API clean access Agent error

Similar Questions

• difference between cisco NAC agent and cisco Clean Access Agent

  Hi all

  If anyone has the idea on different between cisco NAC agent and cisco Clean Access Agent, please let us know your ideas.

  Thank you

  In 4.6, the agent has been revised and is now called the NAC agent.  Previous versions were called the clean access Agent.  So roughly, 4.5 and 4.1.3.2 agent are own access agents, and agents 4.6.x and 4.7.x are called NAC agents.

  Some of the changes are moving a lot of the agent configuration in an XML file, redesign of the GUI, adding a service portion (of the sort that the agent of heel is no longer necessary) and the best journaling agent.

• Question of NAC clean access agent (CCA)

  Hello

  IAM through OOB NAC deployment and I have a question about the agent of the CCA that is persistent on the client computers, if a customer leaves his work with the laptop that has the agent of the CCA and will use it in the House or any other network, will be the effect of the agent on the laptop access in any other network or not? and why?

  waiting for your answers

  MAM

  Mohamed,

  No difference in the other networks. All you will see if you capture traffic from this client is a UDP packet every 5 seconds. Since then, there is no CASE in your other networks, which is ignored and nothing else changes.

  HTH,

  Faisal

• CISCO CLEAN ACCESS AGENT ALWAYS OPENS EVEN ALREADY AUTHENTICATED

  Hello

  Just wonder why officer own access always opens even already authenticated. Please how can I eliminate multiple pop-ups?

  Thank you and best regards,

  Edwin

  Edwin,

  This occurs because of a misconfiguration and is not normal. Give more details about your configuration, a diagram of network if possible.

  Faisal

• NAC clean access agent forwarding page

  I have a pair of NAM and SIN that I recently upgraded from 4.1 to 4.7 in using the correct upgrade path.  These devices also received new IP addressing.

  My problem is that when a user is routed to the NAS, the redirection page seems to indicate the old IP address of the NAM rather than the new IP address, so naturally cannot display the page.  My host of discovery is set to the IP address of the NAM currently, tried to NAM and NAS.

  Thank you

  Matt

  Matt,

  Look at the certificate installed on your CAs. It is always issued to the old IP/NAME I think. Change cela and try.

  HTH,

  Faisal

• Vise to install 1008:9,-5000 access denied error installation Vocalizer for Logic 9

  I get the error:

  1008:9,-5000 access denied error

  As I am installing of Sonivox Vocalizer. It is a plugin for Logic 9.

  I traced down on the threads here that it's a common problem with the vise Installer application that many use to install their software, so they do not install for the same reason. Apparently the cause of changes in security in mac OS.

  How manually set privileges TEMPORARILY so that I can get this software to be installed from the installation disc?

  P.S. I already do not clean install (only admin), updated, then disk utility used to repair permissions and that it was not fixed.

  The system version: OS X 10.9.5 (13F1712)

  Kernel version: Darwin 13.4.0

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 3

  Processor name: Intel Core i7

  Processor speed: 2.8 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Only suggestion I've seen who could work is to understand what files they are manually and selectively instal time machine. Don't know what files choose so what makes a very hit or miss solution and I would rather understand how to change the permissions.

  Emailed to Sonivox support more than a week: no answer, so I post here.

  Model name: MacBook P

  L3 Cache: 6 MB

  Memory: 16 GB

  Reset user - file property See post by Linc Davis

  You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

  Fix the permissions of the user

• Logon Windows Live Family Safety - access denied - error Code 80070005

  Hello

  I can't connect to Windows Live family safety.

  I had it installed previously and it worked but he kept asking to open a session. When I tried to connect, I get the error.

  I uninstalled it and re-installed, but still the same. After installation, I can not connect. I get this error message.

  Access denied

  Error code 80070005

  I also had installed "Action Alert" because I'm under Win 7 and the time allocation feature works on Win 8 so I used Action Alert for the feature of time allocation.

  I uninstalled it also.

  Any help greatly apppreciated.

  Hi Wayne,

  Thanks for posting your question in the Microsoft Community forum.

  Let me try and help you with this problem.

  The "Access denied" error '80070005' error Code indicates that you do not have the permissions to change the parental control settings.

  1. Are you logged on to the computer as administrator?
  2. Are you signed in to the Family Safety with ID Parent website?

  First, check the date and time is set correctly.
  Right click on the clock in the system tray. Select adjust Date and time.

  Check and correct the month, day, year, hour, minutes and time zone.

  Reboot if you have changed all the foregoing.

  I would also refer to suggestions provided by "Christian_Co" and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-security/update-Windows-Live-Essentials-problem-error/e041a0d0-01FF-4E39-80c9-814a0aa3da19

  Note: Microsoft Safety Scanner: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Try these steps and let us know the result. If you have any other questions, we will be happy to help you.

• Clean access - manual update of Nessus Plugin

  Hello

  The last nessus.org 2.2 plugin file is greater than the seemed allowed download size via the clean Access Manager Web Interface.

  When I manually download the plugins through the CAM, I get the following error of the CAM.

  Result: Error: could not download content file length error (15954372 > 10485760)

  You don't seem to be able to remove some of the pluggins.tar.gz file for some reason nessus plugins any (I think it is write-protected), so I can't delete files to archive and download a smaller.

  How will I be able to download Nessus Plugins on the CAM? Is there another way that anyone knows? Surely, we should be able to do so through the prompt as well.

  Thank you

  I finally installed this way, but in a slightly different way. I used the tool to update-nessus-plugins to download and install the plugins in the directory. They appear still not in the GUI until I took an individual and any plugin using the GUI. Then all the plugins appeared in the user interface and can be used.

• Apache httpd cannot add configuration properties 'Agent error. "

  Hello
  
  I changed the conf file and when I try the link http://localhost: port/server-status I am able to view the status of the server.
  
  However by adding in hypric HQ - configuration properties, I get the error message "the Agent error: could not open Windows Service: Apache2.
  
  Here's the Setup: in
  General properties > chemin_installation > c:\ < path to app\apache
  Configuring properties > < IP address of the machine > hostname
  port < port I provide everything by logging into the application >
  path Access/Server - status
  
  By clicking on OK, I get the error
  
  Can anyone help please as I was thinking about a solution for the past 2 days.
  
  Thanks in advance.

  I had the similar problem because my windows service named apache2. 2 instead of Apache2. Please go to Panel--> Services and check your windows for Apache service name.

  Thank you
  Lorenzo

  Post edited by: Lorenzo

• CreateFile API returns access denied plugin Adobe on Windows 7.

  Hi all

  I tried to create a file on the desktop using CreateFile Win32 API from an Adobe Reader plugin on 64 bit Windows 7 computer. It works fine on the XP machine. But, when I tried to run it on a Windows - 7 6-bit machine, it gives access denied error.

  When I tried to do this in a standalone application, it works fine.

  Can someone help me what goes wrong here.

  --

  Thanks in advance

  Prasanth

  You are mistaken with #2 - this isn't protected mode. Search in the

  documentation for 'protected mode' and 'sandbox' Leonard suggested.

  Karl Heinz Kremer

  PDF acrobatics without a net

  PDF, training software development and much more...

  [email protected]

  http://www.khkonsulting.com

  On Tuesday, December 10, 2013 14:29, Prasanth Kumar Pitchika

• Thor.API.Exceptions.tcAPIException: An error occurred finding shapes

  Need help...
  
  I need key for fine o process form.
  This is my code:
  
  tcFormDefinitionOperationsIntf formOp = ioUtilityFactory.getUtility ("Thor.API.Operations.tcFormDefinitionOperationsIntf") (tcFormDefinitionOperationsIntf);
  Hashtable FormSearchCri = new Hashtable();
  formSearchCri.put ("Name of the Structure Utility.Table", "UD_LAPTOP");
  rst = formOp.findForms (searchCriteriaMap) tcResultSet;
  for (int i = 0; i < rst.getRowCount (); i ++) {}
  rst.goToRow (i);
  long formKey = rst.getLongValue ("Structure Utility.Key");
  System.out.println ("form key =" + formKey);
  }
  
  exception: ==
  
  Thor.API.Exceptions.tcAPIException: An error occurred finding shapes
  at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
  at com.thortech.xl.ejb.beans.tcFormDefinitionOperations_1kx3fy_EOImpl_1032_WLStub.findForms (unknown Source)
  at Thor.API.Operations.tcFormDefinitionOperationsClient.findForms (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  to Thor.API.Base.SecurityInvocationHandler$ 1.run (unknown Source)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs (unknown Source)
  at weblogic.security.Security.runAs(Security.java:41)
  at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs (unknown Source)
  at Thor.API.Base.SecurityInvocationHandler.invoke (unknown Source)
  to $Proxy2.findForms (Unknown Source)
  at oim.api.test.AccessPolicyCreation.createAccessPolicy(AccessPolicyCreation.java:48)
  at oim.api.test.AccessPolicyCreation.main(AccessPolicyCreation.java:65)
  Caused by: Thor.API.Exceptions.tcAPIException: error occurred finding shapes
  at com.thortech.xl.ejb.beansimpl.tcFormDefinitionOperationsBean.findForms (unknown Source)
  at com.thortech.xl.ejb.beansimpl.tcFormDefinitionOperationsBean.findForms (unknown Source)
  at com.thortech.xl.ejb.beans.tcFormDefinitionOperationsSession.findForms (unknown Source)
  at com.thortech.xl.ejb.beans.tcFormDefinitionOperations_1kx3fy_EOImpl.findForms(tcFormDefinitionOperations_1kx3fy_EOImpl.java:629)
  at com.thortech.xl.ejb.beans.tcFormDefinitionOperations_1kx3fy_EOImpl_WLSkel.invoke (unknown Source)
  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
  at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
  to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:477)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
  at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
  at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

  Try again with

  Replace

  policyCriteriaMap.put ('Access Policies.Retrofit Flag', ' yes');
  policyCriteriaMap.put ("Access Policies.By Request", "No");

  With

  policyCriteriaMap.put ("Access Policies.Retrofit Flag", "1");
  policyCriteriaMap.put ("Policies.By application access","0");

• Access denied ERROR

  I connect to my ReadyCLOUD (iPhone) app and I see my connected NAS.

  I click on it and see my home folder. When I select to view subfolders, I get an access denied error message.

  The only thing I've done is to restart the NAS Server

• Where do I go for clean/sweep all errors in my PC after PURCHASE THE ASCENTIVE PRODUCT AND has BEEN ACTIVE BY A REP CALL TELEPHONE BY TELEPHONE? SEE MY? BELOW... DF

  I bought THE ASCENTIVE for DIFFICULTY AND SWEEPING? All ERRORS, after doing a scan, which was free, I got a 10.00 discount, if paid 29.95, yesterday or late last night, in any case, I called the helpline for Ascentive this afternoon, he found that I HAD BOUGHT THE PRODUCT, THEN it ACTIVE IT ALREADY he SAID to me, SO now I don't know where to go for the cleaning/sweepingof these errors... once again He asked me to buy it again?  He just said to go to SCANPRO... When I hit ACTIVATE, I continues to be referred to PURCHASE THE PRODUCT once AGAIN, THEREFORE, do not KNOW where to go on my PC to reach the place to get my PC back in shape, you can help me, please, really a mess here... THX... Doyle h

  Hi Doyle,

  Personally I would not let this software within 100 miles of my computer, but for you, the computer, the risk and the decision is yours.  We cannot help you with the product here in one of our forums (particularly issues activation but really with anything either) - it is not our product, and you need to get assistance on their part, and not of us.  I suggest that you find out their support site at http://www.ascentive.com/support/index.php for all the assistance you need (assuming you decide to keep this and not cancel and uninstall everything).

  Good luck!

• Get an Access Violation error when playing games

  OP: Access Violation errors!

  I have download games on a game site that I trust and don't usually have problems. In the last 4 months, some of the new games that I downloaded and tried to play, give me the Access Violation error when I try to open the game to play the demo. Now just recently I noticed that several of my games that I bought and played for months, give me also Access Violation errors. I worked on it for months with people in customer service (on the site of games) and have not solved. The strange thing is, I can play some of these games on different websites without any problems or Violations of access at all. Yet the customer service people keep trying to 'fix' my computer, as if it were from my computer something to make this happen. At this point, I'm so frustrated that I had to try to get you all to see if anyone has experience this problem before and/or solved this kind of case before. I tried to turn off my Norton before download and play without success. I've updated everything that could be updated in regards to drivers, and such go.
  My system is Vista 32 bit, IE8, Norton Security and anti-virus.  Thanks for any help!

  Hello saund477,

  My research, I find that it is a known problem with Big fish games. I also see that some users were able to solve this problem and play games by disabling the antivirus program on their computer.

  I suggest that you turn off the Anti Virus program and check if you are able to play the game.

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  You can refer to the thread below that I found that the forum of Big fish:

  http://forums.bigfishgames.com/posts/list/4106.page

  I also suggest that you post your question to the Bigfish forum for a better answer to this question, because the problem is only with Bigfish games:

  http://forums.bigfishgames.com/games/list.page

  About the error when you try to run the command, it seems that you type the command correctly, make sure that you type the command correctly.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Just as a reference: how to FIX the annoying 'White Screen Of Death"with Silverlight and"Access denied"error with computer management.

  Well, I just hope that someone who has met these two mistakes will find my dose. It might save a lot of pointless research on the net.

  SYMPTOMS:
  -When you try to open a Silverlight application in your browser (Firefox, Chrome, IE, etc), your browser displays only a white area. When you right click on the white area, you can click on the Silverlight properties.
  -If you try to start "Computer management" by clicking on the 'My Computer' icon and select 'Manage', you get the following error: 'access denied '.

  CAUSE:
  The following errors are usually the result of a bad environment variable. In this case the "windir" environment variable does not work correctly. You can try running the management of the computer to start > run and entering:
  %windir%\system32\mmc.exe/s %windir%\system32\compmgmt.msc

  Notice the between the characters of percentage windir environment variable. If you run the above code, you will probably get an error saying that MMC cannot open the file. Look closely at the path, it's back!
  You will probably find any % somewhere.

  What actually happened here is the variable windir made reference to another variable: systemroot
  Why this creates problems, I'm not sure. Also, I don't understand what made then variable windir change.

  SOLUTION:
  -From your desktop or Explorer: right-click on "My computer" and select "Properties".
  -Click on the "Advanced" tab and then click "Environment Variables".

  http://pcauthorities.com/images/advanced-system-properties-XP.jpg

  -Did the windir variable. Together to "C:\Windows" do not think that it is already set to "C:\Windows", because windows then tells you. Double-click it to know for sure.

  http://www.adminxp.com/windowsvista/envvariabl.PNG

  -See, I told you! Change this to "C:\Windows".

  http://www.adminxp.com/windowsvista/editenvvar.PNG

  Hi Jooch,
   
  Thanks for posting such a detailed response, including symptoms, Cause, and resolution to "White Screen Of Death" with Silverlight and "Access denied" error with computer management"issues.
   
  I appreciate your time and effort to do the same. This could help other users of the forum as well.