Apple ID never works after doing so.

Similar Questions

• Pencil of Apple has stopped working after a few days

  OK, Apple (a wonderful device) pencil worked very well until I turned on the airplane on the iPad Pro mode. After turning off airplane mode pencil Apple has not re-couple to the iPad Pro. Thinking that the battery needs to be recharged, I attach to the iPad Pro lightening connector, but the pencil was not recognized what prompts the related message on the iPad Pro. I called apple and a number of tests have been carried out. Remote, a program has been run on the iPad Pro showing that its hardware components, including bluetooth work very well. Finally, apple recommended a complete reset of the iPad Pro to factory settings, which did not help. It seems that the problem is in the pencil of apple hardware. I wanted to share this experience because it might be useful to others, but also to see if anyone else has experienced the same problem and discovered alternative solutions.

  You may need to take your Apple pencil in your Apple store and ask them to replace it, is its not not matching the iPad properly or the pencil of Apple is faulty and should be replaced. As long as there is no physical damage shown on the pencil (e.g. damage caused by a fall) so you should be able to get a free replacement from Apple. I hope this helps!

• Mcupdate.exe does not work after doing the Startup Repair

  Good so I can't do a lot with Windows Vista Media center more. Internet TV is no longer in the main screen, the only listed programs are games, solitaire, purple place, etc. I went to thegreenbutton.com, and around the web and I can't find a solution. There is no restore point before that this error has occurred. Also, when I click on the "microsofts discovers online privacy policy", I get an error and windows is trying to find a solution. He always says to use windows update, but it can never find an update. The details are...

  
  

  Product

  Media Center

  Problem

  APPCRASH

  Date

  10/09/2010 01:55

  Status

  Solution available

  Description

  Stopped working

  Signature of the problem

  Problem event name: APPCRASH

  Application name: ehshell.exe

  Application version: 6.0.6000.16386

  Application timestamp: 4549b55e

  Fault Module name: DivXDec.ax

  Fault Module Version: 7.1.1.14

  Timestamp of Module error: 4bb651da

  Exception code: c0000005

  Exception offset: 0000a02f

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information about the problem

  Bucket ID: 1800569064

  Now, I did several complete analysis of malware and infections. I used Avira Ativir, Malware Bytes. Avira uninstalled and installed Microsoft Security Essentials. A ran the Microsoft Malware removal tool in safe mode, rebooted and went down MSSE quick scan and nothing was found.
  This problem is driving me crazy and I can't seem to find a solution.

  Reference:

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that another repair facility (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Travel in time Apple Watch stopped working.

  Travel in time Apple Watch stopped working after the update to WatchOS3. I hope that this useful feature has not been removed

  Hello

  Time travel is disabled by default in watchOS 3.

  To enable it on your iPhone, in the application of the watch, go to: Watch My > clock - turn on the trip in time.

• sound not working after hybernating

  Device Manager shows that there is no problem with the sound card or speakers. However, the noise stopped working after doing the interview running on Windows Vista. How can I fix it?

  Hello

  · What is the number and the model of the computer?

  · What service pack is installed?

  · Will there be any changes made on the computer before the show?

  I suggest you run the fix of the below link when sound does not work: diagnose and automatically repair audio playback problems: http://support.microsoft.com/mats/AudioPlayback/en-us?entrypoint=lightbox

  You can also try the steps listed in the link below: no sound in Windows: http://windows.microsoft.com/en-US/windows/help/no-sound-in-Windows

• Apple pencil does not work after update to iOS 9.3.4?

  My Apple pencil does not work after installing iOS 9.3.4, I tried to forget this device and it Peel again. No change, it still fails. Any fix for that?

  Never mind y ' All, I reset my iPad Pro and all works fine now. Weird, but as long as it works all is good

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Google search does not work after upgrade to 3.2.1 on 5

  Is there a fix for Google search does not work after the iOS 3.2.1 on iPhone 5 s

  Hi JRDriller,

  Looks like you may have some problems with the links on your iPhone. This problem has been resolved by an update to iOS software 9, the 9.3.1 update:

  Download iOS 9.0 - 9.3.1 Information

  https://support.Apple.com/kb/DL1842

  Hope that helps. If you still see issues after updating your software, could you provide more information on the issue?

  Thanks for being a part of the communities of Apple Support!

• Touch ID does not work after update iOS 9.3

  My TouchID does not work, after the iOS 9.3 update yesterday. Does not work to unlock the phone, or the applications that use it. I have disabled/enabled it. Re-installation of my fingerprints and no luck.  Restarting phone did not help either.

  Not done prior backup of phone to date.  And have not tried to make a backup and restore again.  Has been hoping a solution faster or better (and also wanted to report this problem).

  Any ideas?

  Have you tried a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

• screen capture on the iphone 6 does not work after 9.2.1 upgrade

  screen capture on the iphone 6 does not work after 9.2.1 upgrade

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Try to do a screenshot, once more.