App Hasplmd problem

Similar Questions

• El Capitan and App Store problems

  El Capitan: App Store poster update available (for example the most recent iTunes update). It seems to be but then disappears from the two lists 'available' and 'installed '. This has happened too with a security update. Any ideas gratefully received!

  While holding down the option/alt key, click the  menu and select system information. When the report appears to look in the software section for the facilities. Updates show there? If so, can you control - click on the update and get an option Hide?

  Update App Store problems See Linc Davis response.

• Hi, 2nd try on the Coll CS6 Master not downloaded (at the location previous app) no problem, but when I opened a

  Hi, 2nd try on the Coll CS6 Master not downloaded (instead of pref app) no problem, but when I opened a n appl I get "your trial has expired. What should I do?

  There is nothing you can do. You misunderstand how it works. The tests only run once and that's it. Once you have exhausted your 30 days, there is no way to run a trial a second time on the same machine. You will need to buy the software if you want to continue using it.

  Mylenium

• Remote control/software Apple TV with the App Store problems

  Seems ridiculous that a Sept 2016 4th Gen apple TV purchase has the same problems of connectivity with the App store. Impossible to connect, or even choose App store, or spare parts offline, erratic, glitch and acts as a problem of distance, but seems to be a software problem or interface. Obvious corrections or ideas to stabilize or least to increase connectivity to app store with 4th Gen Apple TV/remote control?

  No problem of connectivity with a 4th getting Apple TV remote here... Sorry, you encounter this problem with it.

  See if there is something that will help that you haven't tried in this article to support > set up the Apple TV Remote - Apple supported application

• connection app store problem

  Hello. We are in Iran and we cannot connect to the app store on our idevices. What should we do to solve the problem.please my question answer.

  Best regards!

  What exactly is your problem? I guess mine is the same

• app photo problem!

  transfer photos from ipad to mac. everything is good. photos in the photo library. Once I have transferred the library on a drive external hard, in case of an attempt to open it, gives me the following message is displayed. "the library could not be opened. pictures has tried to fix the 'photos' library but is unable to open it. "Open another or quit smoking. external hard drive is a seagate desktop drive backup. the format is windows ntfs. I know it must be journaled anything mac. but before the new photo app it worked well with the old iPhoto, able to transfer it to the outside and to see all my photos. What could be the problem now? Thank you

  external hard drive is a seagate desktop drive backup. the format is windows ntfs.

  No - you don't have a problem with Photos - you have a problem of format hard drive - library pictures are used on a drive as Mac OS extended (journaled) dierectly linked to a fast wired connection and not used as a Time Machine backup volume

  LN

• App Store problems not search results or slow download

  Since the update to 9.3.3 iOS App Store (East coast of United States for me) gave me a lot of problems and errors with the search for updates and installation of applications. App detail pages also not load. What a coincidence, the update iOS or something else? -I can't even this post to the correct community (grayed out).

  Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

• Is anyone know App Store problems?

  I have a relatively new MacBook Pro (2015) with the latest version of OS x. recently, every time I try to make an App Store or purchase existing update I am blocked by the following error message - we could not complete your purchase product distribution file cannot be verified, it may be damaged or is not signed. I tried to go into safe mode and making the purchase - same thing happens. I tried to use the Console to search for the folder where the error occurs

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• HP first app - a problem of circle geometry

  Here's a problem for a graphical solution for (using the Geometery application):

  Given a unit circle, finding another circle that is framed by the axii unit circle and x and y.

  I tried to use the features in the application, but either I could not find the means to compel the circle (as with the two tangents and circle) or through indirect and mistakes means (on the resolution of the crossroads, etc.).  I thought I had it almost with the following definitions is entered in the symbolic view:

  

  I actually had to cheat and understand I and J with Algebra first here then place exactly (since I can't force things as I want)

  However, when I draw it, the GK circle is not visible! (?), as shown below

  

  The new circle must have been touching points H, I and J.

  I also tried to generate a horizontal line at point I using plotfunc (computer (GI)) and trying to intersect with x = line is but the calculator gave a bunc of errors.

  I found the Geo. App. a bit tempramental.  It seems that many times I have to find just the right way to get things to work (if that is the case).  Usually by then it would have been quicker to do it by hand on graph paper.

  Anyway, why no smaller circle of the solution and how could I have do more easily in the application?

  It worked, thanks!

  I guess it was confused (which I don't think it should have been) on the double intersection of the line and the circle.

  I of course didn't know this third option with inter () - this isn't in the help!

• I have an iPad 2 Air, version 9.2. Whenever I have delete an app that has problems and then try to reinstall it, it simply returns to the iCloud as I sent it, with the remaining problems. How can I reinstall the app without problems?

  I have an iPad 2 Air, IOS 9.2.  I deleted (uninstalled) an application that follows my use telephone and internet for me, because it stopped working.  Whenever I deleted an application he's apparently going to iCloud, and put it back, it simply sends down, warts and all, as happens with this one. How can I get the application in a "clean" State, under its previous problems?

  Deleting an application does not send it to iCloud, and it deletes your system actually.  The problem is that the defect in the application has not yet been set by the developer, and your relocation simply recovering the defective version of the app on your iPad.  Expect that the developer of the app has a new version until you try to reinstall.

• With Fuzzy Toolkit App Builder problem

  Hello

  Today, I wanted to build an application (via LV2009) with functions of 'PID and Fuzzy Control Toolkit'.

  Now the app Builder is looking for a type definition in vi.lib (as shown in the photo), but it does not find the CTL file - but the path used for research is correct! Then I do the search manually, tap the CTL asked in the right place (and with the name correct, of course), and the build will succeed.

  What is happening here?

  GERD,

  There seems to be a problem with the lvlib of fuzzy logic tool. I filed the #348498 against her CAR.

  This issue is obviously for 2009 has been and remains in the LV 2011 SP1.

  hope this helps,

  Norbert

• File with app folder problem

  Hi everyone, I was wondering what could be causing my problem. When I build and launch in my application works fine load a ROM from its own cluster of debug files. When I compile as liberation, it suddenly seems to not be able to load the file in memory. My built in logging tells me that the file can be opened but simply not reading in memory as the following code

  strcpy(filenamechars, filePath.c_str());
      std::ifstream file;
      file.open(filenamechars, std::ios::out | std::ios::binary);
      if((file.fail() != 0))
          {
              mainLog.message = "FAILURE AHAHAHAHAHAAHHAHA GOTCHA (TEH ROM WONT REAAD!!!)\n";
              mainLog.writeMessage();
          }
      file.seekg(0, ios::beg);
      int begin = file.tellg();
      file.seekg(0, ios::end);
      int end = file.tellg();
      int length = end-begin;
      file.seekg(0, ios::beg);
      if(length > 0xDFF)
      {
          #ifdef LOGGING_CHIP8
          mainLog.message = "TEH FILE IS TOOO BIG ABOOOORTT LOADINGGG!!!\n";
          mainLog.writeMessage();
          #endif
          return;
      }
      char readArray[0xDFF] = {0x00};
      for(int a = 0; a < 0xDFF; a++)
      {
          readArray[a] = 0;
      }
      file.read(readArray, length);
      #ifdef LOGGING_CHIP8
      if((file.fail() != 0))
      {
          mainLog.message = "FAILURE AHAHAHAHAHAAHHAHA GOTCHA (TEH ROM WONT REAAD!!!)\n";
          mainLog.writeMessage();
      }
  

  Tells me that the rom will not read. Somewhere, something goes a little wrong or something similar. It is incredibly difficult to see that the way in which this happens only in the debug version. Now notice that the following code is running quite well.

  std::ifstream file;
      char filenamechars[0x200];
      strcpy(filenamechars, filePath.c_str());
      file.open(filenamechars);
      if (!file.is_open())
      {
          #ifdef LOGGING_CHIP8
          mainLog.message = "This ROM seems to not be opening... ITS LIKE ITS NOT THERE!!! :O\n";
          mainLog.writeMessage();
          #endif
          return false;
      }
      else
      {
          file.close();
          #ifdef LOGGING_CHIP8
          mainLog.message = "This ROM opens! :D\n";
          mainLog.writeMessage();
          #endif
          return true;
      }
  

  Very strange no?

  This is normal: when your application is installed in development mode (if the debug or not), you can make changes to its assets in order to solve problems of implementation as quickly as possible, without a long package and deployment cycle.

  The assets of an app in release mode is frozen.

• BlackBerry App serious problems with the new facebook app!

  Yesterday, I downloaded the latest app facebook to my Q10, because I was excited to be able to choose the setting for the news feed. I ALWAYS want the most recent messages on top of my news feed!

  However, the new application is the TOTAL OPPOSITE of the timeline (not only mine, but also my friend timeline). I just want my most recent messages on top (just like the desktop version of facebook).  However, as I look at my calendar on my Q10, I see a post from 3 days ago (an eternity in the smartphone era) on top of my calendar. The new facebook application, I cannot change that.

  I noticed the same problem when you look at the chronology of the friend. I see 12 - day old post at the top of the timeline of a friend who adds new posts per DAY!

  This glitch is completely unacceptable. This glitch made the laughingstock of BlackBerry! Apple and Samsung are celebrating this glitch affecting BlackBerry users.

  Look, I love the QWERTY keyboard, but this should not be an excuse for neglecting the customers like me who want the best service of our applications.

  This problem has been fixed and a new version is available in beta Zone.

  www.BlackBerry.com/beta

• Smartphones with apps blackBerry problem

  Hello

  I have my Blackberry curve 9300 for 7 months already and a couple of days, two of my apps just be removed by themselves - facebook and the Blackberry app world. I have tried to reinstalled them both many times but each time, an error occurred and installation is not finished. One of the messages that are displayed, says there is a problem with the Internet, which is not true. I browse different websites without any problems.

  I tried to install facebook even through their Web site, but market... it means only: an error has occurred, please try again later.

  I rebooted the device and tried again, but it did not work...

  Could someone help me?

  Hello and welcome to the community!

  Please check your time zone settings, according to the this KB:

  • KB25882 "An error has occurred. "Please try again later" is displayed when the user tries to access BlackBerry App World

  Otherwise, you can search the KB database for maybe more useful articles that meet your situation.

  Good luck!

• BlackBerry Smartphone app :-(world problem

  I just bought the app LensBoost, during the installation there was a mistake and now the app went to my list of applications uninstalled on the app world, it give me any option to re - install :-(, nobody knows how to solve this problem? I know that is not a lot, but I paid £2.00 for the app and it's a shame that it was not installed, any help would be great! :-)

  Hello BeckyBrown_,

  Welcome,

  If you say this particular Application is uninstalled and not in your list of installed, try this:

  Please perform a battery pull reboot as this device while is powered on remove waiting battery for a min. and then reinsert it wait until the device take a long restart your computer.

  After that go to App world > My World > press the Menu key, and then refresh list. See if it helps.

  If this isn't the case, then try to empty your App world Cache How to clear the cache of BlackBerry App World. After that, another battery pull reboot and see if helps.

  Go through it and let us know.

  Good luck

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.