any ideas on how to view the files from my external hard drive?

Similar Questions

• How to make windows media player to play the files from my external hard drive?

  I use Windows XP on my laptop and have attached an external hard drive Buffalo Mini-station.

  I want to transfer my music to the device, but cannot find a way to get Windows Media Player to select files to allow him to play.
  I would like to do a shuffle, as it does if the music is on my internal hard drive, but cannot work out how to do the same thing from the walk of Buffalo.

  Can anyone help?

  Thank you.

  It should be a simple matter to change records are included in the library.

• How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created?

  I have an external hard drive that I loaded all my important files on all my computers. There is a file that I put in place restrictions to access, but it has been so long that I don't know how I did it or how to remove it. How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created? The computer that I created the folder of running Windows Vista. I am not able to access files in this folder from any other computer. It gives me the following error: "E:\School is not accessible. Access is denied. »

  Hi mango127,

  I suggest that you give all permissions for everyone on this folder and check if it works.

  "Access denied" error message when you try to open a folder

  http://support.Microsoft.com/kb/810881

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  If the previous step fails then I would suggest that you take the backup of this folder on the computer you were accessing and later to format the hard drive.

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes

• How to reset the password forgotten on external HARD drive

  Hello

  I forgot the password of my external hard drive.
  How can I reset this?

  It has all my photos out there I want to come back.

  The external HARD drive comes with software that the password. Have you used this software?

  I m not very well what HARD drive you have exactly, but in the case of the password disk HARD unknown could be deleted, so I guess that by using such software.

  But I'm afraid, this is not possible and if yes, then secure files could serve more than m.

  I say it in a different way: password protection would be useless if you can remove any unknown or forgotten password. Don't you think?

• Win 8 (Pro) - how to save the system to an external hard drive?

  Hello

  I have successfully installed the () 8 Win Pro) OS in my new PC.

  I have a 500 GB external hard drive and want to back up the entire system and its parameters in this disc.

  I would like to start from this external hard drive if the main C drive in my PC goes down.

  Can I know how to do?  It seems any different from Win 7.

  Thank you

  Low

  Hello

  Thanks for posting your query!

  Yes, you can create a recovery.

  Follow these steps:

  Click Windows key + w. from the splash screen

  Type Windows 7 recovery of file and press ENTER.

  Click on create a system image.

  This will create an image of the system if an external hard drive is connected.

  To back up files, those who are in your libraries, contacts, Favorites, SkyDrive from Microsoft and on your desktop:

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-8/how-use-file-history

• Copy the library from an external hard drive to another catalog EHD and sync

  Already, I saw this link but it doesn't tell me how to copy the library, it simply moving photos from one hard drive to another How to copy files to an external hard drive in Lightroom "Julieanne Kost's Blog of »

  I want to know how can I make a second copy of my library on my second drive, backup in case where my only main falls down and I want it so that my catalog can be synchronized with my second backup drive.

  Any ideas?

  The easy answer is to-

  1. close Lightroom

  2 use the software to 'mirror' of your Master images folder and subfolders of the primary transmission to the second DHM operation.

  Some free Windows software-SyncBack, MS-Synctoy, FreeFileSync.

  * If your Lightroom catalog file exists in the records of Master images, it will appear in the "mirror".

  * You can exclude the... Previews.lrdata folder of EHD. (it can be huge, and it can be re-built)

  * Note: "block mirror" made an exact copy of the files, it adds new files and removes the file 'deleted' SMT. It should not be used as a backup of the system-Deleted files are also deleted from the "mirror".

  * Note: You must not access the EHD copy using the catalogue work Lightroom on the main drive - this will only create chaos.

  3. If you want to restore from a system crash JEP 'mirror' will catalogue and image files in the exact state at the time of the last "mirror." Copy everything back to the main unit and open the catalog. LRCAT file. Lightroom is back in business.

• Windows 7 can not "see" the files on my external hard drive all of a sudden after I used ICACLS to give me full control.

  I used ICACLS in a command prompt high to give me all permissions for all on the external hard drive. I do not share the disk or remove permissions from any other 'user' but all of a sudden the guest not to see the files on the disc and I don't know what to do about it. But when I open a window and go outside, the files are there, I can access it, use them in all cases, I would normally.

  Anyone has an idea why an elevated command prompt would not be able to see the files that are clearly on the external hard drive? There is just something not right on command prompt, you see only not the files that are there.

  Thanks in advance

  Update: it turns out that there seems to be some kind of conflict between the UAC and the Administrators group. Don't know how I was touched, but I finally finished refusing authorization in writing system on my external hard drive. Suddenly Builtin Administrator, users of Builtin and NT Authority stood, one of them, or another group, resumed training, locked read-only access to all files, and then he took it a little further and removed my ability to write attributes or read them. I was forced to use a back up 'Admin I have on standby with a third I reapplied my main administrator permissions, but still denied access. After doing things with ICACLS, I was able to get a partial control, but I still couldn't save.

  At the end of the road, it turns out that an external hard drive formatted in NTFS is recognized by the computer as a disk fixed, as if it were part of the computer, and there it was treated as such, given my file system files by locking the.

  Even with the hidden Builtin Administrator I activated, I couldn't access the files. I finally had to move all the girls to the drive c:\ and format the external drive with exFat so that the system do not think that he was part of the computer. Unfortunately, I can never depend on having a System Image backup because exFat cannot have a writing for her.

  I have full access, as well as anyone and everyone, there is no permissions on exFat, so it's a compromise, better than the system for the control of my own computer ruined combat...

  Luke

• I can't save the file to my external hard drive connected to my wireless router!

  I have a wireless router netgear WNDR3700 with 'plug-and-play' feature that allows a home to simply connect your hard drive to your network. I managed it to get up and running, but I encountered some problems when I tried to save files on the disk. The strange thing is that I can copy and paste or move the files to the location that I want to but I can't save it there... I have windows 7 Professional 64-bit installed.

  I thought about it :)

  In the folder "My Computer" and under "Network location" I clicked on my external hard drive. Just below the navigation bar, I clicked on 'Map network drive' I entered all the information of location on hard disk and I got another file under "network location". I deleted the old one and used a new one that I could use without any problems until now... hope this makes sense...

• I can't find my external hard drive under 'Computer' but it appears in "Devices and printers" How can I access files on my external hard drive?

  I can't find my external hard drive in "computer".

  I just bougth a new HP computer running Windows 7.  I just copied a bunch of movie files, music and photo of my old Mac (OSX Leopard) on a Western Digital external hard drive.

  I plugged the external drive in my HP via USB 2.0 on the front of the computer.  Windows recognizes the drive.  She appears in the Panel of external control/hardware and Sound/devices and printers as "HARD disk".

  It does not appear in 'Computer' under 'devices with removable storage ".

  I just want to get to my files so I can copy them to my new computer.  How to access my files on the external hard drive?  Why isn't he appear in 'computer '?

  Hello ShamedMonkey,

  Thank you for your message.  The problem you are having is because of differences in formatting between PC and Mac.  You can, however, transfer your files between the two.  I will set out what must be done under and limitations of each.
  First, you will need to format the drive on your PC.  When you format the PC, you can format it in FAT32 or NTFS.
  (You mentioned that you do not see the drive in the computer) To format drive:
  Click 'Start' > right click on 'Computer' > select 'manage '.
  Click on "disk management".
  In the right pane, you should see your drive > you can then do a right click and 'format '.
  FAT32:
  This format will allow you to easily transfer files between the two.  This format becomes problematic when you transfer files more than 4 G.  There is a limit of 4 GB in FAT32, etc. of many movies are bigger than that and cannot be transferred using this format.
  NTFS
  This format has no size limitation, however, in its normal state it will be 'Read only' on Mac.  If you will not be able to transfer all the data itself.  While doing some research on the web, it seems that you can use a program called MacFuse on your Mac to change to NTFS files.  I have not confirmed this, but you can give it a try.  If this program works as planned, it would be the way to go.
  Please let us know if it did or did not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Move the files to an external hard drive - LR3.2, Mac Snow Leopard

  I apologize for this right now, but after reading other threads in this forum, buy a book, and I watch a video, I am more confused than ever! I want to spend 6 months of folders, subfolders, metadata, and keywords, off my portable hard drive to an external hard drive to free up room on my laptop (not). Then, I want to be able to access with the LR catalog on the external hard drive. The catalog that I use currently (showing all my photos 2010) also contains more recent files that I don't want to export because they are still topical. My studies, there are all kinds of suggestions on the creation of new files by drag-and - drop, using the sign, export catalogues etc, but nothing that tells me step by step how to achieve what I want to do! Pourrait - a nice person please guide me through this?

  Thnaks,

  Richard

  To make LR 'see' your external hard drive, you must make a top folder of in LR.

  In the library Module, click the icon "+" in the folders Panel, and then click "add a folder".

  Navigate to your external hard drive and create the folder, call it what you want it to be.

  Right-click on the new folder and click on "add a folder"; the player must then become visible.

  Then, just drag and drop your images into this folder.

  WW

• How to join the partitions in an external hard drive?

  I have an external hard drive. Empty, but divided into two partitions. (I see two drives)

  How can I meet two partitions?

  I tried using the disk utilities, but I got the message that I couldn't change the partitions.

  (In Dutch: "Deze kan niet worden gewijzigd partitie"; in English, something like: "this partition is not editable")

  What is the procedure that you follow?

  1. Select the disk in the sidebar that contains the partition you want to enlarge, then click on the Partition.

  2. in the list of available Partition, select the partition in the partition you want to enlarge, then click on remove.

  The partition is immediately erased, leaving the space it occupied available.

  3. resize the partition by doing one of the following:

  • Drag the separators between the partitions in the list of available Partition.

  • Select a partition in the Partition layout list, and then enter a value in the size field.

  4. click on apply.

  Disk utility (Yosemite): partition a drive

• I'm unable to access the files on my external hard drive

  I have an external hard drive and can't read the files. The device appears on my PC, but no file shows when I go to the device and equipment. My PC is not recover this unit and only not recognize it as a USB device. I can see this under the folder hardware and devices, but there is no entry. Is there a way to access the files or retrieve files? The material of the driver is up-to-date.

  Hello

  Try to connect the external hard drive on another computer / USB and check.

  If you are able to access the files on the other computer, and then try to update the drivers for the chipset of your computer.

  You can visit the website of the manufacturer of the computer to get the chipset drivers.

  Thank you.

• I can't access the files on my external hard drive suddenly...

  We just bought a new computer-everything is in order and I was just post some photos of my external hard drive to picasa. He said all of a sudden that I do not have access to view these photos (the disk hard ext..) I was wondering if someone can help me with this one?

  We just bought a new computer-everything is in order and I was just post some photos of my external hard drive to picasa. He said all of a sudden that I do not have access to view these photos (the disk hard ext..) I was wondering if someone can help me with this one?

  It still works on the old system?

  Are you actually getting a message that says, 'Access denied' and you just did not share that?

• How can I recover files from a dead hard drive?

  My MacBook (OS 10.6.8) dies suddenly. It has the power, but by pressing the power button it gets only the intitial light gray screen, not even for the black Apple logo.

  I have an external hard drive that has everything saved except emails in my Entourage program (Office for Mac 2008). There is a data recovery program that I could buy for a missing hard drive?  Or an authorized repairer of Apple would be able to recover the data?  Thank you!

  Boot - grey, blue or white screen at startup, w/spinner/progress bar

  Boot - grey screen

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

  Recovering data in the other post.