application checker work does not correctly

Similar Questions

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The mouse scroll wheel doesn't work does not correctly?

  Win 7, Microsoft Wireless Mouse 5000
  Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

  Thanks in advance... Bob

  Hello

  1. have you checked if the problem occurs with a different mouse?
  2. don't you make changes on the computer before the show?

  
  You can try the steps provide in the supplied knowledge base articles and check if that helps:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• FF12 and 13 spell check doesn't work does not correctly

  Most of the time, the spell check does not work as it should. I get homesick menu when I right click on a word bad spelled for suggestions. This is the menu I receive.

  http://i273.Photobucket.com/albums/jj216/Moonbarker/DSCN2437.jpg

  Sometimes, I get the list of suggestions, but most of the time, this is the menu I receive. This happens on all websites where there is an area where the spell checker can detect misspelled words. This happened since I updated to Firefox 12. I hope that the update to FF13 would fix it, but it didn't

  Normally, you get this menu if you do right click on the word, but on the text field that surrounds the word.

  You can try to reset Firefox and see if that helps in this regard. Refresh Firefox – reset the parameters and modules

• Applications of 3D games work does not correctly. Specifically, DOOM 3, half-life, half-life 2, left 4 dead, etc.___My is for games. Please advise if I should downgrade to Vista.___Thank you.

  I am running Windows 7 upgraded from Vista home premium 64-bit on a quad-core processors, to 2.66 Ghz, Nvidia GTX 260 GPUs (x 2 SLI), 12 GB of DDR3 RAM.  I can't get the 3D application to work with my games.  I tried the upgrade/downgrade of the GPU drivers; for example DOOM 3 will not work unless the GPU is fully upgraded and then not 3D

  Also, try to update your motherboard chipset drivers as well. Simply because only the video drivers support Sli, it must be supported with the chipset drivers too. If you look at the site of Nvidia and the forums, you will see that Nvidia has not yet perfected SLi games on windows7. I had the same problem as you, I have Nvidia 9800GT SC in SLI, and I work installed Doom3. Fortunately, a fix came a set BIOS to update my motherboard (750 a SLi XFX) manufacturer. See if there is an update to the BIOS of your motherboard. Focus on the Nvidia forums as well.

• Yahoo Mail doesn't work does not correctly

  I have the latest version of Firefox, which is OK and an older version that has problems with Yahoo Mail as well.

  Firefox 3.6.12 used to work with Yahoo Mail, but no more so there must be Yahoo which is something wrong and I do NOT put to level anything on this old laptop!

  Yahoo Mail simply does not work right. I try a NEW mail and there is no message body. Look at a mail only shows the header. IE 6 still works, but ILS (Yahoo) says that I need to improve - NOT!

  I have a newer netbook with VISTA (ARGHHHH!) and Firefox 7.0.1 and everything works except for a few glitches in the Add-ons.

  I'm seriously sick of UPDATES that don't work right! My netbook has had three versions of Firefox and other improvements for VISTA and things just work. And my laptop... too old for the new; Windows XP and VISTA or Win7 worked are the SHIT! And now that Apple ripped the heart of Motorola and Intel and Windows compatibility-highlight... ARGHHHH!

  Hi, Caltrop, based on what I read, I have a similar problem. Can you elaborate on what you have done to remedy this? I consider myself a technophile junior but was not able to decipher what you were saying. Perhaps to explain as I am a child could help make it easier for me to see your step by step resolution. THX!

  After checking my addons & plugins I noticed that I don't have this AdBlocker Plus, you speak of. Does make a difference in correcting mistakes?

• Why is to speak the text doesn't work does not correctly?

  I get a circle turning for a while and no results. He used to work. I have the latest OS 9.2.1. I can see the memory. I have hard reset (home + power on button). I have reset the settings. Nothing helps.

  Hi, PBoesmans.

  Please visit Apple support communities.

  I understand that the option to dictate does not work with Messages on your iPhone 5.  Because force applications to close no has not solved the problem, please go through the troubleshooting steps below.

  Help with Siri

  • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
  • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
  • If Siri is not available or responding to questions, see the next section.

  If Siri is not available, or do not understand or answer questions

  After each step, see if you still need help:

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled in settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
  6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
  7. Contact Apple support.

  Use Siri on your iPhone, iPad or iPod touch

  See you soon

• PrintScreen of Windows 7 doesn't work does not correctly

  Not sure if it is in the correct category but... I downloaded Windows 7 Pro 64 - bit from my school DreamSpark account and installed on my computer, which is pretty old about 5-6 years.  There should not be anything wrong with the copy of Windows, it is not a debug or whatever it is, it's just the regular retail copy.  Almost everything works fine except for a few small quirks/bugs.  First of all, I can't preview images using the Windows Viewer, it displays simply all the rectangles fully black images.  However, if I open an image to preview in Image Viewer, and then click full screen/slide show then it displays the images as should be in full screen.  And then exit fullscreen Gimme the picture in black and white.  Not a particularly serious issue just annoying really.  In addition, perhaps in relationship I guess, I recently discovered that my Windows PrintScreen does not work.  When I hit PrintScreen, or any variation of the PrintScreen key combination, it captures just a large black rectangle, as if my entire screen showed only in black.  I tried to paste my Clipboard into Paint and Photoshop and both give me a black monitor rectangle size, it's really weird.  I even tried a third-party screen capture software and it's the same thing and I can't find anything even close to relevant on the internet.  Anyone have any ideas, anything is appreciated.

  Another separate problem: when I turn on my computer, it will sometimes, not often but enough times to be meaningful, decide to not turn it on and recognize my keyboard and I have to restart and I hope that he do it again.

  Last thing, I swear (I should probably do different missions).  My computer, as in my windows, does not sleep properly.  Sometimes, he won't in the mode 'sleep' and every time I try and wake him up it gives me a white, white I think, screen instead of the login screen.  If I press space to unlock my computer, because there is no password, it will take me on my desk but he will not recognize my internet connection ethernet or my desktop speakers and I have to restart my computer to get these features.  Once again a lot of what I think are really weird problems.  Any ideas on any of my problems is greatly appreciated.

  HI -.

  Run the Windows 7 Upgrade Advisor to see if any conflicts are listed:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check the support site of your system manufacturer for a BIOS update and other updates to the device driver for Windows 7.

  Kind regards...

  jcgriff2

• AMD graphics card is either not installed or does work does not correctly

  Start my windows 7 Home Edition laptop I get a popup telling me that... AMD graphic driver is either not installed or * 2 * does not properly... Can you help me please?

  What your graphics card and the model? What is your computer brand and model? Type system information in the search box above the Start button for gethe details of your graphics card.

  Send a copy of the relevant error report. Here are some notes on the event viewer reports that can help you. When you have a lot of mistakes, you need to focus on system errors and warnings, even if it's the applications that are giving you grief. Problems with the first sorting system can do the easier application problems. Note the time that the computer is started last and deal first with those at the beginning of the boot. Correct previous errors can be solved later.

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the button copy on the general tab allows you to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Caps lock key doesn't work does not correctly. New computer.

  My shift key does not work correctly. Sometimes it works, sometimes it doesn't. I push on it is difficult to ensure that it works. But used in a standard keyboard, it is a problem because I don't bang the keys. I have to keep retype phrases due to errors that it creates.

  Its a shame because my computer is new. In fact, within a month, it is the second time I have to look at the service center. First time because the memory of my computer showed I consumed 40 GB without even having saved/downloaded a single file/document. The repair center did not have an answer and reformat the computer. This problem has been resolved.

  Was so much happier with my Dell computer. Nothing fancy, but no problem.

  I have the same problem. the button is enabled as soon as the second or even third. you don't want to, but you have to take it back in service. Maybe it's a factory default.

• Add-ons - works does not correctly

  Recently (last 4-5 days my modules stopped working properly. Example: Tab Mix Plus shows as installed, but when I select all the options do not affect the behavior of tab; Not appearing LastPass icon is not in the bar of the add-on as it did before; NewsFox icon does not appear in the toolbar as it did. Using Firefox 26.0 on Windows 8 on Dell laptop.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.sqlite, extensions.ini) extensions.* and compatibibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions or is not compatible in ' Firefox/tools > Modules > Extensions ' and then click the Tools button at the left end of the search bar to check if there is a compatibibility update available.

  If this did not help, then also delete the addons.sqlite file.

  You can also check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes