Should I buy a disc to reinstall Windows to fix all my computer problems based on the list below to start? Thank you. Any help welcome and appreciated.

  • my firewall will not turn an error message that says that my Windows Firewall on d/t / / service of Sharing (ICS) connection does not work correctly or is disabled.
  • I get error messages on my computer is in danger due to the McAfee needs attention and does not protect from my computer, then I check and it's good, or once and a while the real-time scanning enabled disabled or sometimes the firewall. I do not turn off these.
  • I get error messages from microsoft repeated that specifies the needs of microsoft windows to stop and I want to send an error message. Most of the time I send a.
  • I get the error message when you try to copy an album purchased from i-tunes, on a blank disc that something is wrong with my audio/video service does not properly or is not available.
  • I also learned today to buy or borrow a reinstallation of Windows XP Edition family drive, because I did not. I do? Help, please. Thank you.
  • The list is long, but it's for beginners. I don't have the money to take it to a store and need for some online business.

Hello

· What is the number and the model of the computer?

· Were there any changes made on the computer before the show?

· Who is the service pack installed?

Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

1. I suggest you try the steps listed in the link below: you cannot start the Windows Firewall service in Windows XP SP2: http://support.microsoft.com/kb/920074

2 run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

Tags: Windows

Similar Questions

  • very important email deleted my Windows 7 Live Mail account need to know how can I restore them? Thanks for any help.

    delete important emails from my account Windows Live Mail (Windows 7 service pack 1) - how to restore this file? Thank you.

    Rodger Melvin

    E-mail address is removed from the privacy *.

    Have you checked the items deleted in Windows Live Mail folder?

  • I would like to download a second copy of Lightroom 5 for a Windows-based computer.  Anyone know the link for this?  Thank you.

    I would like to download a second copy of Lightroom 5 for a Windows-based computer.  Is there a link to get the file?  Thank you

    Lightroom - all versions

    Windows

    http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

    Mac

    http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • Windows media player has encountered a problem when downloading the file. for additional assistance, click web help.

    Original title: unable to audio stream.

    Unable to audio stream, "windows media player has encountered a problem when downloading the file.  for further assistance, click web help' web help does not work, clicking web help does nothing (no response from program... a lot of negative response from me) stuck with the big pass... vista 64 bit... a lemon from the getgo... problem after problem...

    Hi Joseph,

    What is the file format of the file you are trying to download?

    This problem normally occurs when the Media player could not play the file downloaded or not supported.

    Method 1:

    Step 1: Here is the list of the formats supported by Windows Media player file:

    Information on the types of media files that supports Windows Media Player:

    http://support.Microsoft.com/kb/316992

    Note: See if the file format is in this list, if it is not there, you may need a third-party codec that can read the file.

    Step 2: For more information about codecs, see article given:

    Codecs: Frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

    Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Method 2:

    I also suggest you to run the Windows media player Fixit:

    Solve the problems of Windows Media Player video and other media or library

    http://support.Microsoft.com/mats/windows_media_player_diagnostic

    Hope this information helps.

  • I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

    I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

    I thought it would be FAFSA is causing your problem.

    Install Portable Firefox 3.6.x on your hard drive to a Web site. This will not affect any of your current Firefox installation.

    http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

  • I want to buy a legitimate copy for Windows XP. Would I be able to activate the new copy of XP?

    I want to buy a legitimate copy for Windows XP.
    Would I be able to activate the new copy of XP?

    Yes, you will provide that it is a legitimate copy that is already activated on another machine.

    John

  • reinstalled Windows Vista on a HP computer with a Dell reinstallation DVD.

    I have already downloaded all the HP software & drivers that I need to make it work like a HP., everything seems normal & tact except in the reception centre where it tells you all the details of your computer, it said its production is Dell & must say HP. The product key on the side of my computer is of course for a HP. Until it is recognized as a HP & not a Dell, I can't activate my windows with this product key.

    * original title - I reinstalled Windows Vista on a HP computer with a Dell reinstallation DVD. Now, I can't activate Windows because my product key will not work. *

    You'll have to contact HP and see if you can get a set of restore from HP for your system disks, you will not be able to activate the copy of Dell's Windows with a key to HP.

    "AnitaFatBowl" wrote in the new message: * e-mail address is removed from the privacy... *

    I have already downloaded all the HP software & drivers that I need to make it work like a HP., everything seems normal & tact except in the reception centre where it tells you all the details of your computer, it said its production is Dell & must say HP. The product key on the side of my computer is of course for a HP. Until it is recognized as a HP & not a Dell, I can't activate my windows with this product key.

  • Question about reinstalling windows on a laptop that came with it, but the hard drive failed and had to be replaced.

    OK, until recently, the hard drive of my laptop couldn't, and I had to replace, no biggie, I really care about this laptop in any case. Then I threw ubuntu top and let it go from there. But recently, I wonder, if I could get windows again for her, for free. I am sure that it is not under warranty, but I could go and check of 90 percent. I have no back ups for it because it was cheap.

    Additional information:

    HP Pavilion G6-2235us

    Bought in the United States

    Provided with Windows 8

    No backups.

    Yes, if the hard drive has been installed you can just catch a Windows ISO-8 8.1 is not available now and make an own Install.Then, if you have the sticker of the product key on the back of your laptop use the product key to activate. Devices with Windows 8 generally have incorporated in their BIOS product key and use the following tool to get the product key:

    Download the key tool produces OEM of Windows

    Then, you can use the key to activate. In the meantime, here is the link to download windows ISO 8.1 and generate the installation media

    http://www.eightforums.com/tutorials/18309-Windows-8-Windows-8-1-ISO-download-create.html

    Later you can improve Windows 10 too if you wish.

    Let us know if you have any other questions.

  • When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk". What's wrong? How to fix?

    When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk".    What's wrong? How to fix?

    I tried several times to remove the selection to burn and create a new a new but it keep "Windows Media Player has encountered a problem when burning the file to delivery" appears what should I do?   What problem is it?

    Hello

    1. what file format you are trying to burn?

    2. have you made changes on the computer recently?

    3. What is the security software installed on the computer?

    If it's something you downloaded, it may be copy protected by DRM, in which case you may not burn it to a CD or DVD.

    Here are a few things to try:

    1. make sure that the disc is clean.

    2. try a different brand of blank discs.

    3. stop all other programs that are running.

    4. make sure that the hard drive does not use disk compression.

    I suggest that you follow these steps and check if they help to solve the problem.

    Method 1:

    Try to use the Troubleshoot utility to see if that solves the problem.

    a. open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel.

    (b) in the search box, type "convenience store" and then click Troubleshooting.

    c. click on show all and then click the Windows Media Player settings.

    Method 2:

    Select a recording speed (write) more slow for the CD burner.

    Change settings for burning a CD or DVD in Windows Media Player

    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

    Method 3:

    If you have any third-party burning software, I suggest you temporarily Uninstall it and then try to burn the disc using Windows Media Player.

    Note: Reinstall the software after the trial.

    Method 4:

    Temporarily disable all programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

    I hope this helps.

  • Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

    Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

    Here's the situation.

    I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

    I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

    Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

    Thank you in advance!

    Maybe not...

    The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

    I looked at your system and found this article that you can read to see if it sounds like your original question:

    Windows Setup could not configure Windows on hardware on this computer.

    http://www.Dell.com/support/article/us/en/19/SLN293812/en

    Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

    Could you take the issue in the Dell online community where experts hang out (especially your amber light).

    Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

    http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

    The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

    If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

  • Have Photoshop Elements since 2001.  A new computer with Windows 7 Professional 64 bit.  It does work on my new computer.  Which version is MORE SIMILAR to the old version that I have, which will take place on W7P - 64?  Thanks for any help.  Popjer

    Have Photoshop Elements since 2001.  A new computer with Windows 7 Professional 64 bit.  It does work on my new computer.  Which version is MORE SIMILAR to the old version that I have, which will take place on W7P - 64?  Thanks for any help.  Popjer

    You should probably just download the demo version of the EP 12 and see if you can live with it.

    Download a free trial version or buy Adobe products | Adobe Downloads

    That being said, you tried to install PES 1 on your computer?

    How much free space is on your hard drive?

    You have Internet Explorer 10 or 11?

    PSE 1 can run on windows 7 x 64, if certain conditions are met.

  • Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

    I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

    Log name: Application
    Source: Application error
    Date: 21/07/2012 10:40:20
    Event ID: 1005
    Task category: (100)
    Level: error
    Keywords: Classic
    Description:
    Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.
    Program: For the Windows service host process
    File: C:\Windows\System32\wuaueng.dll
    Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.
     
    SOLVED!

    Hello

    Follow these methods.

    Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

    To save the c:\windows\system32\wuaueng.dll file, follow these steps:

    a. click Start, type run.

    b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

    c. When you receive the following message appears, click OK:

    DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

     

     Method 2: If this does not help, you can reset Windows update components and check.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  • "Windows Media Player has encountered a problem when burning the file to disk"?

    "I ENCOUNTERD CE WHEN BURNING YEAR MP3 AUDIO CD AND NOW I wanted TO KNOW WHY IT WON'T WORK THAT IS THE CODE POPPING up" Windows Media Player has encountered a problem when burning the file to disk ' WHAT CAN BE THE PROBLEM

    Hello MactabardX,

    I try and remove Windows Media Player and then reinstall it.
    Uninstalling and reinstalling Windows Media Player:
    Step 1.
    Uninstalling Windows Media Player:
    1. go to start and in the search type "Turn Windows willing or not.
    2. click on "Turn Windows features on or off".
    3. search for multimedia and uncheck the brand in the face of Windows Media Player.
    4 restart the computer
     
    Step 2.
    Reinstall Windows Media Player:
    1. go to start and in the search type "Turn Windows willing or not.
    2. click on "Turn Windows features on or off".
    3. find the multimedia functions and place a check mark in front of the Windows Media Player.
    4 restart the computer.

    If you encounter problems with Windows Media Player, try to use the Troubleshoot utility to see if that fixes the problem.

    Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

    If the size of the .wmv files is too large, it can cause Windows Media Player to stop working.

    I try and remove videos from Windows Media Player library and test to see if the size of the files could be a problem.

    If please reply back and let us know if these steps helps.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I have CS5 drives that were installed on an old laptop which is dead. I would like to reinstall this product on a new computer. I installed the disks on my computer, but I can't activate the product. Can you help me get a new serial number?

    I have CS5 drives that were installed on an old laptop which is dead. I would like to reinstall this product on a new computer. I installed the disks on my computer, but I can't activate the product. Can you help me get a new serial number?

    As far as I know, Adobe won't give you a new serial number

    Mac or Windows and EXACTLY what version of the operating system?

    Recent Mac AND Windows operating systems have been known to cause problems "weird."

    Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

    -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

    - and http://forums.adobe.com/thread/1038761

  • My current osx is the version 10.5.8.  I read the posts on this site advises users to buy 10.6 and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? Thanks for any help!

    I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8.  I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible?  I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!

    You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.

    (138456)

Maybe you are looking for

  • Satellite L459-136 - how James C data

    Hi guys,. I tried to download ten win on this old computer, it has 45% of free space on the C drive, but the download failed because it does not have enough space, so I thought I have a disc I have ever used I know that it contains data, recovery and

  • Hard disk backup

    I have a 3 TB 802.11n Wi - Fi Hard Drive Time Capsule on my iMac to 3 TB for backup which is full. I am able to connect to another external hard drive (say a TB 4 or 6) via the port Gigabit Ethernet to use a backup drive? Is there a better solution?

  • Question about the BCC emails

    I sent an email to someone using the BCC feature. They claim that they did not receive. When I go to my folder sent, is anyway that I can know if I entered a bad contact for ICC address?

  • HP Envy 4500 printer will we ' print half picture

    I bought a HP Envy 4500 printer today and I have problems printing, sending that one to the printer prints a little less than half page and then comes up with an error message saying cannot send the job "jobname" printer. I'm under Win 8 64 bit confi

  • driver for the w2558hc monitor problem

    I looked at previous posts and cannot find answers to the problem I have. I have a new HP Touchsmart Tx2 laptop, running Vista Home Premium 64 with memory 4gm. I just bought a HP w2558hc monitor. Attached to the Tx2 via DVI and USB provided. Oiginall