Apex listener start with port 8080

Similar Questions

• Company that multiple instances cannot start with port set to 80

  I have three instances: main forum is for cfadmin site, then, two are my websites.

  cfusion-> site cfadmin - port http < white - > remote port 8014 - host localhost - cluster no

  cfusion2-> site 1 - port 80 - remote port 8012 http - host localhost - cluster no

  cfusion3-> 2 - port 8501 http site - remote port 8011 - host localhost - cluster no

  cfusion2 does not start and the instance Manager page refreshes just without message, and there is no log system or cf with errors. I use the Chrome browser, I gave up on Internet Explorer (event after adding the sites to the safe zone).

  I then configure the third-party site using WSCONFIG in the hope that it will use cfusion3 server but on the contrary it is selected automatically cfusion.

  I could really use some help here. Thanks in advance.

  Well, I received my case running and each with its own windows service. More I don't get the blank page of death, and I did not manually change the configuration files in order to make this work.

  When CF instances are created, it creates a copy of the file cfusion for himself. and so in itself, there's also a runtime/bin folder that contains the WSCONFIG tool. So rather than create a CF Connector for my IIS sites using the main cfusion WSCONFIG tool I had use every tool within each instance. Many of you probably already knew that.

  It was recommended by Anit Kumar to activate the embedded server so that port 8500 is busy before creating instances so that the newly created instances do not automatically pick up port 8500.

  Thanks to Alexis who helped every step of the way and that got my server correctly setup.

  For anyone doing a new installation on windows server, be sure to run the installer with administrator rights. In addition, make sure that your cf installation folder has the appropriate permissions. Initially, I gave everyone full control of my installation folder, then after its installation and work I started to follow the recommendations of Peter CF 11 Lockdown Guide permissions. follow http://www.Adobe.com/content/dam/Adobe/en/products/ColdFusion/PDFs/cf11/cf11-Lockdown-GUID

  Adobe CF, could you guys add some stuff and how simple instructions on the page instance in CF Administrator Manager? He must know that bodies have their own WSCONFIG tool and should be used for the planned sites. Also, I think that additional instances should start with port 8501, 8500 should be left alone for the integrated server option. This could avoid installation problems. Oooh, also if possible in the instance Manager add an action button that opens its own WSCONFIG tool. Action can be called "add a website".

• Apex Listener SSL on Port 8181 use Glassfish

  Hello experts!
  
  I have deployed the listener apex 1.1.3 on my glassfish server and the listener is running on port 8080 (http-listener-1).
  My question is how can I configure the server Glassfish uses http-listener-2 (port 8181 and SSL enabled) instead?
  
  Searched for hours to find some info but could not find an answer s.
  
  Any help is appreciated!
  
  Thank you
  
  Sebastian

  Hello

  This is not really related to the listener of the Apex, it is more a question General glassfish.
  When you say instead, you realize that you can have glassfish listen on multiple ports, secure or not?
  It's not one or the other situation.

  If you go to http://: 8181 you will access the same application as you would on port 8080.

  This blog goes into details on how to configure HTTPs on a listening port of glassfish for the network:
  [http://javadude.wordpress.com/2010/04/06/getting-started-with-glassfish-v3-and-ssl]

  Published by: on February 13, 2012 mwrf 04:38

• How do you change the port number for Apex listener V2?

  I run listener Apex V2 in stand-alone mode on Linux.  I want to change the port number of the listener apex V2 (e.g. 80 to 8080).  How I do that without having to re - install the new listener?

  Thanks in advance

  PaulP

  Hi PPlatt,

  You can change your_listener_home_directory/apex/apex.properties

  http.port = 8080

  Stop & restart receiver.

  HTH

  Zack

• SSL &amp; apex listener

  Hi all
  
  I'm not much of a webmaster so just for the want to wrap your head around things. I've got APEX Listener installed with Tomcat 7. SSL must be configured Tomcat level or layer of the listener.
  
  Also, I see a lot of Glassfish. I guess it's the big enterprise server for extra support Java EE and "sustained", because I don't see how a small business could allow 5K a processor. But for a small company, Tomcat is an alternative appropriate for small businesses?
  
  Sincerely
  
  Jan S.

  Hello Jan,

  SSL must be configured Tomcat level or layer of the listener.

  SSL is the part of your Tomcat configuration. If you already have an Apache HTTP with SSL server in your farm, you may also set up to act as a reverse proxy and let the work of Tomcat without SSL. The connection would be so

  Client (HTTPS) ==> (HTTPS) Proxy (HTTP/AJP) ==> (HTTP/AJP) Tomcat
  

  Also, I see a lot of Glassfish. I guess it's the big enterprise server for extra support Java EE and "sustained", because I don't see how a small business could allow 5K a processor.

  I get your point for the 5K, but GlassFish is in fact the smallest support JEE container and considered a kind of "light weight", also for small businesses. WebLogic is much more expensive...

  But for a small company, Tomcat is an alternative appropriate for small businesses?

  If you do not need official support for your business, you'll be fine with Tomcat.

  -Udo

• Apex listener 1.1.3 - I set up port 8080, but now I want to change

  Hi experts.
  I have configured the listener of the apex to port 8080 successfully, but now I want to change that, as well as the first question below.
  
  
  1 - the apex listener can be started via a script?
  2. how to change the port 8080 of the auditor of the apex?
  I saw this, but I don't ' know if Dapex.home's home foleder apex earpiece or nt.
  
  Java-Dapex.home=/tmp/apex-Dapex.images=/usr/local/apex/images
  -Dapex.port = 8585 - Dapex.erase - jar < temp folder > apex.war

  Hi user12055481,

  1 - the apex listener can be started via a script?

  Of course, if you want to use offline, it's basically the same call that you type when you start it manually. You can use nohup or a similar tool to run it in the background.

  2. how to change the port 8080 of the auditor of the apex?
  I saw this, but I don't ' know if Dapex.home's home foleder apex earpiece or nt.
  Java-Dapex.home=/tmp/apex-Dapex.images=/usr/local/apex/images
  -Dapex.port = 8585 - Dapex.erase - jar apex.war

  You can see the [url http://download.oracle.com/otn/java/appexpress/1.1/docs/AELIG/E21058_01.pdf] APEX listener Installation and developer for documentation Guide full of all possible parameters...
  One for the port is (obviously) apex.port . You need not provide the others if you want to just change the port. However, especially when you intend to use it in stand-alone Mode longer and use run script in function, it makes sense to use a home set (instead of your temp users) to store configuration and execution ( apex.home ) data and provide a certain destination for static content ("images") for APEX ( apex.images ) - especially important if you plan to use the APEX earpiece with different instances of APEX with different versions of the APEX. apex. Erase must be handled with care, as you will need to reconfigure the listener of the APEX, every time that you restart it. If you are considering a startup based on the script, you can do this as an option and to be used only when you want the listener to be reconfigured.

  I hope that answers your questions. If this isn't the case, feel free to ask for more details.

  -Udo

• Apex listening port Configuration problem.

  Hello
  
  I wanted to try the latest Restful services in apex 4.2, I decided to install 2.0 listener Apex. I downloaded the file and followed the steps in the installation notes. As a sine qua non, I configured Restful services with success in the apex 4.2 with Oracle 11 g Express Edition. However, the installation of listener seems to be not correctly complete the following installation feed back.

  D:\software\apex_listener>java -jar apex.war
  This Listener instance has not yet been configured.
  Please complete the following prompts
  
  Enter the location to store configuration data:d:\apexlistnerconf
  Dec 27, 2012 3:34:47 PM oracle.dbtools.common.config.cmds.ConfigDir execute
  INFO: Set config.dir to d:\apexlistnerconf in: D:\software\apex_listener\apex.war
  Dec 27, 2012 3:34:49 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
  INFO: Using configuration folder: D:\apexlistnerconf\apex
  Enter the name of the database server [localhost]:
  Enter the database listen port [1521]:
  Enter 1 to specify the database service name, or 2 to specify the database SID [1]:2
  Enter the database SID [xe]:
  Enter the database user name [APEX_PUBLIC_USER]:
  Enter the database password for APEX_PUBLIC_USER:
  Password must not be empty
  Enter the database password for APEX_PUBLIC_USER:
  Confirm password:
  Enter 1 to enter passwords for the RESTful Services database users (APEX_LISTENER,APEX_REST_PUBLIC_USER), 2 to use the same password as used for APEX_PUBLIC_USER or, 3 to skip this step [1]:3
  Dec 27, 2012 3:37:03 PM oracle.dbtools.common.config.file.ConfigurationFiles update
  INFO: Updated configurations: defaults, apex
  Enter 1 if you wish to start in standalone mode or 2 to exit [1]:
  Enter the APEX static resources location or Enter to skip:D:\software\apex42en\apex\images
  Enter the HTTP port [8080]:
  Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Standalone execute
  INFO: NOTE:
  
  Standalone mode is designed for use in development and test environments. It isnot supported for use in production environments.
  
  Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Standalone execute
  INFO: Starting standalone Web Container in:  d:\apexlistnerconf\apex
  Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Deployer deploy
  INFO: Will deploy application path = d:\apexlistnerconf\apex\apex\WEB-INF\web.xml
  Dec 27, 2012 3:41:17 PM oracle.dbtools.standalone.Deployer deploy
  INFO: Deployed application path = d:\apexlistnerconf\apex\apex\WEB-INF\web.xml
  Dec 27, 2012 3:41:18 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
  INFO: Using configuration folder: D:\apexlistnerconf\apex
  Default Database connection not configured properly
  Dec 27, 2012 3:41:20 PM oracle.dbtools.rt.web.SCListener contextInitialized
  INFO: Oracle Application Express Listener initialized
  Application Express Listener version : 2.0.0.354.17.06
  Application Express Listener server info: Grizzly/1.9.49
  
  Dec 27, 2012 3:41:20 PM com.sun.grizzly.Controller logVersion
  INFO: GRIZZLY0001: Starting Grizzly Framework 1.9.49 - 12/27/12 3:41 PM
  Dec 27, 2012 3:41:20 PM com.sun.grizzly.SelectorHandlerRunner handleSelectException
  SEVERE: doSelect IOException
  java.net.BindException: No free port within range: 8080=com.sun.grizzly.http.SelectorThreadHandler@480d41f3
          at com.sun.grizzly.TCPSelectorHandler.initSelector(TCPSelectorHandler.java:432)
          at com.sun.grizzly.TCPSelectorHandler.preSelect(TCPSelectorHandler.java:378)
          at com.sun.grizzly.SelectorHandlerRunner.doSelect(SelectorHandlerRunner.java:188)
          at com.sun.grizzly.SelectorHandlerRunner.run(SelectorHandlerRunner.java:132)
          at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
          at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
          at java.lang.Thread.run(Unknown Source)
  Dec 27, 2012 3:41:20 PM com.sun.grizzly.http.SelectorThread$3 onException
  SEVERE: Exception during starting the controller
  java.net.BindException: No free port within range: 8080=com.sun.grizzly.http.SelectorThreadHandler@480d41f3
          at com.sun.grizzly.TCPSelectorHandler.initSelector(TCPSelectorHandler.java:432)
          at com.sun.grizzly.TCPSelectorHandler.preSelect(TCPSelectorHandler.java:378)
          at com.sun.grizzly.SelectorHandlerRunner.doSelect(SelectorHandlerRunner.java:188)
          at com.sun.grizzly.SelectorHandlerRunner.run(SelectorHandlerRunner.java:132)
          at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
          at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
          at java.lang.Thread.run(Unknown Source)
  java.net.BindException: No free port within range: 8080=com.sun.grizzly.http.SelectorThreadHandler@480d41f3
          at com.sun.grizzly.TCPSelectorHandler.initSelector(TCPSelectorHandler.java:432)
          at com.sun.grizzly.TCPSelectorHandler.preSelect(TCPSelectorHandler.java:378)
          at com.sun.grizzly.SelectorHandlerRunner.doSelect(SelectorHandlerRunner.java:188)
          at com.sun.grizzly.SelectorHandlerRunner.run(SelectorHandlerRunner.java:132)
          at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
          at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
          at java.lang.Thread.run(Unknown Source)
  Dec 27, 2012 3:41:20 PM oracle.dbtools.standalone.Standalone execute
  INFO: http://localhost:8080/apex started.

  Simply, it crashes in the last line, and I couldn't make any progress.
  
  Can you please help to find out what was wrong?
  
  Thanks in advance.
  
  Kind regards
  
  Natarajan

  Hello

  I updated the apex listener port 8080 and it does not give this error now.

  However, he always says "Database connection by default not configured correctly"

  I gave the name of SID as xe, which is the default value and that the correct SID for my DB also.
  >

  SID = xe is correct since you are using 11g XE.

  What is more important, is that you may be able to access the Apex Application Builder via the ApexListener or not.
  If Apex is not accessible, then the thing to check would be the Apex_Public_user password. Can you connect to XE using Apex_Public_user with the password that you provided when setting up the ApexListener?
  Also make sure the Apex_Public_user and 2 other users ApexListener 2.0EA, are UNLOCKED.

  See you soon,.

• Web server and the apex running on the same machine - possible conflict port 8080

  Hi guys,.
  
  I installed Apache Tomcat and currently in the process of installing Oracle 11 G in the same machine.
  
  The tomcat uses port 8080 and I understand other installs, the APEX uses 8080 as well.
  
  Is there way after installing Oracle 11 G database XE, stop APEX so it is not in conflict with the use of 8080 Tomcat? I have no use for APEX at this point you want to stop if possible.
  
  Alternatively, it can be configured to use a different port?
  
  Thank you very much.

  You can do either, stop it or change the port. So sad that you said that you «have no use for Apex...» ».  :(

  What gateway do you use for Apex? What is the EPG, OSH or the listener of the Apex? If you use the EPG, there is an order any structure/API for it. Here are a couple that you can run a SQLPlus session:

  SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
  
  EXEC DBMS_XDB.SETHTTPPORT(port);
  For example:
  
  EXEC DBMS_XDB.SETHTTPPORT(8080);
  
  OR
  
  EXEC DBMS_XDB.SETHTTPPORT(8181);
  

  If you use OSH then you go to your OHS/Apache Directory and find the path to the OPM and issue commands to start where your stop. If it's the listener of the Apex with Glassfish, then you go to the console of administration of Glassfish and stop your deployment of Apex from there. I'll leave you the specifications.

  Earl

• Problem using a folder next to the East on UNIX Ubuntu 10.4 with APEX listener

  Hi Forum,
  
  We have APEX 4.1 installed on Ubuntu 10.4 with the latest version of the APEX-listener.
  
  We want to achieve is that we are able to collect our Javascript extensions and css next to the folder is in a folder of our own.
  Problem now is UNIX, this doesn't seem to be possible, because we are unable to load any resource of this folder. The only solution we could come up with is to place a symbolic link in the/i/folder-pointing to the directory we want to include.
  The folder we want to include got 777 to exclude any potential problems of access to in UNIX
  
  Under Windows, this doesn't seem to be the case.
  
  If someone had a similar problem or is able to give advice on how to fix this?
  
  Thank you
  
  Jürgen

  Hi Jürgen,

  docroot
  -foo
  -J' I

  This does not work in stand-alone mode, the integrated nature fixed contexts (including + / i + and + / apex +) without the chance to bring custom contexts.
  It will run in GlassFish/Tomcat, if you deploy content correctly. You can do this by creating a war file that carries your files, but I wouldn't recommend it has static content more convenient ways.
  Tomcat has for example a context ROOT when running on a default configuration. This context can be used for static content similar to a simple HTTP server host, for example when using the htdocs of the Apache HTTP server as docroot. So you could simply copy your directory foo in the context of the ROOT and should be able to access the content using http://yourtomcathost:yourtomcatport/foo/file name .
  GlassFish is a concept similar to this: each domain has a docroot directory. As explained for Tomcat, you can simply create or copy your directory foo it so that it is available for your customers.

  If this does not work, you have a general problem with your GlassFish/Tomcat configuration, like the docroot has nothing to do with the earpiece of the APEX. I have just retestet with fees GlassFish/Tomcat on Ubuntu 8.04 LTS (Server Edition) as follows:
  1 download the http://glassfish.java.net/ zip or Tomcat mirror packages respectively.
  2 unzip the package
  3. create the directory 'foo' docroot (for GlassFish) and ROOT (for Tomcat)
  4. create the file 'bar' in 'foo '.
  5. start the server instance
  6 use a client remote access http://mybox:8080/foo/bar.txt and got the file.

  How did you install your GlassFish/Tomcat on your Ubuntu?
  Whatever it is, if you tried the docroot/ROOT approach and doesn't, you can always try the war file deployment. Maybe your GlassFish/Tomcat instance has disabled the docroot/ROOT context for security reasons.

  Note that you can have both, that is, you cannot use the war with framework file + / foo + and have always a + / foo + subdirectory in your docroot/ROOT.

  -Udo

• APEX 5.01 ADR 3.0.1 error 404 not found ordsapex_admin. All the steps done installations, ADR started with SQLDeveloper.

  Newbie, Dan:

  Chrome after http://localhost: 8080/apex/apex_admin "error HTTP 404 problem access/ordsapex_admin. reason: not found".

  Installation steps:

  APEX 5.0.1.00.06

  @apxrtins.sql SYSAUX SYSAUX TEMP/i /;

  @apxchpwd.sql;

  ALTER USER APEX_050000, FLOWS_FILES, APEX_PUBLIC_USER UNLOCK and pass

  EXEC DBMS_XDB. SETHTTPPORT (0);

  Hi adamar,.

  Adamar wrote:

  Chrome after http://localhost: 8080/apex/apex_admin "error HTTP 404 problem access/ordsapex_admin. reason: not found".

  Installation steps:

  APEX 5.0.1.00.06

  @apxrtins.sql SYSAUX SYSAUX TEMP/i /;

  First of all what you have installed 'Runtime Environment' for Oracle APEX 5.0 and 'Runtime Environment' has no GUI as in "Development Environment". 'Runtime environment' has GUI access only for applications deployed in it.

  Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/overview.htm#HTMIG366

  You need to convert "Runtime Environment" to "Development Environment".

  Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/listener.htm#HTMIG29457

  Are you using the correct installation procedure Oracle APEX and configuration ADR?

  Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/listener.htm#HTMIG29143

  Second thing : when you use Oracle REST Data Services like Web listener option, there is no /apex but /ords. So, your connection APEX links will be:

  • http://localhost: 8080/ADR / (APEX development)
  • http://localhost: 8080/ADR/apex_admin (APEX Instance Administration)

  Third thing : on 404 - when setting up ADR 3.0 have you skipped configuration "PL/SQL gateway '? (This step refers to the configuration of Oracle APEX with ADR (APEX_PUBLIC_USER configuration) which is required for the operation of Oracle APEX with ADR)?

  Otherwise, you will run into the following error message:

  • Re: Re: ADR 3 404 error
  • Re: problem with ADR 3.0

  Also open your "ords.3.0.1.177.18.02" folder and run the "readme.html" file in a browser and go to the section "404 errors when Oracle configuration REMAINS Data Services" on the causes of 404.

  Finally , go through the following threads on the Oracle APEX installation and configuration ADR where talked to errors of detail in the course of setting up ADR and the means to solve them:

  • Installation of ADR after 5 APEX
  • Can't 5 Apex to work...

  Kind regards

  Kiran

• Please help get started with apex

  Hi Experts...
  
  I just downloaded database XE 11.2 and installed on windows xp x 86.
  
  I want to learn APEX, so what I need is that you tell me how to start, I search some forums but I can't find a good sign.
  
  I need to create a small database table 3 (I know not how... with Toad)
  
  but then what?
  APEX is installed? or I need to run any script?
  
  I can reach http://127.0.0.1:8080 / apex, I see a link 'start with oracle application Express' but it is where I don't know what to do with the creation of the workspace...
  
  I'd appreciate any help really.
  
  Thanks in advance.

  The "Oracle Database 2 day + Application Express Developer's Guide" is often a good starting point.

• Oracle 10g homepage not opening not... Oracle DB not listening to port 8080.

  I installed oracle 11g xe and home page did not come to the top. same thing happens when I installed oracle 10g xe. The homepage can be connected and run sql command line is also not not opening. I checked in services.msc that OracleServiceXE and OracleXETNSListener is running.
  
  Firewall is disabled. Using XP SP3. Already had Oracle 8i and uninstalled and deleted all remaining sound files manually.
  
  I opened cmd and typed-
  
  C:\ > SQLPLUS / as sysdba startup
  
  I got this result-
  
  SQL > startup ORA-01078: failure in the treatment of the system ORA-01565 settings: error in the identification of the files 'C:\oraclexe\app\oracle\product\10.2.0\serv er\dbs/spfileXE.ora' ORA-27041: could not open the OSD-04002 file: could not open the file S/O-error: (OS 2) the system cannot find the file specified. SQL > disconnected
  
  I typed-
  
  C:\ > telnet localhost 8080
  
  I got this result-
  
  Connecting to localhost... Could not open connection to the host, on port 8080: connection failed
  
  I did not the configuration changes to all files .ora and nothing is listening on port 8080. I deleted IE (off the frustration of slow speed), and only have Chrome, Firefox n Safari on my system. Does it matter?
  
  I also disabled WLAN n DB restarted but of no use... Check the LSNRCTL status given.
  
  LSNRCTL > status
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC_FOR_XE)))
  STATUS of the LISTENER
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
  ction
  Start date December 2, 2011 10:00:30
  Uptime 0 days 0 h 21 min 31 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Default Service XE
  Listener parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
  dmin\listener.ora
  Listener log file C:\oraclexe\app\oracle\product\10.2.0\server\network\l
  og\listener.log
  Summary of endpoints listening...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = guddus-comp)(PORT=1521)))
  Summary of services...
  Service 'CLRExtProc' has 1 instance (s).
  Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  The command completed successfully

  For the removal of Win services, find out about 'sc' (sc delete).

  Path indicators system of additional Oracle installs (ora92...). Who installs is 'in progress' and who is uninstalled?

  What happens if you just to open a command prompt and run oradim?

  What is the oracle.key file exists in dir\bin House xe? What is its content?

• APEX listener 2.0.1 does not start when the system starts

  APEX listener 2.0.1

  APEX 4.2.2

  Oracle EE 11 GR 2

  Linux RHEL 6.3

  GlassFish 3.1.0

  -------------------------

  After the reboot of my Linux server with the configuration above, the listener of the APEX is broken and must be restarted by GlassFish. This may be the cause?  How can I get the APEX via GlassFish listener to restart the power-up system?

  NOTE: I don't have this problem when you use APEX listener 1.4 to the same server GlassFish.

  Thank you.

  Found the problem.  chkconfig was before the database has increased the age GlassFish and running.  Chkconfig changes of the parameters in the startup scripts. Works very well.

• APEX listener 2.0.1 with Glassfish 3.1.2 image file mapping

  Hello
  After spendig two hours reading documents, Articles and forum posts, this is the right time to ask here :-)
  
  I m using Oracle 11.2.0.3 Win 2008 R2 with Apex listener 2.0.1 and Glassfish 3.1.2
  
  When I generate the file i.war, asked me to use a directory of the image. that s okay. But a peek inside the weblogic.xml file shows me,
  that is the virtual folder /i used
  My application uses the resp/images. I would use the/images folder, but there is no Option, when generating the file i.war
  
  There are a few posts here, where users requesting a solution when you have a blank Page.
  Just look inside the page, you see a lot of content, but which is not displayed, because of all the .css / .js .png / .jpg files point to the wrong directory.
  
  I tried to regenerate the i.war file (with the XML of the parameter (I, m, a model of Java)
  <>context-root / images < / context root >
  
  But I get the error:
  
  c:\Temp > java-jar i.war - cvf *. * WEB - INF
  Error: Cannot access c i.war
  
  Any help?
  
  Thank you
  
  Marco

  As stated in the documentation of the listener [1] you can get assistance on orders of auxiliary command line using:

  
  
  java -jar apex.war help
  
  

  for example, view all the options taken in charge by the static command type (also noted in the documentation: [2]):

  
  
  java -jar apex.war help static
  
  

  which will display:

  
  
  java -jar apex.war static [--context-path] 
  
  Options:
  
  [--context-path] The context path at which the
  
  WAR will be deployed,
  
  defaults to: /i
  Arguments:
  
   The location where the Oracle
  
  Application Express static
  
  resources are stored
  

  In order to use/images instead of / i use

  java-jar apex.war static - context-path/images ${APEX_HOME} / images

  where ${APEX_HOME} is the location of your APEX facility

  References:
  [1] on the command line Interface
  [2] create the Web Archive for Oracle Application Express Images

• Upgrade of the Apex 3.2.1 (mod_plsql) at Apex 4.0 with Oracle Listener

  Hello
  We have a few applications in the Apex 3.2.1 (i.e. mod_plsql) which have not been displaced in Production yet. We intend to move to Apex 4.0 with Oracle listener as soon as they are available (we don't want turn on any web server mod_plsql). What will be the migration process? My apps work and look the same when I opened the Apex 4.0? All the features, formatting, etc. will be lost?
  I heard that there is a Migration Wizard, but there is no information available.
  
  When Apex 4.0 and Oracle Listener comes out? Summer 2010?
  
  I would be recognizing all of the information you have on this subject.
  
  Thank you
  Violeta

  A new Forum OTN has been implemented for the listener of the APEX: ADR, SODA & JSON in the database

  Please use this forum for all future APEX auditor positions.

  Kind regards
  David