Appearance of desktop on startup

Similar Questions

• Control bar of the unknown Volume suddenly appearing on desktop Dual-Boot computers.

  Original title: 'Mystery' Volume Control Bar sudden appearance on desktop Dual-Boot computers.

  Good day, community:

  I'll do my best to make the question as concise as possible.  This is a real new for me.

  I dual-boot Windows 7 Pro & Windows 8.1 Pro on a 64-bit computer.  Each operating system is on another HDD (mechanical).  Yesterday, a control Volume unsourced bar began to appear on each of the separate workstations.  On the DT of Win7, this bar is displayed in the lower right region and hovers over the SysTray speaker icon.  On the DT 8.1 Win, it appears in the box to the upper left, similar to where the real system volume control appears when it is called.  Each of these 'mystery ' control bars will appear - and then disappear for a period of time.  Each control bar is flooded-out for the volume level of 100% and stays there.  Right click shows no drop-down menu to display the properties.  The control rods cannot be manipulated to adjust the volume levels.  When I view the actual systems Volume mixer and attempt to manipulate the volume level bar will adjust briefly but then floods automatically save the level of 100%.  I ran my anti-virus - full system scan - all readers - update Avast for free - and malware kit & root scan - MalwareBytes - but nothing does.

  The following may provide a clue.  The last program I have installed under the two O/S has been steam 'The Orange Box'. All components have been updated.  I disabled the Steam Client to bootloader program in each operating system using msconfig/startup and restarted.  The 'mystery ' Volume control bar continues to appear in the same areas described above.  I intend to describe the same question on the steam Forum community.  Thank you all for your time.  Any help/suggestions would be greatly appreciated.

  Hello Neal,

  Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

  Looks like NVIDIA High Definition Audio driver interferes with IDT High Definition Audio. Uninstall and reinstall the audio driver can help.

  Please let us know the results.

• I get a file sorttbls.nip on my desktop at startup is not found

  I get a file sorttbls.nip on my desktop at startup is not found

  Hi, Steviecaca,

  See the solution given here: file sorttbls.nip

  http://social.msdn.Microsoft.com/forums/en/Vsexpressinstall/thread/c32e9822-Edde-4407-804B-77ef77cefaf2

• Sound Activation module appears on desktop asks me to insert a disc.

  Sound Activation module appears on desktop asks me to insert a disc.  I don't know anything about it and you want to remove it completely.  How can I get rid of him?

  "Bill Reed21" wrote in message News: ee8de877-46ee-465b-9fcd-b6f7c734dc10...

  Sound Activation module appears on the desktop asks me to insert a disc.  I don't know anything about it and you want to remove it completely.  How can I get rid of him?

  You can uninstall Sonic - or reinstall it.
  He came almost certainly as part of the package with your OEM, I suggest you take a look at their support for assistance forums.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Thumbs folder appears on the desktop at startup

  Why an empty folder called "Thumbs" appear on my desktop, whenever my computer starts? How can I stop this?

  Hi Jgawth01Gawthrop,

  Follow the steps below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also run the disk cleanup utility to remove unnecessary files from your system. Disk Cleanup helps your computer run faster. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  To delete files using disk cleanup, follow the article below:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Hope this information helps.

• Junk folder appears on the desktop after startup

  When I boot xp home edition, a small window appears on the desktop called 'common' with a folder called 'drivers '. How do I stop this open window 'common '.

  Microsoft has me install SP 3, which did not work.

  Although it is easy to close, it's a pill

  Recognizing the help, has soon Rod

  Hello

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• I see a static box on my desktop after startup, windows xp

  This box appears in the upper left corner of the desktop screen

  Hi oceanu,

  1. did you of recent changes on the computer?

  2. you see that it is written in the static area?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• What should I do to keep my icon on the desktop foldersand startup disk

  I want to have the internal drive of the anomie of start-up of the files on the desktop. Currently, they are hidden. I use el capitan

  sfsinfoina,

  Have you tried to use the 'batteries '?

  https://support.Apple.com/en-us/HT201955

  To hide your HD, you can click on the Finder on the desktop and the Finder preferences and select which drives you want to appear on the desktop.

• Y580 screen flashes for a second, just before full desktop on startup

  Installed my Y580 with a new 128 GB SSD. The system is faster and more fluid now that before when I had only the HARD drive

  but I get a flicker on the screen after the Welcome screen and then the dektop appears as normal afterwards. has anone seen this problen / I saw on another forum and someone there suggested more than a year ago called F.Lux in startup which causing.

  any suggestions? don't want the screen to be damaed because of these random lights.

  in cover, there is a small delay (pause) on the screen of windows 7 where the four lobes come together to make the logo. (maybe one more second) any solutons? Thank you

  
  

• My computer is stuck in a loop-it starts, the Welcome screen appears, I click on my name and made it appear my desktop background, but not icons. It then saves automatically power off. I started using the safe, but it's still just the power loop.

  Windows XP is my operating system.  My computer is a desktop Dell Dimension 457.  I think I must have got a virus/malware.  Please help me to access my computer!

  First of all, open and print this article from Microsoft - http://support.microsoft.com/kb/555648

  East of the fault of the only thing that I can see the information about adding the userinit.exe line - they forgot to include a comma at the end of the registry key.  So this print and add a comma with your pen to ink so that when you return as a result of this document you will not forget to register.

  Now, do a search to find and download BART PE to create a BART PE Boot disk (boot from the CD-Rom drive).

  Before you create the BART PE Boot disk, download and install Spybot Search and Destroy.  Then do a update to get all the updates to ensure that you have all the latest definitions for Spybot.  When you create the BART PE Boot disk - make sure you include the Spybot folder you have just downloaded and installed.

  I think that if you download and install LavaSoft Ad Aware Free will take place as well. Just download, install and do the updates it as well... Be sure to include this issue as well when you create BART PE Boot disk.

  Now, once you have created with these extra utilities startup disk, boot from the CD.

  Change the registry as a result of the above Microsoft article.  To enter the registry once BART PE CD is loaded, click on the GO button and click RUN and type REGEDIT and press ENTER.  When the registry opens, click the HKEY_USERS.  In the menu, and then click FILE.  Then click LOAD HIVE.  Then navigate to C:\WINDOWS\SYSTEM32\CONFIG\Software - note: the software is the name of the hive file registry you want to open.  When it is open, be sure to give it a name that MyHive will work.

  Follow the rest of the Microsoft Article in the link above to change the registry values.

  Once you have finished editing the registry, go back and click on the name of MyHive, then click file and unload the hive before leaving.

  Once this is done, then go to the command prompt, navigate to the executables to run Spybot, let it find and delete everything it can.  Then, if it will run - run the executable file for AD - AWARE Free Edition.  Let find and delete what it can.  I don't remember whether or not AD-AWARE will run on boot CD.  I know that Spybot is going.

  I suggest you to start in safe mode with support for network at this point.  I had good luck with my problems in this way.
  I hope that it will arrive where you can connect at LEAST.  Once in safe mode with network support I would then suggest to go to www.microsoft.com/protect and going to the PC or the PC security, regardless of the title/link is.  Then perform a free scan with Microsoft One Care Live.

  ON CHANGE:

  Oh... also, in the Microsoft article, there may be the drive letter as the X: drive... won't talk down and belittle everyone and their intelligence... I know that some people can be so literal and making a mistake in following the instructions is not an indicator of intelligence... but the X: should be C: or what is the letter of your boot drive... I know that for most, if not all here is a given but would not be a mistake bonehead by someone...

  Thank you... and it will be useful...

• How to get rid of Yontoo Desktop of Startup Items

  How can I get rid of Yontoo Desktop of my computer startup items? I know it's adware... I have already uninstalled, scanned the computer with AdwCleaner with Super Anti Spyware (which is supposed to be removed), scanned and scanned with Malwarebytes. I already looked at this post, but I can't find the key in my registry: http://tinyurl.com/ktpublx

  How can I get rid of Yontoo Desktop of my computer startup items? I know it's adware... I have already uninstalled, scanned the computer with AdwCleaner with Super Anti Spyware (which is supposed to be removed), scanned and scanned with Malwarebytes. I already looked at this post, but I can't find the key in my registry: http://tinyurl.com/ktpublx

  see this
  http://malwaretips.com/blogs/Yontoo-desktop-exe-removal/

  (1) if there is anything to the system tray starts it disable...
  http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/

  or
  He looks through these two paths and delete it if found

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

• c:\WINDOWS\iweqevoyoxaj.dll message keeps appearing on desktop when starting up__it said that the specific module could not be found.

  On the desktop at boot

  This file was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Logo of Windows vista desktop on startup

  How can I remove the logo of 'Windiows Vista Starter' in my office?

  Hi Pao78,

  If you're talking about Windows Vista logo in the bottom right of the screen, follow these steps to remove it. It is called the desktop version or a watermark.

  1. Click Start and type regedit in the box start the search.
  In the results, right-click box on regedit and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue. It will open the registry editor.

  2. navigate to the registry key:
  "HKEY_CURRENT_USER\Control Panel\Desktop".

  3. click on the desktop; on the right pane, locate the DWORD "PaintDesktopVersion.
  4. right-click on it and select Edit.
  5 change the value to 0. Close the registry editor and restart the computer.

  -Value is equal to "0" deletes the Windows version of office.
  -Value is equal to '1' adds Windows version on the desktop.

  ================================================================================

  If the logo Windows Vista Starter is set as desktop wallpaper, follow the steps to change the desktop background.

  http://windowshelp.Microsoft.com/Windows/en-us/help/2959a6e9-4b0c-4e36-8d63-a15bd50b8f5f1033.mspx

  I hope that helps!

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• My menu desktop and Startup icons do not work.

  original title: icons gone AWOL

  Background: I am a regular user account and the administrator is protected by. We run Windows Vista Home Premium Service Pack 2.

  Concern: Desktop icons and start menu do not work properly. They simply open the interface 'open with '. I can get SOME their right of first programs and selecting "Start", but it is a bit tedious. The admin and another user on this computer are not affected by this problem. We're all stumped here and when I tried to use the Microsoft support site, it took no identification number.

  Advice?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Maybe the user account it is corrupt, we will try to create a new user account and control. You may need to use the administrator account to create a new user account.
  Reference:
  Create a user account
  http://Windows.Microsoft.com/en-in/Windows-Vista/create-a-user-account
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile

• menu dual boot Windows 7 windows xp appears not not at startup

  I installed windows xp on a 2nd drive hard as I have some software that used to run correctly run windows 7. Now I have windows 7 and windows xp installed on different hard drives. Windows 7 was installed first windows xp 2nd. My problem is that the windows start menu will not be displayed while I can choose the version of windows I want to start up. is there a way manually activate and add the entry with Windows 7 using 3rd party software, so that the select os menu appear on start up.

  Thanks for the information but I found all the info I had to download.microsoft.com/download/9/c/5/...8017.../BCDedit_reff.docx