AnyConnect client profile

Similar Questions

• Option 'The Anyconnect client profile' missing in ASDM

  Hello

  I am trying to configure Anyconnect on the SAA and have successfully updated licensing, as well as downloaded the pkg anyconnect for web deployment. I activated anyconnect on the external interface and can now have the ASA push the client machine. Works very well. However, I would like to add the backup servers that the client will attempt to reach where the primary is down. I understand that "customer profiles" can be created to customize the parameters as follows. Problem is, when I followed the setup guide with instructions for the manufacture of customer profiles here:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html#wp1289905

  It shows that I should have an option for the Anyconnect Client profile and settings of the Anyconnect Client.

  I don't have one of these options in ASDM. Here's what it shows mine:

  

  I have another 'Profiles of Client SSL' option, but it does not appear the same as the above.

  

  Can anyone help with what I have to do to get the customer profiles option to be available, so I can add backup server for the customer information? Thank you!

  It could be your version ASDM. I note, however, that the Release Notes for ASDM for 6.3 (1) Note that this version (when combined with the support ASA 8.3 (1)) introduced the AnyConnect profile editor.

  You can run the 6.4 (7) Version ASDM curent with your ASA remaining on 8.2 (1). It would not hurt to try this.

  A little more awkward alternative is to use the stand-alone profile AnyConnect editor and manually deploy the xml profiles that result.

• Cisco AnyConnect Client - specify the certificate store in profile

  Hi all

  Running Cisco AnyConnect Client version 2.5.2019 with Cisco ASA 5510 version 8.4 (1)

  I can't get the work certificate (see attached picture) store profile option. I put this to the user, when it is set correctly it spreads to the customer as you can see in the file of configuration on the client computer, but it does not seem to enter into force.

  When a user is connected which has admin rights, and thus access to two local stores machine and the user must correctly a certificate store of the local computer. I know that there is a valid certificate in the store of users for these users as if I delete the local cert machine it takes so the cert of the user.

  No problem for users without admin rights they do not have access to the local computer store.

  Someone has any ideas why this doesn't work?

  Jason

  Hi Jason

  It seems that the ASA is actually still push the old profile to the client.

  From the CLI, check:

  cache dir: / SC/profiles

  more cache: / SC / profiles /.

  I guess this will show you the old profile.

  How do you have it change exactly? Using the profile in ASDM Editor? You push 'applies' later, do you have errors?

  In any case, use "disk0 more:" to verify that the profile on flash is correct (i.e. that there not the serverlist), then force the ASA to re - load this file using:

  conf t

  WebVPN
  SVC profiles disk0: /.

  Then check "hide: / stc / profiles /" once again to check it took it.

  HTH

  Herbert

• SSL VPN without disabled in ASA5505 after the Activation of the AnyConnect client

  Hello everyone,

  I am facing a problem with the VPN service in ASA 5505. Initially, I was using SSL VPN without customer who was working absolutely fine, no problem. Recently I bought AnyConnect Essentials License with license AnyConnect VPN, Mobile (for focusing on the Client SSL VPN Service for desktop and mobile respectively) and have activated these keys inside of the firewall. After that I may be able to connect to based on the VPN Client, using the AnyConnect client. Clientless VPN access is not allowing you to connect and displays an error (see the attached screenshot).

  I created two VPN profiles Viz, basic (for clientless VPN) and rvsvpn (for client based VPN). Download the AnyConnect Client I can connect to the rvsvpn profile. But if I try to connect using the basic profile, it throws an error has been to what is displayed in the exhibition.

  Please help me in this regard, as what can be done to use both the vpn connection profile. Or what the use of AnyConnect disables client access?

  Waiting for your help.

  Thanks in advance.

  Samrat.

  "Anyconnect essentials" in your configuration command to disable all profiles without customer (as well as other features that require the Premium license).

  Essentials and Premium are mutually exclusive as the performance of duties. You can have both installed licenses, but only use one or the other (and never both at once) in your running configuration.

• AnyConnect client perform on ASA Server cert revocation checking? Can be configured?

  Environment: AnyConnect Secure Mobility Client v 3.1.04066

  The AnyConnect client performs a check of the revocation of the certificate server returned by the SAA during an installation of the VPN program?  If so, should I use the info on the AIA server certificate, or can the OCSP or URL CRLDP be configured in the client?

  And server certificates revocation checking can be disabled (for example in the profile, or an update of the register)?

  Note that I speak NOT of the SAA on the submitted client certificate revocation checking.  All my extensive google-fu could only find information on this topic - but this is different, this is similar to a browser revocation checking on server of a Web site certificate.

  We evaluate using an identity certificate from an internal CA for the VPN profile - but there is a catch-22/egg of the chicken problem if the AnyConnect client performs a check required of OCSP on cert, since there is no access to the OCSP URL until this only after connected. This could be resolved by having for example a CRLDP the external URL to a .crl file, or suppressor revocation checks in the AnyConnect client.

  Thank you!

  I think at some point, this has been replaced of anyconnect, because he was the cause of many problems, but has been reintroduced in anyconnect 4.1, but still not enabled by default. So no, I don't think that the version you are using is doing this.

• AnyConnect client... SSL vs. IPSec

  Hello

  I have a few questions on the Anyconnect VPN remote access.

  The anyconnect client works with SSL or IPSec ISAKMPv2? Y at - it no default or the default method?

  Where you would identify what method you choose? The anyconnect client automatically detects the type (SSL or IPSec)-based VPN server? How does the SSL over IPSec works in this case?  What is new ANyconnect 4.xclient?

  I would say that 90% or more customers use SSL.

  IPsec IKEv2 is used mainly by two categories of people:

  1. those who have need of next gen cryptographic algorithms for legal or regulatory reasons

  2. those who have had lovers, or CCIE candidates configure their VPN (joke - just a little bit)

  Is, when it is implemented correctly, did a good job to secure your traffic.

  The server (for example, the ASA) defines the method and the client that honors due to the associated connection profile that updates / downloads from the server.

  This initial process, even if you have IPsec IKEv2, normally happens over SSL as part of the preamble of IPsec session establishment. Manually, you can eliminate this small, but it is generally more trouble that it's worth.

• Disable the download Anyconnect client / turn off the url connection

  Hello

  Is there a way to disable the Anyconnect client download when you navigate to the anyconnect url? Or just make the connection of the url is not accessible
  While users can still connect with their client anyconnect installed in the corporate network.

  Thank you!

  Dave.

  You can't disable the download directly. This had been discussed several times here at least one CSC who also confirmed a case of TAC. Link.

  A hack is that if your image Anyconnect is an older, users will never invited to be updated.

  Re URL, you can turn off the alias that fill the drop-down list on the web portal, but also long as your have the SSL VPN service active, external interface of the ASA will be used toward the top of the login page to less than the default connection profile.

  What is your reason for wanting to turn off in the first place? Perhaps there is another method to achieve what you want.

• Two remote AnyConnect clients cannot get two voice via softphones?

  We have a situation where two remote users of SSL VPNS cannot establish a voice call via softphones or cookie lync. They can both talk but I can't hear the other. Each user can call external or the office LAN without problems.

  I'm under ASA version 9.1 (5) and v.3.1.05170 AnyConnect. Pretty basic config (purified) - any help would be appreciated!

  # sh run
  : Saved
  :
  ASA Version 9.1 (5)
  !
  host device name
  something.com domain name
  activate the encrypted password
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  encrypted passwd
  names of
  General pool of local pool IP 10.x.x.x - 10.x.x.y
  IP local pool pool-ops-TI 10.y.y.y - 10.y.y.z

  interface GigabitEthernet0/0
  nameif outside
  security-level 0
  IP x.x.x.x where x.x.x.x
  !
  interface GigabitEthernet0/1
  description of the inside interface
  nameif inside
  security-level 100
  IP address y.y.y.y y.y.y.y
  !
  interface GigabitEthernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/6
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/7
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  banner login ***********************************************************************
  connection of the banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
  connection of the banner is a computer network that is private and can be used only in direct
  banner connection explicit owner. The owner reserves the right to
  banner connection monitor use this network to ensure the security of networks and respond
  banner connect on specific allegations of misuse. Use of this network must
  the banner sign a consent to the monitoring of these or other purposes.
  connection banner in addition, the owner reserves the right to consent to a valid
  application of law banner connection to search the network for evidence of a crime
  banner stored within the network connection.
  banner login ***********************************************************************
  banner asdm ***********************************************************************
  asdm banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
  asdm banner is a computer network that is private and can be used only in direct
  banner asdm explicit owner. The owner reserves the right to
  banner asdm monitor use this network to ensure the security of networks and respond
  asdm banner of specific allegations of misuse. Use of this network must
  banner asdm you consent to the monitoring of these or other purposes.
  asdm banner in addition, the owner reserves the right to consent to a valid
  application of law banner asdm to search the network for evidence of a crime
  asdm banner stored within the network.
  banner asdm ***********************************************************************
  boot system Disk0: / asa915-smp - k8.bin
  passive FTP mode
  clock timezone CST - 6
  clock to summer time recurring CDT 1 Sun Mar 1 Sun Nov 02:00 02:00
  DNS lookup field inside
  DNS server-group DefaultDNS
  Server name 192.168.0.0
  Server name 192.168.0.0
  something.com domain name
  Local_LAN_Access list standard access allowed host 0.0.0.0
  pager lines 24
  Enable logging
  timestamp of the record
  exploitation forest-size of the buffer 40960
  logging buffered stored notifications
  logging trap notifications
  record of the mistakes of history
  notifications of logging asdm
  logging - the id of the device hostname
  logging inside 10.0.0.0 host
  logging inside 10.0.0.0 host
  Outside 1500 MTU
  Within 1500 MTU
  IP verify reverse path to the outside interface
  IP verify reverse path inside interface
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any echo outdoors
  ICMP allow any inaccessible outside
  ICMP allow any inside
  ASDM image disk0: / asdm - 721.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
  Route inside 10.0.0.0 255.0.0.0 y.y.y.y 1
  Route inside 192.168.0.0 255.255.0.0 y.y.y.y 1
  Route inside 0.0.0.0 0.0.0.0 y.y.y.y in tunnel
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  test_VPN card-attribute LDAP
  name of the memberOf Group Policy map
  map-value memberOf "CN = test VPN, OR = groups of VPN, OR = Groups, OU = company, DC =, DC =, DC = com" "test VPN".
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server test-deviceauth protocol ldap
  Max - a attempts failed 5
  AAA-server baird-deviceauth (inside) host 192.x.x.x
  Server-port 636
  LDAP-base-dn DC = x, DC =, DC = z
  LDAP-scope subtree
  LDAP-login-password
  LDAP-connection-dn cn = b, OU = Service accounts, DC = x, DC =, DC = z
  enable LDAP over ssl
  microsoft server type
  AAA-server test-rsa Protocol sdi
  AAA-server test-rsa (inside) host
  interval before attempt-3 new
  AAA-server auth-ldap-tes ldap Protocol
  AAA-server test-ldap-auth (inside) host
  Server-port 636
  LDAP-base-dn DC = country, DC = a, DC = com
  LDAP-scope subtree
  LDAP-login-password
  LDAP-connection-dn CN = b, OU = Service accounts, DC = x, DC =, DC = z
  enable LDAP over ssl
  microsoft server type
  LDAP-attribute-map test_VPN
  identity of the user by default-domain LOCAL
  the ssh LOCAL of baird-deviceauth console AAA authentication
  HTTP authentication AAA console LOCAL baird-deviceauth
  serial baird-deviceauth LOCAL console AAA authentication
  Enable http server
  http inside x.x.x.x y.y.y.y
  HTTP 1.1.1.1 255.255.255.0 inside
  redirect http outside 80
  SNMP-server host inside x.x.x.x trap community version 2 c
  SNMP server location
  contact SNMP Server
  SNMP-server community
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Server enable SNMP traps entity power cpu-temperature
  Crypto ipsec pmtu aging infinite - the security association
  Crypto ca trustpoint trustpoint-selfsigned-vpncso
  registration auto
  FQDN
  name of the object CN =, O =, C =, St =, =.
  key pair
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  FQDN
  name of the object CN = OR =, O =, C = St =, =.
  key pair
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  Configure CRL
  Crypto ca trustpoint
  Terminal registration
  Configure CRL
  trustpool crypto ca policy

  Telnet timeout 5
  SSH enable ibou
  SSH stricthostkeycheck
  x.x.x.x inside SSH
  SSH timeout 30
  SSH version 2
  SSH group dh-Group1-sha1 key exchange
  Console timeout 15
  No vpn-addr-assign aaa
  No dhcp vpn-addr-assign
  No ipv6-vpn-addr-assign aaa
  no local ipv6-vpn-addr-assign
  no statistical access list - a threat detection
  no statistical threat detection tcp-interception
  NTP server 1.1.1.1 source inside
  NTP server 2.2.2.2 source inside
  SSL-trust outside ASDM_TrustPoint0 point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
  AnyConnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 2
  AnyConnect profiles baird-client-profile disk0: / customer-baird - profile .xml
  AnyConnect enable
  attributes of Group Policy DfltGrpPolicy
  value of banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
  value of banner is a computer network that is private and can be used only in direct
  banner value explicit owner. The owner reserves the right to
  banner value monitor use this network to ensure the security of networks and respond
  the value of the banner of the specific allegations of misuse. Use of this network must
  value of the banner a consent to the monitoring of these or other purposes.
  value of server DNS 1.1.1.1 2.2.2.2
  VPN - connections 2
  client ssl-VPN-tunnel-Protocol
  Split-tunnel-policy excludespecified
  value of Split-tunnel-network-list Local_LAN_Access
  something.com value by default-field
  Split-dns value something.com, us.something.com
  activate dns split-tunnel-all
  the address value general-pool pools
  WebVPN
  use-smart-tunnel homepage
  AnyConnect value dart modules, nam
  AnyConnect value profiles baird-client-profile user type
  AnyConnect ask flawless anyconnect
  Group Policy 'test' internal
  Group Policy attributes 'test '.
  Split-tunnel-policy excludespecified
  value of Split-tunnel-network-list Local_LAN_Access
  activate dns split-tunnel-all
  the address value it-ops-pool pools
  internal testMacs group policy
  attributes of the strategy of group testMacs
  WINS server no
  value of server DNS 1.1.1.1 2.2.2.2
  client ssl-VPN-tunnel-Protocol
  field default value xyz.com
  username admin privilege 15 encrypted password
  attributes global-tunnel-group DefaultRAGroup
  test-rsa authentication-server-group
  test-ldap-auth authorization-server-group
  management of the password password-expire-to-days 10
  tunnel-group DefaultRAGroup webvpn-attributes
  the aaa authentication certificate
  attributes global-tunnel-group DefaultWEBVPNGroup
  test-rsa authentication-server-group
  test-ldap-auth authorization-server-group
  management of the password password-expire-to-days 10
  tunnel-group DefaultWEBVPNGroup webvpn-attributes
  the aaa authentication certificate
  tunnel-group test remote access connection type
  tunnel-group test-Connect General attributes
  test-rsa authentication-server-group
  test-ldap-auth authorization-server-group
  management of the password password-expire-to-days 10
  tunnel-group test connection webvpn-attributes
  the aaa authentication certificate
  allow group-url http://abc.xyz.com
  allow group-url https://abc.xyz.rwbaird.com
  type tunnel-group testMacs remote access
  tunnel-group testMacs General-attributes
  test-rsa authentication-server-group
  test-ldap-auth authorization-server-group
  Group Policy - by default-testMacs
  management of the password password-expire-to-days 10
  use-set-name of the secondary-username-of-certificate
  tunnel-group testMacs webvpn-attributes
  allow group-url http://abc.xyz.com/macs
  allow group-url https://abc.xyz.com/macs
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory 26
  Subscribe to alert-group configuration periodic monthly 26
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:aa675139dc84529791f9aaba46eb17f9
  : end

  I confess that I have not read your config in detail, but a few tips:

  -If you do split tunnel, don't forget to push a route for the entire pool VPN subnet or subnets of VPN clients

  -Make sure you have the same-security-traffic permitted intra-interface

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa81/command/ref/refg...

  -If you use NAT, you must exclude such NAT inter-VPN-device traffic

  -If you have ACLs (not shown) do not forget to leave your pool VPN subnet is talking to himself.  Generally, it would be in the ACL entering the external interface.

  at the end of the packet - trace is your friend.

  NGP

• AnyConnect client reconnects after 1 minute

  AnyConnect client reconnects after 1 minute; WHY

  version 3.1.02026

  ASA:asa911 - k8.bin

  [25/04/2013 08:16:11] Establish the VPN session...

  [25/04/2013 08:16:11] Checking for updates to profile...

  [25/04/2013 08:16:11] Checking for updates...

  [25/04/2013 08:16:11] Checking for updates of customization...

  [25/04/2013 08:16:11] Execution of required updates...

  [25/04/2013 08:16:12] Establish the VPN session...

  [25/04/2013 08:16:12] Setting up VPN - initiate the connection...

  [25/04/2013 08:16:12] Setting up VPN - examining the system...

  [25/04/2013 08:16:12] Setting up VPN - activation card VPN...

  [25/04/2013 08:16:15] Setting up VPN - configuration system...

  [25/04/2013 08:16:16] Establish a VPN...

  [25/04/2013 08:16:16] Connected to my.vpn.com.

  [25/04/2013 08:16:16] Connected to my.vpn.com.

  [25/04/2013 08:17:19] Reconnection to my.vpn.com...

  [25/04/2013 08:17:19] Setting up VPN - examining the system...

  [25/04/2013 08:17:24] Setting up VPN - activation card VPN...

  [25/04/2013 08:17:25] Setting up VPN - configuration system...

  [25/04/2013 08:17:25] Establish a VPN...

  [25/04/2013 08:17:25] Connected to my.vpn.com.

  [25/04/2013 08:17:25] Reconnection to my.vpn.com...

  [25/04/2013 08:17:25] Setting up VPN - examining the system...

  [25/04/2013 08:17:25] Setting up VPN - activation card VPN...

  [25/04/2013 08:17:25] Setting up VPN - configuration system...

  [25/04/2013 08:17:25] Establish a VPN...

  [25/04/2013 08:17:25] Connected to my.vpn.com.

  [25/04/2013 08:16:11] Establish the VPN session...

  [25/04/2013 08:16:11] Checking for updates to profile...

  [25/04/2013 08:16:11] Checking for updates...

  [25/04/2013 08:16:11] Checking for updates of customization...

  [25/04/2013 08:16:11] Execution of required updates...

  [25/04/2013 08:16:12] Establish the VPN session...

  [25/04/2013 08:16:12] Setting up VPN - initiate the connection...

  [25/04/2013 08:16:12] Setting up VPN - examining the system...

  [25/04/2013 08:16:12] Setting up VPN - activation card VPN...

  [25/04/2013 08:16:15] Setting up VPN - configuration system...

  [25/04/2013 08:16:16] Establish a VPN...

  [25/04/2013 08:16:16] Connected to my.vpn.com.

  [25/04/2013 08:16:16] Connected to my.vpn.com.

  [25/04/2013 08:17:19] Reconnection to my.vpn.com...

  [25/04/2013 08:17:19] Setting up VPN - examining the system...

  [25/04/2013 08:17:24] Setting up VPN - activation card VPN...

  [25/04/2013 08:17:25] Setting up VPN - configuration system...

  [25/04/2013 08:17:25] Establish a VPN...

  [25/04/2013 08:17:25] Connected to my.vpn.com.

  [25/04/2013 08:17:25] Reconnection to my.vpn.com...

  [25/04/2013 08:17:25] Setting up VPN - examining the system...

  [25/04/2013 08:17:25] Setting up VPN - activation card VPN...

  [25/04/2013 08:17:25] Setting up VPN - configuration system...

  [25/04/2013 08:17:25] Establish a VPN...

  [25/04/2013 08:17:25] Connected to my.vpn.com.

  the newspaper is not enough

  Get more journal of asa

  Sent by Cisco Support technique iPad App

• AnyConnect client has persistent settings after uninstall

  Usually, I'm able to type in the address field of client anyconnect and change to another client (we are a partner that support many people).

  For some reason any has my client anyconnect 'infranet-cm0' and 'infranet-cups"(our call manager and presence servers) in the connection to the domain, and you cannot type in this area. It makes no sense at all... Need just the certificates on my system or something.

  I uninstalled the client several times and launched from web client I am trying to connect to - download the new client, but he always comes back to the top with these two options to connect. I have attached a screenshot.

  How can I get rid of these options and allow me to be still able to type in the address?

  Have you tried to delete the profile?

  Client deployment paths

  OPERATING SYSTEM	The directory path
  Windows 7 and Vista	C:\ProgramData\Cisco\Cisco AnyConnect secure mobility Client\Profile\
  Windows XP	C:\Document and Settings\All Users\Application Data\Cisco\Cisco AnyConnect secure mobility Client\Profile
  Mac OS X and Linux	/ opt/cisco/anyconnect/profile /.

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect31/Administration/Guide/ac02asaconfig.html#wp1595490

• How to remove entries or register a new in the drop-down list of the Anyconnect client?

  I have a user who uses Anyconnect for quite awhile now, and we have activated the ASA profiles a few times over the past year.

  My client seems very well, but maybe also because I have a new laptop without the previous hidden settings.

  The problem: old entries in the 'box' connection to still appear and if I type a new entry it will connect but not save it as a connection profile.

  If I start from scratch by uninstalling the client, ranging on the external right site (vpn.mydomain.com), it will automatically install the customer very well yet.  But the client install still just shows the old entries and not the correct (what should the list as vpn.mydomain.com).

  I deleted the entries in personal profile under c:\users\username\appdata\local\Cisco and that to remove an entry, but the other is still there and I can't find where on the system, it is stored.

  However, the great thing is that it does not save the correct entry of vpn.mydomain.com in the list of connections, so the user must either enter it and click on connect manually or if they have to go to the website https://vpn.mydomain.com and connect via the site itself.

  Any ideas on how to get this fixed so that his client only shows the correct host in the customer?

  On Windows, see C:\ProgramData\Cisco\Cisco AnyConnect guarantee mobility Client\Profile. profile entries must complete this directory.

  New connections should add profiles or you can construct one manually using the following simple model, replacing it with your values where I typed xxxx:

  http://schemas.xmlsoap.org/encoding/">."

  xxx

  xxx.xxx.xxx.xxx

  SSL

  There are many more entries in option, but it's a bone at naked one.

• Using VPN to push the update of the AnyConnect client

  Hello - we would use our ASA VPN device to push the latest AnyConnect to our user base. Previously, due to the requirement that the user has administrator rights to install, we could not do this and had to return to SCCM to push upgrades the AnyConnect client. We now have software that will allow the client to load as an administrator, even if the user is not an administrator on the system. Viewfinity is the name of the software.

  My question is on the speed control. I don't want to set up the VPN to push the new AnyConnect, and every user who logs in then gets the installation. We would rather control, based on the group if possible, which gets the new client. This limits the risk if there is a problem to a subset of VPN users and not all that connect and you're trying to download. I can't find a config or config guide which indicates that it is possible. What is there, no one knows if it is or isn't an option? If this isn't the case, we would have to assume a lot of risk for new customers of 1100 deployment in a day, a number of type we plugged on any given business day. Please notify.

  Thank you very much for your help.

  The f

  Hi Jeff,

  There is no option to enable the auto update by connecton profile.

  What you can do however, is to disable this feature on the XML profile, since the XML profile can be defined by group policy, you simply deploy the profile either by having users connect to the specific group tunnel where group policy with the No auto update profile XML or deploy the XML profile manually on each machine.

  Please see this:

  Automatic update	true	(Default) Automatically install new packages.
  	fake	Doesn't install new pacakges.

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac13vpnxmlref.html#wp1220030

  In the profile XML (to disable):

  fake

  Where to find the profile?

  OPERATING SYSTEM	The directory path
  Windows 7 and Vista	C:\ProgramData\Cisco\Cisco AnyConnect secure mobility Client\Profile\
  Windows XP	C:\Document and Settings\All Users\Application Data\Cisco\Cisco AnyConnect secure mobility Client\Profile
  MAC OS X and Linux	/ opt/cisco/anyconnect/profile /.

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html#wp1409000

  Let me know.

  Thank you.

  Portu.

  Please note all messages that you find useful.

  Post edited by: Javier Portuguez

• What is net framework client profile 4?

  I need net framework 4 client profile I downloaded myself I think ws suppose it is. I have windows xp 32-bit, what is it year I delete it. Thank you

  Hello

  1. What service pack is installed on the computer?

  To check the version of the control of the service pack installed, the steps below.

  (a) click Start,

  (b) select run

  (c) type Winver, and then press ENTER.

  The Microsoft .NET Framework 4 Client Profile (standalone installer) is available for Windows XP SP3 (Service Pack 3).

  Visit the link below to download Microsoft .NET Framework 4 Client Profile (standalone installer) for Windows XP SP3.

  http://www.Microsoft.com/download/en/details.aspx?ID=24872

  In case you do not have Windows XP SP3 installed on the computer, visit the link below to download and install Windows XP SP3 as Windows XP SP3 offers many updates for performance and reliability.

  Reference:

  http://support.Microsoft.com/kb/950717

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389

• tell me if I need net framework client profile 4 I have nothing from what I've read I don't need.

  could smeone please tell me if I need net framework client profile 4, there is a computer at home, and from what I can tell I don't need her. I downloaded at the same time me, misunderstanding of what it was, I tried to date to remove it but it says I must first of all remove the readme?  I windoiws xp, 86 seems to me it is a position that would use it.    How do we uninstall it because updates are not takeing a reason either. . have you noticed that windows update keeps, at least my's for some reason any. I noticed elsewhere on this forum about updates r repeating themselves.  I appreciate all the help. Thank you

  The other post:

  OK now I have these updates already on my computer, kb2604092, added on 10/05/12, kb2686828, added on 14/06/12 and kb2656369 v2 that they keep appears for me to download them even on microsoft update web page. So what's left to do about it?  In addition, does not update kb2600217 for xp netframework 4. Download but it does not update so it does all the time if you put your computer in the usual way, then what to do? also, what I do an update for card smart base kb909520. I do not have any suppliers or what it is for?

  I have updates to appear that I kb2686828 serv.pk 2 2 installled framework 6/14 and kb26546369v2 Framework 2 ser.pk 2. He always tells me that I've updated, but they are not installed. and here is one that is used to install on the 4 customer profile. I'll tell u more when I only if there is more to say. I see a lot of people r having the same problem.thanks

  Hi cindysanborn,

  To avoid confusion, I closed your other new posts and took note of them here.  Please give us the updates or any other matter in this original thread. :)

  With regard to your question, please take a peek in here with a troubleshooting section.

  I hope this helps!

• Download "Microsoft 4 Client Profile,.

  What is "Microsoft 4 Client Profile" downloading, is that business?  I looked on the site, and it says something about Artitecture.  If this is the case, I guess I ' remove it.  That Trojan Aescford had blocked my internet connection and opened a "1394", when I noticed that, I blocked and there are now out there.  I know there is still a problem, or more because of the different things, can't really explain, I don't know.  I got a future service in my computer and they supposed to be cleaned, but I still think that somethings is wrong.  When I open the Device Manager, I saw the same old "1394" only he says 'Controller of Bus' so I disabled it, before that the Pros even did anything, too, has something called "Microcode" something, so disabled it, and I'm not that smart where computers are concerned.  I would like to disable more things, but I'm not sure, then don't.  Get this Trojan of course makes me paranoid and almost too afraid to do anything on the internet.

  Hello

  The services that you used to own things, what measures they played?

  The .NET Framework (pronounced dot net) is a software framework that runs on Microsoft Windows. It includes a large library and provides the interoperability of languages (each language can use code written in other languages) in several programming languages

  For more information regarding Microsoft customer profile, click on the link below.
  http://support.Microsoft.com/kb/982670

  1394 serial bus is a simple, economic and efficient interconnection of storage high-speed imaging and many new types of audio/video (A / V) devices easily, no need to install separate drivers. On a computer running a current version of Microsoft
  Operating system Windows, the 1394 bus also provides an easy network interface and is able to support the IP transport and media isochronous streaming (AV/C).

  Note: Virus, the only way to be sure that the machine is 100% sure then is to format and reinstall:

  Cleaning a compromised system: http://technet.microsoft.com/en-us/library/cc700813.aspx

  Hope this information is useful.