Apple TV causes channel HDMI switch on our receiver

Similar Questions

• What is the best HDMI switch for use with Apple tv 4

  What is the best HDMI switch for use with Apple tv 4. I heard some do not work and the automatic switch has problems because Apple tv is still using power?

  I installed on a cutting and not because the automatic switch works because it isn't always. It came with a remote control that is almost as good, so don't mind the fact that automatic switching does not work well. The reason why I chose cutting is because it was the first device that gave me the good picture and sound quality with my AppleTV, the Xbox 360 and the PS4. (Don't ask!)

• It is possible to contact PCA9548A (8-CHANNEL I2C SWITCH) using USB-8451?

  Hello

  Now, I'm doing a project related to the smart battery. Now, I read data from a stack using the USB-8451 by smbus. The next step uses the USB-8451 casing to read the data of several batteries through smbus. I chose the PCA9548A (8-CHANNEL I2C SWITCH) to achieve this goal. But when I check the specification of the PCA9548A, there is a fix I2c format to read data from it, I tried several times, but still no can tell me where is the error in my code, or maybe it's impossible to communicate with this chip using USB-8451?

  Here is the fix that i2c read format of PCA9548A

  Why are you usng the script live? Have you looked at the examples of delivery for the 8451? You just need a couple of nodes property to set the rate and the address, and then use the VI to write I2C.

• Support of the 40L1353B channel HDMI Toshiba TV audio output?

  I thinking of buying a new receiver audio/video and notice that in order to have a connection to a cable between the receiver and the TV to support Audio Return Channel (ARC), which I believe is part of the HDMI 1.4 standard.

  I see no mention of this in the manual of the TV and wonder if anyone knows if it is, in fact, supported. I think that HDMI 1.4 is released in 2009 and I bought the TV in 2013, so it seems likely that he does, but I want to make sure before ordering the amp, I might have to order a SP/DIF, converter and cable and toslink cable otherwise.

  If someone could tell me if the TV does not support this, I would be very grateful.

  Thank you

  Well, I created my new AV receiver last night and everything works fine. My set-top box and Blu - Ray, Apple TV drive are plugged directly into the amp and the only thing that is connected to the TV is the cable from the HDMI output on the amp to HDMI1 on the TV.

• HDMI switches

  I have ComCast Xfinity and need to move to a X 1 box. I need to be able to connect to the X 1 AND my 3rd generation Apple TV to my my Panasonic HDTV age 13 who had only 1 HDMI port. Looking for suggestions for a selector HDMI 2 to 1 or 3 to 1 that is HDCP compatible and ha s a good EDID handshake.

  Consider this:

  http://www.Amazon.com/J-Tech-digital-JTD3DSP0301-wireless-adapter/DP/B00JQP6PTK? ie = UTF8 & keywords = j-tech % 20hdmi % 20switch &...

• Why didn't my apple remote causing interference with my other apple products?

  Why didn't my apple tv remote causing interference with my other apple products?

  Ex: pressing the buttons cause my Mac volume up and down, and also start random programs?

  It is not reached. Apple Remote can control Apple TV and Mac with receivers IR Out of the box. It is a behavior that is expected of them

  You can disable this:

  OS X Yosemite: pair and désapparier an Apple Remote

  Prevent your computer from controlled by a remote control

  1. Choose the Apple menu > System Preferences, click Security & Privacy, click general, and then click Advanced in the preferences security and privacy.
  2. Click on the lock icon to unlock, then enter an administrator name and password.
  3. Click Advanced.
  4. In the window that appears, select "disable the infrared receiver of the remote control.

• Apple cinema display DVI HDMI naar

  I have a monitor cinema display with DVI and Firewire USB 2010. I want to connect it to a generation of 3rd apple tv. A DVI HDMI adapter works for this?

  Thanks in advance

  Maarten

  I'm not 100% sure but I don't think it will work, the cinema display monitor is 16:10 so be deformed but if that was the case.

• Brocade M5424 Fibre Channel blade switch fiber?

  Hello.

  Im trying to support this Brocade M5424 switch blade Fibre Channel equipment and its load of the GBIC 10Gbs with fiber LC connectors. What type of fiber patch cord do I need to connect to another switch? I Googled it out and check it: LC LC PATCH CORD AQUA OM3.

  But my question remains... should I fibre om2 and om3 for the best connection quality?

  Could someone help me with this?

  Thank you

  OM2 and OM3 are assessed for 10 GB. 20 meters, you could run OM2 and OM3 and be able to achieve 10 GB. Here is a guide optical and cable with some information that may be useful.

  http://Dell.to/1XK4qHn

• Audio device of speakers HDMI switching on every startup

  So every time I restart or stop and restart my computer, windows switches my audio device on my HDMI output through my screen instead of my 5.1 speakers. Whenever this happens, I go into the control panel and set the default device to the speakers but it has no effect, it still happens when I reboot. the drivers are updated and I don't think that it has nothing to do with the speakers the only outputs are audio cables, but I can provide more details if necessary.

  It of not a big, but of course is boring. can anyone help?

  Hello

  Check out the link and follow the steps in the support article.
   
  Get high definition sound and music from your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-high-definition-sound-and-music-from-your-computer
   
  (The steps mentioned in the article also applies to Windows 7)

• Fibre Channel SAN / switch?

  can I use a 4200 ProCurve switch with optical modules to connect to a 3 host vmware SAN fibre channel?

  or I need to switch dedicated to SAN?

  My SAN is an Eternus DX80 with 2 fiber channel controller.

  Thank you too much.

  ProCurve's network switch.

  Data a switch needs dedicated, you can't mix and match network with data traffic.

• tvOS 10 update breaks DD5.1 on Apple TV output 4 HDMI

  Then, I upgraded tvOS 10 last night. Now, all the movies content on Netflix or iTunes won't play with audio when I output 5.1.

  I have my TV connected to a HDMI/optical splitter so that it can feed my Sonos Playbar. Prior to the update of the audio has been correctly be pulled the HDMI cable and divided optics 5.1 true, as stated in my application of parameters of Sonos. Since the update, I have to stereo to get all the sounds, which is so obviously not true 5.1.

  Someone else had this problem? Any ideas on a solution?

  Thank you.

  Try the Bike ATV power and sound systems. It is working for me with HDMI to TV and optical out to A / V receiver. It has no reason for the software of the ATV to make it different than before.

• Update to Apple TV causing 7.2.1 of network problems

  Hello

  Since the 7.2.1 update has been installed on my 3rd Gen Apple TV, I was not able to maintain a stable network via ethernet or Wifi connection.

  I tried to reset my base station Apple TV and Apple Extreme several times - this has resulted in the connection network briefly to come and then drop a few minutes later!

  Any help to solve this problem would be highly appreciated

  Thank you.

  Best regards,

  Kieran,

  Ireland

  I don't know how the ethernet connection may be unstable, unless the wire is broken.

  For WiFi, make sure your network using WPA2 - AES (CCMP) encryption, with no hybrid, no TKIP. And try to forget the network and enter the settings on the ATV.

  You can also check the updates on your preferred airport, but I don't know who.

• Old Apple ID causing problems in iCloud & find my Iphone

  I have a new Apple ID for the store. But my old ID is still operational when it comes to the iCloud and get my phone. So I can't reboot my iPhone.

  I do not know my old password + my old e-mail no longer works.

  What to do!

  Sorry, but without knowing the Apple ID and password that was used to set up the phone the first time, the phone can't be used.

  To change your e-mail address AppleID and or change the password, see this link:

  Find your Apple ID or reset your password

  Apple - Support - Apple ID

• I have ElCapitan10.11.5 of OSX.  PC send me attachments with "winmail.dat." Cannot open them. Support article sent Apple say PC what to change.  Why Apple can't make the necessary changes to receive these attachments?

  ElCapitan OSX 10.11.5. impossible opening "winmail.dat" attachments PC sending

  Apple says sender PC what to change.  Why Apple cannot make changes?

  Because the problem of side PC Mail configuration and is a matter of administration Windows mail server, not a problem in Mail OS X I have received emails with Apple Mail to those who use Outlook without any trace of winmail.dat attachment problems.

  You can get the TNEF free enough ask OS X App store that allows you to view these attachments until the administrator of Windows Mail comes out of his coma.

• Is it possible to have my iPhone 6 and Apple Watch both make a noise when it receives notifications?

  I have look under each setting and can't find anything. I work in an environment where the sound of watches is not quite enough to be heard, but my phone can be. Yes, I have a set of haptic at max too, but I want my phone to ring for notifications as well.

  Hello

  You can see that if you turn off your wrist detection (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection) it will make all notification alerts to be delivered to both devices. However, you will not then be able to benefit from features including Apple pay and one unblock after placing the watch on your wrist.

  If you want Apple to consider adding an option for notifications to be delivered for both devices regardless of the other settings (this option currently does not exist), you can suggest to Apple here:

  https://www.Apple.com/feedback/watch.html