Any attempt to change vmfs size block installation fails

Similar Questions

• Any attempt to vCenter OPS 5.7 installation.

  All the:

  I try to install vcOPS 5.7 in our environment. When you browse the OVF Deployment Wizard I get error that "the operation is not supported on the object", when selecting a host for placing the vAPP on?

  I'm installing on a host running ESXi 5.1.0 1117900.

  The host is part of our cluster. DRS is not on. Must be for it to install?

  Any help is much appreciated!

  I was able to successfully install vcOPS. I had to follow the article KB 2017464.

  Problem solved.

• An error occurred when attempting to change modules?  New installation on Mac Pro

  OK, I use LR since version 3.  I used it on Mac and windows. I was part of the program cloud creatives photographers for a year.  I recently got a new MAC Pro and setup the creative cloud thereon.  Photoshop, bridge and first test all work fine.  Lightroom, the application I use the most, does not work.  I get the above message.  I searched the troubleshooting tips and tried them - no results - I deleted LR and installed from a DVD - no change.

  I also noticed there are a lot of reports of this error on the forum and very little "problem solved" annotations - it also disturbs me that users have reported this error for what looks like a long time - it doesn't seem to be a new show. ".  It is a recurring issue that has not been set or is a container for lots of different reasons/questions?

  I am seriously disappointed that LR does not work on my new Mac Pro that I intend to move my photography work to this new computer.  All Adobe solutions?

  I tried the Solutions 1,2,4 and 5 on Fri/Sat.  No joy.  Today, I went back and looked at the troubleshooting guide again and realized that I had not tried solution 6.

  6 solution solved the problem.  I still argue that this is a recurring question and as Keith_Reeder said "it is not a managed exception.  May not be a priority issue for Adobe but a frustrating for users.

  Solution 1: Install the update of current Lightroom.

  Solution 2: Re-create the preferences file.

  Solution 3: Create a different catalog.

  Solution 4 (Lightroom 3) uninstall Nik Software plug-ins - NA

  Solution 5: Set the correct permissions on the Lightroom Application Support folder

  Solution 6: Try a different user account.

• Resize the image sources - change the size of the images database

  Hi all

  I have a trivial problem, but I can't deal with it. I have a project with compositions called slides. Each slide have JPG image as layer and this image is assigned 100% to 106% Resize effect (two keyframes). The images have their own folder. I need to replace all the images but the problem is that the new images have different sizes, for the most part, they are bigger than originals. When I right-click the imported images directly on I don't see any options to change their size (single space reserved or solid). When I double click them to open it in a new tab I don't see no resizing tool and layer menu is grayed out for the most part.

  So far, I found that I have three possibilities:

  1. resize as a layer in the composition of each slider. Unfortuately I don't see any way to change the database size, so resize here means add another keyframe or change existing. If I change the first keyframe on the layer in the composition of the slide then I have to proportionally resize the last of them. There are about 20 slides this process would be quite painful

  2. resize the images before importing - with PSP, GIMP or same IrfanView. It would be a much better solution than before however, this means a blind resizing - without no preview as the composition. Whenever I want to change the size a bit, I have to import image again. Painful.

  3 convert the images to the compositions,

  Convert each JPG file in composition, put this composition as the layer to each composition drag next to layer JPG, transformation of copy of layer of JPG to the composition of the image layer and delete the JPG layer. Long process but the effect is exaclty as I want and the project is fairly durable for any other modification of the image. However, in larger projects where there are many effects assigned to layers, it would be very painful.

  So is there an easy way to change the sizes of the imported images database? I can't believe that in such a huge program like After Effects, there is no way for such a simple task. I believe firmly im just something missing.

  You can resize your layers in Ae with scale parameter. (transform-> scale). If there is no animation, you need not place a keyframe. for example, you can resize your layer to 46% and decide to evolve for a while, so the first keyframe will be 46%, and the last keyframe is 83%.

  Yes, I know that if you have layer with no keyframes for the scale property then scaling ways to change the size of its base. However, in my example, I have two frames - 100% and 106%. If I import large image so I have to resize. If im on the first keyframe, and then it wil change its size to 100% for example, 56%. But the last keyframe is not changed - its still 106%. So that means animation past from 56% to 106% - image develops much more quickly than in an original animation.

  But now I found that I can select all the points of the keyframe by clicking on the entire property scale and resize proportionally when I resize the image, all the points of the keyframe. It's the simplest and most effective solution for me!

  Thanks for the help!

• VMFS block size during installation?

  I installed ESXi 3.5 u4 on a server with a 900 GB RAID array. The problem is that the ESXi install automaticaly consumes all of the disk with a data store VMFS with a block size of 1 MB. This prevent me to create virtual discs to 256 GB on the data store. I need to create a virtual big 600 GB disk but cannot. How to work around this limitation?

  Is there a way to change the size of the block to 4 MB during installation? Or is there a way to limit the installation to the use of only a 20 GB volume, leaving the remaining space for a new 600 MB VMFS volume that I create through the console without problem? Y at - it a boot disk utility that I can use to create the small partition setup ESXi will recognize?

  Assuming that you have not added any virtual computer, you can remove the data store and recreate it using your chosen block size.

• Everytime I open Firefox I get a message: "an attempt to change your home page has been blocked" and firefox crashes

  Everytime I open Firefox I get a message: "an attempt to change your home page has been blocked" and firefox crashes.
  I unintalled (on my MAC) and reinstalled twice. Makes no difference. Any suggestions?

  Could you try starting Firefox in Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the option key when starting Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

  While you are in Mode without failure, you could copy a list of your extensions and paste them into an answer? The best place for this is the support information page - either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  Scroll down to the Extensions section, and then select from there until the end of the following table with the mouse and copy. Then paste into a response. It may seem a bit messy but don't worry, we're used to it.

  In addition, if you check your homepage settings, he changed? This article explains where to find that page preferences: start-up, homepage, tabs and download settings.

• 1.8 to VMFS watch block size of 1 MB - WTF?

  We have a box 4.0 on which we have created multiple VMFS, each about 1.8 TB volumes.

  All three volumes appear and we have been using them, but today we came to increase the size of a VMDK and found that he maxed out at 256 GB.

  By looking at the properties of VMFS volume, all three show that 1.8 to, or one of them (one is this VMDK) shows a block size of 1 MB.

  By definition, if I understand correctly, you cannot have a 1.8 to VMFS with block size of 1 MB, so what is the best way to combat this?

  The server is a stand-alone, so it is not shared storage, nor is the server connected to a vCenter server.

  Thanks in advance.

  Block size does not affect the size of VMFS, it only affects the maximum size of the single VMDK file. So, it is perfectly valid to have datastore VMFS 1.8 to with 1 MB block.

  You must evacuate all virtual machines that store of data and reformat the drive with the largest block, I'm sorry, but it's your only option.

  Tomi

  http://v-reality.info

• How to change the size of virtual machine from a template installation disc.

  Dear team

  How to change the size of the disk when installing VM from a template? I'm on ESX 4.0 Vcenter 4.0

  Concerning

  Shamal

  I don't know if this is possible, you may need to deploy the machine first, then use the VMware Converter or vDisk settings in the properties of the virtual machine.

  The converter is in charge on the partition, as well as (for Windows clients).

  AWo

  VCP / VMware vEXPERT 2009

• Any attempt to create results by "Access denied" error zip file

  Windows 7 Professional 64 bit.  I am logged in as administrator.  UAC is not active on this machine.

  Any attempt to create a zip file results in a dialog box stating "unable to complete the operation.  Access is denied. "

  If I select a file or group of files/folders, do a right click and say 'Send to Zip', I get this error.  Interestingly, while the error dialog box is still open, the zip file will be displayed in the current folder.  Clicking OK in the box dialog error cancels the dialog box and deletes the zip file.

  This seems to be some sort of permissions thing.  Can I create a zipfile by clicking right in the Explorer window by clicking on "new", then "compressed (zipped) folder", and it will create the file very well.  I can even give it a name.  Any attempt to copy anything in this new zip file generates an error "file not found or no read permission.  Try to delete the zip file says 'you need permission from administrators to make changes to this file.
  So now, I open the properties for the zip file and go to the Security tab.  It was there that I discovered that this file has no owner are entrusted to him.  I can then change owners, add my name as the owner of the file, assign full control to myself, apply the changes, and now the zip file can be read/written/removed normally.
  So whenever I need to create a zip file, I have to go through the steps of creating-> change the properties of the-> Assign owner-> Apply-> add files to the Zip file.  It's a royal pain in the keester.
  My question is: what changes to do to confide as the owner by default when a zip file is created?  This seems to happen with only zip files, any other type of file gives me this problem.  What happened since I got this computer brand new with Windows 7 64 - bit on it.  I can't say that it is a "Virgin" installation, he was photographed by a group of COMPUTER companies (I work for a fairly large company).  This group is a clue what happens and apparently others in our society do not report this problem.

  Solved! The problem is with the permissions on the 'TEMP' directory which is used during the process of zip. See this announcement and scroll down to "more useful answer.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/when-i-try-to-use-the-send-to-compressed-zipped/264ba861-1262-4181-94ed-0f00325604f5

• Hi ALL, did any attempt on the virtual computer NETWORK load balancing using HYPERV on UCS blades

  I try to configure the CASE server cluster by using the Unicast NLB on the virtual machine on different blades on the UCS, it works for awhile, then he abandoned packages.

  I heard that this screenplay of unicast is not supported in the UCS when she used END-host mode in the fabric interconnet...? any attempted before.

  Would it, I use the multicast mode is that something needs to be done on the FBI62020 or the LAN switch upstream. ??

  Header note I found on the implementation of UCS for mulitcast NLBL:

  Microsoft NLB can be deployed in 3 modes:

  Unicast

  Multicast

  IGMP multicast

  For series B UCS deployments, we have seen that the multicast and IGMP multicast work.

  IGMP multicast mode seems to be the more reliable deployment mode.

  To do this, the monitoring settings:

  All NLB Microsoft value "Multicast IGMP" nodes.  Important!  Check ths by logging into EACH node independently.  Do not rely on the MMC of NLB snap.

  An IGMP applicant must be present on the VLAN of NLB.  If PIM is enabled on the VIRTUAL LAN that is your interrogator.  UCS cannot function as applicant IGMP.  If an interrogator of functioning is not present, NLB IGMP mode will not work.

  You must have a static ARP entry on cheating it upstream pointing IP address Unicast NLB on the multicast MAC address NETWORK load balancing.  This need will set up, of course, on the VLAN of the NLB VIP. The key is that the routing for the NLB VLAN interface must use this ARP entry as a unicast IP ARP response may not contain a multicast mac address. (Violation of the RFC 1812)  Hosts on the NLB VLAN must also use the static entry.  You may have several entries ARP.  IOS can use a function of 'alias' of ARP. (Google it.)

  How Microsoft NLB works. -The truncated for brevity Mac addresses.

  TOPOLOGY OF NLB MS

  NETWORK VLAN 10 = subnet 10.1.1.0/24 IP load balancing

  VIP = 10.1.1.10 NETWORK LOAD BALANCING

  Arp entry static switch advanced IP 10.1.1.10 upstream to MAC 01

  NLB VIP (MAC 01, IP 10.1.1.10)

  NODE-A (AA, MAC IP:10.1.1.88)

  NŒUD-B (MAC BB, IP:10.1.1.99)

  Using the IGMP snooping and interrogator VLAN snooping table is filled with the mac NLB address and groups pointing to the appropriate L2 ports.

  MS NLB nodes will send the responses of IGMP queries.

  This snooping table could take 30 to 60 seconds to complete.

  Host on VLAN 200 (10.200.1.35) sends traffic to NETWORK VIP (10.1.1.10) load balancing

  It goes of course to VLAN 10 interface that uses the static ARP entry to resolve to address MAC 01 VIP NETWORK load balancing.

  Since it is a multicast frame destination it will be forward by the IGMP snooping table.

  The framework will arrive at ALL NLB nodes. (NŒUD-A & NŒUD-B)

  NLB nodes will use its load balancing algorithm to determine which node will manage the TCP session.

  Only one NLB node will respond to this host with TCP ACK to start the session.

  NOTES

  This works in a VMware with N1k, standard vSwtich and vDS environment. Where surveillance IGMP is not enabled, the framing for VIP MAC NETWORK load balancing will be flooded.

  NLB can only work with TCP-based services.

  As stated previously mapping an IP unicast to a multicast mac address is a violation implied by RFC 1812.

  TROUBLESHOOTING

  Make sure your interrogator is working. Just to clarify that this does not mean that it is actually at work.

  Wireshark lets check that IGMP queries are received by the NLB nodes.

  Make sure that the ARP response works as expected.  Once Wireshark again is your friend.

  Look at the paintings IGMP snooping. Validate the L2 ports appearing as expected.

  CSCtx27555 [Bug-preview for CSCtx27555] Unknown multicast with destination outside the range MAC 01:xx: are deleted. (6200 FI fixed in 2.0.2m)

  IGMP mode not affected.

  CSCtx27555    Unknown multicast with destination outside the range MAC 01:xx: are deleted.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtx27555

  fixed in 2.0(2m)

  Solution: Change the NLB mode of operation of "Multicast" to "multicast IGMP', which modifies balancing load NETWORK VIP MAC at 0100.5exx.xxx Beach, allows to transfer occur as expected.

  Q: and if I switch to switch mode, which means all of the profile and the settings on the servers are completely exhausted and I need to recreate them. ???

  A:Cisco Unified Computing System Ethernet switching Modes

  http://www.Cisco.com/en/us/solutions/collateral/ns340/ns517/ns224/ns944/whitepaper_c11-701962.html

  -There is no impact on the configuration, you have done service profiles.  they will continue to work as expected.  Mode selector has the FI behave more like a conventional switch.  Most notable is that Spanning tree will be activated and if you have several uplinks yew, tree covering weight will begin to block redundant paths.

  You need to review your topology and what impact tree covering weight.  Generally, we at the switch port upstream defined as "edge master", you want to delete this line.

  For pre-production and laboratory environment, PDI can help qualified with the planning, design and implementation partners.  Given to review the IDP site and open a case if you need more detailed assistance.

• How to change the size of the baclok from 1 MB to 4 MB?

  There is a demand to create a virtual machine of larger than 256 GB.  In this way, we must change the block size of volume VMFS from 1 MB to 4 MB.

  We would like to know the steps to take for VI client to change the size of the block.

  Thank you

  Tony,

  I don't think that it is possible, but I have been wrong before. As a solution copy the virtual machine files in another store data, delete this data store and recreate it, taking care to choose the size of correct block during the part in the wizard format.

  Eric

• Lightroom 4: cannot change to slide show Module - Get error has occurred when attempting to change the module

  I have a new MacMini (2 months) with OSX 10.8.2 and 16 GB of ram. I had a partial re - installed, bringing more of my settings from my old computer (a MacBook Pro, 10.8.2)

  4.3 Lightroom worked very well until I went to use the slideshow module.  I received an error message and the library module does not open.  Read the message "an error has occurred when attempting to change modules.

  What can I do to fix this?

  Here's what I've done so far:

  1. checekd the disk permissions and disk status - all ok
  2. check the integrity of my catalogs and saved them - all ok
  3. moved files preferably, ending with 'plist' from the root and user libraries - no change
  4. only moved to the folder of the user, to support / library/application - no change
  5. Checked and opened upward "privileges" on the files for the library files and the catalog files.  Checked 'apply to all files' - no change
  6. contacted one and Nik to see if they had heard of this problem - no, they didn't and don't think their programs could be the cause of this problem
  7. Contact Adobe - level 1 support - crossed some of the points above - no effect

  I am waiting for a call from level 2 return to Adobe.  In the meantime, one has this problem or have any other suggestions.  The only alternative I have is to completely uninstall Lr and start again.  But it's a bit drastic.

  Thank you

  This is a bug, usually related to having a second monitor attached.

  Roll to 4.2 from here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5487 - simply drag 4.3 to the trash, and run this installer.

• How can I change "window size" in the trim of 10%?

  I use Firefox 32.0.3 and I need to know how to change "window size". I have a + and a - in the toolbar but it only changes the size of the window in increments of 10%. How can I get and intermediaries to increase the changes... i. e 15% or 18% or similar?
  Any help will be appreciated.

  That's the zoom buttons enlarge and reduce the size of the content?

  By default, the enlargement options:

  1.1 => 110%
  1.2 => 120%
  1.33 => 133%
  1.5 => 150%
  1.7 => 170%
  2 => 200%
  2.4 => 240%
  3 => 300%
  

  The default mitigation measures are:

  .9 => 90%
  .8 => 80%
  .67 => 67%
  .5 => 50%
  .3 => 30%
  

  To add or change these steps, you can modify the list in Firefox about: config preferences editor. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search box that appears above the list, type or paste the zoom and make a break while the list is filtered

  (3) double-click the preference toolkit.zoomManager.zoomValues and edit it as you wish. Since it's a little difficult to read, you can copy it to a word processor or another program where you can zoom text, modify it, and then copy the revised version.

  Note #1: After having OK'ing this change, it will come into force in any new windows that you open. Existing windows/tabs seem to remember the implementation at the time you opened the. (To move a tab into a new window, click on the tab on the tab bar > move to the new window.)

  #2 Note: If the preference becomes a mess, you can right click > reset to restore the default value.

• How to change the size of text in the message list?

  The use of Thunderbird 24 under Windows 7.

  Preferences-display-font-size allows me to change the size of the text in the message pane, but what I want to do is to increase the size of the text in the message above the message pane list and in the list of folders to the left of these.

  I need larger text to help an older user with a bad view, so any advice will be greatly appreciated.

  I have already set the Windows system font to a workable size.  It doesn't seem to affect the Thunderbird font at all.
  

  Try this add-on:

  https://addons.Mozilla.org/en-us/Thunderbird/addon/theme-font-size-changer/

• Satellite Pro P200: Change the size of partition in Vista?

  Is it possible to adjust the size of the partition after installing?

  I have a Satellite Pro P200 with a shared about HARD disk:

  C: Vista partiton - 17 GB of free to 56 GB
  E: partition of data of-54 GB of free to 55 GB

  I know that the data reader is used by Vista to contain information of recovery.

  However, I would like to know if its possible to reallocate some of its spare production capacity at the Vista drive without compromising the recovery feature?

  Of course, you can change the size of the partitions after Vista installation.

  You can change this in the Vista Disk Manager s

  Here, you could choose the existing partition, and then you could reduce the amount of partitions. This free volume can be added to another partition, or you can create another partition.