I have little problem with my disk utility.

Similar Questions

• Pavilion G7-1328dx: I have a problem with recovery disks

  I have recived a message error (error bios 501) was one that says windows could not start at this point I did a system restore, it worked then it instaled updates and when I turned it off it seamed ok a few days elapsed before I go back and it didn't start so I tried to do the same restore point who had worked but im guess I chose the one bad because after that I could get in the bios for the test command and start system and info windows recovery tool not forbear even so I am really crazy and just ordered the HP recovery disks have tried a couple of times he says it didn't I saved a copy of the details , but I don't know how to open it so I can copy and past I also tried putting it in a windows disk because I realized that one problem I had is a new hard drive my boyfriend out the HDD without asking and wiped it and put it in his laptop, my friend was helping me with the laptop, but cannot stop now can someone please help

  Assume your drive recovery is ongoing demand... because the 501 error has not might be related to your operating system... or the hard drive...

  Maybe think I didn't read clearly on your description, but it seems that you already have recovery files broken, or the HARD drive is on form, no? Suggest that you call service help find someone help on data recovery. If the HARD drive has already been fomatted, it will take a few HARD drive recovery professional technician to do this action, using special equipment or tools. Sometimes it can get the restored data sometimes it breaks down, according to the State of the HARD drive. If he's already got formatt low level, it would be very unlikely to recover data... Then... you'd call better help service. Hope you can recover data.

  If you have already saved data I just re - install the operating system. It is easier. Alternatively, you can call the service provide the recovery disc number (printed on the label on the disc) see it's the right disc for your device. And try to use the right disc for re-installing.

• I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

  I have a problem with the canon 5dsr with Lightroom 6 connection

  I can't drop images directly in Lightroom

  The camera connected only by EOS utility

  Help, please

  Hi mateuszm,

  You cannot drop images directly in Lightroom.

  You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

• I have a problem with the key, I aktivate Photoshop CS 6 after buying fo little years. But the drive hard ist crasht a moment the aktivate display the error. Please you can reset the key?

  I have a problem with
  the key, I have aktivate Photoshop CS 6 after buying fo little years. But the
  Drive hard ist crasht a moment the aktivate display the error. Please you can reset the
  key?

  Hi berndp3095653,

  Greetings.

  You must contact the customer as some changes to do on the backend

  Contact the customer service

  Concerning

  Rohit

• Satellite A200-1VD: problem with HDD disk

  Hi friends;

  I'm sorry for my bad English:

  I have a problem with my * satellite A200-1VD *, I had with Vista Home edition 2 years ago license. I want to format it, * but I don't have a DVD restore disk * ([http://img96.imageshack.us/img96/5339/discv.jpg]). For this reason, I installed "* TOSHIBA Recovery Disc Creator *" ([http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]), but when I run it, * it does not recognize the HDD * and sent me the following message; ([http://img139.imageshack.us/img139/4445/resultattrdc.jpg]). in the second time, I installed "* Recovery Disc Creator *" ([http://img199.imageshack.us/img199/3197/rdcm.jpg]), but it does not recognize the drive too and sent me this message. ([http://img199.imageshack.us/img199/995/rttrcd.jpg]). I do not know how to this problem that * bothers me too well *. Too I would be grateful if you can help me to overcome this problem.

  Don't forget to see the following pictures to understand my problem.

  * - [http://img96.imageshack.us/img96/5339/discv.jpg]
  * - [http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]
  * - [http://img139.imageshack.us/img139/4445/resultattrdc.jpg]
  * - [http://img199.imageshack.us/img199/3197/rdcm.jpg]
  * - [http://img199.imageshack.us/img199/995/rttrcd.jpg]

  Thank you very much

  Hello

  At first was a little bit the theory for a better understanding.

  In the latest Toshiba delivered recovery facilities DVD discs with all the new models of laptops. "" Since then, I think, two or three drives of years facilities are not part of the package and recovery image is saved on the HARD disk and the recovery disc can be created using preinstalled "Toshiba Recovery Disc Creator. This recovery image is not saved on a separate recovery partition but on the second partition of HARD drive (data partition E) in the folder called HDDRecovery.
  The screenshot on 1.5 GB WinRE partition has therefore nothing to do with the Toshiba recovery image.

  This creation of recovery operation may work with the factory only settings. with other words, if you change the partition structure, or if you deleted this folder HDDRecovery you won't be able to create the recovery disk or install the operating system using HARD drive recovery option.

  I guess that you do not have this folder HDDRecovery more and because of this, Toshiba Recovery Disc Creator starts with error message. This tool needs direct access to these data recovery to create the drive recovery facilities.

  I think all this bother you much, but it's your fault. Reminder with the trace message is preinstalled on each Toshiba notebook with HDD recovery:
  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is severely damaged.*

  What you can do now is to order the new original facilities Toshiba drive under https://backupmedia.toshiba.eu/landing.aspx or you can use the Microsoft installation for the installation of the OS disc. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  If you have any other questions please let us know.

  Bye and good luck.

• L20-101 problem with bootable disks

  Hello!

  I have a problem with bootable discs. I try two disks bootable, that have been successfully tested before in other systems, but my L20-101 does not start with them.
  After the startscreen, there is just a white screen.

  is this a general problem with the L20-101? the installation of the update of the bios to version 1.80 had no effect.

  does anyone have a solution?
  Thank you

  Hello

  The boot disks you are using?
  Have you tried to start with other drives for example with the delivered Toshiba Recovery CD or the original CD of Microsoft Windows?
  It would be very interesting to know if there is a problem disc or unit.
  Please check if pressing the C key allows you to boot from the drive.

  Good bye

• Have a problem with the Windows XP where he did not finish the boot.

  Have a problem with the Windows XP where he did not finish the boot. Ran remote console and @ the c: > guest tried to run chkdsk/r/p and received the error message "invaild drive. I put the drive in the argument?

  Hello Tmagic,

  Thank you for your message.  The correct format is below:
  chkdsk volume: (switches, e.g./r/p)
  
  
  example: chkdsk c: /r /p
  
  
  If these results find but cannot fix all the mistakes, you can also check with the manufacturer of your drive and possibly download a utility that will check the errors and repairs.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner

• I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer.

  Original title: scams?

  I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer. Normally, I just say that I don't have and hung up. Today, I took a little further and he said that they discovered that I had loads of malware/viruses etc and that they could identify with them. I was obviously very suspicious because he seemed to have my correct Windows ID number and with care on 'Run' he told me to type things like cmd eventviewer and inf where he referred to a file 1394.pnf. I stopped while he asked remotely to access my computer. However, I got a phone number 01916450337 and his P786000 id I noticed that many people are posting on your forum-is this another one of those scams?

  Continue to put the phone down. They are all crooks.

  They get you to open Event Viewer, because there are words such as 'critical' and 'error' along the this.

• I have a problem with my HDD to fill without no reason.

  I have a problem with my HDD to fill without no reason.  I should have about 340 GB free and it reads now only 18 GB free.  Can I have found the culprit (Revo Uninstaller Pro) because he stop to fill in after I removed it.  I can't find where all the "whatever" went.  I don't see anything funny in the registry and cannot find the strange files on the C drive under computer.  I wouldn't mess with the registry too but I as I am limited in my understanding of what's there.  I scanned the hard drive with my Avast Anti Virus and the Microsoft Emergency scan engine and found nothing.  If someone could give me an idea of what happened and how to get my rear disc space, I would be grateful.

  Avoid Revo Uninstaller Pro software type (including the registry cleaners "" and system optimizer).
  Programs and features does the job quite well.
  -There is no advantage to playing in the registry.

  -First run Disk Cleanup defragment the HARD disk in order to have a 'clean' basis of work form.

  -Treesize will show exactly what is there and how much of it.
  http://www.Jam-software.com/treesize_free/

  -Check how much space is used by System Restore.
  Restoration of the system- How do I

  -Indexing research is supposed to implement a very large file as well. You can limit where it indexes
  or turn it off completely in - Control Panel > Indexing Options
  -Check there is no software constantly writing/rewriting something. These activities have
  view in Task Manager-process.

  -Have another look through programs and features and see if there is has than nothing installed, you
  do not use or need and to uninstall, but software doesn't generally use a lot of space.

  .

• I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large

  I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large RAW from a Canon 5 Ds R. What should I do?

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  Hello, I have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please?

  jasonf18090788 wrote:

  I saw on the Adobe site that the video card is compatible with AE Pr, but not work.

  Where have you seen that? It is not on the list of the AE: system requirements | After Effects

  Keep in mind that After Effects uses only the GPU for one, outdated thing. GPU very little matter for AE. See this: features GPU (CUDA, OpenGL) After Effects CS6 and after effects CC

• I have some problems with the Flash cs6 work

  I have a problem with my game when I created it using adobe flash cs6

  When the duck strikes the screen, from right to left as it shows

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  Duck / ducksmove)

  at flash.utils::Timer/_timerDispatch()

  at flash.utils::Timer/tick()

  This is the code so please help check that does not

  package {}

  import flash.display.MovieClip;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  import flash.events.MouseEvent;

  Duck/public class extends MovieClip {}

  var moveDuck:Timer = new Timer (10);

  var speedX:Number;

  public void Duck() {}

  this.addEventListener (MouseEvent.CLICK, KillDuck);

  moveDuck.addEventListener (TimerEvent.TIMER, ducksmove);

  moveDuck.start ();

  speedX = 10;

  }

  function ducksmove(evt:TimerEvent):void

  {

  This.x = speedX;

  If (this.x < = 0)

  {

  moveDuck.stop ();

  moveDuck.removeEventListener (TimerEvent.TIMER, ducksmove);

  this.parent.removeChild (this);

  }

  }

  function KillDuck(evt:MouseEvent):void

  {

  var p:MovieClip = this.parent as MovieClip;

  p.setScore ();

  p.UpdateCount ();

  this.removeEventListener (MouseEvent.CLICK, KillDuck);

  this.parent.removeChild (this);

  moveDuck.addEventListener (TimerEvent.TIMER, ducksmove);

  }

  }

  }

  You seem to be trying to delete the same object twice, in the KillDuck function, then in the ducksmove function.  If it is removed already you can not try to remove it again because it is no longer in the display list.

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?