AnyConnect VPN log in failure

Today, we had a very disturbing failure. We have a private network fully functional virtual on our device of Adaptive Security ASA 5510 8.2 (5) running. I was installing a new user on a computer of Windows 7 Professional 64 bit using FireFox instead of Internet Explorer.

The initial connection has worked well, but the client download has failed. I clicked on the link to download the client manually and the Cisco VPN client appeared to download and install correctly. However, when I tried to open the VPN after installed customer he says again once the automatic download of the client failed and he offered the link to download the client once again, that I made with exactly the same result.

I thought that perhaps the problem was with FireFox so I opened Internet Explorer and enter the url for the VPN. After that the user name and password entered (and validated), I got the same error on the failure of client download and I selected the link for download it manually like I did the other 3 times in FireFox. This time, it seemed indeed that it worked as I received the certificate on AnyConnect error (which I normally receive it) However, the login screen remained on the page after I clicked on the certificate error to continue.

The PC seems to hang so I finished the VPN session and then attempted to re-establish the connection. This time when I entered the username and password, it came up saying "opening session not valid." I tried again and got the same result. I tried another user but no joy... same result... is not a valid connection. I went to another PC; that worked fine a few minutes earlier and I got the same invalid login message any user name and password I entered. Something happened that was blocking all users to connect to the VPN.

I didn't believe that attempts to connect to the VPN using FireFox on a Windows 7 64 bit machine could sort my Cisco VPN fall but I was out of options... so I restarted the ASA and much to my reboot disappoinment has completely restored the VPN service.

Now, if it was a router LinkSys of 75 million dollars instead of a safety device several thousand dollars I just shake, but how can it be that a failed connection attempt could put a Cisco ASA 5510 VPN kneeling? I thought maybe I had grown the max license for SSL VPN connections... I think its 2... But if it was the case then why don't the message indicates that instead of just saying 'invalid connection '. Also, there is no other opening connectionsat the time unless all downlaod failure attempts counted as active sessions. Also, I had already checked in ASDM and no active VPN sessions have been recorded.

Any guidance someone can provide would be greatly appreciated.

Hi Edward,.

I went through the issue and I think you have only 2 license for SSL and when you try to login several times, nomatter if the installation completed successfully, or it has failed but the sessions have been built on the SAA and after the construction of the session, ASA pushed these files on client computers. I know that it gives you a message beside the point, saying: 'Invalid logon', but if you run the debug web svc 255 on the SAA (using SSH/Telnet), you will see a message:

Session could not be established. Session limit 2 reached

You say that you don't see any session on the SAA, so could you please get the output of the command:

debugging web anyconnect 255 (or debug web svc 255) and share with us.

Thank you

Vishnu Sharma

Tags: Cisco Security

Similar Questions

Anyconnect VPN logs

Hello people!

I would like to know how I can see the story of anyconnect VPN.

See current webvpn or ssl vpn client session, I now this command can be using, but I Don t know about history.
ASA # display webvpn vpn-sessiondb
or ASA # display vpn-sessiondb svc

Thank you

Marcio

Hi Marcio,

To do this you must configure a syslog server.

Please visit this link:

http://www.Cisco.com/c/en/us/support/docs/security/PIX-500-series-Securi...

You would be able to extract the information from the Anyconnect users who have a link in the past.

It will be useful.

Kind regards

Aditya

Please evaluate the useful messages.

ASA5505 SSL AnyConnect VPN and NAT Reverse Path failure

I worked on it for a while and just have not found a solution yet.

I have a Cisco ASA5505 Setup at home and I try to use the AnyConnect VPN client to it. I followed the example of ASA 8.x split Tunnel but still miss me something.

My home network is 10.170.x.x and I install the VPN address to 10.170.13.x pool I have a Windows workstation running at 10.170.0.6, printers 10.170.0.20 and 21 and inside the router itself is 10.170.0.1

I can connect from the outside and am assigned an IP address of 10.170.13.10, but when I try to access network resources via ICMP or open a web page, the newspaper of the ASDM shows a bunch of this:

5. January 27, 2010 | 10: 33:37 | 305013 | 10.170.255.255 | 137. Asymmetrical NAT rules matched for flows forward and backward; Connection for udp src outside:10.170.13.10/137 dst inside:10.170.255.255/137 refused due to path failure reverse that of NAT
5. January 27, 2010 | 10: 33:36 | 305013 | 10.170.255.255 | 137. Asymmetrical NAT rules matched for flows forward and backward; Connection for udp src outside:10.170.13.10/137 dst inside:10.170.255.255/137 refused due to path failure reverse that of NAT
5. January 27, 2010 | 10: 33: 35 | 305013 | 10.170.255.255 | 137. Asymmetrical NAT rules matched for flows forward and backward; Connection for udp src outside:10.170.13.10/137 dst inside:10.170.255.255/137 refused due to path failure reverse that of NAT
5. January 27, 2010 | 10: 33:34 | 305013 | 10.170.0.6 | Asymmetrical NAT rules matched for flows forward and backward; Connection for icmp src, dst outside: 10.170.13.10 inside: 10.170.0.6 (type 8, code 0) rejected due to the failure of reverse path of NAT
5. January 27, 2010 | 10:33:30 | 305013 | 10.170.255.255 | 137. Asymmetrical NAT rules matched for flows forward and backward; Connection for udp src outside:10.170.13.10/137 dst inside:10.170.255.255/137 refused due to path failure reverse that of NAT
5. January 27, 2010 | 10: 33:29 | 305013 | 10.170.255.255 | 137. Asymmetrical NAT rules matched for flows forward and backward; Connection for udp src outside:10.170.13.10/137 dst inside:10.170.255.255/137 refused due to path failure reverse that of NAT
5. January 27, 2010 | 10: 33:28 | 305013 | 10.170.255.255 | 137. Asymmetrical NAT rules matched for flows forward and backward; Connection for udp src outside:10.170.13.10/137 dst inside:10.170.255.255/137 refused due to path failure reverse that of NAT
5. January 27, 2010 | 10: 33:28 | 305013 | 10.170.0.6 | Asymmetrical NAT rules matched for flows forward and backward; Connection for icmp src, dst outside: 10.170.13.10 inside: 10.170.0.6 (type 8, code 0) rejected due to the failure of reverse path of NAT
5. January 27, 2010 | 10:33:23 | 305013 | 10.170.0.6 | Asymmetrical NAT rules matched for flows forward and backward; Connection for icmp src, dst outside: 10.170.13.10 inside: 10.170.0.6 (type 8, code 0) rejected due to the failure of reverse path of NAT
5. January 27, 2010 | 10:33:17 | 305013 | 10.170.0.6 | Asymmetrical NAT rules matched for flows forward and backward; Connection for icmp src, dst outside: 10.170.13.10 inside: 10.170.0.6 (type 8, code 0) rejected due to the failure of reverse path of NAT
5. January 27, 2010 | 10: 33: 13 | 305013 | 10.170.0.6 | Asymmetrical NAT rules matched for flows forward and backward; Connection for icmp src, dst outside: 10.170.13.10 inside: 10.170.0.6 (type 8, code 0) rejected due to the failure of reverse path of NAT
5. January 27, 2010 | 10:33:07 | 305013 | 10.170.0.6 | Asymmetrical NAT rules matched for flows forward and backward; Connection for icmp src, dst outside: 10.170.13.10 inside: 10.170.0.6 (type 8, code 0) rejected due to the failure of reverse path of NAT

I tried several things with NAT, but were not able to go beyond that. Does anyone mind looking at my config running and help me with this? Thanks a bunch!

-Tim

Couple to check points.

name 10.17.13.0 UFP-VPN-pool looks like it should be the name 10.170.13.0 UFP-VPN-pool

inside_nat0_outbound to access extended list ip allow list zero 255.255.0.0 255.255.255.0 UFP-VPN-pool

Looks like that one

inside_nat0_outbound to list extended ip access list zero UFP-VPN-pool 255.255.255.0 255.255.255.0 allow

AnyConnect VPN and HP Office Jet Pro 8500 A910

I can print from my laptop IBM T400 running Windows 7 64 bit. However, when I log in work AnyConnect VPN, I can't print. He says that the printer is disconnected from the network, even if it is connected. IT support at work said he can't change or adjust the VPN settings. The only way I can print is to disconnect from the VPN. Is this what I can adjust on the software of the printer or the printer itself?

Hello

To be able to print on the local network when you are connected to a network remote VPN might be possible by changing the VPN split tunneling configuration.

However, it is depands on the VPN features and cannot be authorized because of the security requirements of your IT Department.

Anyway, there is no way to configure such a thing by the printer or the printer software... It is directly affected by the configuration of the network and therefore require to modify VPN settings.

Kind regards

Shlomi

AnyConnect VPN client authentication using certificates

Guys, I'm trying to configure my ASA5505 to authenticate the AnyConnect VPN clients using certificates. I have 'Certificates' defined as my method of authentication in my AnyConnect connection profile (see screenshot), but I get 'Certificate Validation failure' whenever I try to connect. The certificate I want to use is a computer issued by my CA certificate company root (Windows Server 2008 running Active Directory Certificate Services). Screenshot of certificate is attached. I added the root certificate on the SAA, and I tried all kinds of combinations by using the corresponding certificate in the AnyConnect Client profile. Each attempt failed, and I'm having no luck finding documentation on how to proceed. Any help would be greatly appreciated!

Hello Shaun,

The problem you're describing, not be able to authenticate through certificate through Microsoft Internet Explorer, is the fact that the certificate is in the computer store. You do not want to confirm with Microsoft, but, I understand that only Microsoft Internet users explore the user store, this certificate is not available to attend the ASA via the Internet browser.

-Craig

ASA Anyconnect VPN do not work or download the VPN client

I have a Cisco ASA 5505 that I try to configure anyconnect VPN and thought, I've changed my setup several times but trying to access my static public IP address of the external IP address to download the image, I am not able to. Also when I do a package tracer I see he has been ignored through the acl when the packets from side to the ASA via port 443, it drops because of the ACL. My DMZ so will he look like something trying to access the ASA via the VPN's going to port 443. Here is my config

XXXX # sh run
: Saved
:
ASA Version 8.4 (3)
!
hostname XXXX
search for domain name
activate pFTzVNrKdD9x5rhT encrypted password
zPBAmb8krxlXh.CH encrypted passwd
names of
!
interface Ethernet0/0
Outside-interface description
switchport access vlan 20
!
interface Ethernet0/1
Uplink DMZ description
switchport access vlan 30
!
interface Ethernet0/2
switchport access vlan 10
!
interface Ethernet0/3
switchport access vlan 10
!
interface Ethernet0/4
Ganymede + ID description
switchport access vlan 10
switchport monitor Ethernet0/0
!
interface Ethernet0/5
switchport access vlan 10
!
interface Ethernet0/6
switchport access vlan 10
!
interface Ethernet0/7
Description Wireless_AP_Loft
switchport access vlan 10
!
interface Vlan10
nameif inside
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Vlan20
nameif outside
security-level 0
IP address x.x.x.249 255.255.255.248
!
Vlan30 interface
no interface before Vlan10
nameif dmz
security-level 50
IP 172.16.30.1 255.255.255.0
!
boot system Disk0: / asa843 - k8.bin
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
DNS domain-lookup dmz
DNS server-group DefaultDNS
Name-Server 8.8.8.8
Server name 8.8.4.4
search for domain name
network obj_any1 object
subnet 0.0.0.0 0.0.0.0
network of the Webserver_DMZ object
Home 172.16.30.8
network of the Mailserver_DMZ object
Home 172.16.30.7
the object DMZ network
172.16.30.0 subnet 255.255.255.0
network of the FTPserver_DMZ object
Home 172.16.30.9
network of the Public-IP-subnet object
subnet x.x.x.248 255.255.255.248
network of the FTPserver object
Home 172.16.30.8
network of the object inside
192.168.10.0 subnet 255.255.255.0
network of the VPN_SSL object
10.101.4.0 subnet 255.255.255.0
outside_in list extended access permit tcp any newspaper object Mailserver_DMZ eq www
outside_in list extended access permit tcp any newspaper EQ 587 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper SMTP object Mailserver_DMZ eq
outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq pop3 object
outside_in list extended access permit tcp any newspaper EQ 2525 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq imap4 object
outside_in list extended access permit tcp any newspaper EQ 465 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper EQ 993 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper EQ 995 object Mailserver_DMZ
outside_in list extended access permit tcp any newspaper EQ 5901 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper Mailserver_DMZ eq https object
Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel
vpn_SplitTunnel list standard access allowed 192.168.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer to 8192
logging trap warnings
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
local pool VPN_SSL 10.101.4.1 - 10.101.4.4 255.255.255.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 647.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source inside inside static destination VPN_SSL VPN_SSL
NAT (exterior, Interior) static source VPN_SSL VPN_SSL
!
network obj_any1 object
NAT static interface (indoor, outdoor)
network of the Webserver_DMZ object
NAT (dmz, outside) static x.x.x.250
network of the Mailserver_DMZ object
NAT (dmz, outside) static x.x.x.. 251
the object DMZ network
NAT (dmz, outside) static interface
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 x.x.x.254 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol Ganymede HNIC +.
AAA-server host 192.168.10.2 HNIC (inside)
Timeout 60
key *.
identity of the user by default-domain LOCAL
Console HTTP authentication AAA HNIC
AAA console HNIC ssh authentication
Console AAA authentication telnet HNIC
AAA authentication secure-http-client
http 192.168.10.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ca trustpoint localtrust
registration auto
Configure CRL
Crypto ca trustpoint VPN_Articulate2day
registration auto
name of the object CN = vpn.articulate2day.com
sslvpnkey key pair
Configure CRL
Telnet 192.168.10.0 255.255.255.0 inside
Telnet timeout 30
SSH 192.168.10.0 255.255.255.0 inside
SSH timeout 15
SSH version 2
Console timeout 0
No vpn-addr-assign aaa

DHCP-client update dns
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd outside auto_config
!
dhcpd address 192.168.10.100 - 192.168.10.150 inside
dhcpd allow inside
!
dhcpd address dmz 172.16.30.20 - 172.16.30.23
dhcpd enable dmz
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
authenticate the NTP
NTP server 192.168.10.2
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-linux-64-3.1.06079-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal VPN_SSL group policy
VPN_SSL group policy attributes
value of server DNS 8.8.8.8
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_SplitTunnel
the address value VPN_SSL pools
WebVPN
activate AnyConnect ssl dtls
AnyConnect Dungeon-Installer installed
AnyConnect ssl keepalive 15
AnyConnect ssl deflate compression
AnyConnect ask enable
ronmitch50 spn1SehCw8TvCzu7 encrypted password username
username ronmitch50 attributes
type of remote access service
type tunnel-group VPN_SSL_Clients remote access
attributes global-tunnel-group VPN_SSL_Clients
address VPN_SSL pool
Group Policy - by default-VPN_SSL
tunnel-group VPN_SSL_Clients webvpn-attributes
enable VPNSSL_GNS3 group-alias
type tunnel-group VPN_SSL remote access
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect esmtp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: end

XXXX #.

You do not have this configuration:
```
 object network DMZ nat (dmz,outside) static interface
```
Try and take (or delete):
```
 object network DMZ nat (dmz,outside) dynamic interface
```

AnyConnect VPN setup problem

Hi all, I'm going to have bad configure anyconnect VPN on my router. I'm CCENT pre level and especially followed a tutorial, but feel I'm missing something simple here.

It's a fairly simple installation on a Cisco No. 2851 - faces of a single interface my LAN 192.168.1.0/24, the other has a public IP address.

I created a network 192.168.2.0/24 VPN users, mainly to have phones Android connection of their mobile phone networks, and have access to the servers/security cameras/etc by using their local IP addresses. When my phone connects, it gets an IP address and is connected, but is not communicating with my LAN correctly.

The VPN client can ping 192.168.1.254 (the router's LAN IP) - but not the other devices on the network. However, the devices on my LAN can ping the VPN clients to their address 192.168.2.x.

Here's a copy of my current config, I have reorganized some elements with #s. Also pasted my ip sh road under him. Do not forget that I am a novice, please forgive the hack :)

Router (config) #do sh run
Building configuration...

Current configuration: 5782 bytes
!
! Last modification of the configuration at 02:24:24 UTC Sat Sep 5 2015 by #.
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
host name #.
!
boot-start-marker
boot-end-marker
!
!
enable secret $5 1$ 0 #.
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login local sslvpn
AAA authorization exec default local
!
!
!
!
!
AAA - the id of the joint session
!
!
dot11 syslog
no ip source route
!
!
IP cef
!
DHCP excluded-address 192.168.1.200 IP 192.168.1.254
DHCP excluded-address 192.168.1.1 IP 192.168.1.10
!
pool of dhcp IP LAN
network 192.168.1.0 255.255.255.0
Server DNS 192.168.1.254
by default-router 192.168.1.254
!
!
IP domain name # '.com'
host IP Switch 192.168.1.253
8.8.8.8 IP name-server
block connection-for 2000 tent 4 within 60
connection access silencer-class SSH_MGMT
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
!
!
!
!
voice-card 0
!
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TRUSTPOINT-MY
enrollment selfsigned
Serial number
name of the object CN = 117-certificate
crl revocation checking
rsakeypair my-rsa-keys
!
!
MY-TRUSTPOINT crypto pki certificate chain
certificate self-signed 01
##########################

#########################
quit smoking
!
!
license udi pid CISCO2851 sn FTX1026A54Y
# 5 secret username $1$ yv # E9.
# 5 secret username $1$ X0nL ###kO.
!
redundancy
!
!
property intellectual ssh version 2
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
LAN description
IP 192.168.1.254 255.255.255.0
IP nat inside
No virtual-reassembly in ip
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
WAN description
No dhcp client ip asks tftp-server-address
No dhcp ip client application-domain name
DHCP IP address
IP access-group ACL-WAN_INTERFACE in
no ip redirection
no ip proxy-arp
NAT outside IP
No virtual-reassembly in ip
automatic duplex
automatic speed
No cdp enable
!
interface Serial0/0/0
no ip address
Shutdown
!
interface virtual-Template1
!
local IP 192.168.2.100 WEBVPN-POOL pool 192.168.2.110
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
The dns server IP
IP nat inside source list INSIDE_NAT_ADDRESSES interface GigabitEthernet0/1 overload
!
IP access-list standard INSIDE_NAT_ADDRESSES
permit 192.168.1.0 0.0.0.255
permit 192.168.2.0 0.0.0.255
IP access-list standard SSH_MGMT
permit 192.168.1.0 0.0.0.255
permit 207.210.0.0 0.0.255.255
!
IP extended ACL-WAN_INTERFACE access list
deny udp any any eq snmp
TCP refuse any any eq field
TCP refuse any any eq echo
TCP refuse any any day eq
TCP refuse any any eq chargen
TCP refuse any any eq telnet
TCP refuse any any eq finger
deny udp any any eq field
deny ip 127.0.0.0 0.255.255.255 everything
deny ip 192.168.0.0 0.0.255.255 everything
permit any any eq 443 tcp
allow an ip
!
exploitation forest esm config
NLS RESP-timeout 1
CPD cr id 1
!
!
!
!
!
!
!
control plan
!
!
!
!
profile MGCP default
!
!
!
!
!
access controller
Shutdown
!
!
!
Line con 0
exec-timeout 0 0
Synchronous recording
line to 0
exec-timeout 0 0
Synchronous recording
line vty 0 4
exec-timeout 0 0
Synchronous recording
entry ssh transport
line vty 5 15
exec-timeout 0 0
Synchronous recording
entry ssh transport
!
Scheduler allocate 20000 1000
!
Gateway Gateway-WebVPN-Cisco WebVPN
IP interface GigabitEthernet0/1 port 443
SSL rc4 - md5 encryption
SSL trustpoint TRUSTPOINT-MY
development
!
WebVPN install svc flash:/webvpn/anyconnect-linux-3.1.03103-k9.pkg sequence 1
!
WebVPN context Cisco WebVPN
title "Firewall.cx WebVPN - powered by Cisco"
SSL authentication check all
!
list of URLS "rewrite".
!
ACL "ssl - acl.
ip permit 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
Licensing ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
!
login message "Cisco Secure WebVPN"
!
webvpnpolicy political group
functions required svc
filter tunnel ssl - acl
SVC-pool of addresses 'WEBVPN-POOL' netmask 255.255.255.0
generate a new key SVC new-tunnel method
SVC split include 192.168.1.0 255.255.255.0
Group Policy - by default-webvpnpolicy
AAA authentication list sslvpn
Gateway Cisco WebVPN bridge
Max-users 5
development
!
end

Gateway of last resort is #. ###. ###. # network 0.0.0.0

S * 0.0.0.0/0 [254/0] via #. ###. ###.1
(###ISP))) is divided into subnets, subnets 1
S (# #ISP #) [254/0] via (# publicgateway #) GigabitEthernet0/1
###.###.0.0/16 is variably divided into subnets, 2 subnets, 2 masks
C ###.###.###.0/23 is directly connected, GigabitEthernet0/1
The ###.###.###.###/32 is directly connected, GigabitEthernet0/1
192.168.1.0/24 is variably divided into subnets, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, GigabitEthernet0/0
The 192.168.1.254/32 is directly connected, GigabitEthernet0/0
192.168.2.0/32 is divided into subnets, subnets 1
S 192.168.2.100 [0/0] via 0.0.0.0, Virtual Network1

can you try to disable the FW on your internal lan hosts and then try and ping from users of vpn client

Lock the AnyConnect VPN with broader access list

I'm trying to lock my AnyConnect VPN interface. I use the split tunneling. I want only to http tunnel traffic to an external http server we have and ftp to another external server behave. I don't want anything else through the tunnel or anywhere else allowed on our network. My current setup, I can connect to the vpn and the servers ping external ip address, but not by name. I can also not navigate anywhere else while I'm connected. It is not imperative for me to navigate anywhere else, when you are connected, but I need to allow only access specified above.

Configuration:

attributes Anyconnect-group policy

VPN-tunnel-Protocol svc webvpn

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list WebAccessVPN

WebVPN

list of URLS no

SVC request to enable default webvpn

WebAccessVPN list extended access allow icmp disable any newspaper host FTP - EXT object-group Ping_and_Trace

External FTP FTP access WebAccessVPN-list comment

WebAccessVPN list extended access permitted tcp disable no matter what newspaper to host FTP - EXT object-group DM_INLINE_TCP_2

WebAccessVPN list extended access allow icmp disable any newspaper host LICENSING-EXT object-group Ping_and_Trace

WebAccessVPN list extended access allowed object-group TCPUDP any LICENSING-EXT eq www log disable host

WebAccessVPN list extended access deny ip any object-group DM_INLINE_NETWORK_1

You can use the vpn filter under the attributes of political group. In the vpn-filter, you can reference the access list you created.

Select the timeout on ASA Cisco Anyconnect VPN

Hello world

I use the Cisco Anyconnect VPN client with the ASA 5540 firewall. I need allow a time-out on the VPN clients, so they log off after x hours of inactivity.

Thank you to

Best respect

Hello

To my understanding of the default timeout value is 30 minutes

You should be able to change this setting in the "username" configurations (if you use LOCAL AAA on the SAA) or under the configurations of the 'group policy' .

The command is

VPN-idle-timeout

Here is the link of the commands reference

http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

-Jouni

Cisco asa anyconnect vpn client mode issue

Hi team,

I get my users anyconnect vpn connection failures very frequently and it that comesup.

Can you please check see the version attached and explain, if I run with licenses right into place.

concerning

SecIT

Hello

You've got license for 250 users anyconnect so unless you are having more users than this number, it shouldn't be a problem. Debugs could help reduce the problem in this case.

Kind regards
Dinesh Moudgil

PS Please rate helpful messages.

AnyConnect VPN session disconnect and reconnect

I have a firewall cisco ASA 5525-X set up to accept the AnyConnect VPN client (IKEv2) connection.

AnyConnect VPN client can successfully connect.

During the 1st 10 minutes after logging in, will the client Anyconnect VPN lost VPN connection for a few seconds (ranging from 3 seconds to 10 seconds), then it automatically reconnect back. After that, no more lost connection times.

The lost connection happened at all multiple. So far, all at least 4 show the same problem.

It does not affect the operation of the network, but it gives an unpleasant impression for users.

I tried to surveillance of the ASDM firewall logs, no newspaper of no errors.

I use Wireshark to capture traffic on the client side, also no errors detected.

Can idea how I can continue to troubleshoot this problem?

Hi Limlayhin,

You can go ahead and capture logs of dart. You can download the Pack of dart for the anyconnect version you use and that you run after you experience this problem. Please make sure that everything you clear observer logs event before you launch you the Anyconnect client.

To clear the observer event logs, follow these steps:

1. start > run > Eventvwr

2. it will then open Event Viewer Window

3 maximize the application logs and services and that you will find an option "Cisco Anyconnect Secure Mobility Client"

4. right click on the Cisco Anyconnect Secure Mobility Client and select clear logs. Select clear after that.

Once you are done with this, launch the anyconnect connection and allow the problem to happen. Once the problem occurs, unplug the anyconnect client and run newspapers dart. It will create a Zip file on your desktop (by default) and you can go through the logs of connection Anyconnect to look for the root cause.

Let me know if it helps.

Vishnu

AnyConnect VPN for Cisco ASA 5505 refused connections

I'm trying to set up my Cisco 5505 with AnyConnect VPN client VPN access. Here is the relevant information of my config:

interface Vlan2
mac-address xxxx.xxxx.xxxx
nameif outside
security-level 0
ip address A.A.A.A 255.255.255.240
!
access-list outside_access_in extended permit tcp any host C.C.C.C eq pptp
access-list outside_access_in extended permit tcp any host C.C.C.C eq https
access-list outside_access_in extended permit tcp any host C.C.C.C eq ftp
access-list outside_access_in extended permit tcp any host C.C.C.D eq https
access-list outside_access_in extended permit tcp any host C.C.C.D eq ftp
access-list outside_access_in extended permit tcp any host C.C.C.D eq www
access-list outside_access_in extended permit tcp any host C.C.C.C eq smtp
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any host C.C.C.D eq ssh
access-list outside_access_in extended permit tcp any host C.C.C.D eq 8080
access-list outside_access_in extended permit gre any host C.C.C.C
access-list outside_access_out extended permit ip any any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip any interface outside
access-list inside_access_out extended permit ip any any

access-group inside_access_in in interface inside
access-group inside_access_out out interface inside
access-group outside_access_in in interface outside
access-group outside_access_out out interface outside

webvpn
enable inside
enable outside
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable

group-policy DfltGrpPolicy attributes
dns-server value X.X.X.X
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value
address-pools value palm
webvpn
svc rekey time 30
svc rekey method ssl
svc ask enable default webvpn

policy-map global_policy
class inspection_default
inspect pptp
inspect http
inspect icmp
inspect ftp
!

When I try to connect, I get this error in the real-time log viewer:

TCP access denied by ACL from X.X.X.X/57356 to outside:A.A.A.A/443

Here are the details of the license:

Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                        : 3, DMZ Restricted
Inside Hosts                 : Unlimited
Failover                     : Disabled
VPN-DES                      : Enabled
VPN-3DES-AES                 : Enabled
SSL VPN Peers                : 2
Total VPN Peers              : 10
Dual ISPs                    : Disabled
VLAN Trunk Ports             : 0
Shared License               : Disabled
AnyConnect for Mobile        : Disabled
AnyConnect for Linksys phone : Disabled
AnyConnect Essentials        : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions      : 2
Total UC Proxy Sessions      : 2
Botnet Traffic Filter        : Disabled

This platform has a Base license.

Can someone tell me what I am doing wrong or what access list I'm missing?

I have two Cisco ASA 5510 firewall with a similar setup configuration and the AnyConnect SSL VPN works great.

Hi Matt,

You are probably landing on the tunnel-group by default - you will need to indicate which group to connect to the client. This can be done in different ways - I see that you already have a defined group aliases, but to be able to use that you must configure:

WebVPN

tunnel-group-list activate

Alternatively, if you have only a single group, you can add 'group-url https://yourasa.yourcompany.com/ permit' to the webvpn attributes tunnel-group.

HTH

Herbert

Setup for use with Cisco Anyconnect VPN IPsec

So, I had trouble setting up VPN on our ASA 5510. I would use IPsec VPN so that we don't have to worry about licensing issues, but what I have read you can do with and always use Cisco Anyconnect. My knowledge on how to set up VPN especially in iOS version 8.4 is limited, so I've been using a combination of command line and ASDM.

I am finally able to connect from a remote location, but once I log in, nothing else works. What I've read, you can use IPsec for client-to-lan connections. I use a pre-shared for this. Documentation is limited on what should happen after have connected you? Shouldn't be able to local access on the vpn connection computers? I'm trying to implement work. If I have VPN from home, should not be able to access all of the resources at work? According to me, because I used the command-line as ASDM I confused some of the configuration. In addition, I think that some of the default policies are confused me too. So I probably need a lot of help. Here is my current setup with the changed IP address and other things that are not related to deleted VPN.

NOTE: We are still testing this ASA and is not in production.

Any help you can give me is greatly appreciated.

ASA Version 8.4 (2)

!

ASA host name

domain.com domain name

!

interface Ethernet0/0

nameif inside

security-level 100

the IP 192.168.0.1 255.255.255.0

!

interface Ethernet0/1

nameif outside

security-level 0

IP 50.1.1.225 255.255.255.0

!

interface Ethernet0/2

Shutdown

No nameif

no level of security

no ip address

!

interface Ethernet0/3

Shutdown

No nameif

no level of security

no ip address

!

interface Management0/0

No nameif

security-level 100

IP 192.168.1.1 255.255.255.0

!

boot system Disk0: / asa842 - k8.bin

passive FTP mode

DNS domain-lookup outside

DNS server-group DefaultDNS

!

permit same-security-traffic intra-interface

!

network of the NETWORK_OBJ_192.168.0.224_27 object

subnet 192.168.0.224 255.255.255.224

!

object-group service VPN

ESP service object

the purpose of the tcp destination eq ssh service

the purpose of the tcp destination eq https service

the purpose of the service udp destination eq 443

the destination eq isakmp udp service object

!

allowed IP extended ip access list a whole

!

mask 192.168.0.225 - 192.168.0.250 255.255.255.0 IP local pool VPNPool

no failover

failover time-out period - 1

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 645.bin

don't allow no asdm history

ARP timeout 14400

NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 non-proxy-arp-search to itinerary

!

the object of the LAN network

NAT dynamic interface (indoor, outdoor)

Access-group outside_in in external interface

Route outside 0.0.0.0 0.0.0.0 50.1.1.250 1

Sysopt noproxyarp inside

Sysopt noproxyarp outdoors

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec ikev2 ipsec-proposal OF

encryption protocol esp

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 proposal ipsec 3DES

Esp 3des encryption protocol

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 ipsec-proposal AES

Esp aes encryption protocol

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 ipsec-proposal AES192

Protocol esp encryption aes-192

Esp integrity sha - 1, md5 Protocol

Crypto ipsec ikev2 AES256 ipsec-proposal

Protocol esp encryption aes-256

Esp integrity sha - 1, md5 Protocol

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

Crypto ca trustpoint ASDM_TrustPoint0

registration auto

name of the object CN = ASA

Configure CRL

crypto ca server

Shutdown

string encryption ca ASDM_TrustPoint0 certificates

certificate d2c18c4e

864886f7 0d06092a c18c4e30 308201f3 3082015c a0030201 d 020204 2 0d 010105

0500303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609

02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109

3131 31303036 31393133 31365a 17 323131 30303331 39313331 0d 170d 6f6d301e

365a303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609

02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109

6f6d3081 9f300d06 092 has 8648 86f70d01 01010500 03818d b 30818902-00-818100-2

8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b

37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c

234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c 51782

3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02

03010001 300 d 0609 2a 864886 f70d0101 05050003 8181009d d2d4228d 381112a 1

cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc

18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6

beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef

af72e31f a1c4a892 d0acc618 888b53d1 9b 888669 70e398

quit smoking

IKEv2 crypto policy 1

aes-256 encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 10

aes-192 encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 20

aes encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 30

3des encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

IKEv2 crypto policy 40

the Encryption

integrity sha

Group 2 of 5

FRP sha

second life 86400

Crypto ikev2 activate out of service the customer port 443

Crypto ikev2 access remote trustpoint ASDM_TrustPoint0

Crypto ikev1 allow outside

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 65535

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH timeout 10

Console timeout 0

management-access inside

SSL-trust outside ASDM_TrustPoint0 point

WebVPN

allow outside

AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2

AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3

profiles of AnyConnect VPN disk0: / devpn.xml

AnyConnect enable

tunnel-group-list activate

internal VPN group policy

attributes of VPN group policy

value of server WINS 50.1.1.17 50.1.1.18

value of 50.1.1.17 DNS server 50.1.1.18

Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client

digitalextremes.com value by default-field

WebVPN

value of AnyConnect VPN type user profiles

always-on-vpn-profile setting

privilege of xxxxxxxxx encrypted password username administrator 15

VPN1 xxxxxxxxx encrypted password username

VPN Tunnel-group type remote access

General-attributes of VPN Tunnel-group

address (inside) VPNPool pool

address pool VPNPool

LOCAL authority-server-group

Group Policy - by default-VPN

VPN Tunnel-group webvpn-attributes

enable VPN group-alias

Group-tunnel VPN ipsec-attributes

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

class-map ips

corresponds to the IP access list

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

Review the ip options

inspect the netbios

inspect the rsh

inspect the rtsp

inspect the skinny

inspect esmtp

inspect sqlnet

inspect sunrpc

inspect the tftp

inspect the sip

inspect xdmcp

inspect the http

class ips

IPS inline help

class class by default

Statistical accounting of user

I would recommend buy AnyConnect Essentials. The cost of the license is nominal - list of US $150 for the 5510. (piece number L-ASA-AC-E-5510 =)

Meawwhile you can use the Cisco VPN client inherited with IKEv1 IPSec remote access VPN using profiles *.pcf.

I believe you can also use the client Anyconnect client SSL or DTLS transport access remotely (non-IPsec) without having to buy the license Anyconnect Essentials for your ASA focus.

As an aside, note that if you want to use AnyConnect Mobile (e.g. for iPhone, iPad, Android, Blackberry etc.clients) you will also get the additional license for it (L-ASA-AC-M-5510 =, also price US $150)

AnyConnect VPN phone

I'm working on the Anyconnect VPN configuration for a customer phone. I created a separate group of tunnel and the group policy for both phones. For the part of CM, I worked with one of our engineers to voice for the configured part. However, when you try to connect a phone to the VPN, authentication fails. I did a debug and see what follows:

webvpn_allocate_auth_struct: net_handle = 0x00007ffecba268a0

webvpn_portal.c:webvpn_determine_primary_username [6136]

webvpn_portal.c:webvpn_determine_secondary_username [6204]

webvpn_portal.c:ewaFormServe_webvpn_login [2258]

webvpn_portal.c:http_webvpn_kill_cookie [1053]

webvpn_free_auth_struct: net_handle = 0x00007ffecba268a0

webvpn_allocate_auth_struct: net_handle = 0x00007ffecba268a0

webvpn_free_auth_struct: net_handle = 0x00007ffecba268a0

webvpn_allocate_auth_struct: net_handle = 0x00007ffecf386600

webvpn_portal.c:ewaFormSubmit_webvpn_login [3600]

webvpn_portal.c:webvpn_login_validate_net_handle [2514]

webvpn_portal.c:webvpn_login_allocate_auth_struct [2534]

webvpn_portal.c:webvpn_login_assign_app_next [2552]

webvpn_portal.c:webvpn_login_cookie_check [2569]

webvpn_portal.c:webvpn_login_set_tg_buffer_from_form [2626]

webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie [2660]

webvpn_login_transcend_cert_auth_cookie: tg_cookie = 0CISCO-PHONES, tg_name =

webvpn_portal.c:webvpn_login_set_tg_cookie_form [2722]

webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string [2774]

webvpn_portal.c:webvpn_login_resolve_tunnel_group [2847]

webvpn_login_resolve_tunnel_group: tgCookie = 0CISCO-PHONES

webvpn_login_resolve_tunnel_group: url tunnel group name

webvpn_login_resolve_tunnel_group: TG_BUFFER = CISCO-PHONES

webvpn_portal.c:webvpn_login_negotiate_client_cert [2937]

webvpn_portal.c:webvpn_login_check_cert_status [3035]

webvpn_portal.c:webvpn_login_cert_only [3083]

webvpn_portal.c:webvpn_login_primary_username [3105]

webvpn_portal.c:webvpn_determine_primary_username [6136]

webvpn_portal.c:webvpn_determine_secondary_username [6204]

webvpn_portal.c:ewaFormServe_webvpn_login [2258]

webvpn_portal.c:http_webvpn_kill_cookie [1053]

webvpn_free_auth_struct: net_handle = 0x00007ffecf386600

webvpn_allocate_auth_struct: net_handle = 0x00007ffecf386600

webvpn_free_auth_struct: net_handle = 0x00007ffecf386600

I can see the phone tent to connect through the display of the real-time log in ASDM, so he tries to connect. I don't know why it fails however.

TIA for any help. If you need more information, let me know.

Dan

Hi deyster94

'Anyconnect of Cisco VPN phone' you licensed?

Load you the certificate into the call manager?

Load the certificate on the SAA?

Did you leave the phone register once inside company network until you tried conencting the VPN?

You have the strategy of group tunnel for the authentication of the certificate?

AnyConnect vpn client gives error of certificate on ios cisco 2800 series

Dear all,

I set up a vpn on cisco router ios simple anyconnect 2811

I also configured natting on the inorder of router to access the internet for local users

My problem

I can not connect same vpn if I use the method of the anyconnect vpn client

Also please tell me how to access internal resources by configuring split tunneling

the error I get is as below

* 08:16:35.947 Feb 8: 252:error:14094416:SSL routines: SSL3_READ_BYTES:sslv3 certificate alert unknown:../../../../cisco.comp/pki_ssl/src/openssl/dist/ssl/s3_pkt
.c:1062:SSL alert number 46

Here is my configuration

ABC host name
!

start the flash system: c2800nm-advsecurityk9 - mz.124 - 24.T1.bin

!
AAA new-model
!
!
AAA authentication login default local
local connection SSL-VPN-AUTH authentication AAA
!
!
AAA - the id of the joint session
!
dot11 syslog
IP source-route
!
!
IP cef
!
!
IP-server names 4.2.2.2
!
Authenticated MultiLink bundle-name Panel
!
!
!
Crypto pki trustpoint ABC
enrollment selfsigned
crl revocation checking
rsakeypair ABC 1024
!
!
ABC crypto pki certificate chain
self-signed certificate 04
3082023 HAS 308201 3 A0030201 02020104 300 D 0609 2A 864886 F70D0101 04050030
27312530 2306092A 864886F7 0D 010902 73 732 6569 6173742D 6B 686177 16166D
616E6565 6A2D7261 31313032 30383038 32333036 5A170D32 30303130 301E170D
3030305A 31303030 30273125 30230609 2 A 864886 F70D0109 0216166D 65 73732
2D6B6861 69617374 77616E65 656A2D72 6130819F 300 D 0609 2A 864886 F70D0101
01050003 818 0030 81890281 8100C16D 1007E434 AFAEE3C1 90141205 E7785754
FA3C4589 3D6B3D47 57BC54A5 7237E7FE 9B7CA69C 999B4DAF 835B98E9 972CFD03
5A43488C 05E82E10 9B540AB9 5A54AB0C 525FED0E 05B6F2FF 6703F0BD F28AE6F2
9E98298D E184CCDC 2D54741D 589 9731 C2BA5191 59DC7DC8 1F03C116 DDCF21EB D
0BB4E931 02F61F64 D64A6F36 92F70203 010001A 3 76307430 0F060355 1 130101
FF040530 030101FF 30210603 551D 1104 1A 301882 7373 656961 2 73742D6B 166D
68617761 2 726130 1 230418 30168014 2FA1E05E 1BD981A0 1F060355 6E65656A
A3485444 0B151D9E 44A3F6F6 301D 0603 551D0E04 1604142F A1E05E1B D981A0A3
4854440B 151D9E44 A3F6F630 0D06092A 864886F7 010104 05000381 810096EF 0D
39D4EEED E3CA162B E6BC1B61 0C3C66ED 02884209 0F4B54F1 BA7BEFF4 CAA206CE
44 C 99817 134363 2 F29A9E6A 945AA1B4 E4B85ED7 1800DAA1 30BE25C3 8340AE80
714F8FBD 9A433C4B 3EE2204D 88F7AB6D 929B5C88 5E7BC2B9 25754390 1622DB7B
EEB11694 F381E995 59C825BE 52EA5923 F87C43A3 98744BE8 BB27C381 BE14
quit smoking
!
!
privilege of username XXXX XXXX 15
username password ABC ABC
Archives
The config log
hidekeys
!
!
!
!
!
!
!
!
interface FastEthernet0/0
IP address | public IP address. 255.255.255.252
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/1
IP 192.168.0.7 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/2/0
no ip address
Shutdown
automatic duplex
automatic speed
!
local pool IP 10.10.10.1 intranet 10.10.10.254
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 GATEWAY
no ip address of the http server
IP http secure server
!
!
IP nat inside source map route sheep interface FastEthernet0/0 overload
!
extended IP access allow-traffic-to-lan list
deny ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
Licensing ip 192.168.0.0 0.0.0.255 any
!
access-list 101 permit ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
!
!
!
sheep allowed 10 route map
match ip address allow-traffic-to-lan
!
!
!
WebVPN EIAST gateway
IP address | public-ip | port 443
redirect http port 80
SSL trustpoint ABC
development
!
WebVPN install svc flash:/webvpn/anyconnect-win-2.5.2018-k9.pkg sequence 1
!
WebVPN context XYZ
SSL authentication check all
!
!
political group XYZ
functions compatible svc
SVC-pool of addresses "intranet".
SVC split include 10.10.10.0 255.255.255.0
SVC-Server primary dns 213.42.20.20
Group Policy - by default-XYZ
list of authentication SSL-VPN-AUTH of AAA.
area of bridge XYZ XYZ
10 Max-users
development
!
end

Thank you

Jvalin

You could hit the next bug

CSCtb73337 AnyConnect does not work with IOS if cert not trust/name of offset
which is set at 12.4 (24) T02.

Please update the code and give it a try.

AnyConnect VPN log in failure

Similar Questions

Maybe you are looking for