Recommendations for the collection of NICs (<>- SG200 vSwitches)

Similar Questions

• Recommendations for the best 3D modeling App / program?

  Does anyone have a recommendation for the best 3D modeling application / program?

  (More for the creative rather than animation games and computer work)

  Thank you

  Hello

  I love Autodesk Inventor, but you need to use BOOTCAMP or VMWare/Parallels to run it because it only works with Windows.

  See you soon,.

  Adam

• IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  Sorry, but if your device is disabled and you have no backup, then you won't be able to save the data on the device:

  https://support.Apple.com/en-us/HT204306

  You should back up your device regularly to iCloud or import your photos to an application on your computer. Otherwise, you will be risking losing those photos. If your device has been lost, stolen, or crushed by your car, you'd be in the same situation. Really sorry for your photos.

  Good luck

  GB

• I need a download of software recommended for the Transcriber ICD-PX312 for Windows 7.

  I installed the software that came with the ICD-PX312 on a windows system 7 and it crashes constantly. I need a download location for the software recommended for the valid software for the Windows 7 platform.

  all links will be useful.

  Hi Tim,.

  Welcome to the community of Sony!

  Download and install the latest version of the software of the Organizer from the link below:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=ICDPX312&upd_id=8218&os_group_id=5

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Parallel logic LSI, LSI logic SAS, parallel Buslogic (not recommended for the guest operating system), vmware paravirtual

  Infrastructure:

  vSphere

  ESX 4

  Reference Dell R710 Server

  I install WIN 2003 x 64 as a virtual server on ESX 4, when I select LSI logic SAS & LSI logic parallel it does not detect the hard drive, do I need driver if so where can I download?

  For parallel bus logic (not recommended for the guest operating system) & Vmware paravirtual, do I have to select this option for my win 2003 R2 x 64 edition?

  Please help on this issue.

  ~ Rashid

  If you really want to use it for installation, you will need to extract the driver from the VMware Tools ISO and add it to a disk image.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Format recommended for the PDF author metadata

  Hello

  I work as a librarian and I am responsible for the Department of the thesis of my University Library. These are filed and archived as PDF files. Some of them are available online, some are not.

  I was told to systematically fill metadata "Title" and "Author" for each PDF deposited in our electronic despository.

  My question has to do with metadata "author." Is there a structure recommended for her?

  As it is I can think of a lot of different alternatives:

  First name last name

  LastName Firstname

  LastName, Firstname

  etc.

  As a librarian, my instinct was to choose the name, first name format (used in the author/creator DC element, for example), but I realized that whenever I have saved the PDF file and then displays the part of metadata (via the shortcut Alt D), it would show "Lastname, Firstname" rather than the full name (for some unknown reason, adds Adobe Pro "" ""). After some tests, I came to the conclusion that the coma was the source of the problem. So I changed my mind and adopted the format Firstname Lastname , but I'm not sure that this is the best option.

  So if I ask you a few questions, here they are:

  -Which format do you recommend for the metadata of the author (if there is one)?

  -Why a coma generates ""?

  Is there a specific separator character that I use when I need to fill two different names (if a given thesis has been written by two different people)? (this issue also applies to metadata "Key words")

  Thanks for your patience and for your time,

  See you soon,.

  JHM

  There are no rules in itself, but the XMP specification defines DC: creator as a ProperName field, which means it must be written in the way he would say - "John Smith" rather than "Smith, John". Finally, it is until you do with data - if your external search system to priority of family name, do it.

  The fields on the tab of "description" of PDF Properties dialog comes from this Document information block in the standard PDF file, which is independent of the XMP metadata. Although these fields of DI are often people will look on, in a formal catalog system the XMP object has priority (indeed, in the ISO PDF/A standard that you are supposed to ignore completely DI fields).

  Document Information fields are stored in the PDF file as strings rather than the XML entities. Commas would confuse the parser in thinking it was to see a table, so they will trigger Acrobat in order to encapsulate the entries between quotes. He will assume a comma and a single space are part of an individual term, if you want to create a list using the semicolons or several spaces between words. Senicolons conquer spaces:

  • Doe, John; Lord Lucan; Barney, the Purple dinosaur will be kept at the "Doe, John"; Lord Lucan; 'Barney, the Purple dinosaur'
  • Is no one, no one will be kept to the ', that is, not a "; person because the spacing is a term separator.
    

  The important thing to remember is that the entrance of DC: creator XMP is updated whenever you change the author field of DI, but it does NOT follow the same rules. ProperNames XMP are OK with spaces but they don't like commas or semicolons - so the first example above appears in the tree view of XMP as

  1. DOE
  2. John
  3. Lord Lucan
  4. Barney
  5. Dinosaur
  6. the
  7. Purple

  This reinforces the idea of using names as spoken. Lord Lucan has survived his trip to XMP, John Doe became two people. Barney is beyond hope. in many ways.

• Recommendation for the configuration of the disk

  Recommendation for the configuration of the disk:

  A wide range of RAID 5 consisting of 8 x 146 GB drives?

  Two arrayys of RAID 5 with 4 x 146 GB drives in each table one would be used for the data store, and the other would be usd to images of backup to it.  The idea here is that when we do backup via the script GhettoVCB/o would be mainly on the secondary RADIUS and not the main data store.   In my opinion?  I think I have the only RAID 5 Bay with all the readers of 8 x 146 GB for a data store single should surffice.   I don't think the performance problems will be that detrimental.

  Do not hesitate to offer advice on scenarios, thank you

  Engineer accommodation

  ModusLink Open Channel Solutions, Inc.

  As written before, depends on the type of e/s.

  With more than R and W low, RAID5 (on multiple disks) could be very good.

  But don't forget to also use a global hot spare, degraded performance a RAID5 mode could be dramatic.

  And don't forget that your controller has a battery backup.

  André

• Cisco recommended for the GRE VIA IPSEC router.

  Hello world

  I intend to connect our two remote locations via IPSEC tunnel, looking for the cheapest option available for the router options.

  Do you have any good recommendations?

  Have a nice weekend!!

  Very appreciated

  Hello

  There is 1 that I love so much, it's 892fsp of Cisco.

  It has 8-port switch, you can make l2tp vpn, free will, love, ips, zbf...

  I hope this helps.

  Thank you

  PS: Please do not forget to rate and score as correct answer if this answered your question

• Best practices for the collection of network adapter for network management

  Quote from http://www.vmware.com/files/pdf/techpaper/VMW-Server-WP-BestPractices.pdf :

  Aggregation and network management networks:

  To set up a team of network for the management network adapter, configure the network adapters in the vSwitch
  configuration of the ESX/ESXi host, for configuration active / standby.

  The vSwitch must be configured as follows:
  The load balancing • route = based on the original (default) virtual port code
  • Restore = 'No '.
  • vSwitch0: two physical network adapters (for example: vmnic0 & vmnic2)
  • Two groups of ports (for example, vMotion and management)

  In this example, the management network works on vSwitch0 as active vmnic0 and watches over vmnic2.
  The vMotion network works on vSwitch0 as active vmnic2 and watches over vmnic0.

  My configuration:

  The two active adapters (not active / standby)

  Failback = 'Yes '.

  Not clear if the network management and vMotion are both active on the same vmnic or different.

  Question:

  Is smart enough to keep the network management and vMotion on different vmnic SE to ESXi 4.1 or I should change to active / standby config and make sure they are on different vmnic?

  It would make a noticeable difference?

  Ah yes, you are right in your configuration then.  I would never mix NIC vendors in any type of trunk, I saw things get funky now and then.  VAAI won't give you an advantage when you do a storage vMotion, normal vMotion will always use the same amount of traffic, because memory cards must always be copied between hosts.  It is advisable to devote at least a card NETWORK management and at least one NETWORK adapter to vMotion, if you can have two vSwitches with two NIC each then I would use explicit order of failover you mentioned.  Hope that helps!

• Recommended for the load of Apple pencil

  I realize that I can plug my Apple pencil in my iPad to load. In addition, provided with the Apple pencil is an adapter of lightning... I used this map of lightning with my Apple 5 watt power adapter and the light provided with my iPhone cable to recharge my pencil to Apple as well. I have not, however, used the lightning with my iPad Pro 12 watt adapter adaptor and cable lightning because I guess it will be dangerous for the pencil of Apple... Am I wrong? In an effort to try to extend the life of my pencil to Apple and not to damage through loading wrong practices, I wonder what Apple recommended to load that my Apple pencil is?

  Should be charge with the power adapter supplied with your iPad Pro.

• Recommendations for the power supply of the inverter of supply for an iMac 27 "SSD (1 TB) 2015?

  I heard that SSDS are vulnerable to data loss / corruption in irregular situation (surges, outages, etc.) and that a UPS is strongly recommended. No one knows what might work best for an iMac 27 "2015 (late) with 1 TB SSD? Amazon best sellers are quite disparate. No. 1 is perhaps not strong enough. N ° 4 seems not to have the OS X compatible software. Being new to this kind of material I don't know what to look for and what would be better for my machine.  It seems consume 240 W max.

  In this regard: I read that store a SSD in hot weather can ruin the drive (or some dr. I considered turning off my computer when I'm away for the summer (in a non air-conditioned office which heat sometimes). I better let him run (sleeping)?

  Thanks in advance.

  A UPS is recommended as soon as you have an irregular situation. It does not matter if you have a hard drive, SSD, or something else.

  240W is the max for the whole iMac.

  Not sure where you hear your horror stories about SSD.

• Recommendations for the resolution of the screen on the W510

  Hi people,

  Recommendations on the resolution of the screen on the W510 - HD or HD +?

  And why?

  TIA,

  SD

  It really depends on your use.  I went with the HD + (1600 x 900), because the graphics card is powerful enough run games of high quality on this resolution and it provides decent realestate to make programming and another office on productivity.  I tried a HD (1280 x 800) screen at work and it is very small and useless for real work, but if you are hard to see or don't use it to calculate the light, he would serve well.  The FHD (1900 x 1080) display provides a lot of realestate, if you can read the tiny text and do a lot of business development type and graphic design works, more multitouch features that can be intreguing there, but I think the screen is a little too big to play video games.  That's my thought.

• Recommendations for the new card GFX for X 51?

  Hi all.  I have a 1st generation X 51, which came with the Geforce GTX 555.  This starts to become a little old now, I'm looking to replace the GFX card.  I am aware that the X 51 a of space restrictions, so will not take any old map.  Can anyone recommend a modern (not necessarily bleeding edge) map, which is fit in a X 51?

  Thanks for the tips!

  Thanks for the recommendations!  I think I'll go to the evga GTX 750ti.

  Thanks for all help on this.

  Lee

• Any recommendations for the Configuration of my 801AP?

  All,

  The configuration for my 801AP is attached.  I would like to hear all the recommendations that the forum members can have on my configuration because it is enough 'vanilla' such that it has been created from the GUI interface.

  I would be grateful of any configuration suggestions relating to security, performance, signal strength, flexibility etc..  This 801AP is used in a domestic environment with consumer devices such as computers, iPhone/iPad, Nintendo Wii, PS2, drive DVD etc.

  Thank you very much for your comments!

  James E

  Seems OK to me.

  To make it difficult for anyone to guess what is your PSK make sure that mix you it with capital letters and numbers.

  You can also put an ACL in your VTY to ensure that only people of a certain IP subnet (such as 192.168.1.0) can access your access point.

  PS: "No encryption service?  I would remove the bit «»

• Looking for recommendations for the best books break the Oracle certification

  Aloha everyone.

  I am interested in taking partner level Oracle SQL and PL/SQL certification exams. I have tried for 3 months to prepare for the exam.

  Please suggest me the best books to crack the following exams:

  (Exam 1): Oracle 12 c basic SQL Database (exam code: exam 1Z0-061)

  (Review 2): Oracle Database 11 G: program PL/SQL (exam code: exam 1Z0-144).

  Thanks in advance.

  (Exam 1): Oracle 12 c basic SQL Database (exam code: exam 1Z0-061)

  (Review 2): Oracle Database 11 G: program PL/SQL (exam code: exam 1Z0-144).

  I maintain a list of equipment, including third party books, for Oracle certifications exploded by review.  The links for these two examinations are:

  Oracle Certification Preparation: Details of the review and preparation of 1Z0-061 resources

  Oracle Certification Preparation: Details of the examination and preparation for 1Z0 - 144 resources

  Regarding the recommendations, 1Z0-061 has an Oracle Press book developed for it. They are almost always a good choice. The only books written specifically for 1Z0-144 is the study guide that I wrote.  In addition, many people have stated in the past that they used the book of Oracle PL/SQL Programming of Steve Feuerstein.