AnyConnect disconnects the client after clicking on "accept".

Similar Questions

• PC disconnects the VPN after several hours, can not reconnect until you restart the PC.

  Hello

  I started to use a VPN private for a video game in general since last month, but I started to run into a problem, I can't fix... my PC tends to disconnect the VPN after awhile (6 ~ 12 hours of use?) and I can't reconnect to any VPN until I restart my PC.

  However... my normal internet connection seems to work very well.

  When I try to reconnect to the VPN after I fell, I'm greeted by this error:
  http://PUU.sh/bicqT/0a6f1f8537.PNG

  I'm on Windows 7 64 bit and I use the VPN client by default windows... idk what's his name, it's putting you in the network and sharing Center.

  I tried the following things:
  * restart the network map
  diagnose the issue with windows network diagnostics 7
  * / Clear DNS cache
  * / release and / renew lease
  * reset the internet connection
  * using the internet connection of a neighbor and I am still unable to connect to any VPN until you restart the PC.

  -diagnosis after disconnecting from the VPN wireless adapter arrives leads to this...
  http://PUU.sh/bibQs/9873c02068.PNG
  http://PUU.sh/bibn7/93ec6f0934.PNG
  http://PUU.sh/biboF/3c9f865f15.PNG
  http://PUU.sh/bibpw/b204c59f01.PNG
  http://PUU.sh/bibq9/a10d3246d1.PNG

  I can't fix it through diagnostics.

  In any case, this is a problem on my end because I share the VPN with 2 other friends and they do not suffer this problem... > _

  If there is a lack of information, please tell me and I will provide.

  Thanks for any help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• How do you change your bc intial model selection under options the site after clicking on finish

  How do you change your bc intial model selection under options the site after clicking on finish

  You can't do that. BC is not a system of theming like Wordpress or Joomla. The model is fixed and models of switching at this stage is not an easy feat.

• Win2008R2 domain controllers; Restart the domain controllers disconnects the client

  * Original title: DC reboot causes disconnection of the clinets

  We have 2 controllers Doamin of Win2008R2. When a domain controller restarts, all the APs on some clients (Telnet, MSTSC ex...) Win7 will cut soon. There is no error/kingdoms fighters on the client event log. WinXP will never suffer.

  What can I do? Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• H - REAP: difficulty to obtain the IP address for the client after loss of control

  Hello

  I have configured the following:

  -H - HARVEST Wlan

  -AP PM-HARVEST

  -There is no trunk on the access port, so "Support Vlan" is disabled in the configuration of the AP. Because I want the Capwap data and the data on the same vlan REAP H of transit.

  -J' have controller 5508 version 6.0.182.0

  The first time that I connect with my PC for Wlan H-REAP, I get an Ip address

  I see the DHCP from the AP request.

  I can disconnect and reconnect several times with my PC, and I get all the time an IP address.

  Then I disconnect the connection between the AP and the WLC, and I reconnect after a few minutes. (If the controller is again joined by AP)

  Then, when I try to connect to the Wlan REAP H, it is impossible to obtain the Ip address. I don't see "dhcp - discover" coming out of the AP.

  I have a message in the log of the AP: "customer 0018.de6a.3058 had 1 AES-CCMP TSC replays."

  Similarly, if I reload the AP, the problem is still there.

  The only way I found to solve the problem is to change something in the config of H-harvest-Wlan and apply it.

  You have an idea?

  Michel Misonne

  I'll make a guess savage and say that you have WMM disabled on the WLAN...  Enable WMM (supported) or upgrade to 6.0.196.0 (if WMM is disabled..)

• Menu text freezes on the screen after clicking

  Hello!

  Whenever I click on an option in Photoshop CC, the menu button is frozen on the screen. I will attach a few pictures to better illustrate the problem.

  This is my screen after the opening and closing of a file. The respective part of the menu remains frozen on the screen:

  

  After clicking on a plugin button in the menu "filter":

  

  

  It happens every time on any button. The only way to erase the screen-ahem, the only way I know - is through the control panel screen resolution. I just have to go to a different resolution in both directions, and it works. The thing is, this bug will come back as soon as I use the menu, which is, thus, very often because I rely heavily on some plugins or actions with no shortcuts.

  I have Windows 7 64 bit, an ATI Radeon HD 6500 M graphics card and a Bamboo of Wacom tablet.

  I have to guess a video driver problem (upgrade from AMD site), or a utility program that mess with menu design and has a few bugs.

• Keep the Image of the button after click

  Hello world!

  CS4/AS3 user here...

  Does anyone know how to hold a button image after top? Can you only do this with a clip?

  THX!

  If you mean you want graphics in the buttons down from chassis to stay visible after clicking on the button, which is not possible with a touch of true/simple.  You must use a movieclip button.

• After you have configured Anyconnect using the client of the wizard is unable to connect to Internet

  Hello

  I have a small Setup w/8.4 ASA - 5520. Outside goes to Internet, the inside is 172.17.0.0/16 network and management is 172.17.2.0/24. VPN IP pool is 172.17.8.0/24.

  After that I configured webvpn with the wizard, I have VPN into a fine, ping other IP switches and routers (ASA is running EIGRP and distributing its static route to the internet to its neighbors). I have Setup nat to allow for Internet access from the inside to the outside, use off interface as the translated source.

  After I VPN in, I am assigned a correct address for my pool VPN (172.17.8.21 for example). I can't ping or connect on the Internet however. Newspapers reveal nothing, I don't see any rejected packets. I can't reach the management either network. The management network is a switch that has all the ports of the management of the different switches, faders load, etc on this subject, but I can't access it.

  I wonder what type of NAT configuration, I have to do here and how to I'm to deny access to the Web interface and management, but nothing appears in newspapers despite debugging setup and open the firewall until completely bringing all traffic.

  The security level is 90 for the Interior and 0 to 100 outside management. The possibility of allowing equal security level interfaces pass traffic is selected. I got inside and the management to 100 before and it did not work with VPN.

  Please help, I do not have my config ASA handy ATM, but I will by hand in a few hours.

  I was wondering if anyone has recommendations on the use of NAT so I can get access, I need.

  Thanks in advance

  Patrick,

  Do not have access to an ASA myself so the commands below are not soundproof.

  But I guess if you're missing config NAT, it would be the document describing:

  https://supportforums.Cisco.com/docs/doc-11640

  To access the management, good show use some newspapers :-)

  show xlate det | I have IP_ADD (for source and destination IP)

  Show logg. I have IP_ADD (make sire logging is enabled for buffering on the level of information and to do for the source and destination)

  Marcin

• deletion line causes the error after clicking on the button Delete: oracle Apex 5.0

  helloo...

  Use: Under shape whenever I checked and click on Remove button works fine.

  According to the need on my project, I took a default editable TEXT FIELD. Now, I did this TEXT FIELD on the SCREEN only.

  so now if click the button Delete after checking the check box I get below error.

  Session state protection violation:

  This can be caused by manually editing the protected element p11_total.

  Thank you

  Pranav shah

  Hi Dominique,.

  Pranav.Shah wrote:

  helloo...

  Use: Under shape whenever I checked and click on Remove button works fine.

  According to the need on my project, I took a default editable TEXT FIELD. Now, I did this TEXT FIELD on the SCREEN only.

  so now if click the button Delete after checking the check box I get below error.

  Session state protection violation:

  This can be caused by manually editing the protected element p11_total.

  Thank you

  Pranav shah

  Change your display-only item and do save the State of session No.

  or create the sample on apex.oracle.com and share credentials with us.

  Kind regards

  Jitendra

• When I click on the exe that the thing charge to the taskbar and not going on the bureau after clicking

  When I click on the exe of firefox it loads my homepage but it does not load on the desktop it remains in the taskbar and when I put the cursor on it I can see the loading of the page but when I try to access it pop on the desktop, nothing happens uninstall a fact a reinstalled same prob a repair done same problem did a system restore and the sill not duty use google desktop chrome and I hate thatbold text

  computer resarted couldn't always get firefox will appear so I rebooted my system operating safely moce and reset all default settings on firefox resarted computer and it works now just need to find the bad addon now

• Windows blocked to disconnect the screen after trying to stop

  I put in this forum, as the other post was in the wrong forum.
  Windows Vista Home Edition on a HP desktop computer. I try to stop, and the rest of the computer with logging off the screen with the little circle thingy goes round and round. It doesn't go away until I have press and hold the power button for a while then turns off the computer. It will not stop by itself. When I restart it once I get it shut down with the power button, it gives me a screen saying windows was not shut down properly and gives me different choices on how to restart it. I choose start windows normally and windows starts fine, but will not be closed. It gets stuck at logging off the screen. What the heck is wrong?

  I did the boot, but that did not help either. I scanned with Adaware SE, but he found nothing. The computer would leave answering programs as long it has been used. I tried to install the updates for Vista which took forever because he would leave just to install the updates. Finally, after many trials and lots of swearing, I got all the updates that are installed and the HP updates. I installed AVG and it had to scan the computer. He found nothing. It seems that updates could have solved the problem.

• ORA-12170 of the client after installing 12102

  I installed 12102 on Linux.  In all my 11g install, our standard is to use dynamic record for each instance in the listener.  Then you remove the listener.ora file which allows dynamic registration in 11g.  We also use a listener shared by server... so I disabled the LOCAL_LISTENER parameter by alter system set local_listener = ";  I have found no record of this has changed in the 12 c install.  I found that a new process LREG registers the instance instead of PMON... but it's all working.  My cases are recorded in the listener... yet I can't connect from a client or another server using the standard tnsnames.ora.  What Miss me?  Nothing don't watch even in my journal of the listener that is trying to connect...

  ORA-12170 is one out of connection time.

  From there, we can draw some conclusions

  (1) your network service name WAS resolved to a connection string - left the tnsnames or a direct specifications.  We know because the request got fairly far from actually solved in a host address and an attempt was made to send the request to the specified host.

  (2) most likely, your application never made to the host.  He timed out waiting for a response from the host, he would have received if the request had never got there.  If the request had gotten to the listener, then failed for some reason, the error would be different.

  So, what does this leave us with?

  (1) the HOST = specification in your clien t tnsnames (or another method of specifying) is invalid, pointing to a non-existent host

  (2) there is a firewall blocking the transmission of your client to your HOST

• visible row in the ListView after click

  in ListView

  visible area

  +---------------+  <--- 0 y

  |                |

  |  line 79 |

  line 80 + -+ <-536 y

  assuming that 80 line we did between 530 and 540 's position.
  my visible area is 536
  then click on line 80 How to make it would you like in the correct position
  the visible area, that is to say in the last line of the visible area? ?

  
  

  
  

  Thank you to
  

  VirtualFlow vf = (VirtualFlow) this.lookup ("VirtualFlow");

  VF. Show (line);

  Note: this solution does not use the standard javafx api public, so it's at the risk of everyone to use such a solution, if anyone has a better solution please post.

  I will contact jira thereon.

• How to I take the EULA?  I click on accept, but he is stuck in a loop - the window disappears and reappears then asking me to accept again.

  I just downloaded Illustrator, but cannot open it.  The EULA window appears when I run the application, but the curls on itself whenever I click on accept.

  Hi Seomener,

  This document can help: the software license contract reappears after clicking on accept.

  If this does not resolve the problem, please let us know more details such as the products that you are trying to install and your operating system.

  Best,

  Del

• Keep the Focus on the button after mouse click

  Hello

  I have a button in my VI that triggers a function. I would like to know how can I keep the focus on the button after clicking with the mouse over it? I ask that because I want that after the first click, the focus is kept on the button then I can activate the button with the space bar.

  I know I can hit the button with "tab" and then use SPACEBAR, or I can put another key to toggle this button.   But the behavior that I'm trying to get is: 'after the first click on the button for the first time, emphasis is stored on it and then I can use the space bar to activate the button.

  Ideas?

  Thank you.

  Dan07.

  I found the solution. Using a property node, set to True KeyFocus.

  Thank you.

  Dan07.