Anyone running APEX under Max OS?

Similar Questions

• anyone running on CentOS 5 6 WCS?

  I ran into a problem trying to install and run the WCS 6.0.132.0 on a new install of CentOS 5 (2.6.18 - 194.3.1.el5.centos.plus)

  After properly installing WCS by using the option "-DCHECK_OS = false ' I tried to start the service of WCS with the startupscript as root, but got the following error:

  [[email protected]/* */ WCS6.0.132.0]# ./StartWCS
  
      Starting WCS
  
      *********************************
  
      The Server seems to be unavailable. The possible reasons are
  
      1. The server is not running yet.
  
      2. The server is hanging.
  
      3  The server has crashed.
  
      If the server has crashed or is hanging
  
      Please report the issue and follow the instructions to restart it.
  
      1. Run StopWCS to stop all WCS processes.
  
      2. Run StartWCS to start the WCS server.
  
      3. If the server still fails to start, or you still get this
  
         message, then reboot the machine.
  
      *********************************
  
      failed to start WCS on startup Health Monitor
  
      Failed to start WCS.  Check hm_launchout.txt for details.
  
      Log files are located under webnms/logs in the WCS install directory.
  [[email protected]/* */ WCS6.0.132.0]# cat webnms/logs/hm_launchout.txt
  
      JAVA_HOME=./../jre
  
      Starting Health Monitor as a primary
  
      Checking for Port 8082 availability... OK
  
      Starting Health Montior Web Server...
  
      Health Monitor Web Server Started.
  
      Starting Health Monitor Server...
  
      Health Monitor Server Started.
  
      [[email protected]/* */ WCS6.0.132.0]#
  [[email protected]/* */ logs]# cat launchout.txt
  
      Invalid OS version detected, can not start Xvfb.
  
      JAVA_HOME=./../jre
  
      Checking for Port 21 availability... OK
  
      Checking for Port 8456 availability... OK
  
      Checking for Port 8457 availability... OK
  
      Checking for Port 1299 availability... OK
  
      Checking for local Port 1299 availability... OK
  
      Checking for Port 6789 availability... OK
  
      Checking for local Port 6789 availability... OK
  
      Checking for UDP Port 69 availability... OK
  
      Checking for Port 8005 availability... OK
  
      Checking for UDP Port 162 availability... OK
  
      Checking for Port 8009 availability... OK
  
      Starting RMI registry on port 1299
  
      Registry started.
  
      DB is already started
  
      Starting NMS Server...
  

  the only mistake I can interpret is the "can not start Xvfb', but my google thing not performance no results for this question, then:

  Anyone here successfully under this configuration?

  Best regards

  -THE

  PS: I realize that this isn't a supported Cisco OS, but I would try it before falling to RHEL

  Editing/etc/redhat-release should allow WCS start.  I run ours on CentOS 5 and I had to make this change.

  Just comment out the line CentOS and add the following Red Hat line.  You will probably need to be root to do this and

  It may require a reboot.  I also after execution of updates to CentOS note that usually back the file changes

  and WCS does not restart.  I keep a copy of the file on the server's desktop, then copy it on after the updates.

  I have not noticed any problems running on CentOS, just thought I'd throw that out there.

  See you soon!

  Eli

  Release of Red Hat Enterprise Linux Server 5 (Tikanga)

  #CentOS version 5.4 (Final)

• Anyone running HP DL 585 G1 with ESX 4.0?

  Anyone running HP DL 585 G1 with ESX 4.0?

  Yes I know that it is not taken in charge in the HCL. I need for the work of Storage VMotion. Downtime will not accept being the customer.

  If I remember correctly, this model has a processor specification that would not be supported in the latest version of VMware ESX (in this case, ESX 4.0)

  concerning

  Jose Ruelas B

  http://aservir.WordPress.com

• No devices under Max

  Hello again everyone.

  I looked through the other posts and have tried all suggested without a bit of luck. (other that a complete uninstall, re - install)

  I'm forced by my Department to upgrade systems to Windows 7 64-bit and a computer Lenovo ThinkCentre shinny new M series.

  My problem is with MAX v5.0.  I have a PCIe-6351 and a PCI-6052E installed in the system, windows recognizes the card and according to the Device Manager, everything works fine.  The problem is that devices are not appear in MAX under the tree of devices and Interfaces.  I'm refreshing the tree and it is said, it is looking, but he never finds anything.  I used the tools > Reset Configuration option and have nothing done.

  Could there be a security features that are installed that may stop MAX from the voting systems hardware correctly?  Only, I only ask because I was told that some hard enough security practices will be implemented with the new computers, I am about to receive.

  I gained administrative rights and run MAX under an administrator account, but still no luck.

  This is a new installation and I received no errors, everything seemed to install correctly.

  Any ideas how to solve this problem?

  Your help is as always, very much appreciated.

  Steven M.

  Well, my problem is solved. MAX recognizes all my devices and everything works as it should.  The solution is a bit anti-climatic

  The source of the problem was that NEITHER System Web Server (NiApplicationWebServer) service did not, who stopped the mDNS responder service of the race, which, in turn, stopped the service of charger OR to run.

  Try to manually start the MSDN OR system Web Server & National Instruments that service would result in an error 1075, you try to start the device loader neither resulted an error 1068.

  My Department of systems had no ideas on what safety measures or protection of viruses on their end parameters might be the cause of the problem.

  Solution:

  Control Panel > programs > programs and features > National Instruments software > uninstall / change > measure Automation & Explorer > repair.

  After the repair, everything works fine, and all of the above services are running.

  The installation process has shown without errors or problems, so I am at a loss as to why he needed repair.  But whatever it is, problem solved.

  

• Anyone running McAfee LiveSafe please check version.

  I've got 13.6. Version control is out of the home page under everything down right. The version is for the Security Center itself that so-called account. Also if you run CHECK FOR UPDATES (from the right mouse button on the icon on the Systray McAfee) he says that there is an update?

  I'm "stuck" worm. 13.6 and I need 14.0 worm. that was disclosed by McAfee to solve a problem of Thunderbird and this version is also necessary for W10 apparently.

  Supposedly Dell's worm. 14.0 but has not published, at least I can't find it or update it.

  Does anyone have this version?

  It seems OK, it was just updated today...

  

• Help! Problem when running CF under a default service account

  I am running ColdFusion 9 with IIS 7 on Windows Server 2008.

  The CF application service runs under a domain request account rather than the local default.

  The problem is when you are so defective models keep an indefinitely open active query.

  Is it a permission setting, I may be missing to resolve this problem?

  Thanks for any help anyone can provide.

  Charlie, thank you very much for your answer.

  We had only to read/write permissions for the account on the coldfusion9 directory. After changing to full control, the problem has been resolved.  Charlie, thank you very much for your answer.

• Install second connection to the web server at DB 10R2 running Apex 3.0.1.00.08

  All,
  
  I'm trying to add a second web server to move a part of the web traffic to another resource. I have a 3.0.1.00.08 instance that runs on the database connected to the web server and I just wanted to add a second connection to the front-end web server.
  
  The second is web server currently running SOA suite so it was logical financial to simply add another call on this web server.
  
  ServerA (existing web server) to connect successfully to the server b (existing database server).
  ServerC (new web server) to be connected on server b.
  
  Directory copied apex and images ServerC ServerA
  
  TNSNAMES. ORA on ServerC located under ORACLE_HOME\NETWORK\ADMIN
  ORCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ServerB.Address)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORCL)
  (SERVER = DEDICATED)
  )
  )
  
  Server c, I use SQLPLUS to connect to server b using APEX_PUBLIC_USER, correct password, ORCL
  
  Change ORACLE_HOME/Apache/modplsql/conf/dads.conf on ServerC
  
  Alias is ' ORACLE_HTTPSERVER_HOME\Apache\images / '.
  AddType text/xml xbl
  AddType text/x-component htc
  < /plex location >
  Order deny, allow
  Docs PlsqlDocumentPath
  AllowOverride None
  PlsqlErrorStyle DebugStyle
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  PlsqlDatabaseConnectString cn = orcl, cn = oraclecontext NetServiceNameFormat
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  PlsqlAuthenticationMode Basic
  SetHandler pls_handler
  PlsqlDocumentTablename wwv_flow_file_objects$
  PlsqlDatabaseUsername APEX_PUBLIC_USER
  Apex PlsqlDefaultPage
  PlsqlDatabasePassword correct_password
  Allow all the
  < / location >
  
  Restart HTTP_SERVER on ServerC.
  
  I get the error:
  Journal of the database failed
  
  TNS is unable to connect to the destination. Address provided is not a valid TNS or destination is not listening. This error can also occur due to underlying network transport problems.
  
  Ensure that the TNS name in the entry of the DAD for this URL connection string is valid and the listener of the database is running.
  
  ORA-12170: TNS: Connect timeout occurred error-Code: 12170 error TimeStamp: kills, 16 December 2008 20:35:58 GMT
  
  I thought it was weird since it's what worked on the other server and using sqlplus.
  
  I also tried to change the dads.conf file to use the following connection string:
  PlsqlDatabaseConnectString SERVERB:PORT:ORCL ServiceNameFormat
  
  No luck. Why the connection work with SQLPlus and not modplsql? What I am doing wrong? If not, how can I solve this?
  
  Any ideas?
  
  Thank you
  Keith

  Keith:

  Try to use the "SIDFormat" in dads parameter 'PlsqlDatabaseConnectString' instead of 'ServiceNameFormat '.

  CITY

• Anyone running ART?

  I was wondering if someone is running Art vs dalvik If Yes, how are you. I have been putting forward and backward. So far, the Art is significantly faster. It just runs a lot smoother. I noticed battery time on art stand is much better. However I noticed that the battery life is better on dalvik under heavy use.

• nor can 2.7.4 not appearing is not under max remote system OR

  Hello

  I try to install the NI CAN 2.7.4 software for a cRIO thanks MAX.  I checked that I installed module and rio can.  I CAN 2.7.4 installed on the computer, but when I go to MAX to install on the target, it will not be displayed.  Does anyone have experience with this?  Can I even use the NI CAN 2.7.4 with the cRIO?  I keep reading conflicting information.  I have a NI 9853 attached to it, if that makes a difference.

  Thank you.

  You cannot use NICAN with a 9853

• running explore under RunAs is not working now

  I have problems with RunAs works with Explorer.

  RunAs works on system restore and EVENTVWR. MSC under that same account limited but not with Explorer as before. The Explorer window never appears.

  Recently, I ran SFC/scannow and I was wondering if it could it be, and I've also (more recently) used files and Settings Transfer Wizard to override the settings from the desktop only (starting a normal Admin account to this Limited problem).

  I had occasional problems with Explorer recently during the shutdown by saying that so-called Proxy Desktop is still running and must be closed, and I saw an additional Explorer running in the Manager of tasks under a priority high definition, that's why I ran SFC. I recently changed files Configuration does not require loading of folders in a separate process. I have about a week or more of available Restore Points.

  According to EVENTVWR. MSC, I succeed with this RunAs Explorer event #s 680, 528 & 576-based login, but it seems to connect immediately do walk back with event #538.

  All short to delete this account and starting fresh ideas are appreciated.

  Fortunately I found my dose and, boy, I think it's just a little unusual! If you disable 'Windows files to launch in a separate process' you can be is no longer able to open Explorer.exe in a limited account, if you try to do with administrator privileges using RunAs.

  See hxxp://blogs.msdn.com/b/aaron_margosis/archive/2004/07/07/175488.aspx

  As soon as I changed my setting folder options and registry appropriate (as Admin), my RunAs Explorer was back in business. Yee - haa!

• Anyone running Windows (Vista or 7) with a SSD having problems with Windows Update? FIXED *.

  I ask this question because I have now two computers with this problem.

  A computer running Win7 and it used to work with the SSD but recently I wipe the drive and reinstall the OS and now it will not update windows.

  The second computer is a laptop with WinVista final.  This machine, I have improved since a physical hard drive to an SSD a month ago.  This time, he made Windows update without problem.  Now all of a sudden it will also not Windows update.

  A third computer in my house that runs WinVista on a physical drive will be the Windows Update now without any problems.

  So the only link I see is the SSD...

  I replied to your other thread on this issue, but in the case where you'd miss it, I copied and pasted what I wrote here.

  FIXED!

  My laptop is fixed and is installing new updates (I probably Jinx it now and it will come with an error).

  What I did ask the help desk where you chat with a microsoft technician, they take control of remote access from my laptop, and after about an hour of playing around with it (I tried to follow what they were doing - many command prompt and things) they have restarted and said it should be good now. I was very doubtful, because it just shows the same page hanging so thought I would not want to go back and ask them again the next day, but I left it overnight and here this morning there were some updates 208 ready and waiting!

  The technician was really helpful, they offered me paid a pension of microsoft (I think they must do this in standard), but I politely declined and they were wearing on fixing it free in any case for me!

  They gave me a few options also, they said that if they had done did not work, then I could try searching with an ethernet cable (sometimes a more stable connection is all you need) or if it does not, they offered me a newer version of windows 7, which had all updates already downloaded if I wanted to do an OS reinstall everything (I said I prefer not the) do that but it was nice to have the option, if everything else has failed). They also said they would offer phone support for free all the reinstall if I need assistance.

  He also confirmed that they solve this problem a lot and it was certainly not an error at the end of microsoft, or anything to do with the SSD/HDD, etc..

  Overall, really impressed with the service of help desk, I highly recommend asking them if you still need help. Go here: https://support.microsoft.com/en-gb/contactus?wa=wsignin1.0# and click on "services and applications" to open a window where you can chat.

  One thing though, once that my laptop had found all of the updates, I clicked on install and it came with the error message 80240016. I Googled, followed the instructions on this link here: http://windows.microsoft.com/en-gb/windows7/windows-update-error-80240016 and it worked perfectly the second time around.

  Just to confirm, now that I've finished writing this post, my updates have completely installed!

  Hope it will be useful to anyone still hurt!

• I am trying to run on windows 95/98/2000 sierra artist 7 that I managed to run ok under vista as an administrator but the custom of 7 fixes the run even if it seems to be installed ok everything im not too technical ideas

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Let's first try the easy solution.  Click Start, type compatibility in the research field, and click the enter key. This will bring up the resolution of the problems of compatibility of programs.  Click Next and it make a quick check on your machine.  It will ask you to Select the program that you are having problems with, and then click Next.  Click troubleshoot program, then check the box for the program worked in earlier viersions of Windows...  Click Windows 2000 and click on Next. Click on the box for start the program. He will try to open the program as if you were using XP. Once the program is trying to open, click on Next. Now it will ask if it worked for you.  If so, click on Yes, save these settings for this program. If you clicked Yes, every time that you open the program now he opens as if it was running under XP.  That if it worked!

  Sometimes this method does not work.  For these cases, there is a new feature called XP Mode, which will install a virtual machine before you run your program in.  It is not too hard to get set up. It actually installs a copy of Windows XP before you run your program in.   Here's a Microsoft article on how to get it set up: http://www.microsoft.com/windows/virtual-pc/.  XP mode now works even if you do not have the chip installed for hardware-assisted virtualization technology.

  Barbara

• Running Fortran under Windows 7 code produces different results each time.

  I run a FORTRAN code in windows 7 and it produce different results for different courses. Is this a problem of floating point or what? Is there anyone who knows a way to overcome this problem?

  original title: Code Fortran

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the MSDN Windows 7 forum.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• can anyone run this script?

  Hi all

  in order to proceed to a reconfiguration of the alarm, I need to get metricId of an alarm by default,

  the problem is, then from a previous test I accidentally deleted some of these alert, so I have to manually recreate but I can't find the metricId that match.

  So, in order to help me, can someone run this script:

  $Name = "unable to connect to the storage.

  $alarmMgr = get-view AlarmManager

  $alarms = $alarmMgr.GetAlarm ($null)

  $alarms | %{

  $alarm = get-view $_

  If ($alarm.Info.Name - eq $Name) {}

  "Write-Host-object' * $alarm.Info.Name:"-nonewline

  Write to $alarm.Info.Name

  Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric:"-nonewline

  Write $alarm.Info.Expression.Expression [0]. Metric

  Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.CounterId:"-nonewline

  Write $alarm.Info.Expression.Expression [0]. Metric.CounterId

  Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.Instance:"-nonewline

  Write $alarm.Info.Expression.Expression [0]. Metric.Instance

  }

  }

  First of all, as is the case, a second time with $Name = "host error.

  and one last time with $Name = 'high-availability Cluster error. "

  The result of these commands will help me a lot to get my alarm

  Thanks in advance to anyone who can help me

  Here you go (host)

  

  and (cluster HA)

  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Plan the work that runs according to max date in the source to create table

  Hi all
  
  I am trying to create an automation in my sql. Basically, I have a table I do reporting and analysis on which is a subset of records from a source table. For the purposes of this example, I called the source table "src_table" and my table as the target table, "tgt_table." Essentially the source table gets updated with a value again months from date (founded order_dt) and I have a procedure I call when the source table is updated to load the value of the new month of records in my target table. So let say June 2012 data is loaded in the source table, I call my procedure that has a date parameter and enter June 2012 as the point of departure date so that it looks for new records in the source table from June 1, 2012 and load it into my target table. For variety reasons I won't get in, my goal in a position is not a view, there must be a stand alone table. The problem is that the source never table gets updated at the same speed interval... sometimes they will load a new months of data at the beginning of the following month, sometimes medium of the month... sometimes I have to wait a few months to get another month of data. So, whenever I get a email notification telling me another month of data is loaded in the source table, I have a windows batch file that runs my setting... I just have to change the start date (based on the order_dt column) and run it. I want to do is automate the process so that I did not yet do. What do I think creates a task that runs every day or even at the end of each month, this work has basically seized the date of maximum order of the source table and if the date of the order is greater than the maximum order date in my target table, it runs my procedure that loads the new month with a value of data in my target table. Thus, for example, my maximum order of my target table date is May 31, 2012. The work runs at a certain period of time and check the maximum date on the source table, if the maximum date is May 31 nothing happens... new data has not been loaded so does not perform the procedure. If the maximum date on the source table is June 30, 2012, the maximum date is greater than the maximum in my table target date so that the procedure runs. I need also the procedure to insert records into the table in the source where the order date in the source table is > = at the time of maximum order in the target table.
  
  In a Word, this is what I need but I'm not sure how to put in place. The procedure works fine... all I need is an interim procedure that runs as a scheduled task every x number of days and the date of maximum order check on the source table if it exceeds the maximum order on my table of target date it runs my procedure. My procedure is called "insert_new_orders" and when I run it I run it like:
  
  execute insert_new_orders('01-jun-2012');
  
  If anyone can help me with what would be great :-)
  
  Thank you
  Ed

  To start:
  You must remove the EXECUTE keyword.