Cisco asa anyconnect vpn client mode issue

Hi team,

I get my users anyconnect vpn connection failures very frequently and it that comesup.

Can you please check see the version attached and explain, if I run with licenses right into place.

concerning

SecIT

Hello

You've got license for 250 users anyconnect so unless you are having more users than this number, it shouldn't be a problem. Debugs could help reduce the problem in this case.

Kind regards
Dinesh Moudgil

PS Please rate helpful messages.

Tags: Cisco Security

Similar Questions

LAN ASA 5505 VPN client access issue

Hello

I'm no expert in ASA and routing so I ask support the following case.

There is a (running on Windows 7) Cisco VPN client and an ASA5505.

The objectives are client can use the gateway remote on SAA for Skype and able to access devices in SAA within the interface.

The Skype works well, but I can't access devices in the interface inside through a VPN connection.

Can you please check my following config and give me any advice to fix NAT or VPN settings?

ASA Version 7.2 (4)

!

ciscoasa hostname

domain default.domain.invalid

activate wDnglsHo3Tm87.tM encrypted password

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.1.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address dhcp setroute

!

interface Vlan3

prior to interface Vlan1

nameif dmz

security-level 50

no ip address

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

DNS server-group DefaultDNS

domain default.domain.invalid

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

inside_access_in list extended access permitted tcp 192.168.1.0 255.255.255.0 any

inside_access_in list extended access permitted udp 192.168.1.0 255.255.255.0 any

outside_access_in list of allowed ip extended access entire 192.168.1.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

MTU 1500 dmz

local pool VPNPOOL 10.0.0.200 - 10.0.0.220 255.255.255.0 IP mask

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 524.bin

don't allow no asdm history

ARP timeout 14400

NAT-control

Global 1 interface (outside)

NAT (inside) 1 10.0.0.0 255.255.255.0

NAT (inside) 1 192.168.1.0 255.255.255.0

NAT (outside) 1 10.0.0.0 255.255.255.0

inside_access_in access to the interface inside group

Access-group outside_access_in in interface outside

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

the ssh LOCAL console AAA authentication

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto-map dynamic outside_dyn_map pfs set 20 Group1

Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH 192.168.1.0 255.255.255.0 inside

SSH timeout 5

SSH version 2

Console timeout 0

dhcpd outside auto_config

!

dhcpd address 192.168.1.2 - 192.168.1.33 inside

dhcpd dns xx.xx.xx.xx interface inside

dhcpd allow inside

!

attributes of Group Policy DfltGrpPolicy

No banner

WINS server no

value of server DNS 84.2.44.1

DHCP-network-scope no

VPN-access-hour no

VPN - connections 3

VPN-idle-timeout 30

VPN-session-timeout no

VPN-filter no

Protocol-tunnel-VPN IPSec l2tp ipsec webvpn

disable the password-storage

disable the IP-comp

Re-xauth disable

Group-lock no

disable the PFS

IPSec-udp disable

IPSec-udp-port 10000

Split-tunnel-policy tunnelall

Split-tunnel-network-list no

by default no

Split-dns no

Disable dhcp Intercept 255.255.255.255

disable secure authentication unit

disable authentication of the user

user-authentication-idle-timeout 30

disable the IP-phone-bypass

disable the leap-bypass

allow to NEM

Dungeon-client-config backup servers

MSIE proxy server no

MSIE-proxy method non - change

Internet Explorer proxy except list - no

Disable Internet Explorer-proxy local-bypass

disable the NAC

NAC-sq-period 300

NAC-reval-period 36000

NAC-by default-acl no

address pools no

enable Smartcard-Removal-disconnect

the firewall client no

rule of access-client-none

WebVPN

url-entry functions

HTML-content-filter none

Home page no

4 Keep-alive-ignore

gzip http-comp

no filter

list of URLS no

value of customization DfltCustomization

port - forward, no

port-forward-name value access to applications

SSO-Server no

value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. Contact your administrator for more information

SVC no

SVC Dungeon-Installer installed

SVC keepalive no

generate a new key SVC time no

method to generate a new key of SVC no

client of dpd-interval SVC no

dpd-interval SVC bridge no

deflate compression of SVC

internal group XXXXXX strategy

attributes of XXXXXX group policy

Protocol-tunnel-VPN IPSec

Split-tunnel-policy tunnelall

Split-tunnel-network-list no

XXXXXX G910DDfbV7mNprdR encrypted privilege 15 password username

username password encrypted XXXXXX privilege 0 5p9CbIe7WdF8GZF8

attributes of username XXXXXX

Strategy Group-VPN-XXXXXX

username privilege 15 encrypted password cRQbJhC92XjdFQvb XXXXX

tunnel-group XXXXXX type ipsec-ra

attributes global-tunnel-group XXXXXX

address VPNPOOL pool

Group Policy - by default-XXXXXX

tunnel-group ipsec-attributes XXXXXX

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

inspect the icmp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:a8fbb51b0a830a4ae823826b28767f23

: end

ciscoasa #.

Thanks in advance!

fbela

config #no nat (inside) 1 10.0.0.0 255.255.255.0< this="" is="" not="">

Add - config #same-Security-permit intra-interface

#access - extended list allowed sheep ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0

#nat (inside) 0 access-list sheep

Please add and test it.

Thank you

Ajay

Cisco ASA - Anyconnect VPN - DAP to restrict access

Hello

I havn't any way proven or description if this is possible with the asa. I'm trying to find a solution were based on the users of Active Directory groups are only in the use of VPN.

I wannt all "AllVPNUsers" users are able to connect and can only access a server in-house.

If a user is in the group "AllDevelopers-VPN" they should be able to access all the servers in a specified subnet

If a user is in the "AllDevOps" group they should not have any restrictions.

is it possible with one asa 5512-X?

Best regards

Daniel

Hi Daniel,.

You can use mapping of LDAP attributes where one ad group can be mapped to a group policy which will give access to specific networks.
Here is a document that you can reference. Please do not hesitate to share if there is no problem.

Kind regards
Dinesh Moudgil

PS Please rate helpful messages.

Cisco AnyConnect VPN Client maintains reconnection

Hello

We have recently installed an ASA5505 and activated the VPN access.

Two of my colleagues have no problems connecting to the VPN using Cisco AnyConnect VPN Client, but I do.

I am still disconnected after a few seconds with the message:

"A VPN reconnect gave rise to different configuration settings. VPN network interface is to be reset. Applications using the private network may be required to restart. »

Cisco AnyConnect VPN Client Version 2.5.2019

I work with Windows 7 but the same thing happens when I try to connect using my computer that is running Windows Vista.

My colleagues also using Win7

I also tried to disable the Windows Firewall.

Any help would be appreciated.

Best regards

Peter

TAC has been able to solve the problem. For webvpn mtu changed default from 1406 to 1200.

Not sure why 2 other ASAs we work very well otherwise though!

WebVPN
SVC mtu 1200

Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

Hi all

I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

Can anyone help me please with this.

Thank you

Zia

What is the local firewall on your computer?

AnyConnect vpn client gives error of certificate on ios cisco 2800 series

Dear all,

I set up a vpn on cisco router ios simple anyconnect 2811

I also configured natting on the inorder of router to access the internet for local users

My problem

I can not connect same vpn if I use the method of the anyconnect vpn client

Also please tell me how to access internal resources by configuring split tunneling

the error I get is as below

* 08:16:35.947 Feb 8: 252:error:14094416:SSL routines: SSL3_READ_BYTES:sslv3 certificate alert unknown:../../../../cisco.comp/pki_ssl/src/openssl/dist/ssl/s3_pkt
.c:1062:SSL alert number 46

Here is my configuration

ABC host name
!

start the flash system: c2800nm-advsecurityk9 - mz.124 - 24.T1.bin

!
AAA new-model
!
!
AAA authentication login default local
local connection SSL-VPN-AUTH authentication AAA
!
!
AAA - the id of the joint session
!
dot11 syslog
IP source-route
!
!
IP cef
!
!
IP-server names 4.2.2.2
!
Authenticated MultiLink bundle-name Panel
!
!
!
Crypto pki trustpoint ABC
enrollment selfsigned
crl revocation checking
rsakeypair ABC 1024
!
!
ABC crypto pki certificate chain
self-signed certificate 04
3082023 HAS 308201 3 A0030201 02020104 300 D 0609 2A 864886 F70D0101 04050030
27312530 2306092A 864886F7 0D 010902 73 732 6569 6173742D 6B 686177 16166D
616E6565 6A2D7261 31313032 30383038 32333036 5A170D32 30303130 301E170D
3030305A 31303030 30273125 30230609 2 A 864886 F70D0109 0216166D 65 73732
2D6B6861 69617374 77616E65 656A2D72 6130819F 300 D 0609 2A 864886 F70D0101
01050003 818 0030 81890281 8100C16D 1007E434 AFAEE3C1 90141205 E7785754
FA3C4589 3D6B3D47 57BC54A5 7237E7FE 9B7CA69C 999B4DAF 835B98E9 972CFD03
5A43488C 05E82E10 9B540AB9 5A54AB0C 525FED0E 05B6F2FF 6703F0BD F28AE6F2
9E98298D E184CCDC 2D54741D 589 9731 C2BA5191 59DC7DC8 1F03C116 DDCF21EB D
0BB4E931 02F61F64 D64A6F36 92F70203 010001A 3 76307430 0F060355 1 130101
FF040530 030101FF 30210603 551D 1104 1A 301882 7373 656961 2 73742D6B 166D
68617761 2 726130 1 230418 30168014 2FA1E05E 1BD981A0 1F060355 6E65656A
A3485444 0B151D9E 44A3F6F6 301D 0603 551D0E04 1604142F A1E05E1B D981A0A3
4854440B 151D9E44 A3F6F630 0D06092A 864886F7 010104 05000381 810096EF 0D
39D4EEED E3CA162B E6BC1B61 0C3C66ED 02884209 0F4B54F1 BA7BEFF4 CAA206CE
44 C 99817 134363 2 F29A9E6A 945AA1B4 E4B85ED7 1800DAA1 30BE25C3 8340AE80
714F8FBD 9A433C4B 3EE2204D 88F7AB6D 929B5C88 5E7BC2B9 25754390 1622DB7B
EEB11694 F381E995 59C825BE 52EA5923 F87C43A3 98744BE8 BB27C381 BE14
quit smoking
!
!
privilege of username XXXX XXXX 15
username password ABC ABC
Archives
The config log
hidekeys
!
!
!
!
!
!
!
!
interface FastEthernet0/0
IP address | public IP address. 255.255.255.252
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/1
IP 192.168.0.7 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/2/0
no ip address
Shutdown
automatic duplex
automatic speed
!
local pool IP 10.10.10.1 intranet 10.10.10.254
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 GATEWAY
no ip address of the http server
IP http secure server
!
!
IP nat inside source map route sheep interface FastEthernet0/0 overload
!
extended IP access allow-traffic-to-lan list
deny ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
Licensing ip 192.168.0.0 0.0.0.255 any
!
access-list 101 permit ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
!
!
!
sheep allowed 10 route map
match ip address allow-traffic-to-lan
!
!
!
WebVPN EIAST gateway
IP address | public-ip | port 443
redirect http port 80
SSL trustpoint ABC
development
!
WebVPN install svc flash:/webvpn/anyconnect-win-2.5.2018-k9.pkg sequence 1
!
WebVPN context XYZ
SSL authentication check all
!
!
political group XYZ
functions compatible svc
SVC-pool of addresses "intranet".
SVC split include 10.10.10.0 255.255.255.0
SVC-Server primary dns 213.42.20.20
Group Policy - by default-XYZ
list of authentication SSL-VPN-AUTH of AAA.
area of bridge XYZ XYZ
10 Max-users
development
!
end

Thank you

Jvalin

You could hit the next bug

CSCtb73337 AnyConnect does not work with IOS if cert not trust/name of offset
which is set at 12.4 (24) T02.

Please update the code and give it a try.

AnyConnect VPN client authentication using certificates

Guys, I'm trying to configure my ASA5505 to authenticate the AnyConnect VPN clients using certificates. I have 'Certificates' defined as my method of authentication in my AnyConnect connection profile (see screenshot), but I get 'Certificate Validation failure' whenever I try to connect. The certificate I want to use is a computer issued by my CA certificate company root (Windows Server 2008 running Active Directory Certificate Services). Screenshot of certificate is attached. I added the root certificate on the SAA, and I tried all kinds of combinations by using the corresponding certificate in the AnyConnect Client profile. Each attempt failed, and I'm having no luck finding documentation on how to proceed. Any help would be greatly appreciated!

Hello Shaun,

The problem you're describing, not be able to authenticate through certificate through Microsoft Internet Explorer, is the fact that the certificate is in the computer store. You do not want to confirm with Microsoft, but, I understand that only Microsoft Internet users explore the user store, this certificate is not available to attend the ASA via the Internet browser.

-Craig

AnyConnect VPN Client - works with IPsec

Hello

How can I do for AnyConnect VPN Client works with ipsec?

I tried with SSL and works normally.

But with IPsec does not work. Should I do something?

Thank you

Rodrigo

Rodrigo, Anyconnect works with SSL, in order to use IPSec, you must the Cisco VPN Client.

The ID attribute of the station call needs for Anyconnect VPN client MAC address

Hi all

We test tring Anyconnect VPN users to connect using the certificate. ASA East of validation / authentication user based on cert and approval it requires Radius server (ISE). Currently ASA sends the Ip address of the VPN client in «calling station ID» We want ASA to send the Anyconnect VPN client MAC address to the radius server in RADIUS attribute «calling station ID» Is it possible to do this. Get around them?

Parag salvation,

The calling Station ID always contains the IP if Anyconnect VPN.

L3 is originally unlike wireless which has L2 Assoc.

Currently no work around.

Respect of

Ed

Cisco and Checkpoint VPN clients on a single PC

Hello

I'm in the following fix:

I had used customer Checkpoint SecuRemote 4.1 SP - 5 VPN in the past.

Now, I have installed the Cisco VPN client version 4.0.4 on my PC to access IPSec VPN for the PIX in our headquarters.

According to Cisco VPN release notes http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/rel404/404clnt.htm#wp1346340 , it should be possible to have clients both Cisco and Checkpoint VPN installed on the same machine.

But I am not able to connect to my PIX, I receive the following error message:

"Secure the complete VPN connection locally by the Client.

Reason 403: failed to contact the security gateway. »

When I'm looking for signs of PC control-> system-> hardware-> device Administration-> network cards, I can see Cisco Systems VPN Adapter disabled.

After you activate manually, I always get the same error when you try to connect to the Cisco VPN client.

After PC restart the Cisco VPN adapter is disabled later.

I tried to uncheck Check Point SecuRemote form my Dial-up connection (bypassing CSCea31192 of bug, but the bug does not affect NAT - T connection which I use).

I noticed the same situation on three different computers, one running Windows XP, both running Windows 2000.

After uninstalling the client Checkpoint completely (including Windows registry manual removal), the Cisco VPN client works very well.

It seems to me, therefore, that there is a profound mismatch between Cisco and Checkpoint VPN clients.

Does anyone know of a workaround?

Thank you

Milan

We had the same problem with some of our users who need to use the two clients to connect to customer sites.

If I remember the cisco client does not start automatically, but the client of checkpoint 4.1 don't.

We by-passed by deleting the registry entry point control that starts the client at startup. fwenc.exe is the entrance and it is in

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

After that make a shortcut to the executable file that is stored in the directory \bin to relevant checkpoint on the client (it is different from NT & 9 client x) and then only start when it is necessary.

Hope that's a help

Cisco ASA 5510 VPN Site to Site with Sonicwall

I am trying to configure a tunnel between a Cisco ASA 5510 VPN (Version 8.2 (2)) and TZ200 Sonicwall. I rose tunnel and go and I am able to ping the internal IP address of Cisco ASA of the Sonicwall LAN but nothing work. When I try to ping a host behind the Cisco ASA of the Sonicwall LAN I get the following message "rules asymmetrical NAT matched for flows forward and backward; Connection for tcp src outside:10.20.10.x/xxxx dst inside:10.20.2.x/xxxx refused due to failure of reverse path of NAT"on the SAA

Googling the error above shows the problems with version 8.3 or later that resembled the nat commands have been changed SAA, train is still on 8.2 but I another common question does not add an exemption of NAT I have double-triple checked that I did add an exception rule of NAT of the hosts on the network from cisco for the guests of the Sonicwall network. Looks like I hit a road block so any help would be appreciated. Thank you

Here are a few excertps of the config file (10.20.2.0 behind the cisco) and 10.20.10.0 behind the sonicwall

NAT (inside) 0 access-list sheep

..

IP 10.20.2.0 allow Access-list extended sheep 255.255.255.0 10.20.10.0 255.255.255.0

access extensive list ip 10.20.2.0 outside_1_cryptomap allow 255.255.255.0 10.20.10.0 255.255.255.0

..

card crypto outside_map 1 match address outside_1_cryptomap

card crypto outside_map 1 set counterpart x.x.x.x

card crypto outside_map 1 set of transformation-ESP-3DES-SHA

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

..

crypto ISAKMP allow outside

crypto ISAKMP policy 5

preshared authentication

3des encryption

sha hash

Group 2

lifetime 28800

..

internal SiteToSitePolicy group strategy

attributes of Group Policy SiteToSitePolicy

VPN-idle-timeout no

Protocol-tunnel-VPN IPSec

Split-tunnel-network-list no

..

tunnel-group x.x.x.x type ipsec-l2l

tunnel-group x.x.x.x General attributes

Group Policy - by default-SiteToSitePolicy

tunnel-group ipsec-attributes x.x.x.x

pre-shared key *.

..

Added some excerpts from the configuration file

Hello Manjitriat,

Okay, detected IPSEC parody is normal, that means you are trying to send unencrypted on a line of encrypted packets.

Now, if you see on the plotter of package that traffic will hollow the VPN channel all its fine in your site.

Now the packet tracer must be something like this:

entrance to Packet-trace inside private_ip_lan destination_private_ip_lan 1025 tcp 80

Please provide us with the result of the following instructions after you run the packet tracer.

See the crypto Isakamp SA

See the crypto Ipsec SA

Kind regards

Julio

ASA Anyconnect VPN do not work or download the VPN client

I have a Cisco ASA 5505 that I try to configure anyconnect VPN and thought, I've changed my setup several times but trying to access my static public IP address of the external IP address to download the image, I am not able to. Also when I do a package tracer I see he has been ignored through the acl when the packets from side to the ASA via port 443, it drops because of the ACL. My DMZ so will he look like something trying to access the ASA via the VPN's going to port 443. Here is my config

XXXX # sh run
: Saved
:
ASA Version 8.4 (3)
!
hostname XXXX
search for domain name
activate pFTzVNrKdD9x5rhT encrypted password
zPBAmb8krxlXh.CH encrypted passwd
names of
!
interface Ethernet0/0
Outside-interface description
switchport access vlan 20
!
interface Ethernet0/1
Uplink DMZ description
switchport access vlan 30
!
interface Ethernet0/2
switchport access vlan 10
!
interface Ethernet0/3
switchport access vlan 10
!
interface Ethernet0/4
Ganymede + ID description
switchport access vlan 10
switchport monitor Ethernet0/0
!
interface Ethernet0/5
switchport access vlan 10
!
interface Ethernet0/6
switchport access vlan 10
!
interface Ethernet0/7
Description Wireless_AP_Loft
switchport access vlan 10
!
interface Vlan10
nameif inside
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Vlan20
nameif outside
security-level 0
IP address x.x.x.249 255.255.255.248
!
Vlan30 interface
no interface before Vlan10
nameif dmz
security-level 50
IP 172.16.30.1 255.255.255.0
!
boot system Disk0: / asa843 - k8.bin
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
DNS domain-lookup dmz
DNS server-group DefaultDNS
Name-Server 8.8.8.8
Server name 8.8.4.4
search for domain name
network obj_any1 object
subnet 0.0.0.0 0.0.0.0
network of the Webserver_DMZ object
Home 172.16.30.8
network of the Mailserver_DMZ object
Home 172.16.30.7
the object DMZ network
172.16.30.0 subnet 255.255.255.0
network of the FTPserver_DMZ object
Home 172.16.30.9
network of the Public-IP-subnet object
subnet x.x.x.248 255.255.255.248
network of the FTPserver object
Home 172.16.30.8
network of the object inside
192.168.10.0 subnet 255.255.255.0
network of the VPN_SSL object
10.101.4.0 subnet 255.255.255.0
outside_in list extended access permit tcp any newspaper object Mailserver_DMZ eq www
outside_in list extended access permit tcp any newspaper EQ 587 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper SMTP object Mailserver_DMZ eq
outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq pop3 object
outside_in list extended access permit tcp any newspaper EQ 2525 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq imap4 object
outside_in list extended access permit tcp any newspaper EQ 465 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper EQ 993 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper EQ 995 object Mailserver_DMZ
outside_in list extended access permit tcp any newspaper EQ 5901 Mailserver_DMZ object
outside_in list extended access permit tcp any newspaper Mailserver_DMZ eq https object
Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel
vpn_SplitTunnel list standard access allowed 192.168.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer to 8192
logging trap warnings
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
local pool VPN_SSL 10.101.4.1 - 10.101.4.4 255.255.255.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 647.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source inside inside static destination VPN_SSL VPN_SSL
NAT (exterior, Interior) static source VPN_SSL VPN_SSL
!
network obj_any1 object
NAT static interface (indoor, outdoor)
network of the Webserver_DMZ object
NAT (dmz, outside) static x.x.x.250
network of the Mailserver_DMZ object
NAT (dmz, outside) static x.x.x.. 251
the object DMZ network
NAT (dmz, outside) static interface
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 x.x.x.254 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol Ganymede HNIC +.
AAA-server host 192.168.10.2 HNIC (inside)
Timeout 60
key *.
identity of the user by default-domain LOCAL
Console HTTP authentication AAA HNIC
AAA console HNIC ssh authentication
Console AAA authentication telnet HNIC
AAA authentication secure-http-client
http 192.168.10.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ca trustpoint localtrust
registration auto
Configure CRL
Crypto ca trustpoint VPN_Articulate2day
registration auto
name of the object CN = vpn.articulate2day.com
sslvpnkey key pair
Configure CRL
Telnet 192.168.10.0 255.255.255.0 inside
Telnet timeout 30
SSH 192.168.10.0 255.255.255.0 inside
SSH timeout 15
SSH version 2
Console timeout 0
No vpn-addr-assign aaa

DHCP-client update dns
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd outside auto_config
!
dhcpd address 192.168.10.100 - 192.168.10.150 inside
dhcpd allow inside
!
dhcpd address dmz 172.16.30.20 - 172.16.30.23
dhcpd enable dmz
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
authenticate the NTP
NTP server 192.168.10.2
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-linux-64-3.1.06079-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal VPN_SSL group policy
VPN_SSL group policy attributes
value of server DNS 8.8.8.8
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_SplitTunnel
the address value VPN_SSL pools
WebVPN
activate AnyConnect ssl dtls
AnyConnect Dungeon-Installer installed
AnyConnect ssl keepalive 15
AnyConnect ssl deflate compression
AnyConnect ask enable
ronmitch50 spn1SehCw8TvCzu7 encrypted password username
username ronmitch50 attributes
type of remote access service
type tunnel-group VPN_SSL_Clients remote access
attributes global-tunnel-group VPN_SSL_Clients
address VPN_SSL pool
Group Policy - by default-VPN_SSL
tunnel-group VPN_SSL_Clients webvpn-attributes
enable VPNSSL_GNS3 group-alias
type tunnel-group VPN_SSL remote access
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect esmtp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
: end

XXXX #.

You do not have this configuration:
```
 object network DMZ nat (dmz,outside) static interface
```
Try and take (or delete):
```
 object network DMZ nat (dmz,outside) dynamic interface
```

Cisco Anyconnect VPN client cannot establish a connection.

Hello

I am trying to connect to my server license from the University. I use 'Cisco Anyconnect VPN', but when it is goinh to initialize the connection it gives me the error "unable to establish a connection to the VPN client. At this point, the network of my Cisco anyconnect adapter gets disable automatically.

I have no antivirus, and also it happens even when I turn off my firewall.

Please help me solve this problem that prevents me from my all of the work!

Thank you in advance.

In addition to the advice of John I would also look at this document from Cisco for possible help...

http://www.Cisco.com/image/gif/paws/100597/AnyConnect-VPN-Troubleshooting.PDF

Cisco help as much as possible...

http://www.Cisco.com/en/us/products/ps8411/tsd_products_support_series_home.html

Its also possible you may have to run or reinstall the Cisco client in compatibility mode, if they do not have a version of Windows 7.

http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

Otherwise contact your university network administrators may also be a viable option.

MS - MVP Windows Expert - consumer
"When all else fails try what the captain suggested before you started...". »

Client SSL VPN Cisco or Cisco AnyConnect VPN Client

Hello

Maybe a simple question...

What is the main difference in this two customers?

That's when the AnyConnect Client preferred?

Hope someone can help clearing this out for me.

Best regards

Johan

The SSL VPN client is the legacy client used on the first ASA platforms and VPN concentrator. Customer SVC has since been replaced by AnyConnect. AnyConnect is the client recommended for new deployments ASA and IOS. AnyConnect is also the only client that supports 64-bit operating systems.

Cisco ASA 5505 VPN Site to Site

Hi all

First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..

I'd appreciate any help that can be directed to this problem please. Slowly losing my mind

Please see details below:

Two ADMS are 7.1

IOS

ASA 1

Nadia

:

ASA Version 9.0 (1)

!

hostname PAYBACK

activate the encrypted password of HSMurh79NVmatjY0

volatile xlate deny tcp any4 any4

volatile xlate deny tcp any4 any6

volatile xlate deny tcp any6 any4

volatile xlate deny tcp any6 any6

volatile xlate deny udp any4 any4 eq field

volatile xlate deny udp any4 any6 eq field

volatile xlate deny udp any6 any4 eq field

volatile xlate deny udp any6 any6 eq field

2KFQnbNIdI.2KYOU encrypted passwd

names of

local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

link Trunk Description of SW1

switchport trunk allowed vlan 1,10,20,30,40

switchport trunk vlan 1 native

switchport mode trunk

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

No nameif

no level of security

no ip address

!

interface Vlan2

nameif outside

security-level 0

IP 92.51.193.158 255.255.255.252

!

interface Vlan10

nameif inside

security-level 100

IP 192.168.10.1 255.255.255.0

!

interface Vlan20

nameif servers

security-level 100

address 192.168.20.1 255.255.255.0

!

Vlan30 interface

nameif printers

security-level 100

192.168.30.1 IP address 255.255.255.0

!

interface Vlan40

nameif wireless

security-level 100

192.168.40.1 IP address 255.255.255.0

!

connection line banner welcome to the Payback loyalty systems

boot system Disk0: / asa901 - k8.bin

passive FTP mode

summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS domain-lookup outside

DNS lookup field inside

domain-lookup DNS servers

DNS lookup domain printers

DNS domain-lookup wireless

DNS server-group DefaultDNS

Server name 83.147.160.2

Server name 83.147.160.130

permit same-security-traffic inter-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

ftp_server network object

network of the Internal_Report_Server object

Home 192.168.20.21

Description address internal automated report server

network of the Report_Server object

Home 89.234.126.9

Description of server automated reports

service object RDP

service destination tcp 3389 eq

Description RDP to the server

network of the Host_QA_Server object

Home 89.234.126.10

Description QA host external address

network of the Internal_Host_QA object

Home 192.168.20.22

host of computer virtual Description for QA

network of the Internal_QA_Web_Server object

Home 192.168.20.23

Description Web Server in the QA environment

network of the Web_Server_QA_VM object

Home 89.234.126.11

Server Web Description in the QA environment

service object SQL_Server

destination eq 1433 tcp service

network of the Demo_Server object

Home 89.234.126.12

Description server set up for the product demo

network of the Internal_Demo_Server object

Home 192.168.20.24

Internal description of the demo server IP address

network of the NETWORK_OBJ_192.168.20.0_24 object

subnet 192.168.20.0 255.255.255.0

network of the NETWORK_OBJ_192.168.50.0_26 object

255.255.255.192 subnet 192.168.50.0

network of the NETWORK_OBJ_192.168.0.0_16 object

Subnet 192.168.0.0 255.255.0.0

service object MSSQL

destination eq 1434 tcp service

MSSQL port description

VPN network object

192.168.50.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.50.0_24 object

192.168.50.0 subnet 255.255.255.0

service object TS

tcp destination eq 4400 service

service of the TS_Return object

tcp source eq 4400 service

network of the External_QA_3 object

Home 89.234.126.13

network of the Internal_QA_3 object

Home 192.168.20.25

network of the Dev_WebServer object

Home 192.168.20.27

network of the External_Dev_Web object

Home 89.234.126.14

network of the CIX_Subnet object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.10.0_24 object

192.168.10.0 subnet 255.255.255.0

network of the NETWORK_OBJ_84.39.233.50 object

Home 84.39.233.50

network of the NETWORK_OBJ_92.51.193.158 object

Home 92.51.193.158

network of the NETWORK_OBJ_192.168.100.0_24 object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.1.0_24 object

subnet 192.168.1.0 255.255.255.0

object-group service DM_INLINE_SERVICE_1

the tcp destination eq ftp service object

the purpose of the tcp destination eq netbios-ssn service

the purpose of the tcp destination eq smtp service

service-object TS

the Payback_Internal object-group network

object-network 192.168.10.0 255.255.255.0

object-network 192.168.20.0 255.255.255.0

object-network 192.168.40.0 255.255.255.0

object-group service DM_INLINE_SERVICE_3

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

service-object TS

service-object, object TS_Return

object-group service DM_INLINE_SERVICE_4

service-object RDP

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

object-group service DM_INLINE_SERVICE_5

purpose purpose of the MSSQL service

service-object RDP

service-object TS

object-group Protocol TCPUDP

object-protocol udp

object-tcp protocol

object-group service DM_INLINE_SERVICE_6

service-object TS

service-object, object TS_Return

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

Note to outside_access_in to access list that this rule allows Internet the interal server.

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-list of FTP access

Comment from outside_access_in-RDP access list

Comment from outside_access_in-list of SMTP access

Note to outside_access_in to access list Net Bios

Comment from outside_access_in-SQL access list

Comment from outside_access_in-list to access TS - 4400

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server

access host access-list outside_access_in note rule internal QA

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-HTTP access list

Comment from outside_access_in-RDP access list

outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www

Notice on the outside_access_in of the access-list access to the internal Web server:

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-HTTP access list

Comment from outside_access_in-RDP access list

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server

Note to outside_access_in to access list rule allowing access to the demo server

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-RDP access list

Comment from outside_access_in-list to access MSSQL

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3

Note to outside_access_in access to the development Web server access list

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer

AnyConnect_Client_Local_Print deny any4 any4 ip extended access list

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd

Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631

print the access-list AnyConnect_Client_Local_Print Note Windows port

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100

access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353

AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355

Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137

AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns

Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0

permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0

pager lines 24

Enable logging

information recording console

asdm of logging of information

address record

[email protected] / * /.

the journaling recipient

[email protected] / * /.

level alerts

Outside 1500 MTU

Within 1500 MTU

MTU 1500 servers

MTU 1500 printers

MTU 1500 wireless

no failover

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm-711 - 52.bin

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT (inside, outside) source Dynamics one interface

NAT (wireless, outdoors) source Dynamics one interface

NAT (servers, outside) no matter what source dynamic interface

NAT (servers, external) static source Internal_Report_Server Report_Server

NAT (servers, external) static source Internal_Host_QA Host_QA_Server

NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM

NAT (servers, external) static source Internal_Demo_Server Demo_Server

NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

NAT (servers, external) static source Internal_QA_3 External_QA_3

NAT (servers, external) static source Dev_WebServer External_Dev_Web

NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.10.0 255.255.255.0 inside
http 192.168.40.0 255.255.255.0 wireless
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 84.39.233.50
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 192.168.10.0 255.255.255.0 inside
SSH 192.168.40.0 255.255.255.0 wireless
SSH timeout 5
Console timeout 0

dhcpd 192.168.0.1 dns
dhcpd outside auto_config
!
dhcpd address 192.168.10.21 - 192.168.10.240 inside
dhcpd dns 192.168.20.21 83.147.160.2 interface inside
paybackloyalty.com dhcpd option 15 inside ascii interface
dhcpd allow inside
!
dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
dhcpd update dns of the wireless interface
dhcpd option 15 ascii paybackloyalty.com wireless interface
dhcpd activate wireless
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal Payback_VPN group strategy
attributes of Group Policy Payback_VPN
VPN - 10 concurrent connections
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
attributes of Group Policy DfltGrpPolicy
value of 83.147.160.2 DNS server 83.147.160.130
VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
internal GroupPolicy_84.39.233.50 group strategy
attributes of Group Policy GroupPolicy_84.39.233.50
VPN-tunnel-Protocol ikev1, ikev2
Noelle XB/IpvYaATP.2QYm username encrypted password
Noelle username attributes
VPN-group-policy Payback_VPN
type of remote access service
username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
Éanna attributes username
VPN-group-policy Payback_VPN
type of remote access service
Michael qpbleUqUEchRrgQX of encrypted password username
user name Michael attributes
VPN-group-policy Payback_VPN
type of remote access service
username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
user name Danny attributes
VPN-group-policy Payback_VPN
type of remote access service
Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
user name Aileen attributes
VPN-group-policy Payback_VPN
type of remote access service
Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
Aidan username attributes
VPN-group-policy Payback_VPN
type of remote access service
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
shane.c iqGMoWOnfO6YKXbw encrypted password username
username shane.c attributes
VPN-group-policy Payback_VPN
type of remote access service
Shane uYePLcrFadO9pBZx of encrypted password username
user name Shane attributes
VPN-group-policy Payback_VPN
type of remote access service
username, encrypted James TdYPv1pvld/hPM0d password
user name James attributes
VPN-group-policy Payback_VPN
type of remote access service
Mark yruxpddqfyNb.qFn of encrypted password username
user name brand attributes
type of service admin
username password of Mary XND5FTEiyu1L1zFD encrypted
user name Mary attributes
VPN-group-policy Payback_VPN
type of remote access service
Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
Massimo username attributes
VPN-group-policy Payback_VPN
type of remote access service
type tunnel-group Payback_VPN remote access
attributes global-tunnel-group Payback_VPN
VPN1 address pool
Group Policy - by default-Payback_VPN
IPSec-attributes tunnel-group Payback_VPN
IKEv1 pre-shared-key *.
tunnel-group 84.39.233.50 type ipsec-l2l
tunnel-group 84.39.233.50 General-attributes
Group - default policy - GroupPolicy_84.39.233.50
IPSec-attributes tunnel-group 84.39.233.50
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the pptp
inspect the rsh
inspect the rtsp
inspect the sip
inspect the snmp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect xdmcp
inspect the icmp error
inspect the icmp
!
service-policy-international policy global
192.168.20.21 SMTP server
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1

ASA 2

ASA Version 9.0 (1)

!

Payback-CIX hostname

activate the encrypted password of HSMurh79NVmatjY0

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

Description this port connects to the local network VIRTUAL 100

switchport access vlan 100

!

interface Ethernet0/2

!

interface Ethernet0/3

switchport access vlan 100

!

interface Ethernet0/4

switchport access vlan 100

!

interface Ethernet0/5

switchport access vlan 100

!

interface Ethernet0/6

switchport access vlan 100

!

interface Ethernet0/7

switchport access vlan 100

!

interface Vlan2

nameif outside

security-level 0

IP 84.39.233.50 255.255.255.240

!

interface Vlan100

nameif inside

security-level 100

IP 192.168.100.1 address 255.255.255.0

!

banner welcome to Payback loyalty - CIX connection line

passive FTP mode

summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS domain-lookup outside

DNS lookup field inside

DNS server-group defaultDNS

Name-Server 8.8.8.8

Server name 8.8.4.4

permit same-security-traffic inter-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

network of the host-CIX-1 object

host 192.168.100.2

Description This is the VM server host machine

network object host-External_CIX-1

Home 84.39.233.51

Description This is the external IP address of the server the server VM host

service object RDP

source between 1-65535 destination eq 3389 tcp service

network of the Payback_Office object

Home 92.51.193.158

service object MSQL

destination eq 1433 tcp service

network of the Development_OLTP object

Home 192.168.100.10

Description for Eiresoft VM

network of the External_Development_OLTP object

Home 84.39.233.52

Description This is the external IP address for the virtual machine for Eiresoft

network of the Eiresoft object

Home 146.66.160.70

Contractor s/n description

network of the External_TMC_Web object

Home 84.39.233.53

Description Public address to the TMC Web server

network of the TMC_Webserver object

Home 192.168.100.19

Internal description address TMC Webserver

network of the External_TMC_OLTP object

Home 84.39.233.54

External targets OLTP IP description

network of the TMC_OLTP object

Home 192.168.100.18

description of the interal target IP address

network of the External_OLTP_Failover object

Home 84.39.233.55

IP failover of the OLTP Public description

network of the OLTP_Failover object

Home 192.168.100.60

Server failover OLTP description

network of the servers object

subnet 192.168.20.0 255.255.255.0

being Wired network

192.168.10.0 subnet 255.255.255.0

the subject wireless network

192.168.40.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.100.0_24 object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.10.0_24 object

192.168.10.0 subnet 255.255.255.0

network of the Eiresoft_2nd object

Home 137.117.217.29

Description 2nd Eiresoft IP

network of the Dev_Test_Webserver object

Home 192.168.100.12

Description address internal to the Test Server Web Dev

network of the External_Dev_Test_Webserver object

Home 84.39.233.56

Description This is the PB Dev Test Webserver

network of the NETWORK_OBJ_192.168.1.0_24 object

subnet 192.168.1.0 255.255.255.0

object-group service DM_INLINE_SERVICE_1

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_2

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_3

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_4

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_5

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_6

service-object MSQL

service-object RDP

the Payback_Intrernal object-group network

object-network servers

Wired network-object

wireless network object

object-group service DM_INLINE_SERVICE_7

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_8

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_9

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_10

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_11

service-object RDP

the tcp destination eq ftp service object

outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1

Note to access list OLTP Development Office of recovery outside_access_in

outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group

Comment from outside_access_in-access Eiresoft access list

outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group

Note to outside_access_in access to OLTP for target recovery Office Access list

outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group

Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server

outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group

Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft

outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group

Note to outside_access_in access from the 2nd IP Eiresoft access list

outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group

outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Outside 1500 MTU

Within 1500 MTU

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT (inside, outside) source Dynamics one interface

NAT (inside, outside) static source CIX-host-1 External_CIX-host-1

NAT (inside, outside) static source Development_OLTP External_Development_OLTP

NAT (inside, outside) static source TMC_Webserver External_TMC_Web

NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP

NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover

NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver

NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

the ssh LOCAL console AAA authentication

Enable http server

http 92.51.193.156 255.255.255.252 outside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit

Crypto ipsec ikev2 ipsec-proposal OF

encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 92.51.193.158
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 92.51.193.156 255.255.255.252 outside
SSH timeout 5
Console timeout 0

dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal GroupPolicy_92.51.193.158 group strategy
attributes of Group Policy GroupPolicy_92.51.193.158
VPN-tunnel-Protocol ikev1, ikev2
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
tunnel-group 92.51.193.158 type ipsec-l2l
tunnel-group 92.51.193.158 General-attributes
Group - default policy - GroupPolicy_92.51.193.158
IPSec-attributes tunnel-group 92.51.193.158
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
: end

Hello

There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.

All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.

Here are a few suggestions on what to change

ASA1

Minimal changes

the object of the LAN network

192.168.10.0 subnet 255.255.255.0

being REMOTE-LAN network

255.255.255.0 subnet 192.168.100.0

NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.

Other suggestions

These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.

PAT-SOURCE network object-group

source networks internal PAT Description

object-network 192.168.10.0 255.255.255.0

object-network 192.168.20.0 255.255.255.0

object-network 192.168.40.0 255.255.255.0

NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

No source (indoor, outdoor) nat Dynamics one interface

no nat (wireless, outdoors) source Dynamics one interface

no nat (servers, outside) no matter what source dynamic interface

The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.

Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.

network of the SERVERS object

subnet 192.168.20.0 255.255.255.0

network of the VPN-POOL object

192.168.50.0 subnet 255.255.255.0

NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL

no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

ASA2

Minimal changes

the object of the LAN network

255.255.255.0 subnet 192.168.100.0

being REMOTE-LAN network

192.168.10.0 subnet 255.255.255.0

NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

Finally, we remove the old rule that generated the ASDM.

Other suggestions

PAT-SOURCE network object-group

object-network 192.168.100.0 255.255.255.0

NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

No source (indoor, outdoor) nat Dynamics one interface

The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.

Hope this makes any sense and has helped

Remember to mark a reply as the answer if it answered your question.

Feel free to ask more if necessary

-Jouni

Cisco asa anyconnect vpn client mode issue

Similar Questions

Maybe you are looking for