any USB device USB not Republic United Nations notes senza

Similar Questions

• USB MALFUNCTION. EVERY SECOND, PLUG UNPLUG ANY USB NOT CONNECTED SOUND. BLUE SCREEN OF DEATH.

  I also wanted to put this up as a background for my laptop.

  WAAAAY before this problem started my webcam stopped working and when I close my laptop, then open it again (pulling on my screen down and closing laptop then pull the screen up) the computer refuses to start and just flashes, forcing me to remove and replace the battery to restart. I don't know if it is a symptom that lead to my problem, but could you give me some advice on this? Like, it would be something that lead to the problem or should I start individual questions for specific help on each problem?

  From what you describe, it looks like there may be a hardware problem with the webcam.

  Can you try disabling the webcam in Device Manager, restart the computer and then see if the blue stop screen error.

  The memory.dmp file showed a potential involvement of igdkmd64.sys (Intel graphics driver).

  Try to run the utility from Intel and see if it picks up the driver updates:

  http://www.Intel.com/p/en_US/support/detect

• USB key used in iMac unrecognized by any other device

  Hi all, I recently encountered a problem using USB keys with my iMac 2010 10.11.3 running OSx.

  My iMac will recognize UBS sticks and allow me to save documents and files for them, but when I insert into any other device (e.g. a few friend PC and Macs, professional printers to Officeworks etc.) the USB stick is not recognized and does not see the same on their system.   Then when I insert the USB in my iMac, it is recognized immediately as well as its content.

  Before that, I was able to share files and documents with family, friends and clients on USB with no problems at all.

  I tried a variety of different USB keys (old and new) and what is happening to all of them, whatever the brand, age, size, etc.   Is produced only for a few months and at first I was in denial and thought that it was my friend PC, but now I see that it is certainly a problem with my iMac.  He may have started happening around the same time that when I upgraded to IE Captain earlier this year.

  Any ideas please?

  Thank you.

  eccydee

  The fact that this happens with different computers suggests that the problem could be the configuration.

  Go to Applications/Utilities/Disk utility. Insert your flash key and look at the settings. It may look like this:

  

  Everything on this list must be verified. While you're there, see if your USB is correctly configured:

  http://www.PCAdvisor.co.UK/how-to/storage/how-format-USB-stick-on-Mac-3434423/

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.

• USB devices drivers not installed

  Hello

  I NI USB-6212 device, LabVIEW 2010 and DAQmx 9.1.5 on Windows 7 (x 64) device drivers. Device is normally recognized on another computer, but not on my computer. When I plugin device, searching for drivers to boot Windows, but they are not. The Windows Device Manager sees the device as unknown device, and MAX sees him not at all. Monitor devices OR runs and NO charger.

  Any help would be appreciated.

  Thank you

  Andrej

  I don't think that it is the cause of your problem (since you mentioned that the Windows Device Manager does not see the device), but you should also note that there is a problem in 9.1.5 where devices are not necessarily recognized by MAX; patches are available for 9.1.5 or you can go to DAQmx 9.1.7 or 9.2.2.

• HP Envy 15 - q47002 i7: laptop overheating, does not recognize any USB. Even in the Bios.

  Hello

  I bought this product last year, so my warranty wore off.

  My laptop is overheating and it is very slow at this point (even videos are not working well). I tried to clean it up but it was without result.  I want the game and computationally intensive applications, but I'm afraid of the motherboard or hard drive failure.

  Now to the point. I can't install the new OS, any OS because this laptop doesn't have a DVD player and it doesn't recognize any usb 2.0 or 3.0.  I tried to change the options in the Bios and I tried to uninstall and install the drivers (they are up to date).

  What should I do? I can't install a new system because of this problem, and I can't use anything more demanding than youtube which is really annoying since this laptop has good specifications.

  I am currently running Windows 8.1 which I got when I made a purchase.

  I hope someone answers!

  Thank you.

  EDIT: In the Device Manager it says device not installed with yellow exclamation point. By Usb or ext hdd. And it will not find the device-specific drivers. As I never need them on another PC or laptop.

  Hi @HarunC,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP ENVY 15 t-4710HQ i7 Quad Core Notebook and questions with serveral fuctions works do not. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  With the USB not recognized by Windows.  Here is a link to solve the USB connections.

  I would like to uninstall everything cited first in the list of universal serial bus controllers.

  Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.

  Restart your computer, and then insert the USB device.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link if you need to download drivers USB Intel for Windows. This is a utility to update.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• removable usb device is not recognized by windows

  my camera and GE multi card reader no longer recognized by windows.   in the Device Manager is no longer visible. I plug it into the computer and nothing, no sound connection and no autoplay more. This is due to an update. also install adobe air appears as damaged when starting computer installation. all I want to do is load the holiday pictures to my laptop as I have always. but now nothing. all ideas

  Hello

  1. What is the brand and model of your computer?
  2. What is the version of Windows installed on your computer? For example, Windows 7, Windows Vista.
  3. this happens with all USB devices?

  4. have you done any software or hardware changes on your computer before this problem?

  You can run the fixit mentioned in the following link.

  Method 1:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you to update the chipset drivers and other drivers on the manufacturer's Web site.

  In addition, you can search the hardware changes in Device Manager and check if it helps.

  In addition, I would ask you to answer these questions and add additional information so that we can guide you in the right direction.

• Device USB not recognized (malfunction)

  I went on my external hard drive and an error message came - USB not recognized - device due to a malfunction. I tried switching off all voltage and turn support but still the same voltage. Then I went to print something and the same message came. However, I used my printer today without any problem. I don't know what happened. Advice please? Thank you very much. Aide-de-camp

  Hello ~ thanks for the reply.

  Just to say that I read somewhere switch all switch off and leave it for half an hour - then turn on everthing. Miraculously - it worked!

• Cannot open any usb device - help!

  cannot open any usb device - including external hard drive for back in place - in one of the ports on my computer - they all work on other computers - worked well on Friday - doesn't work don't not Monday - get up unknown device message and shows even in Device Manager - have you tried to uninstall etc - does not work - nothing I found solves the problem - can my computer blew something that only affects reading USB keys?

  Hello

  1. what exactly happens when you try to connect the USB device?

  2. you receive an error message when you connect the USB device?

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• USB not recognized - even when there is no device at all (Windows 7, Pavilion dv7)

  For a few days now, I get the message

  "USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."

  He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...

  Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.

  I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.

  Someone has an idea?

  Thank you

  HP Pavilion dv7 Notebook PC
  LE902EA #UUG

  Windows 7 64 bit

  The solution can be found here

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• USB not recognized - even when there is no USB devices at all the

  For a few days now, I get the message

  "USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."

  He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...

  Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.

  I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.

  Someone has an idea?

  Thank you

  HP Pavilion dv7 Notebook PC
  LE902EA #UUG

  Windows 7 64 bit

  I have disabled the root hubs, figured out that we caused now my mouse and other USB physical led to no longer working and that was allowed again.

  The one who gave the error message is now disabled and if the error message is no longer present.

  Result: (built in) cyberlink youcam and biometric no longer work. But at least the annoying message disappeared, so I guess I can live with that.

• Vista: The device can not start (error Code 10) for a USB CDC device which works fine in XP

  I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista.  The device uses the usbser.sys driver and emulation of the virtual Comm Port.

  The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes.  Shows Device Manager: device can not start (error Code 10).

  Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC.  With Xp, it all works very well on more than one PC, with Vista, there are questions.  I use the INF manufacturer provided for Vista, still no results.

  Any ideas on this would be greatly appreciated.

  Hi NuWaveDC,

  Thank you for taking the time to post on the Microsoft answers Forums.

  Please see the following article for an explanation of this error code 10.

  Explanation of error codes generated by Device Manager

  http://support.Microsoft.com/kb/310123

  Follow the steps listed for the error Code 10 see if this helps solve your problem or not.

  Please post back to let us know if this information was useful or not, so that we can help you if need be.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.