Applets admin does not not with Webcenter content 12 c

Similar Questions

• Why Safary does not load the content of pages?

  Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.

  Sorry if my English is not good, I am a Brazilian who is still learning English

  Your English is very good!

  Redirects are usually due to adware or malware.

  Download the run MalwareBytes.

  It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.

• When you open an e-mail sender name is here and email does not display any content.

  I opened an email with content, but reading the advertisement youtube poped upwards and a small window asking if I wanted to block it, and I did. After that, I get important emails from my Bank and my friends who doesn't display the sender's name, but does not show the content of the email... email is empty. How can I unlock so I can see the content of the emails?

  [Moved from the community centre of Participation]

  Hi Don: Thank you very much for your quick response.

  My son has fixed the problem I had with my Macbook emails not showing their content.  He clicked on a little left hand (AdBlock icon) located the bar where I write the links I want to explore. For him, it was very easy, but last night I panic when I saw my emails that had no content.

• CD\DVD player does not display the contents of the data DVD.

  CD\DVD player does not display the contents of the data DVD, but will display the content of the data CD.  What is happening on more than one PC, and it began when Active Directory GPOS have been applied for the PC.  If untying policies the problem persists.  What happens on DVD ROM and DVD RAM drives.  Scanning software has been added to these machines, think it might be an ASPI crush.  All these machines are XP SP3 running McAfee.  When you insert a DVD with data on this topic, the name of the drive in windows password DVD RAM drive to CD drive, and if you try and browse the DVD it displays as a blank CD.  I changed something on the PC with the policy but cannot understand what he.  Other identical PC can view the contents of the DVD very well, but they never had the same strategies.  Any ideas, thank you.

  Hi PDoneen,

  The restore of the system; restore the computer to the before date when policies have been launched on one of the affected computer.

  You can check the link for the steps below: how to restore Windows XP to a previous state:http://support.microsoft.com/kb/306084

  Post back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Video playback device does not support protected content playback.

  It is a system with tuner via SiliconDust HD Homerun first.  QuickTV works very well.
  The temporary fix was noted by optimizing and reducing the WMC window temporarily fixed direct reception of TV tuner.  You are looking for a permanent solution.
  More in detail about this problem with DRM can be found here:
  http://www.Silicondust.com/forum2/viewtopic.php?f=41&t=13923&p=85683#p85683
  and here:

  http://www.thegreenbutton.TV/forums/viewtopic.php?f=5&t=3760&p=36116&Hilit=the+video+playback+device+does+not+support+playback+of+protected#p36116

  Have tried all of the above tactics.  Still not play a "Update Ready" on step 14.
  Any ideas what I'm missing here.  Windows 8-64 bit Pro with the Add on WMC.
  Also, I must say that I am very disappointed that MS has taken to "Stay on top" setting to keep WMC above other windows version Win8 out.
  What could be the reason for this?  Forces to some third-party utilities user / app.
  1. the error message was in my topic:
  "Video playback device does not support protected content playback.

  2. the excruciatingly detailed troubleshooting steps are listed in the links that I showed in my post.
  In any case, after trying a bunch of stuff and you try to reset the DRM / play ready through my above links, I made the point #1 as shown in the instructions below:
  http://support.Microsoft.com/kb/976590
  For some reason, this protected download digital file and update of WMC to play this sound file now seems to have fixed the problems that I had the problem of "video playback device does not support protected content playback.
  Really a frustrating thing.
  I had some problems with the installation of a driver from chipset for a new motherboard, I had to install and it seemed pretty hardware changes to have upset the loan play in my Win8 - 64-bit Pro installation.
  In any case, looks OK now.

• My addons page does not appear any content or text

  Hello
  My addons page does not appear any content or text.

  Snapshot is in the link given below.
  http://I57.Tinypic.com/2vwek3n.PNG

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press Alt or F10 to bring up the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

  Then restart.

• Run as admin does not

  Run as Admin does not (UAC active), I get an error that says: Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  My account is admin and I still get this problem.
  If I disable UAC and then I still get the error.
  The strange thing is that when I restart my computer run as Admin works once, then stops again.

  Also if I right click on an exe which requires administrator privileges and then he rowed for a while, then opens the menu, but any other exe opens the menu immediately.

  Hello

  I suggest you try the steps from the following link:

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• Error IBR with Webcenter content cluster

  Hi all.

  I am using oracle webcenter content 11.1.1.6.

  When I configure single IBR with content unique webcenter work but error with webcenter content cluster.

  It generate the image but image not found link and nolog access.  I don't know why.

  Thank you all.

  Hoan

  I solved my problem. Just change the file format of ImageThumbnail to the design of digital media. It's in my tie.

  But I want to configure failover for the BOVINE infectious rhinotraecheitis servers managed

  I read the note 1209496.1.

  I tested 2 ibr managed server may not run on a machine.

  Following this remark ibr cannot cluter-active but may switch.

  UCM_server can configure the cluster. After that UCM_server can configure provider with IBR 2 managed servers in 2 machines.

  If IBR first managed down, UCM server can connect to the second server managed IBR to work.

  Am I right?

  Hoan

• Web SSO SAML 2.0 with webcenter content

  Hi all

  We have a requirement to set up the profile of SAML 2.0 Web SSO for Webcenter content server. SAML 2.0 certified against Webcenter content? I couldn't locate the documentation for the configuration of SAML 2.0 with Webcenter content.

  Any help would be appreciated.

  Configuration

  LDAP: AD and ADFS 2.0,

  SAML 2.0.

  WebCenter content 11.1.1.8 (UCM)

  Kind regards

  Shan

  Hi Shan,

  SAML is not currently supported with Webcenter content.

  Thank you

  Srinath

• Admin does not count completely administrator

  Hello

  I just do a fresh install of the latest version of Mac OS X (10.11.4) yesterday and I set up all my accounts, applications, plugins, etc.

  I met a problem when I wanted to install my VPN client. The installer would not lance. I contacted their support and they suggested that my account privileges were defective. I had to do a second admin account and try to run the installer it.

  I tried this and it worked! The installer would launch as it should. This means however that my first created account (created when you set up when you first start) is broken and not completely an admin from my laptop. The check mark from the admin is checked in the settings of the system, but apparently due to a bug I am not allowed to run .pkg installers or authenticate the VPN client to change my network configurations. When I get the pop-up to enter my password it just comes back. I also tried to use the account name and the password of the second account, but it does not work either.

  I could move all my stuff on the newly created account, but that would mean I have to reconfigure everything. It would be very boring, because I did all this and it's a lot of work.

  Someone here who has the same kind of problem? Or someone who knows how I can get my return permissions, or use the second account to authenticate the changes?

  Thanks in advance!

  Henk

  PS: I use a Macbook Air, mid-2012, 256 GB SSD, 8 GB RAM, i7 processor.

  I came across administrative accounts that are damaged over time, and while there might be ways to fix permanently, I don't know if these solutions work in the long term. My experience with this is all first what you did and what you're doing now are reluctant to do, which is migrating from the old account to the new as it will deal with any problem hiding maybe you will see down the line.

  What do not stress is that you creat now with Time Machine before performing a backup if you have not already

  migrate the old account to the new, then delete the old account and make an archive of it.

  reboot into the new account

   > Preferences system... > users and groups

  Select the old account, tap on ' - '.

  Follow the prompt to make a copy of the account when it is deleted.

• software installed as that user admin does not work when logged in as standard user

  Running a desktop computer dell with XP SP3 home edition with no possibility of wifi

  Bought the USB adapter wireless and successfully installed the software and connected to the router connected as a user with administrator rights. When I connect software standard user being their but does not connect to the router. ? Standard user family security enabled, I disables it, but it makes no difference.

  Thanks for your suggestion, yes tried and it works when I connect as long as the user admin with a password even if I'm in the standard account. However he does not remember the settings, so whenever you access the standard account you must connect as admin users that would amount to giving the password to the admin of my grandson who defeats the object to have its own user account.

  But I solved the problem, when I looked in C:\documents and setting\admin data User, I found the folder for the software with an ini configuration file and a profile ini file. The profile ini file was missing in the same application for standard user folder. When I copied the file across and made a minor change to the standard user configuration ini file is the file of users admin everything works fine

• Need expert help! CD player does not read the contents of the disc. Help!

  I searched and tried everything what we can imagine and impossible to find a solution. I can also restore because I don't really know this error at startup. Here are the symptoms and fixes I've tried. If there is someone out there who could help me it would be greatly appreciated!
  

  System:, I have XP w/SP3 installed. Dual-Core 3.0 G w / 3G P5N72T - MB Ram, HD 300 G, Asus CD/DVD Drive.

  Symptoms:

  • I had my CD player connected via PATA ribbon cable and my hard drive connected via a SATA cable.
  • My CD player will not autorun when an installation disc is installed.
  • My CD player will not read or display the contents of the disc when I use the file Explorer.
  • My letter of CD drive is D:\ and always appear as one of the discs.
  • When I use the command "run" and type: D:\install or D:\setup a windows "disk is not formatted" error appears stating "Windows is unable to read the disc. The disk might be corrupted or it could be in a form that is not compatible with windows.
  • My Green CD player will sweep on and I can hear it turn every time I try to explore the files or after I insert a disc, but she never autoruns, or displays content.
  • I decided to buy a new SATA CD drive and installed, unfortunately it does not work either exact problems remain.
  • I have two CD drives to another computer and they both work. So I know this isn't the disc or the lens.
  • I ran the utility Microsoft Fix It and she finds nothing wrong.
  • I ran the TweakUI to make safe autoplay features are on.
  • I did all the registry fixes proposed by microsoft and online forums. i.e. upper and lower, filters etc.
  • I removed the device from Device Manager and reinstalled.
  • I ran a virus, spyware, malware, and everything is clean.
  • I have the latest version of the system bios and all settings are fine. Most are on Auto that are associated with the detection.
  • Type of device DMA modes are selected in automatic detection.
  • If I could read a disc that I could try to reinstall windows XP, but it is not an option now until my CD player is fixed!
  • I don't have any installed like Nero buring CD software.
  • I actually installed Nero Light to see if it would read a disc, and of course I can see the disk and copy its content to my hard drive or take an image of the disk.
  • I tried to rename the drive, disconnect the drive.
  • I'm sure I tried other things, but can't remember right now!

  Thanks for your help in advance!
  Mike

  Hi msavage2000,

  It seems you have tried most of the steps to solve this problem. However, we would like to know if the drive does recognize the drive?

  As we know readers work, I would like you to try a new PATA/IDE cable and check the result.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP Professional SP3 recognizes D DVD/CD-RW drive in my computer, but does not read the content.

  Control Panel indicates that the COMBI RW16x10/DVD unit. Properties indicate that a new disc has no free space.  Does not read CDs or DVDs with the content.  All indications from the Panel indicate that "device is working properly", but I can't read anything. Updated and modified drivers and troubleshooting I tried without success.

  Troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Please click on the link below and follow the steps as indicated on the page. This should solve the problem.

  http://support.Microsoft.com/kb/321641

  MD MOEEN AJAZ KHAN (MCP)

• Applet JIT does not

  Hi team, Okay, so what we have observed in our network is that flow-export sometimes causes high interface utilization and as a workaround, we remove and re-add flow export commands. Now there are short burstd of traffic as well, so I want to add a condition where "burst happens 3 times in 60s, then trigger the event". As I cannot test in production router, so I am testing on a lab switch and there is not much traffic on it. txload/rxload is 1 and hence my applet looks like this: sw1-trn-mr3.hyd.shaw.net#sh run | b event manager event manager applet test authorization bypass event tag 1 interface name GigabitEthernet0/4 parameter txload entry-op ge entry-val 1 entry-type value exit-op lt exit-val 1 exit-type value poll-interval 10 event tag 2 interface name GigabitEthernet0/4 parameter rxload entry-op ge entry-val 1 entry-type value exit-op lt exit-val 1 exit-type value poll-interval 10 trigger occurs 3 period 60   correlate event 1 or event 2 action 1.1 cli command "enable" action 1.2 syslog msg "Interface utilization has risen again. " action 1.3 cli command "show proc cpu | append flash:test" action 1.4 cli command "show interface GigabitEthernet0/4 | append flash:test" action 1.6 cli command "show ip cache flow | append flash:test" action 1.7 cli command "show tech | append flash:test" action 2.2 cli command "no ip flow-export source GigabitEthernet0/4" action 2.3 cli command "no ip flow-export destination 192.168.1.1 2055" action 2.5 cli command "ip flow-export source GigabitEthernet0/4" action 2.6 cli command "ip flow-export destination 192.168.1.1 2055" action 2.9 cli command "end" ! end The thing is it does not work. I turned on debugs and I see this. Mar  3 15:30:46: fh_send_intf_fd_msg: msg_type=114 Mar  3 15:30:46: fh_send_intf_fd_msg: sval=0 Mar  3 15:30:46: fh_send_intf_fd_msg: msg_type=114 Mar  3 15:30:46: fh_send_intf_fd_msg: sval=0 Mar  3 15:30:54: fh_fd_intf_process_async Mar  3 15:30:54: fh_fd_intf_param_fetch:I/F=GigabitEthernet0/4 txload=1 Mar  3 15:30:54: intf_value_uint_compare:op1=1 op2=1 ret=TRUE Mar  3 15:30:54: intf_entry_value_check:Returning TRUE Mar  3 15:30:54: fh_fd_intf_event_match: re = 0x5849AA0, num_matches = 1 Mar  3 15:30:54: fh_fd_intf_start_poll_timer: start_t=10000 Mar  3 15:30:54: fh_fd_intf_process_poll_timer: update_t=0 Mar  3 15:30:54: fh_fd_intf_param_fetch:I/F=GigabitEthernet0/4 rxload=1 Mar  3 15:30:54: intf_value_uint_compare:op1=1 op2=1 ret=TRUE Mar  3 15:30:54: intf_entry_value_check:Returning TRUE Mar  3 15:30:54: fh_fd_intf_event_match: re = 0x56D793C, num_matches = 1 Mar  3 15:30:54: fh_fd_intf_start_poll_timer: start_t=10000 Mar  3 15:30:54: fh_fd_intf_process_poll_timer: update_t=0 Mar  3 15:30:54: fh_send_intf_fd_msg: msg_type=64 Mar  3 15:30:54: fh_send_intf_fd_msg: sval=63 Mar  3 15:30:54: fh_send_intf_fd_msg: msg_type=64 Mar  3 15:30:54: fh_send_intf_fd_msg: sval=0 Mar  3 15:31:04: fh_fd_intf_process_async Mar  3 15:31:04: fh_fd_intf_param_fetch:I/F=GigabitEthernet0/4 txload=1 Mar  3 15:31:04: intf_value_uint_compare:op1=1 op2=1 ret=FALSE Mar  3 15:31:04: intf_exit_value_check: re=0x5849AA0, returning=FALSE Mar  3 15:31:04: intf_exit_comb_check:Returning FALSE Mar  3 15:31:04: fh_fd_intf_event_match: re = 0x5849AA0, num_matches = 0 Mar  3 15:31:04: fh_fd_intf_start_poll_timer: start_t=10000 Mar  3 15:31:04: fh_fd_intf_process_poll_timer: update_t=0 Mar  3 15:31:04: fh_fd_intf_param_fetch:I/F=GigabitEthernet0/4 rxload=1 Mar  3 15:31:04: intf_value_uint_compare:op1=1 op2=1 ret=FALSE Mar  3 15:31:04: intf_exit_value_check: re=0x56D793C, returning=FALSE Mar  3 15:31:04: intf_exit_comb_check:Returning FALSE Mar  3 15:31:04: fh_fd_intf_event_match: re = 0x56D793C, num_matches = 0 Only the first time, it returns TRUE. After that, it returns FALSE always and hence the condition "trigger occurs 3 period 60" does not match and hence no event is triggered. Where am I going wrong? Appreciate your help on this.
  
  Thanks.

  You have a condition of release of ' lt 1.  This means that the burden must fall below 1 until the event to rearm.  In this case, it seems that the load is always 1, so you will not see the three events occur.  You have to push some of the traffic through this interface to complete your test.

  In addition, you are away:

  Action 2.1, cli «config t» command

  And probably, you will need to extend the first event with a maxrun parameter I am sure that this policy will have more than 20 seconds to run.