AnyConnect license

Similar Questions

• AnyConnect licenses for Cisco RV110W

  Hi all

  Thank you in advance for taking the time to respond - I tried for the last hour and seek more information on the AnyConnect client for an entry level firewall - CiscoRV110W, but I'm still confused.

  To say simple things, my questions are:

  If I buy this firewall of entry-level VPN connections supports 5 + 5, can users download the AnyConnect client and connect to the VPN for free (once it is set up), or do I have to pay extra for the AnyConnect licenses? How much would that cost?

  My experience with AnyConnect has been so far limited to the end user, use it to connect to the network through the VPN at work, but now I take into account set up something similar for a small office with a few teleworkers.

  Connection of the device:

  http://www.Cisco.com/c/en/us/products/collateral/routers/RV110W-wireless...

  I already read the FAQ for AnyConnect, but it is still is not clear.

  Thank you for your time!

  Hi mmihai.toma,

  As far as I know, is not supported on devices RV Anyconnect.  If you want to use Anyconnect you must have a Firewall ASA or IOS, router IO - XE.

  According to the documentation it looks like the only VPN options for the device of RV are: quick VPN, Site to Site, and PPTP.

  It may be useful

  -Randy-

• ASA 5510 Anyconnect licenses with Cisco Anyconnect VPN IP phone

  Hi, hoping someone can shed some light on what I'm just more confused over trying to get by. Not sure if this goes in the section IP Telehpony or here...

  We have an ASA 5510 with the base license. We need to install IP phones to home teleworkers, and I understand there are Cisco IP phones that have built-in VPN clients to enable a tunnel to the central private network. IT seems that you can't use Anyconnect VPN to do this, and I am trying to establish what upgrade licenses, we must apply to the ASA, as both Anyconnect licenses that you get for free on the SAA is not enough.

  This is the phone that we seek;

  http://www.Cisco.com/en/us/prod/collateral/voicesw/ps6788/phones/ps10499/ps11005/data_sheet_c78-603725.html

  I want to know is the Anyconnect Essentials license will work with these IP phones?

  When I do a version of the show,

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  SSL VPN peers: 2

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  It shows "AnyConnect for Linksys phone: Disabled", it is the same for the Cisco IP phones? It is the kind of specific license, should I seek for Anyconnect on IP phones or will Essentials?

  Hi Leo,

  you will need 2 licenses: an Anyconnect Premium license and a permit «Anyconnect of Cisco VPN phone»

  ASA 8.2 and earlier license "for Cisco VPN Phone" has been named "for phone Linksys' it's the same.

  CFR. http://www.Cisco.com/en/us/docs/security/ASA/asa84/license/license_management/license.html#wp1487574

  HTH

  Herbert

• Cisco Anyconnect license upgrade Questions

  Hi all

  So, we currently have a pair of failover ASA 5515 - X running at one of our sites. This serves as a VPN gateway for our users. I am migrating users from the old Cisco VPN client to the newest Cisco Anyconnect client. I have work and installing anyconnect. Meanwhile, I discovered that process to take care of TLS 1.1 and using the Anyconnect client, you must use the most recent 4.0 Anyconnect client. To use this client, you must have something license called a "Anyconnect more" I think it was a recent change of return in 2014. We currently have the Anyconnect Essentials license installed on the ASA pair. I discovered that not only it a license upgrade available for upgrade Anyconnect positive of the battery, but the Anyconnect Plus license is subscription now. Boo Cisco. But that's another debate.

  I went ahead and reluctantly bought the upgrade license to upgrade Anyconnect positive of the battery. I am trying to understand however the affects of the installation of this license with respect to the current VPN functionality. Currently, we offer the following VPN options for our users:

  RA IPSEC (IKE v1via former customer)

  RA IPSEC (L2TP via the Windows client)

  SSL (Anyconnect 3.0)

  We also use tunneling IPSEC of P2P (IKEv1 PSK) between two sites to serve as a link of relief when our primary site-to-site link fails.

  If anyone knows what would be the effect on the current VPN functionality when installing my upgrade license? He turns off the older IPSEC IKEv1 feature? As I said I want to migrate to the newer platform users but still have need of the oldest customer work until this can be done. I have this in my current setup:

  WebVPN

  AnyConnect essentials

  What happens on this command when I apply the new license?

  Appreciate any help here. Thank you.

  Addition of the new activation key and the client configuration somehow 4.x will not affect the IKEv1, L2TP or VPN SSL. "AnyConnect essentials" rest a command active and valid

  It will give the ability to activate the advanced security features that require the 4.x client.

• ASA 5545 and Anyconnect Licenses

  Currently, we use several devices to Cisco ASA 5545.  Initially, we learned that we were automatically allowed using the Anyconnect Secure Mobility client with our ASA devices.   With recent security issues, we are trying to move to a solution that supports TLS 1.2, and it seems that anyconnect Mobility Client 4.0 will do exactly that.   My question is, the automatic authorization supplied with the unit of 5545 ASA include Client Anyconnect 4.0?   After an exhaustive search, I am still unable to find this information.   Also, is there an official document detailing exactly what licenses is part of 5545 device, with respect to other Cisco Software Solutions?

  Thank you

  David

  All * ASAs include two licenses AnyConnect Premium "free." Which is designed primarily for the evaluation, as most businesses need more two simultaneous remote access users. However, if that's all you need is free and fully functional. It was designed around the Client AnyConnect Secure Mobility 3.x and earlier offer.

  From 4.0, there is a new model of licence for AnyConnect. It is explained in the Guide of command AnyConnect. While it is not currently applied by technical means, use of AnyConnect 4.0 requires having a license to do so.

  For some additional supporting documents as you initially requested, see also "Feature Licenses" of the Configuration Guide of the SAA.

  * Some models do not support remote access VPN and either do not have the feature available or cannot use the license - for example ASA 1000v and an ASA working in multiple context mode.

• ASA 5520 - SSL VPN (Anyconnect) licenses

  Hello

  Can someone clarify for me the SSL VPN/AnyConnect for the ASA 5520 license?  Specifically, the differences between the AnyConnect Essentials and AnyConnect Premium.  Our current license looks like this:

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 150
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  Total of the VPN peers: 750
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5520 VPN Plus license.

  I guess that means that we have just the 2 'free trial' SSL VPN licenses and nothing else.

  I would like to add 25 or maybe 50 SSL VPN licenses and be able to use a combination of full free client, thin client and groups client AnyConnect.  The 'ASA5500-SSL-25' (or 50) would be the correct license I need to buy?

  Thank you

  Rob

  Hello

  The essentials license is per device and does not allow full-tunnel.

  If you need other features like Secure Desktop, without client SSL and other optional features such as shared licenses, you must go to the Premium license.

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/data_sheet_c78-527494_ps10884_Products_Data_Sheet.html

  Federico.

• Cisco Anyconnect license users

  Hi all

  Here's my license information:

  Cisco Adaptive Security Appliance Software Version 5,0000 26
  Version 6.4 Device Manager (7)

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 150
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  Total of the VPN peers: 750
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5520 VPN Plus license

  I want to just increase the number of users Anyconnect. Just buy the (ASA5500-SSL-10) license or Anyconnect Essentials.

  In other words, the current license does not support more than 2 users if I buy ASA5500-SSL-10?

  How can I purchase a license and how do I install it in the asa?

  Thank you & your help is very appreciated.

  Omer

  OK, you can buy the option 1 or 2, but option 2, you just need the AnyConnect Premium license as ASA5500-SSL-10 is the AnyConnect Premium license.

  Here is more information about the license AnyConnect:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/data_sheet_c78-527494_ps10884_Products_Data_Sheet.html

  http://www.Cisco.com/en/us/partner/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80402e39.html

  ASA5520, it supports 750 concurrent users with license key AnyConnect.

  Essential AnyConnect is cheaper than the AnyConnect Premium license, however, I don't know how much it costs.

• Cisco AnyConnect licenses

  Hello

  I know Cisco AnyConnect is free for iOS, Android, BlackBerry devices...

  But what about Windows & Linux?

  Thank you

  AnyConnect is not free for the devices, with the exception of two sessions, allowed by default without any license key.

  Here is the form:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/data_sheet_c78-527494.html

• Licensing of ASA - AnyConnect

  Hello

  I am looking to Anyconnect ASA5515-X licenses with the power of fire (ASA5515-FPWR-k9) but am a bit confused to for AnyConnect license options...

  Can someone explain to me how it works?

  I got a quote for an ASA5515-X-K9 previously with 50 premium SSL VPN licenses, but now I'm looking at the ASA5515-FPWR-k9, I can't work on the right option. Later that I got for 50 licenses AnyConnect more seems to be 10 times cheaper? Surely, it can't be the same thing?

  Most of old roughly equate with the new more licenses (with no separate required Mobile license) and is generally sold as a term-based perpetual license vs.

  The premium of the old maps to the Apex (no separate assessment Endpoint advanced required). It is sold only focused on the term (1, 3 or 5 years).

  There is a guide AnyConnect directing partners and resellers to use.

• AnyConnect 4.0 license with ASA-5515-FPWR

  Hi all

  I have a small question, where I can't find a clear answer for:

  A customer wants to buy a new ASA for a showroom. He wants to connect 30 phones VPN and 60 VPN users, where only 10 of them are simultaneously connected. Then we would have two choices now

  -Either go with the 3.5 Anyconnect licensing, with a premium SSL 50 license and activation phones VPN and mobility AC licenses

  - Or go to AC 4.0 license, where we would have to license 100 users with MORE licenses.

  My questions are:

  -Can I any other / more license on the SAA (i.e. SSL)

  -Where to install the license

  -How is the number of users (i.e. of the ad groups, local accounts)

  Is there a documentation clearly indicating the answers

  Thank you all for your help.

  If you want that the phone itself to be the endpoint remote VPN access, then Yes - you need VPN phone license which requires in turn AnyConnect Premium (for 3.x installations)

  "Plus" AnyConnect (for 4.x) includes 'VPN functionality for PC and mobile platforms, including per-app VPN on mobile platforms and phone Cisco VPN' (referring to the January 2015 of the ordering Guide AnyConnect 4.0 version)

• Issue of license Apex AnyConnect

  Hello

  I have the AnyConnect 25 peers premium license,

  AnyConnect Premium peer: 25 perpetual
  Counterparts in other VPNS: 750 perpetual
  Total VPN counterparts: 750 perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual

  Then, I bought an Apex 50 AnyConnect-user license. I recorded ASA device with number PAK received the following activation key Cisco ASA 5500 Series Adaptive Security Appliance,.

  Premium AnyConnect peers: 750
  Other VPN peers: by default
  Assessment of Advanced endpoint: enabled
  AnyConnect for Mobile: enabled
  AnyConnect VPN phone Cisco: enabled

  It seems to be that I have not 50 but 750 available AnyConnect peers. Why?

  Thank you

  AnyConnect licenses are not additive.

  If you have installed the activation key / license for 50 Apex then you are licensed for 50 users Apex.

  Which replaces the old license that is no longer installed - you can return to it only if you have the old activation key.

• ASA AnyConnect more vs Apex in version show license

  Hello

  I couldn't find good details on what I should see in 'show version' outings with license AnyConnect more or Apex.

  Can you please direct me to the proper documentation or examples of the 2 'show version' output with more an Apex licenses?

  Thanks in advance!

  Peter

  Hi Pete,.

  Unfortunately the ASA will show not explicit if the user uses a Plus or the license of APEX. In the vpn-sessiondb show detailed Anyconnect. The connection will say that it uses premium Anyconnect license.

  -Randy-

• License AnyConnect disables AnyConnect essentials

  Is this correct?  It does not seem right.  I bought a mobile Anyconnect license to add to my ASA 5505, who already had active Anyconnect Essentials.

  I received the watch activation key that I would go to:

   License : Base Max Physical Interfaces : 8 VLANs : 3, DMZ Restricted Dual ISPs : Disabled Trunk Ports : 0 Failover : Disabled Inside Hosts : 50 VPN DES Encryption : Enabled VPN 3DES and AES Encryption : Enabled VPN Peers : 10 SSL VPN Peers : 2 Shared SSL VPN licensing : Disabled AnyConnect Mobile : Disabled Linksys VPN Phone : Disabled AnyConnect Essentials : Enabled Advanced Endpoint Assessment : Disabled UC Proxy Sessions : 2 UC Phone Proxy Sessions : 2 Botnet Traffic Filter : Disabled 

  TO:

   Inside Hosts : 50 Failover : Disabled Encryption-DES : Enabled Encryption-3DES-AES : Enabled Security Contexts : Default GTP/GPRS : Disabled AnyConnect Premium Peers : Default Other VPN Peers : Default Advanced Endpoint Assessment : Disabled AnyConnect for Mobile : Enabled AnyConnect for Cisco VPN Phone : Disabled Shared AnyConnect Premium License server : Disabled Shared License : Disabled UC Phone Proxy Sessions : Default Total UC Proxy Sessions : Default AnyConnect Essentials : Disabled Botnet Traffic Filter : Disabled Intercompany Media Engine : Disabled Cluster License : Disabled vCPUs : 0 

  The Mobile license should not disable Essentials. That could be a mistake made by the license server.

  I recommend to open a TAC case and urging them to please put in the queue for license Global (GLO) operations. Request GLO re - issue an activation key which includes your already approved essentials.

• Cisco Anyconnect/WebVPN license for ASA 5510

  Hello

  Someone could please check the licenses for ASA 5510 attachment and let me know. We currently have ASA 5510 with basic license. According to the table attached under VPN sessions, he mentions that "250 combined SESSIONS IPSec and WebVPN" and to "Max box of WebVPN Session" it is mentioned that 2nd meeting, exceeding that we must buy license optional webvpn. While we the 250 combined license for IPSec and webVPN. We must purchase additional anyconnect license to set up remote access for users who want to use the internal resources from outside the network. OrElse, we don't have to purchase license and can configure webvpn/anyconnect of existing combined license existing users basic ASA license? Waiting for your response. Thank you.

  You are welcome.

  1 Yes

  2 AnyConnect requires no Java, but it can he use when connecting to one AnyConnect SSL VPN client and launch the Web browser option start Java-based. There was a bug with the AnyConnect old versions had later who should have addresses. You also have the option to launch via IE and using ActiveX or simply throw AnyConnect directly - neither of these two methods require Java.

  Here is a document TAC on the Java questions if you want more details.

  Please take a moment to note the useful messages and mark your answers questions.

• AnyConnect Mobile license

  Hello

  I have 2 questions about the mobile Anyconnect license?

  1. Why is there a mobile separate license for mobile devices for SSL VPN on an ASA firewall in addition to the regular essentials license, but when using the SSL VPN on the latest IOS routers, that a license is required? (I can connect to the IOS router with our mobile devices without error message)

  2 is supported for setting up Cisco IOS ssl vpn on demand router? (Trying to implement access remote jabber)

  1. it is a business of Cisco and just something we implementers should work with. For what it's worth, AnyConnect 4.0 is licensed differently and do not require a separate mobile license.

  2. I don't know about that one.