Apple tv remote and my mac mini

I have recently set up a TV and use it for my mac mini, as well as my apple tv.  The apple TV remote seems to exploit both the apple tv and mac mini.  I'm trying to find a way to stop the operation of the mac mini remote control.  I matched the remote with apple TV, but it still seems to cause of my mac mini leave the sleep and open iTunes so I'm trying to browse my apple tv apps and look at something.

I checked the settings on my mac mini and is States there is 'no distance not matched' with the computer, then, how can I stop the operating distance of the computer?

Thanks in advance!

Welcome to the Apple community.

If you don't want to use a remote control with your computer, the best thing to do is just turn off the IR. (System preferences > Security > general, click on the Advanced button in the lower right corner - if the button is dimmed, click the lock icon and enter your administrators password)

If you want to continue using your remote computer, then you must match your remote computers with the computer AND the Apple TV remote with Apple TV.

To match a remote control with a device hold down menu and FF buttons together for six seconds or until you see an icon of the chain on screen (better take the computer in another room, or turn it off, when you do)

Tags: Apple TV

Similar Questions

  • If I buy the photographer package, can I install on my macbook pro and my mac mini desktop. Where can I get this twice, one for each?

    If I buy the photographer package, can I install on my macbook pro and my mac mini desktop. Where can I get this twice, one for each?

    Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

    -Windows or Mac has no importance... 2 on the same operating system or 1 on each

    -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

    -An individual account is for one person and may not be shared with anyone else

  • iPhone SE and 2009 Mac Mini server, 2.53 Ghz

    Greeting:

    I help my friend who has recently bought an iPhone SE 64 GB.

    Everything works well, this comes in place, iCloud, connect etc.

    He would like to use Mac to his back upwards and however,.

    When iPhone is connected via brightening cable, 2009 Mac Mini server: 2.53 Ghz, 8 GB ram, (256 + 128) fusion GB SSD Apple/Toshiba.

    Nothing happened - iTune does not see the iPhone.

    I went to 'about this Mac' - nada.

    I unplugged all USB devices - only iPhone was connected, try on all ports USB 5 - nothing.

    I tried 3 different cables - nothing either.

    Just curious if anyone had this problem?

    It was the first time I saw it.  However, it works on my Macbook air to 2013.

    Sam

    Start here:

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

    You need iTunes 10.8.5 or later for this version of iTunes.

    He charges?

  • Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

    Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

    If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

    Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

    Thank you!

    This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

  • Can I use a non - Apple 27 "monitor with a Mac Mini.

    I think of buying a Mac Mini.  I have a 27 "monitor, can I use this with the Mini?

    Yes, very, very little likely. You just need the proper adopter to match an entry on the monitor.

    The Mini of 2014 has a HDMI output and two ports Thunderbolt. The Thunderbolt ports support video output mini displayport.

    You can get an adapter mini displayport to HDMI, DVI, displayport VGA adopteur opt.

  • WRT320N and a Mac mini

    Recently purchased a Mac Mini and use it on my WRT320N wireless which I configured with a PC running XP. It works very well with the PC and has been since I ordered a few months ago. The Mac connects wireless; However, not feeling unwell. It takes up to 6 hours to download a file that only takes normally no more than 45 minutes to download it with the PC. It seems to be downloading for 5 seconds and then just sitting there for 10 seconds, up and down all the time.

    Help, please!

    Looks like your router is fine if the part of Windows works well. Looks like that the side Mac is not quite the same way as the part of Windows to install. If you haven't tried it yet, try to make a new 'place' on the Mac side and see if that helps. I think that I read on other forums about the connections of the weird problems and do not 'take', it seemed to work for some preliminary questions Macs with connections as well as.

  • Lightroom and 2014 Mac Mini

    I am owner of a mid-range Mac Mini 2014. I m wondering if she is able to properly run the lightroom. Its upgrade of my 2009 iMac which was not able to use lightroom.

    Hi matts48186169,

    Yes LR works perfectly on this system configuration.

    Concerning

    Rohit

  • problem of crash with 10 items and the mac mini lion 10.7.3

    because I download item 10 in mini mac lion10.7.3 my system crashing all the time. I have re installed adobe has no past. only solition until now to stop the mac and resart it again. and give me another job quick 30 min.

    I tried CS4 AND CS5 had the same problem.

    does anyone know an answer?

    Thank you.

    > then the whole system slows down and stops.

    The whole system crashing or hanging? If Yes, which is not an application, but it is very likely to be caused by faulty hardware. (it could be a bad driver or OS code, but those are much less common)  Apple still refuses that the problem is at the level of the material, until you ask a Manager or show them that the problem is at the level of the material.

    But since there is no way an application can hang or crash the entire system: it must be the material code, OS or driver.

    So you have a machine with defective equipment - bring - to Apple and tell them that the entire machine is crashing or suspended and they need to try to exchange the components to identify faulty material.

    In addition, please note that Adobe is a company.  Photoshop and Photoshop Elements are applications.

  • Can I connect a non-apple for my mac mini screen

    How to connect a non-apple for my mac mini screen?

    1. see #2.

    2. it depends on what type of cable the monitor has and the Mac mini ports; It is not a difference between an Apple and a monitor no Apple for this purpose. A Mini DisplayPort adapter allows to connect an older display until a Thunderbolt port.

    (142062)

  • Mac Mini and USB Logitech M510

    Recently bought a Mac Mini to replace the PC Installer.  The eyes using the mouse Logitech and the keyboard I've used previously.  The mouse is the M510, Apple sells on their site.

    If the dongle for wireless devices is the only accessory USB plugged in, they work perfectly.  If I plug another device... USB, printer or Apple's DVD player... the responsiveness of wireless devices become catastrophic.

    I also have the same problem that I have seen many other observations, the Mac Mini does not recognize my logitech USB devices once it enters a sleep state.  I see nothing in the energy save about turn off the USB ports.  My USB ports are defective?

    Mac mini (late 2014), OS X El Capitan (10.11.2)

    USB mouse uses 2.4 GHz, which can fight with wireless internet and will probably be lost.  May not happen, just say.

    USB ports only provide so much power.  You can get a powered USB hub (AC electric power provides 90 + % of the need for power devices) and the mac mini will just need to maintain communication with the hub.  Power loss could make the odd behvaior mouse, and the powered hub could allow many devices (mouse, printer, other USB drives, etc.) to have the USB-power of the wall instead of emptying of the mac mini.

    A decent powered hub can be had from BestBuy for $20.

  • Change the hard disk of 1.4 Ghz Mac Mini end of 2014

    Good morning Apple community, so here's the problem: I had a voltage breakdown because via the USB port of an EPSON LX - 300 printer, at present when the USB and the Mac Mini contact, ventilation Mac shutoff valve and after a few tries to do turn it finally do. But I see that a gray folder appears with an exclamation mark, then, with my other mac I download OS X El Capitan and do a Booteable USB, after that I enter the utilities disk and found that the "Macintosh HD" was not there and 2 USB 3.0 also didn't work. I picked up at a technical Service allow in my city and have told me that the HARD drive is broken and must be replaced, they say it could be replace by an of a 7200 rpm or 5400 RPM HARD drive RPM HARD drive, also says that couldn't put an SSD. I start research and found it is possible to put an SSD without problem. So my question is that's for sure, so I trust that an SSD will work with flawessly, and that I will also get a big performance improvement.

    My Mac is:

    Mac Mini end of 2014 1.4 Ghz 4 GB of RAM, Intel HD 5000 and a 500 GB drive HARD 5400 RPM death.

    So, my best regards to the community and hope for a response.

    I've been running my 2014 MM off an external SSD with USB 3.0 since the beginning of this year, after a bunch of trial and error; That's what I have:

    Unfortunately, I don't have much advice to give you else make sure you have a proper forum for IT. From my experience, the bad speaker will make the difference in whether or not the Mac recognizes the SSD on initialize toward the top.

    Good luck!

  • Mac Mini G4 (with Airport) as a server?

    Hi all

    I am new to this site and pretty new in the Mac world, and so I'm hoping to get help.

    I look and have a lot of video content, usually via an LG Smart TV or my iPad (using airplay) before the season holiday and for the last few years I had all my content stored on a 1 to Iomega disk (4 or 5 years) However, for Christmas, I received a Station sinology drive NAS that I put 3 2 TB Western Digital red. In the last two days I've been setting up a Plex account and it seams to work ok. However, if I play the files on the TV via my amazon fire stick that it dampens a lot - I suspect it's because synology NAS has insufficient processor speed to deliver the stream fast enough on television.

    Then... my thought is that I need a file on a network server (but I don't want to spend too much money) I as a woman who likes to think (especially my COMPUTER stuff) to be discreet and hidden away.

    In the House at the moment, we have 2 MacBook Airs, 4 iPad, IPhone 4 and a Windows 10 laptop (PC has no need to access the NAS or a potential server)

    I have a few questions:

    -Could you a Mac Mini G4 at low cost (the later model with the wireless capability) be used as a server (if I don't have the wireless version, I could put it next to the modem / router (it's a Virgin Superhub - NETGEAR VMDG480 I believe)-is this a better option?)

    If the answer is Yes and the Mac Mini can be used to do this work...

    -Can he work Plex and media files continue to be accommodated on the NAS

    -Once implemented can I use my MacBook to connect to the server and manage (i.e. must not be a keyboard, monitor, etc.)

    -Will what operating system take

    I have a little experience in configuring servers based on PC but that was a few years ago and things have changed since that time - more Mac seems to be somewhat different, so I would really appreciate help everything / all.

    Steve

    If the g4 as the old PowerPC CPU Intel version, you probably won't find as much work

    Plex media and Sin is no problem

    Remote desktop of course remote connection and vnc and teamviewer which would make it a possible

    What operating system would be up to the apps you will implement requirements

    A server is usually just a computer on which to run programs that are used by others on a network

  • Dell UltraSharp U2415 & Mac Mini (model end of 2014)

    I just bought a Dell UltraSharp U2415 monitor and a Mac Mini (end of 2014 model) and am looking for help on how to connect them to benefit fully from the 16:10 report. As I understand it, if I'm going to hdmi to hdmi I get 16:9-1080 p.

    I opted for 16:10 model so I can get a little more vertical screen space. Thank you for any assistance that you can pass along.

    Unfortunately, Dell does not validate the test / this model of monitor on Apple, ports and software hardware. For this reason, Dell has no troubleshooting steps a lot to offer. You can post on the Forum of Discussions Apple and see what they say. But the resolution and appearance are both depending on the video source. In theory, you should use the CDM to crush on the Mac Mini.

    Mac Mini Tb/CDM on--> U2415 mDP to DP--> DP U2415 cable in

  • External graphics (Mac Mini)

    Hey, I recently got into graphic design and am looking for an external graphics card. I did some research and heard, that it is possible to use an external graphics card which crosses the thunderbolt port. I watched some cases and adapters to do and comes to the conclusion of them being too expensive, as I will not be able to afford something that works. So I tried to find a way around it and found this solution. I would be grateful if anyone here who has a little more experience than me to tell me if this will work.

    I worked on that I could get a USB 3.0 to mPCI_e converter and then plug the USB 3.0 adapter Thunderbolt and my mac mini.

    I am aware that this will probably not work and so would welcome any suggestions you have. I know it's kinda a stupid question, but I have very little experience to work it myself. Having recently bought the my mac, I do not seek for a new PC, but I need some sort of solution since I was worried about the health of my mac, since it works mainly on high temperatures.

    I use the middle range 2.6 GHz Mac Mini end of 2014.

    Thanks in advance.

    Yo mean by "my mac because it runs mainly on high temperature?

    Currently I'm not aware of any way to run an external graphics PCLe card that appears via the graphics PCLe card output. If you could graph out of the map would probably slow PCLe being much faster than the USB3 or love at first sight. There might be ways to use cards to use the graphics PCLe card for purposes of calculations, does not aim

  • my apple tv remote I want to turn off

    I have an Apple tv remote and I don't know how to turn it off, I have to disconnect?

    There is not power off unless you unplug, but there is no reason since it consumes little power. You can put it to sleep through settings

Maybe you are looking for

  • Cannot remove the zombie apps. Help, please.

    For some reason, I still stand alone apps for Square (portfolio) and Fandango which are grayed out on my iPhone 6 s and do not appear in the list of parameters/storage. I'm unable to install because they don't exist anymore and when I try to to jiggl

  • Equium M50: 2200BG WLan - unable to connect to the internet

    Equium M50 / wireless 2200BG Pro / Wireless eircomNETOPIA router 1642 4640 eircom Hello I have Aproblem with my wireless connection When I go to network connection I have 3 parts: 1-broadband: inside there is a connection to broadband in disconnected

  • Is it possible to control the number of items in queue reading

    Writing data in the queue follows the format of (Data length) + data block + (length of the data) + data + (length of the data) + data block When I read the data, need to read the length of the data first, then can read a block of data. Is there any

  • Charger for Acer Iconia A700

    Hi, I broke my charger for Acer iconia a700 but I can't find anywhere on the internet so pls tell me where I can find it? Thank you

  • Windows XP stops by a complete analysis of the system

    Under Windows XP. Whenever I try to run a full scan of the computer system will stop. This occur during execution of Microsoft and Norton full scan of the system. Must unplug computor and reboot several times, sometimes over an hour so he could resta