app.execDialog returns an empty dialog box?

Similar Questions

• Free trial on Mac produces the empty dialog box

  I downloaded a free trial of Acrobat DC specifically to export text in Word.  CD player have been run successfully after that it has been installed.  But when I go to the Acrobat tools section and open the export function it will allow me to select the export document but the dialog box that appears once I selected 'Export' is totally empty.  The same thing happens if I am in a document and select "Save as", a totally empty dialog box appears and you are unable to select a location and proceed.  Anyone have any ideas?

  One must convert the text in a pdf document to Word for important revisions on a regular basis and have desperately needed an easy to use tool that eliminates a lot of time to shaped text after have exported them.

  iMac Intel Core i5 2.5 GHz

  Word for Mac 2008

  Safari 9.0.3

  Hi nicolej78674742,

  Do it me know the point exact version of Acrobat DC & operating system installed on your Mac?

  Make sure that Acrobat DC are updated to the latest version Release Notes | Adobe Acrobat, Reader.

  To save as a problem, try the troubleshooting steps below: -.

  The default "Save as" dialog Acrobat DC is different from the dialogue box you had in earlier versions of Acrobat, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards
  Nicos

• Tower or disable Windows features displays the empty dialog box

  I go to control panel > programs and features and click then on "Turn Windows features on or off". I get called "Windows features" dialog box that says "Please Wait". After 45 seconds, this dialog box becomes empty and nothing is displayed.

  I ran the twice System File Checker, but it shows no problem. I did repair Startup (by pressing F8 key so that Vista boots) but the problem persists.

  As suggested on some websites of support, at the command prompt, I have ran reg delete HKLM\COMPONENTS /v StoreDirty but had "error: the system was unable to find the specified registry or the value key.

  I tried http://support.microsoft.com/kb/931712 and it's of no use to me.

  I can't do a system restore I don't know since when this problem started can be 1 month back or can be 6 months because previously I had no need to turn on the features of vista as an option.

  I use a stand-alone HP laptop (Intel Core 2 Duo 2.0 Ghz) with Vista home premium pre-installed, and I also installed SP1. Please do not suggest format me my laptop and do a fresh install of vista that HP never gave me the operating system DVD.

  What should I do now? Help, please!

  Hey Anshul Rastogi,

  Thank you for your response.

  You are able to run updates on your system?

  If Yes please make sure you have all the updates installed on your system.

  Please see the following article to guide you through some troubleshooting steps: http://support.microsoft.com/kb/934538

  Please perform a system update and also walk through the troubleshooting steps in the above article and let us know if any of the two solves your problem then that otherwise we can take the next step and find a solution for you. The next step is to restore your system back a month to see if this is useful, and if not then do a restore of the system to the next restore until you find one that allows your system to the function you are eager to point.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Empty dialog boxes and missing text in tools

  Acrobat 10.1.8 - Adobe Creative Suite Standard

  Has several dialog boxes have become empty and fill the entire screen, for example the box that appears when a scan is complete.  In addition, when the tools are displayed (and the buttons on the toolbar for the tools are not there anymore) the icons but not the text.

  I guess it's either a police problem - maybe some fonts used by Acrobat have been deleted - or I have to download the prgoramme and reinstal it.  But I can't find a download site for Acrobat 10.  There is no problem with the other Creative Suite programs.

  What should do?

  Make sure that you have the complete Segoe UI font family. These aren't the Adobe fonts, but essential Windows fonts.

• "On Mac, I want to return to the dialog box asking"Hide Photoshop or hide"Extra"

  Hi, Merry Christmas

  I got a dialog box when I press Cmd-H, and I decided that to hide Extra.

  I want to see the dialog box again, and it's only for the first time.

  I have reset my keyboard shortcuts and based on dialog boxes reset all the warning in the preference menu, but it does not seem

  To be precise, I ask not how to change his behavior when I press H command.

  I know how to change int menu keyboard shortcuts.

  I just want to see the dialog box again.

  Thanks in advance

  I think that you need to reset the preferences of cc of photoshop by pressing the Shift + Cmd + Option, then start photoshop cc, hold down the keys until the

  you see the dialog box asking if you want to delete the file from photoshop settings and press Yes.

  Then you should see this dialog box after pressing Cmd + M, but only once you see the dialog box until that reset you the preferences of photoshop cc again.

• Creating cloud app loads then freezes with the empty dialog box.

  When I click on the application of cloud to create in the status bar or run in the menu of the application to load, then a small empty box appears with a little creative cloud logo in the middle. Nothing happens. I can't close the window and nothing does. I force the closed application.

  The system carries out a new copy of windows 8.1 and a fresh install of adobe creative cloud.

  The only thing I did was change my adobe account password after requested.

  Applications that I installed still work, but I can not add or update one of the applications.

  This is what it looks like.

  

  I've updated the client from here

  https://creative.Adobe.com/products/creative-cloud

  and it fixed the issue.

• Re: Creative cloud app loads then freezes with the empty dialog box.

  I downloaded adobe 3.0 cloud and it take everything off and now is the download of updates...

  https://creative.Adobe.com/products/download/creative-cloud?version=3.0

  I downloaded

  https://creative.adobe.com/products/download/creative-cloud?version=3.0?

  and fixed it thank you

  Mike: Mangone

  Senior multimedia Designer

  Bosch Auto Service solutions

  1700 Fairlane Drive

  Allen Park, MI 48101

  TEL. + 1 313-425-3914

  Mike.Mangone@US. Bosch.com

  www.Bosch.com

  The information contained in this e-mail transmission is intended by Robert Bosch GmbH for the use of the designated individual or entity to which it is directed and may contain confidential or privileged information. If you have received this e-mail in error transmission, delete it from your system without copying or transfer and inform the sender of the error response e-mail, so that the sender address records can be corrected.

• Windows Update displays the empty dialog box - cannot update (Vista x 32)

  Hello!

  Dell Vostro 1400 laptop
  Windows Vista 32-bit

  I had this problem since December 08 and sought a solution for this problem on and off for 6 months now, hoping ultimately that someone could post a viable solution.  So far all that I tried and reading doesn't seem to work, but at the same time a lot of positions were never concluded by the original poster so, either they abandoned or found something else.

  This image describes essentially the question that I have:

  Here's my Log of Windows Update (to change the txt extension, so that I could upload it)

  Following advice found on other posts, I tried using these two programs and changed nothing: windowsupdateagent30 - x 86 .exe and ResetWindowsUpdate.msi (in the first mode and aggressive mode, restarting after each time)

  Let me know if there is any other information I can give you, I'm waiting for your tips.

  Bravo and thanks,

  Jens

  Hi JensUS,

  Thanks for posting your answers on the community forum.

  According the information on the forum, it sounds as if, has)  There may be malware, virus on your system, B problems.)  Just system files are corrupt.

  Here are a few links that our community members have posted involving Malware and Virus protection.  Please run or walk through the suggestions as you wish;

  AntiVirus information: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/05e05fc2-e4eb-4a60-9384-7b1203941138

  Information of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  If the Antivirus or malware don't find any underlying problem.  If you are able to get the disk, following the suggestion of Matt can lead to the desired result.  If that fails, what Joseph has suggested is a good plan.  It is not a NEW INSTALLATION of Windows Vista, it replaces all just all the system files with the correct copy of the file system.  After it's over, you will have to reinstall any service packs and updates have been installed. (See note Joseph.)

  Please let us know if further information is required on this issue.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dialog box empty on request runnign.

  Hello

  I have a NEC Powermate VL370 under Windows 7 Ultimate x 64, latest Java & A Geforce FX5200 graphics card. With some installers when I start them until they show as empty (screenshot below) and the buttons will disappear and come back. Is anyway to fix this?

  

  Thank you

  Hello

  Please keep us updated on the status of the issue.

  For the problem of blue screen, please use the suggestions in this article and check the issue.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important notes:
  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Skip the "Relocation of Windows 7" section in the article above.

  You can try to create a new user account and verify the original question about empty dialog box.
  Reference:
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows/create-user-account

  If the problem does not persist in the new user account, then use following article to copy the data from the old account to user again.
  Reference:
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile

  I hope this information helps.

  Thank you

• Print dialog box appears empty

  Hello

  I installed Adobe Acrobat Reader (free) DC and Adobre Acrobat X Pro (with license).

  On two cases that I can't print because when I click on the print dialog box icon goes empty. It reads as follows:

  The software Adobe Acrobat Reader DC:

  

  Adobe Acrobat Pro x:

  

  On Adobe Acrobat X Pro, when I click on "print test page" on PDF printer (automatically installed since Acrobat X Pro), it is printed correctly. The problem is the display of the print dialog box.

  I uninstalled and installed several times.

  Please, tell me what can I do to display the dialog correctly printer in order to print my PDF files.

  Thank you.

  Hey Sonia Galilea,

  You can also consult this KB doc for more information: empty dialog boxes and text is missing Acrobat interface

  Let us know if you need additional assistance.

  Kind regards

  Meenakshi

• dialog box empty when trying to print

  When I try to print with photoshop, it's happening; I got the empty dialog box with cancel botton! After I click on cancel printing options are grayed out on I don't know what to do / I already tried resetting preferences / and also reinstall photoshop I use CC 2015 photoshop on windows 7

  

  What graphics card you have?

  Check if your graphics card is supported: Adobe Photoshop CC GPU (graphics processing unit) and FAQ video card

• Dialog box fonts / sizing broken, can't see the options

  Hi all

  I'll insert two images to illustrate a problem with Adobe Reader on Windows 7 Pro (updated). The same problem occurs in 10, XI and DC.

  

  

  The first menu is to print the Second Edition - Preferences. Sometimes the police are ridiculously high and it is not possible to scroll sideways to see what I do, sometimes the police is only a black pixel by character.

  I uninstalled, remove entries from registry under HKEY_CURRENT_USER\Software\Adobe\ < program names concerned here > reinstalled; no help.

  I tried to reset the toolbars, but the dialogue is broken in the same way and does not solve the problem.

  I have read some threads with similar problem as Impossible to resize too large print dialog box , but haven't found a solution.

  Anyone hazard a guess as to how to solve this problem?

  Best regards

  --

  Dogo

  Hi dogo42,

  Try the troubleshooting steps in this document KB empty dialog boxes or missing GUI text.

  Let me know how it goes.

  Kind regards
  Nicos

• VMware Player configuration dialog box is VIRGIN on install or uninstall

  I spent 2-3 hours combing through discussion forums, and I can't find a solution. I also noticed that it is a very common problem and good solutions do not actually apply to the problem. Hey tend to be generic fixes or patches for other versions of Windows (which may work) or other software (which do not seem to work at all). So if you please (please) don't refer to solutions aimed specifically at the question. On the other hand, it please add real corrections that actually worked so that the next poor slob who has this error will find useful info all in one place. Thank you :-)

  Host computer: Windows XP Pro (32 bit)

  Already installed VMware Player 3. something and it worked well.

  I remember the same error when I install 1-2 years ago, but I don't remember the fix I used.

  I downloaded, verified and then ran the latest Player (VMware-player - 5.0.2 - 1031769)

  I received a 'VMware Player Setup' empty dialog box.

  I waited for 5-10 minutes and with nothing happening, I made an "end task".

  I restarted the computer and tried again. The same problem.

  I searched an answer here and realized that I had to uninstall first the player 3. xxx.

  Control Panel-> Add/Remove Programs-> VMware Player-> uninstall = the same problem (empty dialog box)

  I checked the error log error is: ERROR * CHtmlDialog::CallJScript: failed to get the required jscript ID required; COM error :-2147352570

  I ran the VMware_Install_Cleaner.exe, the content of the deleted, temp folder restarted, and I tried uhninstall-> same problem

  I tried the fix here: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1027986

  1. Open a command prompt. For more information, see opening of a command or shell prompt (1003892).
  2. Run these commands to reregister the files needed and details:
     • If VMware Workstation is installed on a 32-bit version of Windows:
       • regsvr32 jscript.dll
       • regsvr32 vbscript.dll

  I received a message that both were successful. I have Windows restrted (reloaded), cleaned from the temporary folder, tried to uninstall-> same problem

  I stopped my AV software and tried to uninstall again-> same problem

  I deleted the contents of the temp folder and tried to uninstall again-> same problem

  I cleaned the registry, rebooted and tried the new uninstall > same problem

  I tried to install without uninstalling. I tried various suggestions, including decompression of the file in a folder (vmplayer) on the root of C: and the manual installation using the x 86 msi file. This method failed due to several errors.

  Then...

  (1) how to uninstall version of xxx 3. Player and clean while I have a no clean, vmware player system?

  (2) how to install the Reader 5. XXX without this error dialog box empty.

  Thank you.

  I have a solution!

  I deleted all the files associated with VMware Player. In my user files and all (Public) users. Then I deleted all the temporary files used by vmware player.

  I ran the installer for vmware player 3.14 (the original installation) and chose 'uninstall '. He crossed uninstall it without any problem or error. After that, he asked to restart the computer I did.

  Then I ran the installer for the 5.02 and installed without problem or error. He never asked to restart the computer.

  The only thing I noticed was that when I ran VMware Player it took a long time to start (maybe 2-3 minutes). So, I did a reboot and then it was all right, to leave quickly and loading of a virtual machine as fast as before.

• can I return a string in a custom dialog box created with app.execDialog ()?

  Adobe LiveCycle Designer Cookbooks by BR001: using app.execDialog () in a form in Adobe Designer

  I am the above post and try to do the following:

  

  I want to write the output of one of the selection of list to PDF dialog box, what I'm going to script?

  Something like document. Write() in Javascript (see: http://www.tutorialspoint.com/javascript/javascript_dialog_boxes.htm ). I tried to use document. Write() in the script dialog box, but it doesn't seem to work.

  Or can the dialog box return a string value?

  According to the PDF example in the first link, this dialogObject is what is returned when you see a dialog box:

  var dialogObject = {}

  DS1: ({}),

  execDialog: function() {}

  Return app.execDialog (dialogDescriptor);

  },

  selectedItem: {function (control)}

  If (typeof (control) = "string") {}

  control = this [control];

  }

  for (var control element) {}

  If (typeof (control [item]) = 'object') {}

  var r = this.selectedItem (control [item]);

  If (r! == undefined) {}

  Return r;

  }

  } else {}

  If (control [point] > 0) {}

  Returns [dot] control;

  }

  }

  }

  },

  };

  Return dialogObject;

  Hello

  Yes it is possible, by removing the execDialog() function and call the just before execDialog the dialogObject return, you call the dialog box to be executed directly in the service, so if you start a string on the top of the function and the validation value you set the string value of the item found in the list box then you will be able to return the value of the string instead of the dialogObject...

  Here is a short example:

  dialog() {} function

  var strValue = "";

  var dialogDescriptor =

  {

  Description:

  {

  align_children: "align_row."

  items:]

  {

  type: "display."

  align_children: 'align_left,

  items:]

  {

  type: 'edit_text. "

  item_id: "txt1"

  Width: 300

  },

  ]

  },

  {

  type: "ok_cancel."

  }

  ]

  },

  validate: function (dialog)

  {

  No validation required

  Returns true;

  },

  commit: function (dialog)

  {

  elements var = dialog.store ();

  strValue = items ["txt1"];

  },

  };

  var dialogObject =

  {

  execDialog: function() {return app.execDialog (dialogDescriptor);},

  //...

  };

  app.execDialog (dialogDescriptor);

  return strValue;

  }

  Hope this will help you

• Some extension dialog boxes are empty

  When I press some buttons extension (for example Ghostery, Self-Destructing Cookies) on the top bar, or on the menu bar, open the dialog boxes, these boxes opens but looks like white empty boxes. They have worked before, but now they are empty.

  Here is an example: http://c2n.me/jqqe35.jpg

  This problem may be caused by the extension of Ghostery.

  • [1020685/questions/1020685] The module Ghostery + 31 and newer FF = window white options

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes