Not to get the IP address of the DHCP server on the router

Similar Questions

• try to download a program from the disk and get the route can be found in re-indexing re-index research research research service troubleshooting troubleshooting

  I am trying to down load a program from a discus for an automotive tool, that I bought.  Whenever I try to load I get the route cannot be found. I loaded other programs without any problems.  It will say get a folder with her inside whichI find but it says that the file does not exsist.

  Hello

  1. what operating system are you using on your computer?

  2. what program you want to download?

  3. have you made changes on the computer before this problem?

  See the methods mentioned below.

  Method 1: Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2: Put the computer in a clean boot state and check to see if the problem persists. Follow the steps mentioned in the article below
  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Answer comes back with more information so that we can better help you.

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• While trying to install a Linksys E1500 he repeats that my computer is not connected to the router.

  Computer problems and the router

  I have a windows xp 2002 with service Pack 3. While trying to install a Linksys E1500 he repeats that my computer is not connected to the router. Ive tried a new cable and it does not solve the problem. He also said that my computer does not have wireless capabilities. Any suggestions?

  You'll be much more likely to get useful (or even possible) suggestions if you provide the full text of the error messages you get, without paraphrasing.

  For example:

  He repeated to me that my computer is not connected to the router. --> What is the real error message?

  He also said that my computer lacks wireless capabilities--> what is the error message itself?

  You are "trying to connect via a cable" to the router or you're talking about your Internet service (for example, the router is connected to the Internet via a cable)?

  You think that your computer has "wireless capabilities?  Open the Device Manager (start > run > devmgmt.msc > OK), then click on the + sign next to "network adapters."  Please provide the names of any devices listed there.

  Is your computer without a name, a laptop?  There a name of brand anywhere (for example, Toshiba, HP, Dell, etc.)?

  Open System Properties (start > run > msinfo32 > OK)
  Click Edit > select all
  Click Edit > copy
  Right-click in your response here and select Paste
  Be sure to hide the "System name" or "User Name" if it makes you feel better, but please do not remove anything else.

• 15 - r074TU: laptop does not connect to the router

  Day sum... .my laptop (model No. 15r074TU) with window 8.1 does not connect to the router that is D-link

  I uninstalled my driver reinstalled again, but it didn't work... even if I formatted my laptop, reconfigure the router and... done with all possible measures to overcome this problem, but have ultimately failed. Please suggest ways to tackle this problem as soon as possible...

  Follow the wizards in the following forum sticky and troubleshooting.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/common-fixes-for-wireless-connectivity-issues/m-p/4831601#M86871

• Windows Update, not loading, getting the error "the website has encountered a problem and cannot display the page you are trying to display."

  I just did a fresh install of win xp and impossible to get the update of windows to work. I get this message: the site has encountered a problem and cannot display the page you are trying to view.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• XPS 9000 froze and restart does not start - get the cursor flashing, top left of the screen

  System was working normally and after some time froze - no mouse movement, clock does not move, etc.

  Did a stop down with the power button (hold down 10 sec +) to stop.

  On switching on, does not pass through the boot sequence.  F2 does nothing and the only sigh of 'life' is a blinking cursor, upper left corner of the screen.  Tried to close - turn several times with the same result.

  I suspect a motherboard problem because there is no start. Don't know any other tricks to try to resuscitate the box.

  Does anyone have experience/solution for this type of problem?

  WGR,

  As there is no "beeps", I guess as a failed motherboard.

  Try the following, if you are comfortable working around computers:

  Note: The only 100% POWER supply test method, is to install a known working power.
  
  Unplug the power cord, hold the power button in for about 15-20 seconds, open the case, disconnect the power connector 24-pin motherboard and jumping the Green wire to one of the black wires, plug in the power cord and the power of the system, if food and case fans and disk hard drive performance then the power supply should be good.

  Note: Do not remove the wires from the plug, use a small piece of wire or a paper clip as a rider.

  Excerpt from power supply, again, unplug the power cord, hold the power button again for 15/20 seconds to discharge residual power, reconnect the connector 24 pin to the motherboard.
  Remove all the computer PCI cards, remove the video card [as appropriate], disconnect all devices, except the monitor, mouse and keyboard and unplug cable power & data of all readers.
     
  Reconnect the power cord and power the system on, see if you get something different from the LED on the power button, or any 'beeps '.

  No difference, remove the system memory and try again.

  Still shows no signs of life while looking at a motherboard replacement & maybe a processor.

  Note: The good news is, processors lack rarely, being the only method I know to check a processor, install a compatible work PC, or use a known job processing.

  Unfortunately the Dell OEM XPS 9000 renovated/new motherboards are not cheap.
       
  Bev.

• How to set vm-description/notes and get the name of the data store, where the virtual machine

  Hello guys,.
  I have vCenter Orchestrator 4.1.1 build 733 installed and it works fine, but I need your help for the following two issues:
  (1) I want to put the description/notes of a virtual machine using a workflow. But I have not found any API useful to create this workflow (I don't want custom attributes, see attachment for details).

  (2) how can I get the name of the data store, where the virtual machine? I need this name for a workflow.
  I need your help.
  Thanks in advance!

  With regard to the notes of the VM, the following code (see enclosed package) can do this:

  var oldNotes = vm.summary.config.annotation;
  If (oldNotes == null) {oldNotes = ' ' ;}}
  System.log ("Notes of VM current:" + oldNotes);
  Now put the new notes:
  Start by creating a context
  Context of var = new VcVirtualMachineConfigSpec();
  Update the annotation with the new value property
  configSpec.annotation = notes;
  launch the task to reconfigure the virtual machine with the new context
  NOTE: This is sure to apply with a virtual machine under tension
  var task = vm.reconfigVM_Task (configSpec);

  And, in what concerns the VM information, take a look at the workflow of the library: \Library\vCenter\Virtual Machine management\Others\Extract virtual machine information

• I have a HP officejet K-550dtn. New wireless n router. I can't get the router to see the printer.

  This printer used to work properly as a network using Actiontec or Linksys printer b/g router.  I upgraded my network for a 802.11n system and I cannot get the new router to see the printer.  After several hours of fighting, I find that the printer configuration page shows its IP address as 192.168.1.103.  Unfortunately, the DHCP server on the new router uses address 192.168.0.100 - 192.168.0.200 only.

  The disc that came with the printer does not work in one of my computers, because the BONE is newer than Win XP.

  Any ideas on how I can change the internal IP address of the printer to something the router will recognize?

  I wouldn't get rid of this printer, since it is always does a great job.

  (I can still print to the printer with a computer server network address to which it is connected by a USB cable, but requiring everyone goes up to this computer before making the print command in order to ensure that it is not hibernation.)  If I can't print directly via the router, I think I will return the router and go slowly until I can't take it anymore.

  Thank you

  Dweezel

  I finally understood that.  Here's how, in case someone else meets this.

  I don't mention that there is a Verizon FIOS router behind the wireless-n router, and it uses the model of 192.168.1.XXX.

  On a hunch, I ping the FIOS router, and there was a response.  The K-550 ethernet cable was plugged into the wireless n router and I tried it ping 192.168.1.103.  No response.  I then connected the ethernet printer cable in one of the connectors of the FIOS router replacement.  He ping again and got 4 beautiful quick returns.

  I moved to one of the computers on the wireless network and checked to see if the printer was there.  Joy!  There were two cases.  One was the connection recently configured via the USB port on the server computer.  The second was through the previously used x.x.x.103 port.  I can print using this forum, and I made it the default printer.

  It had not occurred to me to use a port across the wireless n router.

  Dweezel

• No Wireless Connection and can not only change the router

  I have messed around with my router configuration to try to make my NAt type open and somehow messed up the Internet. I set kind of it and now I can connect to the internet if I connect directly to the router but I can't always have a wireless connection and I also can't change the router setting more? I followed the steps back to get my ip address and it used to be 192.168.1.1, but now his 192.168.1.2 I don't know what I please help.

  Hi estesblake,

  (1) do you get an error message when you try to access wireless internet?

  (2) what is the number of brand and model of your router?

  Follow the steps outlined in the article below to fix the problem of wireless network connection

  Wireless network connection problems in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab02

  Regarding router problem check the documentation that came with the device or contact the manufacturer of the device.

• Laptop with Windows 7 does not connect with the router

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  Hi Roger,

  We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?

  You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.

  Let us know how it goes.

• Satellite L350 - is not connect to the router

  I had a problem with the radio on my Satellite L350. Even if the router is right next to the computer, it is not for her. It can see if I do a search but only says: connection not available. I have 2 other computers works great on the router. The router is a Netgear.

  Any body can help?

  Hello

  What should I say now? First attempt to update the WLAN driver that you find on the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Also, check the TCP/IP settings of the wireless network card. If your router supports DHCP, check if this option is enabled. Also make sure that the DHCP client and DNS work properly.

  You use a firewall? If so try turning it off. Maybe it s blocking of the Internet connection.

  By the way: what OS do you have?

• My hp c4500 Wireless will not print. Troubleshooting says my printer is not communicating with the router.

  MY hp c4500 wireless printer will not print. Troubleshooting says my printer is not communicating with the wireless router. I've checked everything. Unable to find the answer.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I lost my router user name and the password and reset does not have without the router

  I haven't used my router wireless of Linksys WRT54G v5 for about 1 1/2 years and he needs now to a new place.

  I put a username and password I forgot for a long time for access to the web according to the security protocols for the modem and I lost the disc for the program control protocol.

  I tried pressing the reset button to clear the modem and it took the WPA Protocol off the power to the modem, so I can use it without any security, but this isn't a good thing.

  Help! How do unlock it so I can get to the security protocols and put back the security on my modem?

  StephanieD wrote:

  I haven't used my router wireless of Linksys WRT54G v5 for about 1 1/2 years and he needs now to a new place.

  I put a username and password I forgot for a long time for access to the web according to the security protocols for the modem and I lost the disc for the program control protocol.

  I tried pressing the reset button to clear the modem and it took the WPA Protocol off the power to the modem, so I can use it without any security, but this isn't a good thing.

  Help! How do unlock it so I can get to the security protocols and put back the security on my modem?

  To release your router to your previous settings.

  RESET the router the button is @ the back of it.

  Connect a computer to one of the ports numbered on the router.

  Access the UI of it http://192.168.1.1

  User name: (BLANK)

  Password: admin (all lower case)

  

• Dell Latitude D620 will not connect to the router

  The network is available in the preferred networks list, but it will not conntect to him. The network also does not appear in the "wireless networks in Range.

  I have to install some kind of driver?

  Message edited by EmmaBrown on 10/29/2008 12:11