AP (1140) is configured as a DHCP server, but the user does not get an IP address

Similar Questions

• MAC DHCP Server 2003 Microsoft Works does not after automatic updates...

  Hello

  After Server 2003 updates last night, we are witnessing a ton of problems with Apple products, obtaining DHCP of worked previously, a server.

  Thank you...

  Hello Dale,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the Windows Server 2003 networking and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• How to replace the < root windows > file \system32\ntoskrnl.exe on a system running Windows Server 2003 for Small Business Server when the system does not boot without it?

  I use an old server.  I've been reading that you can fix the file for XP if you have the disc but Server 2003 a 5 disk, that you would use, or would you use even one of them?

  Hi BrianStoll,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope that helps!

• Capacity 1.5 IQ of the DHCP server to the static IP = vCenter fails.

  I have installation capacity IQ 1.5 in our laboratory on vCenter 4.1 U1

  I have deployed the .ovf

  the unit of capacity using DHCP configuration

  Configure the time zone

  Configure passwords (for root and ciqadmin)

  installation via CapacityIQ page, I set the record with vCenter

  I rebooted the client of VIC and the plugin appeared in vCenter and I was able to run reports, etc.

  Then I changed the IP address on the host of the server DHCP to static and it snapped communications to vCenter

  and the plug-in icon disappeared. via the web page of Caron, I was unable to get communication to work again.

  SO, I deleted CapacityIQ unit and redeployed following the same steps.

  Now, when I sign up is said a capacity IQ server is already configured and I can 'force' the

  record, but it still does not work. (it's a little different as the old "ovf" deployment never said anythign about try a 'force')

  Because nothing did not work, I read the manual and tried the console to force registration and "delete."

  using the instructions below:

  I logged in as "ciqadmin" (after finding root did not work)

  
  > register - ciq-admin < IP > vc-server force - user < myID > - < mypassword > passowrd
  > other CIQ is registered in the CR. Unsubscribe it or register with indicator of strength of CLI.

  
  Yet when I try

  
  > unregister the ciq-admin
  > VC already unregistered

  It's like I can't force him, and I can't cancel the registration.

  
  We host VMware vCenter support but when I called they won't help me w / CapacityIQ (which doesn't look good).

  
  No matter which deal with this yet? The thing that I should try?

  Thank you

  Jonathan Reininger

  Hi Jonathan,.

  First, let's make sure that you properly run forced registration. Here is the command line that you typed:

  CIQ-admin check - vc-Server Force - user passowrd -

  It should read as follows:

  CIQ-admin sign up - vc-Server -force - user -password

  Especially pay attention to the two dashes before 'strength', since it is a command line switch. Once you have verified if it works or not, we can dig more deeply if necessary.

  --

  SoC

• Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

  When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  Please give me your entries for this problem.

  Kind regards

  Shankar Kale
  

  Hi Shankar,

  The question you posted would be better suited in the TechNet Forums. See the link.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.

• Disable the DHCP server on the LAN

  Hello

  I'm working on my first range SRP500 router, I used the 800 series since a certain time for installation on these devices seems a bit basic compared the SRP500 have some very attractive features.

  I seem to be faced with a need to 'simple', I want to disable the DHCP server on the VLAN by default, I already have a DHCP server on the network and wish to continue using it.

  Unfortunately it is not an X to delete this profile, how to remove or disable at least.

  Thank you very much

  Gary

  Hi Gary

  In order to disable DHCP, you must log on as an administrator and then go to-> installation interface-> LAN-> VIRTUAL local network settings

  Click the pencil beside the name VLAN to change.

  Now select the address Type "Static IP address"

  Assign an IP address and the default gateway, subnet mask is not necessary that your router will be the one to share Internet access.

  Please try this and let us know if it worked for you.

• Not to get the IP address of the DHCP server on the router

  Hi, I had a problem in the last two days with my internet Setup. I search the Web and a few problems to be 'similar' with solutions that do not work for me.

  I have a PC desktop (Dell 5100) connection to a router Netopia broadband via a cable (Intel Pro/100 VE overcards nic) who does not receive its IP address (192.168.1.x, is that DHCP should be dishing out) since the DHCP service on the router, as it is supposed to. Gets a 169.x.x.x IP address-, in my view, it is a distributed IP address when no DHCP service is. No amount of restarting and reinstalling the cables has helped. I also have an older router which allows to connect via the USB port, who assigns a virtual NETWORK adapter, and that gives me the same result, i.e. 169.x.x.x IP address.

  I also have a wireless connection on the Netopia Router that I can connect to with my laptop with no problems - DHCP address is given correctly and I can access the internet.

  I tried to manually assign an IP address to my office (192.168.1.5) and I am able to ping the router, but I can't http or telnet to the router's GUI or get on the internet.

  I guess the problem is with the office and certain components of the software, but I don't know what. Sorry for this long post, but anyone with ideas.

  Thank you

  Jon

  
  

• New download of vCenter Server Appliance 5.5 does not work?

  I have a client with a small two servers ESX environment into a cluster HA (5.1.0, 799733).  Recently, the 5.1 device they used for management began to have problems and rather than try to solve this problem the plan was to download the new device of 5.5 and just migrate to this.

  A few months ago, I downloaded the device (5.5.0.5100 - 1312297) and deployed.  The deployment takes place without incident, and he fired an IP address from the DHCP server.  However attempts to connect to this device via the web client or the vSphere client failed.  I could connect to the console and it showed started lighttpd but I couldn't always connect.  Play with it, I finally got the web connection works however SSL wouldn't connect to the machine.  After a lot of hacking on I disabled the SSL requirement and could not enter the web management, but by this point I had broken a number of things and was not confident in this system.

  Other questions came, and it has put on hold for a while.  Now, I try again.  I downloaded and deployed a clean machine (5.5.0.5101 - 1398493).  I have deployed it no problem and he pulled a DHCP address, but even when I can't connect to the web server on port 5480.  A glance at the lighttpd configuration file says it's the right port.  Before you start to play and probably break things again once someone has ideas what I might be missing that a device out-of-the-box does not load?

  -Kurt Montgomery

  All comments are my own and do not reflect the views of my employer or clients.

  Cool, and it is not something like a proxy in place? What browser are you trying? Using another browser help?

• Application of the ADF does not work after deployment to weblogic Server (quartz Scheduler is used)

  I created a Web merger Application using Jdeveloper 11.1.1.7. I use quartz Scheduler that will run the application automatically according to a predefined interval.

  The application works perfectly in Jdeveloper and no problem at all. The problem is when the application is deployed on weblogic server.

  Simply, the Scheduler is not rely on weblogic server and the application is not running.

  Any idea what can cause this problem? any idea would be appreciated, thanks in advance

  You should check the server logs in order to understand what happens when you call the Scheduler. There, you will come to know if there is an error message.

  Actually, it's the only way that outside help me to solved the problem. It has nothing to do with the quartz Scheduler , it was question of jdbc where the connection to the application module was not set correctly. Problem solved with application module configuration changed to use instead of the URL JDBC data source

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• Windows Multipoint Server 2011, several stations does not.

  WINDOWS MULTIPOINT SERVER 2011, SEVERAL STATIONS DOES NOT

  I USE WINDOWS MULTIPOINT SERVER 2011, TWO STATIONS OR MORE ARE NOT ABLE TO IMPLEMENT.

  I INSTALLED 20 CAL DEVICE

  HOW TO INSTALL SEVERAL STATIONS? ANY OTHER LICENSE, I NEED AGAIN?

  Help me. .

  CONTACT ME: * address email is removed from the privacy *

  Hello

  Because the problem is with Windows Multipoint Server, I recommend you post this question in the Forums of Windows Server.

• The server of the DNA is not reesponding for the wireless

  The server of the DNA is not reesponding for the wireless which is the steps to solve the problem?

  The server of the DNA is not reesponding for the wireless which is the steps to solve the problem?

  Where do you get your DNS addresses from?   For example, use nslookup or ipconfig/all

  In fact, let's try this:

  for /F "delims =: tokens = 1 *" %i in (' ipconfig/all ^ |) " find "DNS Se" ') do nslookup %j %j

  (Copy and paste that in a cmd window).

  HTH

  Robert Aldwinckle
  ---

• error 0x800ccc78 server does not recognize my email address...

  0x800CCC78 server does not recognize my email address... any help here?

  1. Version of Windows?
  2. E-mail program?
  3. Who is your mail server?
  4. Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread. Just the number of code alone is not enough.
   
   

• \\HOME-server is not accessible. A device attached to the system does not work.

  I use Windows 7 Professional. My network server is WHS V1.

  I have a shortcut on the desktop to \\HOME-SERVER on my W7 machine.
  All of a sudden it has stopped working.
  I get the message
  \\HOME-server is not accessible. You might not...
  A device attached to the system does not work.
  
  
  I searched in the WHS forums, a post suggested http://www.howtonetworking.com/Troubleshooting/notaccessibale0.htm
  I found that the command line net view \\HOME-SEVER gives (and by typing this in an address bar of the Explorer does not work)
  31 system error has occurred.
  A device attached to the system does not work.

  And this net view \\HOME-SERVER\Music gives (but in typing this in a browser address bar works!)
  53 system error has occurred.
  The network path was not found.
  However, net view 192.168.1.99 (my server address) correctly list the share on the server names (and entering \\192.168.1.99 in Explorer address bar works).
  I did a system restore until the problem occurred first to rule out any changes to the system.
  The problem occurred again.
  This means that my Sync Center shows none of my synchronization partnerships.
  Can anyone suggest the setting or service that must be corrected to solve system error 31 problem?
  TIA
  Hello
   
  The question you have posted is related to Windows home server and would be better suited in the Windows Home Server Forum.
  Please visit the below mentioned link to find a community that will provide the support that you have requested.
  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
   
   
  Thank you

• Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist?

  Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist? help someone?

  If it is hosted by GoDaddy, it's maybe out of service. There is a DDoS (denial of Service) attack to GoDaddy for the moment.

  You could try again later and see if it returns.