Windows blocked to disconnect the screen after trying to stop

Similar Questions

• I lost my laptop screen after trying to set my display properties. I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it. What gives?

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  "Ineedafix" wrote in message News: * e-mail address is removed from the privacy * .com...

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  Start the computer in safe mode (press F8 continuously immediately after power and don't worry beeps when you press the button) and let it boot without a network.  Once there right click on the desktop and then click Properties.  Click settings and the value of the monitor mode (640 X 480) VGA or SVGA (800 X 600).  Accept the changes and restart the computer.  You should have a mediocre screen, but you should see it now.  Download and install the appropriate drivers for your video card in the laptop to the web site of the manufacturer of the laptop.  Install the drivers and then you should be able to set the display of the laptop to the correct native resolution for your computer monitor (must be in the documentation of the laptop).

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• My Windows Vista crashed on the screen is blue, can not not rebooted, can't not to start, f8, f9, f10 does nothing

  HI.my windows vista crashed.i have recovery disk, but when I do I see this messege:windows in not shoting down full and can not read boot file.and whene I want low shoting or restart I have blue screen.

  Hi, Mohammad Ali G,.

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  See the article below

  
  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  Step 2: See the steps mentioned in the link below

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the recovery of the computer back to factory settings, you must contact the manufacturer of the computer.

  Note: Restoration of factor is a favorable condition of a computer as that set up by the manufacturer of the computer and is specific to the manufacturer. This process will put the computer to its original factory condition, data (and programs that were installed later) on the computer will be lost.

  You may need to check the documentation that came with the computer to Factory Restore (System Restore) or contact the computer manufacturer.

  Important: It is recommended to make a backup of your data before performing any Installation of Windows.

• PC disconnects the VPN after several hours, can not reconnect until you restart the PC.

  Hello

  I started to use a VPN private for a video game in general since last month, but I started to run into a problem, I can't fix... my PC tends to disconnect the VPN after awhile (6 ~ 12 hours of use?) and I can't reconnect to any VPN until I restart my PC.

  However... my normal internet connection seems to work very well.

  When I try to reconnect to the VPN after I fell, I'm greeted by this error:
  http://PUU.sh/bicqT/0a6f1f8537.PNG

  I'm on Windows 7 64 bit and I use the VPN client by default windows... idk what's his name, it's putting you in the network and sharing Center.

  I tried the following things:
  * restart the network map
  diagnose the issue with windows network diagnostics 7
  * / Clear DNS cache
  * / release and / renew lease
  * reset the internet connection
  * using the internet connection of a neighbor and I am still unable to connect to any VPN until you restart the PC.

  -diagnosis after disconnecting from the VPN wireless adapter arrives leads to this...
  http://PUU.sh/bibQs/9873c02068.PNG
  http://PUU.sh/bibn7/93ec6f0934.PNG
  http://PUU.sh/biboF/3c9f865f15.PNG
  http://PUU.sh/bibpw/b204c59f01.PNG
  http://PUU.sh/bibq9/a10d3246d1.PNG

  I can't fix it through diagnostics.

  In any case, this is a problem on my end because I share the VPN with 2 other friends and they do not suffer this problem... > _

  If there is a lack of information, please tell me and I will provide.

  Thanks for any help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• When I start with Windows XP Home Edition, the screen appears, only the mouse arrow. Help!

  When I start with Windows XP Home Edition, the screen appears, only the mouse arrow.  Help!

  Hi stevejager,

  ·         Remember to make changes?

  ·         You receive an error when starting?

  ·         Have you tried booting in safe mode?

  Method 1: First of all, we will try to start the computer in last good known Configuration and see if it boots.

  Method 2: If it is impossible to start, try to start in safe mode. If able to start and then try to perform a System Restore, since this is a recent problem that has occurred.

  Method 3: Follow the steps in the below article mentioned.

  Computer stops responding with a black screen when you start Windows XP

• Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't. The following will install manually or with automatic updating.

  Component of Windows Installer keeps poping up services.msc tried to stop but he comes back a few seconds, a few times it will not be quick to stop also tried msiexec unreg won't.  The following will install manually or with automatic updating.

  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update for Windows 2000, Windows Server 2003 and Windows XP x 86 (KB979909)
  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)
  Update Microsoft .NET Framework 3.5 SP1 for Windows Server 2003 and Windows XP x 86 (KB982168)
  Security Update for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB983583)
  Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)
  Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381)
  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86

  Hello

  ·        Since when are you facing this problem?

  Windows Installer service is damaged. I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned below.

  Step 1:

   

  a. click on "Start" and then click on 'run '.

  b. type 'cmd' or 'command' in the box and click on 'OK '.

  c. type each of the following commands, and press 'Enter' after all the world:

  CD %windir%\system32

  Ren msi.dll msi.old

  Ren msiexec.exe msiexec.old

  Ren msihnd.dll msihnd.old

  output

  d. Type "exit" at the command prompt to close the command utility.

  e. restart your computer.

  Step 2:

  Download Windows Installer from the following link and install it on the system and see if the problem is resolved.

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

   

  Method 2:

  I suggest to reset the Windows Update components and then try to install updates on the system and check. Follow the steps mentioned below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  For more reference, click on the link below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• AnyConnect disconnects the client after clicking on "accept".

  AnyConnect disconnects the client after clicking on "accept". Our seller is using Windows Server R2 2012.

  We see that the client passes authentication and connects then disconnects quickly without establishing a session.

  Anyconnect version is 4.2.01035

  Hi Carolina,.

  You can see this windows server operating system is not officially supported / tested platform for anyconnect: -.

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

  You can still install the anyconnect DART diagnostic tool and then check the errors on the newspapers.

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/ANYC...

  You could probably run "debug webvpn anyconnect 255" to check the logs to see where the connection has failed

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• I can't access firefox, everytime I try I get that windows does not find the file, I tried it redownloading but he still gave me the same message?

  I can't access firefox, everytime I try I get that windows does not find the file, I tried to download again, but he still gave me the same message. the problem has nothing to do with my internet because it freaks on the internet explore and everythign is fine, just my computer can not access firefox for some reason any. I tried uninstallign it and then install again, but that did not work, I tried to install a different version and it still doesn't work.

  yesterday

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; MSDigitalLocker; FunWebProducts; GTB6; .NET CLR 2.0.50727; InfoPath.2; .NET CLR 1.1.4322; OfficeLiveConnector.1.3; OfficeLivePatch.0.0 .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  I'm sorry, but you have not answered my questions.

  (1) on the last stage Setup lets you start Firefox, if you keep all of the checkbox "Launch Firefox now", turns on Firefox when you click on "Finish"?

  (2) how did you launch Firefox when you receive the error message? How do you 'by clicking on the freshly installed target Firefox.exe?

  (3) what is the exact error message? (Post a screenshot if you cannot re-type precisely). Text you have posted it lacks an ending quotation mark and does not resemble any message I know.

• Refresh the screen after the removal of the UI elements

  Hello world

  I create a screen in which I use listfield to display data online as a way each line has a button Delete. I want to know how to refresh the screen after the deletion of data or a row of the screen?

  Because you actually using a HorizontalFieldManager to display each line, to remove it, you must remove the information in the underlying data store and then delete it HFM of his Manager.  That's it, removing the HFM will refresh the screen.

• PC/tablet-is there a laboratory touchscreen top that works on windows 7 / 8, where the screen can detach the keyboard to use in the form of tablets, or screen can be reached for keyboard vertically or horizontally?

  Labtop / Tablet question -I'm shopping for a new Labtop.    Is there a laboratory touchscreen top that works on windows 7 / 8, where the screen can detach the keyboard used in the form of tablets and then transformed (with long vertical side) and attached to the keyboard to type a length full page (8.5 x 11 page) and then returned (long horizontal side) one attached to the keyboard (to be used as a stand) for a movie with all the features of present characteristics of a top laboratory such as 4 to 8 GB memory and a 500 GB hard drive (perhaps as part of the screen or connected to / through the keyboard, if it is used as a docking station)?

  It seems with all the technology of the tablet on the market that Microsoft or somebody would do something like that now.  Can someone help me? Thank you

  -Scott M

  PS: My wife has an ASUS transformer where the screen detaches from the keyboard, so it can be used in the form of tablets.  When it is attached to the keyboard, the keyboard acts as a stand to sit on the counter for watching movies.  And then the keyboard and the screen can fold them together, so when it is closed there is a stand-alone case. This, however, runs the Android operating system.  Basically, I want this same design (for the potability in a Briefcase), but with it running Microsoft Windows so it can be used as any other labtop.  It the keyboard could have a number pad are associated with, that would be a bonus.

  Hi pr-e-s,.

  You can check with asus.

  http://us.Acer.com/AC/en/us/content/home

  http://us.Acer.com/AC/en/us/content/group/notebooks

  http://us.Acer.com/AC/en/us/content/group/notebooks

• Hi, I also have a similar problem with my asus s550cm and whenever I try to access windows update window blocking, here is the link to my dmp file.

  Separated from this thread.

  Hi, I also have a similar problem with my asus s550cm and whenever I try to access windows update window blocking, here is the link to my dmp file.

  https://onedrive.live.com/redir?RESID=7D3CCE252116AC94%211981

  http://1drv.Ms/1F2ZEzq

  Thank you

  Separated from this thread.

  Hi, I also have a similar problem with my asus s550cm and whenever I try to access windows update window blocking, here is the link to my dmp file.

  https://onedrive.live.com/redir?RESID=7D3CCE252116AC94%211981

  http://1drv.Ms/1F2ZEzq

  Thank you

  Follow the steps in the link below, then try to update windows again.

  Difficulty errors of corruption of Windows by using the DISM tool / system update readiness.

  http://support.Microsoft.com/en-us/KB/947821

• Stuck on blue HP Invent screen and not loading Windows not items on the desktop after you done a system recovery

  Hello, this is my first time posting here, because I'm in desperate mode!  I have a HP Pavilion Slimline s5304y using Windows 7, desktop pc that I bought in February 2010.

  After getting a virus on my computer, I ordered system of HP recovery disks, and made to factory settings recovery process (twice!), however, during the Windows install process, it never cross the blue HP Invent screen that says:

  -Do not turn off your PC during this unique installation process

  -Your PC will restart several times during the installation process

  -Messages may appear on your screen. Ignore these messages until you are prompted to restart or shut down your PC

  To the bottom of the screen, it keeps saying "Please wait...". "with a green scroll bar. What I see is the buttom to start at the bottom left corner but I am not able to access anything whatsoever and I never get my desktop screen or the desktop icons. I restarted and closed several times, and as soon as I log on windows, I just get the same blue screen.

  The 2nd time I did the recovery process, I let him continue overnight (just in case I was not waiting long enough) and my computer never stop as it was supposed to when the installation is complete.  In addition, the whole process, I looked the first time around and my computer never restarted as he said he was supposed to; It seems to just be stuck for the rest of the installation procedure for windows.  There finally comes to switch to "standby" mode.

  I have nothing plugged on the other except the power cord, monitor, and keyboard/mouse.  I have not installed new hardware since I bought the computer.

  I did a test of diagnosis and everything going on.

  I tried to get help from HP Support, but because I am out of the warranty period, they cannot help me and want to charge me $99!

  I don't know what else to do at this point. Can someone please?

  Thank you.

  Hello

  Assuming that maybe that's a problem with the recovery discs, it is a simple work-around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your PC comes with Windows 7 Home Premium 64-bit, it comes to the exact retail version that you would need.

  If you do not access to the retail drives, you can create an installation disk yourself - just download good picture disc from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD.  These Images are clean and a well respected source, however there are only limited versions available.

  http://www.mydigitallife.info/Download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-link...

  Use the disk to perform the installation, enter the activation key of Windows on the sticker COST on your PC on demand, and when the installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load normally delivered with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need can be found here.

  Kind regards

  DP - K

• Cannot increase the resolution of the screen after Windows 7 updates

  Hey guys,.

  I recently did a Windows Update on my Win7 laptop and the resolution has been reduced from 1280 to 1026. So now, I have a screen size of 1024 and a black band on the right side of my screen. Essentially, I can't adjust or wear a size of 1280. Everyone knows that lately after the updates. This happened to me around the last week of April. I tried to do a system restore on it which works very well and it brings back to the full screen resolution, but once I restart the laptop he then it narrows down to 1024 on restart. It's as if the part of the screen becomes invalid.

  Hi Jesse,.

  I hear your frustration. It is a driver problem. So, lets get set for that (I hope, your BIOS is OK). What is happening is that your system resets with the incorrect driver. What you need to do is to 'disable' (not uninstall) the driver of 'bad' and use only the correct driver. That you should be able to do it via the Device Manager.

  Try this approach and see how you rate. Once you can get the 'good' driver to work properly, then and only then we will get rid of the 'bad' driver (uninstall).

  Kind regards

  BearPup

• Cannot adjust the brightness of the screen after Windows 8.1 update

  Hello

  After you have installed Windows 8.1, I can't adjust the brightness of the screen more.  I checked and updated all the drivers and nothing helped.  There used to be a brightness slider in the control panel in the power settings.  It's over now.  I've looked everywhere for a solution, but I can't seem to find it.  Any help would be greatly appreciated.

  Here are the specs of my computer:

  HP Pavilion 23-F213W Smart Touch

  Windows 8.1

  Thank you

  Many All in One computers are able to use HP MyDisplay in this http://www.portrait.com/dtune/hpc/enu/index.htmlplace.  There is a list of maps videos supported on this page and should help to restore the video controls setting.