Anyone running Windows (Vista or 7) with a SSD having problems with Windows Update? FIXED *.

Similar Questions

• Error 0 x 80096001, several errors when trying to install MS VS 2008, Vista SP1 and when you try to run Windows update or Windows Defender.

  Hello. I wanted to run Visual Studio 2010 Express edition on my Vista Home Premium, but ran into way too many problems. First of all, download have not installed because of a problem with the installation of .NET framework v4.0. Then I tried to VS 2008, but has encountered the same problem with the .NET framework. Whenever I try to run Windows update, it displays error Code 80096001 and said "Windows could not check for new updates. So I tried to download .net directly from microsoft downloads, but whenever I try to install it, it says I need to turn on .net "turn on or off windows features", in the control panel. I tried, but the list is completely empty, it shows nothing at all. I downloaded the vista sp1, but it too installation stops with error code 0 x 80096001.
  I tried to disable my anti-virus (avg free). Windows Defender does not initially upward or through subsequent attempts to run it. It shows the same error code. Please advise on how I can solve these problems and use Visual Studio... it's very frustrating because I never had these problems with XP... everything worked.

  Seems like a lot of corruption. Try Windows 7 repair:
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• Vista 64 SP2: when you run windows update, trustedinstaller takes 100% of one of the drivers for more than 20 minutes

  I recently bought a new computer, when I run Windows Update there is a process called TrustedInstaller.exe, taking 100% of one of the cores for a very long time (> 20 minutes).

  I have vista 64 SP2 and all updates installed (took me over 3 days to complete).

  Also, when I try to install additional features of windows (for example. IIS) the same thing happens, trusteinstaller takes 100% of the base and install new features forever.

  I have not installed additional software so far is very little probable that a virus or spyware is the cause. When I'm not updating the an or install features of windows, the computer running quickly and the cpu load is not high at all.

  How long was the computer connected to the internet before you installed Avast?

  Can update you Avast manually?

  The above, see if a reset fixes the problem:

  How to reset the Windows Update components?
  [Access KB971058 Internet Explore 32-bit only; [Throws the difficulty in DEFAULT and AGGRESSIVE modes, and then restart & test]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Anyone running HP DL 585 G1 with ESX 4.0?

  Anyone running HP DL 585 G1 with ESX 4.0?

  Yes I know that it is not taken in charge in the HCL. I need for the work of Storage VMotion. Downtime will not accept being the customer.

  If I remember correctly, this model has a processor specification that would not be supported in the latest version of VMware ESX (in this case, ESX 4.0)

  concerning

  Jose Ruelas B

  http://aservir.WordPress.com

• CANNOT RUN WINDOWS UPDATE ON VISTA

  So I can't update anything on my computer that uses windows update, its been like this for about 3 days now, I tried to figure out how to solve this problem, but I do not receive either where can someone please help?

  Windows Security Essentials gives me the error code 0 x 80004002

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 80072efe when you try to run Windows Update (computers)

  In the last week or so, Windows updates have begun failing on our computers to Vista. Sometimes it will work. If there are no updates, there is no difficulty to install. Error # is always the same. Here is a text of the passage of a WindowsUpdate.log:

  + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://update.microsoft.com/v6/ClientWebService/client.asmx
  WARNING: Send failed with hr = 80072efe.
  WARNING: SendRequest impossible with hr is 80072efe. Used proxy list: <(null)>list workaround used: <(null)>Auth schemes used:<>
  + Proxy last send request failed with hr = 0x80072EFE, = 0 HTTP status code
  + Appellant provided credentials = No
  + Indicators impersonate = 0
  + The possible authorisation schemes used =
  WARNING: SyncUpdates failure, error = 0x80072EFE, the soap client error = 5, error = 0, status = 200 HTTP code soap code
  WARNING: PTError: 0x80072efe
  WARNING: Failed to SyncUpdates_WithRecovery. : 0x80072efe
  WARNING: Synchronization of updates: 0x80072efe
  WARNING: Failed to SyncServerUpdatesInternal: 0x80072efe
  * WARNING: Could not synchronize, error 0x80072EFE is
  * WARNING: Exit Code = 0x80072EFE

  An interesting sidenote, if we try to navigate to update.microsoft.com in a browser, after a long break, we get a banner at the top of Microsoft, and three empty frames all display connection errors.

  We tried different DNS servers, we bypassed the firewall, we tried all possible parameters in the network configuration of PCs, we tried to define the parameters of Internet security at the lowest level possible.
  At this point, I'm fresh out of ideas.

  Any suggestions? Does anyone else have this problem?

  Hi branchranch!
  Step 1: http://support.microsoft.com/kb/971058
  Reset the Windows updates!

  > Step 2: reinstall Windows Update Agent 3.0
  > ===========================
  > 1. Please download the file from the following link:
  > Windows Vista (32-bit)
  > http://download.windowsupdate.com/v7/windowsupdate/redist/standalone/WindowsUpdateAgent30-x86.exe 
  > Windows Vista (64-bit)
  > http://download.windowsupdate.com/v7/windowsupdate/redist/standalone/WindowsUpdateAgent30-x64.exe 
  > 2. Save the file on the D: drive.
  > Note: Please select a drive where Windows Vista was not responsible because the
  > file cannot be launched directly from the root directory of the system.
  > 3. Click Start-> Run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce.
  > (without the quotes) and then press ENTER to install Windows Update
  > engine.
  > Note: there is a space between "D:\WindowsUpdateAgent30-x86.exe" and
  > "/ wuforce.
  > Now, let's run Windows Update again.

  Hope it would work.
  Bravo!

  Anurag Shukla
  Microsoft Certified Professional

• Error 0 x 80096001, several errors during the installation of Visual Studio, or running Windows Update or defender.

  Hello. I wanted to run Visual Studio 2010 Express edition on my Vista Home Premium, but ran into way too many problems. First of all, download have not installed because of a problem with the installation of .NET framework v4.0. Then I tried to VS 2008, but has encountered the same problem with the .NET framework. Whenever I try to run Windows update, it displays error Code 80096001 and said "Windows could not check for new updates. So I tried to download .net directly from microsoft downloads, but whenever I try to install it, it says I need to turn on .net "turn on or off windows features", in the control panel. I tried, but the list is completely empty, it shows nothing at all. I downloaded the vista sp1, but it too installation stops with error code 0 x 80096001.
  I tried to disable my anti-virus (avg free). Windows Defender does not initially upward or through subsequent attempts to run it. It shows the same error code. Please advise on how I can solve these problems and use Visual Studio... it's very frustrating because I never had these problems with XP... everything worked.

  Seems like a lot of corruption. Try Windows 7 repair:
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• 'ERROR 8024200d' this is the error code I get when I try to run Windows update

  code 8024200 D is the error code I get when I try to run Windows update. My Windows Vista computer is SP2 after you install updates.

  I tried installing several times with no luck and end up with the same error code. I have "Microsoft Security Essenial" installed on the PC.

  Thank you

  Hello
  You can follow below link that can help you to solve your problem:
  Windows Update error 8024200d
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
   
  Note: Above the article implies on error 8024200 d.
   

• CODE 80072EFE: cannot run windows update

  I had some problems with my computer Windows Vista - Business Office.  Here are the ones I've noticed so far.

  1. I can't run windows update, I get error code 80072efe when I try.

  2. I get continuous popups.  Not all the time and not every time I have a Web browser open.  Sometimes my browser will open only to Web sites at random, for most of the sites trying to sell me something.  I've just close it before it ends even loading and it will be generally fine for awhile.

  3. on my desk, I'm going to organize my icons where I want that they around my screen (work icons in a spot programs, browsers/email in another, records of files on my second monitor, etc.)  Whenever I restart all my icons automatically group either by date or name, and I have to go through the re-organization.  (This one is obviously not really important but I thought that I list all symptoms).

  4. I tried to do a system restore, my computer has a restore point when you start if you press F11 on the scree of HP (or enter the boot menu by pressing F8 or F5, etc) and it will not allow me to enter this screen.  I can't enter the menu start and any other menu it lists on this screen, but the system restore seems to be disabled in some way.

  I tried to run the scan on windows.live.support (or whatever the site is) and he found a lot of problems and 1 question he couldn't solve, so now I'm stuck.  I tried running malwarebytes scan and it does not pick up any viruses.

  Any suggestions?

  Launch TDsskiller (Rootkit removal tool)

  http://support.kaspersky.com/downloads/utils/tdsskiller.zip.

  After that, restart the computer and check for updates

  And if there is a pop - up use the scanner found at http://safety.live.com

• 8007000e error when trying to run Windows Update

  Separated from this thread.

  Hi - I'm getting the same problem.  Just upgraded from Vista to windows 7 and when try to run windows update, I get 8007000e error.   After you run the convenience store she fixed "registration for the Service is missing or corrupted" and "recent updates installation problems".

  It does not solve "problems installing recent updates"

  Anyone able to advise?  Thank you!! :)

  Start a new thread in the future, rather than ask for help in another thread.

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Reset Windows updates

  Be sure to run the script as administrator.

• Error code 0 x 8024005 when you run Windows update

  After the upgrade to Windows 8, Windows 7, I get this error code when you run Windows Update. "There was a problem of updates"

  Errors found, Code 80242005.

  A bug with a fix?  Where is the difficulty?  I have not yet found an and its been months now... anyone find a fix for this problem in addition to suggestions from Microsoft that don't work?

• How to run Windows update for Win XP SP3 using Firefox

  My desktop PC computer running windows XP with SP3. My spouse uses IE 8 for its browser. I use Firefox Version 24. for my browser. Previously, whenever we ran MS or Windows update it starts IE and works very well. IE 8 blew up and does more (execution errors). I tried to go to the site to update Windows using Firefox and he came back and told me that I had to use IE to launch Win update on an XP system. Is this true? I don't want to use IE at all. Is it possible to use Firefox to run Windows or MS update on my Win XP system? Thank you.

  You cannot run windows update using Firefox because it uses controls ActiveX Firefox is not (and will never). Yes, then unfortunately use IE for Windows update.

• Satellite 1800 - 814 began to disable when you only run Windows update

  I HAVE NOT IT IS AN OLD MACHINE, BUT HE MADE WHAT I NEED 2 DO IT STARTED 2 TURN OFF WHEN I TRY AND DO SOME THINGS WITH HIM LIKE RUNNING WINDOWS UPDATE, DISK CLEANING, DEFRAGING, IT CAN ANY BODY HELP ME HOW SA MAKES ME NUTS

  Hi Chris,

  Sudden power thresholds are usually a sign of overheating. I suggest that you try to clean the radiator of CPU of any accumulation of debris (a hose of vacuum cleaner against the aspiration air grills is a good way).

  Kind regards

• Error 80072EFE when you run Windows Update on Win7 so wireless

  You try to run Windows update on a new laptop from Toshiba with Windows 7 installed and a good wireless connection to a router I get error 80072EFE rather than a list of updates. If I connect directly to the router the updated list comes through fine. I can then unplug the router and download updates more wireless.

  Initially I was running tried to reinstall as 32-bit, 64-bit Win7, but made no difference. Tried to update after I just installed Win7 before Norton and other applications on. Contacted Belkin and they gave me a checklist of the router to do, but not better. Someone at - it ideas? The problem is reproducible even with Norton and other installed applications. If you connect the router updates Windows detects the updates to install. If you work with wireless it gets error 80072EFE.

  Phil

  If I connect directly to the router the updated list comes through fine.

  Until you get your wireless connection problems straightened, run your manually check updates when you are connected to the router.

  See http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet.

  Start a new thread in this forum for further assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft