Any ipad supports usb devices?

Similar Questions

• I get the error: you have exceeded the number of USB devices supported

  I get the error: you have exceeded the number of supported USB devices. I read that a single USB can access up to 127 devices and I just plug in 20 (would do more). I use a hub 4 ports that is powered and port hubs of 2 to 10 who is also powered so I don't think it's a question of power. Operating system is Win7. Thanks in advance for the help.

  They stop at Z

• iPad: pilot USB MTP / Apple Mobile Device Support Driver update failed - access denied

  Hi all

  I do iTunes/iPad/AMDS rerun (Win7 Ultimate 64 bit). After the last update of iTunes to 11.1, I'm not able to install the Apple Mobile Device Support any longer. Usbaapl64 installation fails. Even a manual update is not possible (access denied).

  Before you uninstall, the iPad has been recognized as Apple Mobile Device Support, but using the old version located in system32. Same result trying to update the driver manually - access denied. After you have uninstalled the ADM the iPad is recognized as Apple iPad to portable devices (in dev mgmt). Updating the driver (and selecting the usbaapl64 in CommonFiles/Apple/Apple Mobile Support folder) still fails - access denied.

  Even to disable UAC, using the account hidden administrator and start Windows in safe mode will not grant access. I have no idea what to do now. Is this a normal behavior or y at - it something very wrong in my system? I don't want to format my system.

  Thanks in advance.

  PS: Windows is up to date
  P.P.S.: Tried numerous solutions of Apple, articles, forums, google, re - install iTunes and what you have. Nothing has worked.

  I have it.

  Have a look in the newspaper of the setupapi.app.log and setupapi.dev.log C:\Windows\inf files I discovered that management installation program / unit was not able to create a temp folder in C:\Windows\System32\DriverStore and was not yet able to copy the files in C:\Windows\System32\DriverStore\FileRepository.

  After you change the access rights (gave me and SYSTEM full access), I was able to update the driver USB MTP driver Apple Mobile Device real Support. Later, I was able to install iTunes without any problems during the installation of the pilot AMDS.

  Took me only 4 days to the indicator with the search in the log files mentioned above-. -.

  See you soon.

• Windows crashes when any USB device is connected

  Hello

  I have a laptop Dell Latitude D505 with Windows XP. Recently, whenever I plugged in a USB device, Windows would freeze and I have to hold the power button down to turn it off.  Since then, I tried to replace the RAM, re - install Windows on a new HARD drive and taking the other components (Wi - Fi, CD). I still don't understand why it freezes. Any ideas?
  Thank you very much!

  Hello

  1. don't you make changes to your computer, after which the issue started?
  2. have you tried to connect USB devices to a different USB port? If so, they work on other ports?
  3. have you tested the USB devices on another computer?

  Uninstall and reinstall the usb host controller driver and check if the problem persists.

  http://support.Microsoft.com/kb/283658

  I would recommend that you update your BIOS and drivers from the chipset and check if the problem persists.

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Cannot open any usb device - help!

  cannot open any usb device - including external hard drive for back in place - in one of the ports on my computer - they all work on other computers - worked well on Friday - doesn't work don't not Monday - get up unknown device message and shows even in Device Manager - have you tried to uninstall etc - does not work - nothing I found solves the problem - can my computer blew something that only affects reading USB keys?

  Hello

  1. what exactly happens when you try to connect the USB device?

  2. you receive an error message when you connect the USB device?

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Equium M50 - doesn't recognize any USB device

  All my USB devices (printer/external disk hard/usb keyboard, mouse, usb-serial adapter / any...) are not recognized by Windows Xp SP2, but USB port will provide power to the device. Everything worked fine before that I don't know what is happening. I tried all the USB ports on uninstall and let windows install again without any luck... also tried to do a diagnostic of Toshiba and pass USB.

  any sugestion? Thank you.

  Hello

  Go to Device Manager. Here, please select the root USB Hubs and properties.
  You will find a power management tab. Uncheck allow the computer to turn off this device to save power

• Tecra A9 recognizes any usb device

  Tecra A9 - PTS52E

  I need help/information. USB cannot recognize any device, i, e... Flash / sticks of memory, floppy drive, external cd/dvd or hard drive. previously works very well and suddenly stops and research pilot.

  TIA

  Hello

  Have you noticed yellow exclamation marks in Device Manager next to USB host controllers?
  Check it!

  Even if the yellow exclamation points are not visible in the Device Manager I recommend to remove the USB host controllers and root device manager USB hubs and restart the laptop again.
  Wait that all USB controllers will be recognized by Windows and retest your external USB devices.

  Good bye

• NI-VISA 5.3 driver Wizard does not support USB 3.0 devices

  Hi all

  It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this?

  Thank you very much in advance!

  Jackie

  Hello Jackie,.

  Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard.

  A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0.

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• USB printing support is a USB device that is older and may not work with USB 3.0

  Separated from this thread.

  Mahesh,

  I had a same problem, followed your recommendations and everything worked fine for a day and a half. Now I get the same error again.   Are there any additional settings or changes I do that can keep it works?

  Thank you!

  Hello

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the USB device?
  2. the problem occurs only with a specific USB device?

  3. What is the brand and model of the computer?

  This problem might have occurred because of these reasons:
  1 USB drivers are corrupt.

  2. USB port does not work.

  3. hardware issue.

  I suggest you run the hardware troubleshooter to check if it helps.

  (a) press the Windows key + C on your keyboard to display the bar of charms.

  (b) type of Troubleshooting , and then click solving problems under settings.

  (c) now, type Hardware Troubleshooter in the option Search .

  (d) click on hardware store to run the troubleshooter.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Setup could not find any supported network devices

  Hi all -

  I try to install ESX 3.5 on Windows 6.5 for learning virtual machine. During installation it says "Installer could not found no supported network devices.

  My Intel Core2 WD system and the NETWORK interface is "Realtek RTL8168 (p) / 8111 PCI Gigabit Ethernet.

  Please let me know why I get this error.

  Thanks in advance... J

  Shiv

  Make sure that the virtual network adapter is connected - also if you did not check the white paper on the http://knowledge.xtravirt.com/ title VI3.5 in a box - provides detailed instructions on how to set VI 3.5 under my computer.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Can I use Yoga 3 Pro to charge USB devices (phone, Tablet, iPad, etc.) when I'm far from an outlet?

  Is Yoga 3 Pro a giant USB battery pack?

  Yes, the Yoga 3 Pro IS a giant USB battery that can charge USB devices is not plugged into an electrical outlet.

  • How does it work?

  The USB port on the right side of Yoga can be configured to be "Always On". Go to the application settings of Lenovo, and powered on, there is a slider to allow him.

  • The 'Always On' USB port stay on when Yoga 3 Pro is unplugged?

  Yes, he does.

  • Always on USB port:

  

• any USB device USB not Republic United Nations notes senza

  Without some special USB device USB no Republic - Cosa fare UN notes? Grazie leopoldo Rogante

  Hello

  This is an English language Forum.

  Please go to

  http://answers.Microsoft.com/en-us

  to select your language from this link English 

  Don

  Questo e UN forum in lingua inglese.

  If get di andare

  http://answers.Microsoft.com/en-us

  by rates the lingua da questo link English 

• Vista has decided to not recognize USB devices... have updated the drivers but no joy... any ideas pls?

  None of the packard bell 32-bit USB ports does not work... so cannot play games or download files from phones to the computer.

  Hi tony eden,.

  I suggest that you try the methods mentioned below and check if that helps.

  Method 1: Uninstall and reinstall the USB controller

  (a) click Start, type devmgmt.msc in the start search box, and then click Enter. Device Manager opens.

  (b) expand Bus USB controllers.

  (c) right-click the first USB controller under Bus USB controllers and then click on uninstall to remove it.

  (d) repeat for each controller USB is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Check the USB device to see if it works.

  Method 2: Follow the steps in the section provided below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices