213a6015c3e6588e.manifest
servicing\packages\Package_2_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_4_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_4_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_for_KB2607712_RTM~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_for_KB2607712_RTM~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_for_KB2607712_SP1~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_for_KB2607712_SP1~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.mum
servicing\packages\Package_2_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.cat
servicing\packages\Package_2_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.cat
servicing\packages\Package_4_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.cat
servicing\packages\Package_4_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.cat
servicing\packages\Package_for_KB2607712_RTM~31bf3856ad364e35~AMD64~~6.1.1.1.cat
servicing\packages\Package_for_KB2607712_RTM~31bf3856ad364e35~AMD64~~6.1.1.1.cat
servicing\packages\Package_for_KB2607712_SP1~31bf3856ad364e35~AMD64~~6.1.1.1.cat
servicing\packages\Package_for_KB2607712_SP1~31bf3856ad364e35~AMD64~~6.1.1.1.cat
servicing\packages\Package_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.cat
servicing\packages\Package_for_KB2607712~31bf3856ad364e35~AMD64~~6.1.1.1.catHi Jmatwyko,
The only way you can do it manually is a 'upgrade on the spot' which removes all updates and "resets" default Windows.
The damaged manifest may be able to be repaired by observing the steps here. (although that gets a little more advanced.
-
Error 0 x 80070002 Vista SP1 installation.
I tried to download windows vista sp2, but before it can be installed, a windows vista SP1 must be installed first. windows vista sp1 installation cannot proceed this error OX8007002 beak. pls help me what should I do now because there is no more support for windows vista sp1?
original title: problems with my Windows VistaHi Czarihm,
You can try these steps and see if it helps.
Method 1:
You can read the following article to run the system update readiness tool and check if you can install Vista SP1.
Method 2:
After you run the system update tool, you can try to install the stand-alone package for Windows Vista SP1.
How to obtain the latest Windows Vista service pack
For more information, you can also consult the following articles:
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
Hope this information is useful.
-
freezesistalling on a new os installed hd ok sp1 vista freezes causingimproper install
When install win vista family premium 32 with sp1 with any victory at time on a new os hd level is instlled ok but when sp1 installs it freezes causing no adequate facilities
Hello
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
or repost in the Windows Update forum link below
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Install the update for vista (KB973917) error code 800736B 3
I have a windows vista update (KB973917) error code but try to install it, I get an error code 800736B 3. Why is this?
Hi TheodoreHar,
· You are able to install some other updates without any problems?
Try the following steps:
Step 1:
Try to reset Windows updated components and check if it helps:
How to reset the Windows Update components?
Step 2:
Download and install the system update readiness tool and check if it helps:
I hope this helps.
-
Original title: trouble installing the drivers for my printer.
Hello
I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.
Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.
I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.
TKS
Gerard
Hi, Germain,.
This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.
See the articles for more information.
Find and install printer drivers in Windows 7
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
Maybe you are looking for
-
How to use the adapter from the wall with my Mac Pro laptop?
How to use the adapter from the wall with my Mac Pro laptop?
-
I have a Macbook air running OS X El Capitan. I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices. I don't know if I need to restart the time Capsule or change the wireless setti
-
Envy H8 1400Z: backup the drive n, t receive data from the refreshment
I had a 120 Hz to get rid or dracovenii a few weeks ago. The other day, I noticed that my backup hard drive has not received all the data since then.
-
Cannot find paint - is no longer listed in all programs
I have Vista Home Premium. My son and I have separate user accounts. My son was connected to his user account, he entered in start - all programs and dragged painting on his desk, as he has the icon on his desktop. However, when I login under my u
-
Two questions: 1. What are the procedures to superimpose an image on top of the other? 2. how resize you, make adjustments, adjust transparency overlay image etc? I use a MAC with Photoshop Lightroom.