Licensing of ASA - AnyConnect

Similar Questions

• Cisco Anyconnect/WebVPN license for ASA 5510

  Hello

  Someone could please check the licenses for ASA 5510 attachment and let me know. We currently have ASA 5510 with basic license. According to the table attached under VPN sessions, he mentions that "250 combined SESSIONS IPSec and WebVPN" and to "Max box of WebVPN Session" it is mentioned that 2nd meeting, exceeding that we must buy license optional webvpn. While we the 250 combined license for IPSec and webVPN. We must purchase additional anyconnect license to set up remote access for users who want to use the internal resources from outside the network. OrElse, we don't have to purchase license and can configure webvpn/anyconnect of existing combined license existing users basic ASA license? Waiting for your response. Thank you.

  You are welcome.

  1 Yes

  2 AnyConnect requires no Java, but it can he use when connecting to one AnyConnect SSL VPN client and launch the Web browser option start Java-based. There was a bug with the AnyConnect old versions had later who should have addresses. You also have the option to launch via IE and using ActiveX or simply throw AnyConnect directly - neither of these two methods require Java.

  Here is a document TAC on the Java questions if you want more details.

  Please take a moment to note the useful messages and mark your answers questions.

• ASA 5510 Anyconnect licenses with Cisco Anyconnect VPN IP phone

  Hi, hoping someone can shed some light on what I'm just more confused over trying to get by. Not sure if this goes in the section IP Telehpony or here...

  We have an ASA 5510 with the base license. We need to install IP phones to home teleworkers, and I understand there are Cisco IP phones that have built-in VPN clients to enable a tunnel to the central private network. IT seems that you can't use Anyconnect VPN to do this, and I am trying to establish what upgrade licenses, we must apply to the ASA, as both Anyconnect licenses that you get for free on the SAA is not enough.

  This is the phone that we seek;

  http://www.Cisco.com/en/us/prod/collateral/voicesw/ps6788/phones/ps10499/ps11005/data_sheet_c78-603725.html

  I want to know is the Anyconnect Essentials license will work with these IP phones?

  When I do a version of the show,

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  SSL VPN peers: 2

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  It shows "AnyConnect for Linksys phone: Disabled", it is the same for the Cisco IP phones? It is the kind of specific license, should I seek for Anyconnect on IP phones or will Essentials?

  Hi Leo,

  you will need 2 licenses: an Anyconnect Premium license and a permit «Anyconnect of Cisco VPN phone»

  ASA 8.2 and earlier license "for Cisco VPN Phone" has been named "for phone Linksys' it's the same.

  CFR. http://www.Cisco.com/en/us/docs/security/ASA/asa84/license/license_management/license.html#wp1487574

  HTH

  Herbert

• Licenses of ASA

  Hi all

  We bought a new device of 5515 x ASA. I'm confused with the license available on the device.

  How many users can connect with the Anyconnect VPN client to the device?

  The maximum physical Interfaces: unlimited perpetual
  VLAN maximum: 100 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active/active perpetual
  Encryption - A: enabled perpetual
  AES-3DES-Encryption: activated perpetual
  Security contexts: 2 perpetual
  GTP/GPRS: Disabled perpetual
  AnyConnect Premium peers: 2 perpetual
  AnyConnect Essentials: Disabled perpetual
  Counterparts in other VPNS: 250 perpetual
  Total VPN counterparts: 250 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy total UC sessions: 2 perpetual
  Botnet traffic filter: disabled perpetual
  The IPS Module: Disabled perpetual
  Cluster: Activated perpetual
  Members of the cluster: 2 perpetual

  This platform includes an ASA 5515 Security Plus license.

  FC

  Philip AnyConnect 4.x licenses are NOT limited to a single ASA (or pair HA). It is a change of 3.x and earlier versions.

  You can exchange the PAKs against ASAs as are used for remote access VPN in a given customer.

  As long as you do not exceed the number of authorized users, you in the terms of the license. The number of users is not currently technically - applied is to the customer, such as advised by their dealer, buy the right level of license.

• ASA AnyConnect client is unable to obtain the IP address of the remote DHCP server

  I and ASA with 10 client AnyConnect profiles set up to get their IP address of my Windows DHCP server.

  It was working fine yesterday.

  I saved the config and rebooted the device.

  Now it won't deliver to my vpn clients intellectual property.

  I don't understand what is happening.

  If I change the profiles to use a local pool he assigns an IP address and works very well.

  But I can't use the local pools.  I have to use the DHCP server on the local network.

  The ONLY thing that was made was that a license allowing the AnyConnect Essentials has been installed recently.

  I get this in debugging:

  6 August 30, 2011 10:44:39 DAP: test49, Addr 107.44.142.20 user, connection AnyConnect: following DAP records were selected for this connection: DfltAccessPolicy

  6 August 30, 2011 10:44:39 group user IP <107.44.142.20>AnyConnect parent session began.

  7 August 30, 2011 10:44:39 IPAA: received message 'UTL_IP_ [IKE_] ADDR_REQ.

  6 August 30, 2011 10:44:39 IPAA: attempt to query DHCP 1 successful

  6 August 30, 2011 10:44:39 IPAA: DHCP configured, the request succeeded for tunnel-group "MCSO-mobile."

  6 August 30, 2011 10:44:39 172.18.4.7 67 172.18.1.46 67 Built UDP outgoing connection 30957 for Internal:172.18.1.46/67 (172.18.1.46/67) at identity:172.18.4.7/67 (172.18.4.7/67)

  7 August 30, 2011 10:44:39 192.168.6.1 built ISP1:192.168.6.1 local-home

  6 August 30, 2011 10:44:39 172.18.1.46 1 192.168.6.1 0 built outgoing ICMP connection for faddr gaddr laddr 172.18.1.46/1 172.18.1.46/1 192.168.6.1/0

  6 August 30, 2011 10:44:41 172.18.1.46 67 192.168.6.0 67 Built UDP outgoing connection 30960 for ISP1:192.168.6.0/67 (192.168.6.0/67) at Internal:172.18.1.46/67 (172.18.1.46/67)

  6 August 30, 2011 10:44:42 192.168.6.1 0 172.18.1.46 1 connection disassembly ICMP for faddr gaddr laddr 172.18.1.46/1 172.18.1.46/1 192.168.6.1/0

  7 August 30, 2011 10:44:52 IPAA: message received 'UTL_IP_DHCP_INVALID_ADDR '.

  4 August 30, 2011 10:44:52 IPAA: could not get the address of the local strategy group or tunnel-group pools

  Well, your config looks good. You also upgrade the operating system? Maybe you hit a new bug.

  I heard no problems after the installation of a license, but it might be interesting to open a TAC case and learn if you hit a bug.

• NAC and ASA AnyConnect Essentials

  If you have the Essentials AnyConnect VPN license - the ASA is able to do all of the NAC such as searching the registry value or check his firewall definitions are up-to-date?  Thank you.

  With an AnyConnect Essentials license is activated, without client feature WebVPN, Cisco Secure Desktop (CSD) and assessment of Advanced endpoint is disabled.  For this reason, you won't be able to make the registry checks, check the antivirus updates, etc..

• AnyConnect 4.0 license with ASA-5515-FPWR

  Hi all

  I have a small question, where I can't find a clear answer for:

  A customer wants to buy a new ASA for a showroom. He wants to connect 30 phones VPN and 60 VPN users, where only 10 of them are simultaneously connected. Then we would have two choices now

  -Either go with the 3.5 Anyconnect licensing, with a premium SSL 50 license and activation phones VPN and mobility AC licenses

  - Or go to AC 4.0 license, where we would have to license 100 users with MORE licenses.

  My questions are:

  -Can I any other / more license on the SAA (i.e. SSL)

  -Where to install the license

  -How is the number of users (i.e. of the ad groups, local accounts)

  Is there a documentation clearly indicating the answers

  Thank you all for your help.

  If you want that the phone itself to be the endpoint remote VPN access, then Yes - you need VPN phone license which requires in turn AnyConnect Premium (for 3.x installations)

  "Plus" AnyConnect (for 4.x) includes 'VPN functionality for PC and mobile platforms, including per-app VPN on mobile platforms and phone Cisco VPN' (referring to the January 2015 of the ordering Guide AnyConnect 4.0 version)

• ASA AnyConnect more vs Apex in version show license

  Hello

  I couldn't find good details on what I should see in 'show version' outings with license AnyConnect more or Apex.

  Can you please direct me to the proper documentation or examples of the 2 'show version' output with more an Apex licenses?

  Thanks in advance!

  Peter

  Hi Pete,.

  Unfortunately the ASA will show not explicit if the user uses a Plus or the license of APEX. In the vpn-sessiondb show detailed Anyconnect. The connection will say that it uses premium Anyconnect license.

  -Randy-

• AnyConnect VPN license on ASA 5510

  Hello

  We have ASA 5510 IPS with basic license. We must now Anyconnect support for more than 2 users.

  Anyconnect (tunnel mode) but essentially Anyconnect license enough? Do need me a license for SSL VPN peers?

  What about Anyconnect without customer, I see that I need a premium license?

  This one is pretty ASA5510-SSL50-K9? It's really expensive compared the Anyconnect Essentials.

  Here is my worm out sh:

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 50
  Internal hosts: unlimited
  Failover: disabled
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 0
  GTP/GPRS: disabled
  SSL VPN peers: 2
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes a basic license.

  Yes, AnyConnect Premium includes all the SSL features (including the complete tunnel mode AnyConnect - which is what sustains essential AnyConnect).

  So if you buy the 50 user for AnyConnect Premium license, you can have up to 50 SSL VPN connections, if they are the combination of all without customer, or combination of tunnel without customer and full, or just full tunnel. All with a maximum of 50 simultaneous SSL tunnels.

• ASA anyconnect Webvpn does not work after upgrade to 9.42

  Hello

  I updated ASA5512x to version 9.4 (2) 6. Since the upgrade only anyconnect vpn connection works, if another connection starts, he launched the first out and struggled to start the connection. The ASA has 10 premium licenses and worked at 8.6

  Any advice would be appreciated. Thank you very much.

  Try going to asa942-11-smp - k8.bin.

• LICENSE OF ASA

  I need to KNOW for the firewall of the firepower of ASA for the Site to site VPN sessions or client sessions vpn site need no license.

  The ASA 5516 X (with or without fire power module) is fully approved for IPsec site-to-site VPN until the capacity of the equipment (300 for this platform).

  "customer site" or to speak (if SSL or IPsec IKEv2) VPN remote access, require licenses AnyConnect. There are 2 Premium / Apex licenses included with all the ASAs which are there mainly to test the feature.

  If you want to set up for multiple users, you can buy AnyConnect. Currently, it is available in two versions - more and Apex. More is a base of remote access VPN and the client must be installed on the end user's computer. Apex is the top version with many more advanced features and may possibly be used to configure clientless SSL VPN by which the end user only needs a browser.

  Visit the AnyConnect product information pages for many more details.

• All necessary licenses on ASA 5510 for old Cisco VPN Client

  We're trying to migrate our firewall Watchguard to a Cisco ASA 5510, who bought some time ago. For some reason, all of our users have already installed the old Cisco VPN client. I think it will work. Are there licensing issues on the 5510 I had to be concerned with?  No matter what special config that needs to be done on the 5510?

  Fix. You don't require licensing of AnyConnect of any type of configuration and the use of IKEv1 IPsec remote access VPN (which use the old Cisco VPN client).

  You will be limited to 250 active IPsec peers (remote access more no matter what VPN site-to-site) by the platform (hardware) device capabilities that are enforced by the software.

• License to ASA5520 AnyConnect

  Dear team,

  Here is the configuration of one of our clients and they asked for 50 users Anyconnect license with the software installed on the client.

  **************************************************************************************************************************

  ABC # sh ver

  Cisco Adaptive Security Appliance Version 8.2 software (2)
  Version 5.2 Device Manager (3)

  Updated Tuesday, January 11, 10 14:19 by manufacturers
  System image file is "disk0: / asa822 - k8.bin.
  The configuration file to the startup was "startup-config '.

  PSO - ASA up to 110 days 22 hours
  failover cluster upwards of 110 days 22 hours

  Material: ASA5520, 512 MB RAM, Pentium 4 Celeron 2000 MHz processor
  Internal ATA Compact Flash, 256 MB
  BIOS Flash M50FW080 @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CN1000-MC-BOOT - 2.00
  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04
  0: Ext: GigabitEthernet0/0: the address is 001e.f760.a75c, irq 9
  1: Ext: GigabitEthernet0/1: the address is 001e.f760.a75d, irq 9
  2: Ext: GigabitEthernet0/2: the address is 001e.f760.a75e, irq 9
  3: Ext: GigabitEthernet0/3: the address is 001e.f760.a75f, irq 9
  4: Ext: Management0/0: the address is 001e.f760.a760, irq 11
  5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
  6: Int: not used: irq 5
  7: Ext: GigabitEthernet1/0: the address is 001e.f760.b729, irq 255
  8: Ext: GigabitEthernet1/1: the address is 001e.f760.b72a, irq 255
  9: Ext: GigabitEthernet1/2: the address is 001e.f760.b72b, irq 255
  10: Ext: GigabitEthernet1/3: the address is 001e.f760.b72c, irq 255
  11: Int: internal-Data1/0: the address is 0000.0003.0002, irq 255

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 150
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  Total of the VPN peers: 750
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5520 VPN Plus license.

  Serial number: JMX1210L21K
  Activation key running: 0x7c1f6a6e 0x44e5b71d 0xa8b04110 0x9e043c5c 0x0d329294
  Registry configuration is 0x1
  Last modified by enable_15 at 10:58:52.275 UTC Wednesday, December 18, 2013 configuration

  ****************************************************************************************************************************************

  I quoted the "L-ASA-SSL-50 =" but confused about licensing ASA.

  Please let me know if it's the right one or should I cite something else?

  Kindly let me know if we need to buy the client software for client based SSL VPN?

  Kind regards

  Farhan.

  If the fares user requests the license 50 so I think because it is a pretty clear indication that they are interested in the premium license on this 5520 Essentials license would give them the total number of VPN connections that the platform supports (750 for the 5520).

  Farhan may want to talk with the user know if the Essentials license would give them what they want. If YES Essentials license is much cheaper than the Premium license. What you get with the premium license you do not get with the Essentials license is clientless VPN support and support for things like the assessment distance. But for regular client access VPN Essentials license is often enough.

  Also note that these licenses grant users access when using the regular PC platforms. If you want users to access using mobile devices like smart phones, then you also need the AnyConnecct for the Mobile license.

  HTH

  Rick

• Protect and control the license for ASA with the power of fire

  I had 1 ASA 5515 initially delivered with the software cx, then made room for the software of firepower and got the virtual firesight for 2 devices and license of TAMAS tha L-5515, but this license was told only the URLs and malware license, I thought that this license was for all that since he has no other licenses in the data sheet and it's Reference with more features.

  How can I get the license protect and control now so I can add the asa with the firepower to firesight and apply to all licenses

  Thank you

  Hello

  L ASA5515-TAMAS = SKU license plans to "MALWARE" and "URLFilter" and legally gives the user to updates of the signature "PROTECT + CONTROL". It does not license "PROTECT + CONTROL". You need to buy "ASA5515-CTRL-LIC =" to license "PROTECT + CONTROL".

  Please discuss a case with CISCO GLO, they can help provide a CTRL license

  -DD

• License FireSIGHT - ASA IPS

  Hello

  I currently installs a virtual appliance of FireSIGHT to manage installed with fire services ASA 2.

  My Defense Center is an appropriate license, using the key PAK I got.

  I bought 2 IPS for two of the ASA subscription licenses.

  I have configured the Manager on both devices of sourcefire and added to the centre of defence.

  Now, my problem is: I can't attribute any IPS policy because there seems to be no licenses installed on the domain controller to be applied to devices...

  My question is: what I have to buy additional licenses for the domain controller for the IPS features (Protection) or do I missed something here? :-)

  Thank you very much

  Kind regards

  Hello

  As Marvin commented, you will have a license CTRL "ASA5525-CTRL-ICA" accompanying the device through a certificate of claim. On the certificate, you should see a number PAK and steps to save to get the license. Please follow these.

  If you have purchased a = L - ASA5525 - TA - LIC, then that gives you the right to obtain updates to signature for CONTROL-PROTECT features. There is no PAK or license for this PID.

  -DD