App is not install properly
The app is not installed, was signed with a valid certificate. We are not able to see our icon fill in Itunes and can not get our test application published for viewing
This is probably due to the UDID of your device not added to the mobileprovision file.
1. ask your device ID (UDID) to iTunes or Xcode.
2. go in the iOS Developer Center, add the UDID and then change the mobileprovision file to include the UDID.
3. download the mobileprovision file and rebuild your application using this file.
Your application should appear when you load it.
Tags: Experience Manager Mobile
Similar Questions
-
Satellite A300-1MC: network controllers drivers are not installed properly
Hi guys...
My first lol just purchased Toshiba and I can't ge the wireless to work?
Toshiba A300 - 1MC Intel T5800 3gig of ram 20gig hard drive Vista Home wired Internet access works ok, but in Device Manager it says my network controller drivers are not installed properly?I have reset to setting faactory and reinstalled everthing but its still the same.
Ideas a BIG help thanks in advance.
This strange s
Usually, using the operating system recovery disc must be set to the factory setting and everything should be ok.However, I recommend first upgrading the BIOS, then the LAN/WLan card driver.
The card chip Realtek (Realtek 10/100 Base-TX) LAN and WLan card chip is Intel (Intel 802.11 a/g/n WiFi Link 5100AGN)Download the WLan driver from this page Toshiba WLan:
http://APS2.toshiba-tro.de/WLAN/and the LAN driver can be downloaded from the Realtek page, or on site pilot European Toshiba too.
Remove/uninstall the old drivers and then install the new drivers.Good bye
-
Original title: my "Windows Installer is not installed properly.
I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!
Hi Mark,
Did you do any hardware changes or software on your computer before this problem?
You can follow this link & check if the problem persists:
Because of Windows Installer, you can follow this link & check if the problem persists:
Error message "Could access the Windows Installer Service" when you install the application
Hope the helps of information.
-
The Windows Installer
I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?Hello
-What you have done to try to solve the problem?
-Did you change on your computer due to which the question has begun?I recommend you follow the steps in this article and see if the problem still occurs.
How to solve the problems when you install or uninstall programs on a Windows computer.
-
Crazy became Windows Installer
have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs. I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.
Original title: Windows Installer Service could not be accessed error during installation or uninstall a program
Hi, Honorine,.
Follow the steps listed in the following article:
See also:
Problems installing and uninstalling programs on Windows computers
-
says my windows installer is not installed right
First see if it is, try to start, run, type: cmd cmd type: msiexec
If installed, should open a new window with the plug. Type: When OUT thru
Back to run, enter: msiexec /Unregister
After runs, back to run, type: msiexec/regserver
It's cmd checked the installer is not installed properly.
-
Original title: could not open error on my outlook express Message
When I try to open outlook express, I get the following two messages. Outlook express could not be started. The application is not in the message store outlook express. Your computer may be out of memory or your disk is full. I cleaned the disk and I still get this message. I also have another message saying Outlook express could not be started because MSOE.dll Outlook is not installed properly.
Pleae help
Is MS Outlook or Office installed also?
If so, see this.
See the reference by PA Bear in this thread
http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995If Outlook is not installed:
When OE crashes or won't start
http://www.insideoe.com/problems/errors.htm#crashBruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
IE 9 beta was not installing properly and now I can't use IE at all... How can I remove this version and reinstall IE 8?
I tried the MS site, nothing helps.
back to the restore point and still have problems.
internet access through backdoors on the emails.
How to uninstall IE9 Beta?
http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/7250c2d2-20e1-4F0A-8056-4a6abd9a0f9bIf you still have questions, please ask the in Forum Internet Explorer
http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threadsBruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
what I tried to do is to install the latest version of windows messanger (msn) ive, but im not able to make my windows installer comes back with an error message saying that the windows installer is not installed properly, please some help this starting to do my head in
http://support.Microsoft.com/kb/2438651#reso1
See the above article, I suggest you use not Fixit, but it's your choice.
For manually fixit it you follow the steps in the resolution.
fyip
-
When I start my computer, I get a message saying "I Tunes it was not installed properly, please reinstall I Tunes (Windows error 14001)" Im using Windows 7, 64-bit system. I read that download a Microsoft Service pack update works but I'm not sure that one. Can anyone help?
Hello
Follow the information from apple to the link below
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.Apple.com/kb/HT1923
and or ask for their support of itunes
http://www.Apple.com/support/iTunes/
Also try the discussions of apple itunes
-
Original title: Windows 7 critical updates
A number of critical updates made automatically in the last two days. He was stuck in a loop "failed to install...". "for hours. I tried to make it a point to restore in safe mode, and it is stuck in a loop (more than 12 hours). I tried to uninstall and it won't let me. Now I get "Windows Installer Service could not be accessed. This can occur if the windows installer is not installed properly. "If I turned off the computer and do not ne pas demarrer start in safe mode, shut up always on the original"failed to install ". I need help!
Windows restore points have never been of any property,
Images of a completely separate hard drive system would be easy to undo this question
It's so time spent to create system images before downloading and installing windows updates
http://www.SevenForums.com/tutorials/219533-troubleshooting-Windows-7-failure-boot.html
http://www.Macrium.com/reflectfree.aspx
https://www.YouTube.com/watch?v=KQA7NlLvxg8
If you need to reinstall windows
It is expected by M$, we must now jump through hoops to clean install.
http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/
-
BlackBerry App can not install applications
Impossible to install any browser in my z10. It shows the application already installed if the app is not installed.
I'm not sure. But try this...
Open BlackBerry world. Glisser slide down from the top, and then select settings. Select general. Select Update BlackBerry World. Restart the device.
... then test.
-
App is not installed. error 0x80072f78 code. Why?
App is not installed. error 0x80072f78 code. Why?
Hi, Giuseppe.
Have you installed a third-party antivirus software?
Error: 0x80072f78 is caused due to temporary connection related problems.
Run the next fixit and check if the problem persists.
http://support.Microsoft.com/kb/836941
Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
I hope this helps.
-
Apps will not install or update on wifi
Hello world
I'm having a problem at the time where apps just not update or install when it is connected to a WiFi network but are on mobile data.
I open the App Store and go to update a applications based on notifications, but all I get is the spinner. Even with the installation of new applications. I get the circle with the stop button, but no progress.
However, if I switch to mobile data downloads and then begin immediately. It's like the WiFi connection cannot connect to Apple servers. Along the same vein, I can't check the iOS updates. I just get the error message
Failed to verify the update. An error occurred when checking for a software update.
What happened through several WiFi networks, in different places, and I asked a number of people who all have the same problem.
I tried to reset network settings, change the DNS and using static IP addresses, but in vain.
I'm on an iPhone UK 6 s, iOS 9.2.1.
Device purchased directly by Apple.
Any help would be appreciated.
Other than downloading applications - WiFi works for stuff like email, surfing and streaming?
-
I have a Logitech EyeToy USB Camera and that you can not install properly.
.
Vista Windows
No driver
Hello
1 you get an error message during the installation of the EyeToy USB camera? If so,.
2. What is the exact error message you get?
Try to install drivers Logitech EyeToy USB Camera from the site of the factory and check if it helps:
Updated a hardware driver that is not working properly
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links
I hope this helps.
Maybe you are looking for
-
Pilot BACK to map an ESS Maestro2e (ES1978)
I need a driver BACK to an 'old' game for Win95 (in fact the 16-bit DOS environment). Technically I tried many possible solutions because I'm quite advanced in the technology of the OS. I also spend hours to surf the web, trying to find a driver for
-
Milestone - why the contacts application displays only 16 contacts?
Hi all! Something strange with this app - it shows only 16 contacts and when I add a new contact it saves but does not display after (if I type the name of the contact in "contact search" the BONE shows that what we find, but the search using general
-
all of a sudden when I look in my photo files, thumbnails are almost entirely covered by a blue box with 2 arrows forward white. It is so annoying because now I can't see the thumbnails. How to remove the arrows? Thank you
-
BlackBerry Classic bought on Spain?
Hello everyone, Did you know where I can buy a blackberry to the classic on the Spain? or in which countries the keyboard should be compatible? I think that the American keyboard should be compatible. Thank you Jaume.
-
My drive SATA DVD - RW X 22 crashed unexpectedly as follows: After uninstalling the package iTunes, including Apple Application Support, Quick Time and Hello I successfully some of my files on CD and the disc ejected safely. A few minutes later, I in