Application crashes show "Loading" message... »

Similar Questions

• CC configuration application crashing and loading [10 64-bit Windows]

  Just joined the plan of the photo, but cannot get the implementation of the program.

  Win 10 64-bit OS

  [Title edited for clarity... MOD]

  Hello

  This link might help: 10 Windows and Adobe Creative Cloud

  Kind regards

  Sheena

• Call any thread DLLs the application crashes

  I have a built in 2015-labview application that acquires spectra of 6 spectrometers via an external dll. The dll triggers an event in labview when data is ready to be pulled from the spectrometers. Since this event, I am running a reentry no void / vi which contains a node function to retrieve the data, that are configured to run in any thread, as it gives a drastic improvement of performance as apposed to run in the UI thread.

  However this can slow down the application crash with a message from windows like the following journal:

  Name of the failing application: axiom 2.0.exe, version: 1.0.0.82, time stamp: 0x5581a6b7
  The failed module name: lvrt.dll, version: 15.0.0.4024, time stamp: 0x5581ac03
  Exception code: 0xc0000005
  Offset: 0x0000000000bec7c0
  ID of the process failed: 0x15c0
  Start time of application vulnerabilities: 0x01d11e6face9febd
  The failing application path: C:\Axiom 2.0\builds\Axiom 2.0\Axiom 2.0.exe
  Path of the failing module: C:\Program NIUninstaller Instruments\Shared\LabVIEW Run-Time\2015\lvrt.dll
  Report ID: 7d4ef3a8-8a91-11e5-94e9-90b11c894ef8

  I don't know if the dll is said to be thread safe or not. Also I do not understand how this causes a problem anyway since it is the only node that accesses the dll at the time, and each of the 6 spectrometers are interviewed in order?

  Is there anyway that I can still enjoy the benefits that the call of any thread dll provides without causing my application crash.

  An example of the increase in performance, it's that I can query the spectrometer from 6 to 70-80 Hz when configured to run in any thread, as opposed to a simple 10 Hz when the Run value in the UI thread.

  Thank you

  Jimmy01 wrote:

  I don't know if the dll is said to be thread safe or not. Also I do not understand how this causes a problem anyway since it is the only node that accesses the dll at the time, and each of the 6 spectrometers are interviewed in order?

  Is there anyway that I can still enjoy the benefits that the call of any thread dll provides without causing my application crash.

  Looks like that the DLL is not thread-safe. If you do not run in the UI thread, there is no guarantee that the DLL will be always called from the same thread, even if you only call it in one no reentrante Subvi. By default, LabVIEW allocates multiple threads by the enforcement system, with the exception of the user interface. If the DLL stores certain information of one call to the other, this context can be lost when run in a different thread.

  Here's a thread that provides two possible solutions; a wrapper DLL is required, use the other the utility 'threadconfig' (or the corresponding INI file settings) to force a subsystem of a thread executing unique http://forums.ni.com/t5/LabVIEW/Force-DLLs-to-tun-in-the-same-thread-expect-the-UI-Thread/td-p/11438...

  Another option would be to put the call to the DLL in a timed loop that runs constantly, and you can use a queue or the notifier to pass data to. A timed loop runs in a single dedicated thread, so I think it will work.

• Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file.  He always loaded the image at the point Windows 8.1.

  Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file.  He always loaded the image at the point Windows 8.1.

  Any ideas?

  davids62398138 wrote:

  Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file.  He always loaded the image at the point Windows 8.1.

  Any ideas?

  It was reported many problems with older versions of PSE and WIN10.

  Can you open PSE from office or from the list of programs on the start menu?

• Flash Slide Show - how the 'image loading' message to delete

  Thanks for looking-

  I created a simple slide show 2-image created in MX2004.

  I would prefer a white rather than this brief loading message.

  Is there a setting in the code to achieve this?

  Page is here: http://www.workandpartners.com/WAP/indexnewnav3.html

  TIA

  It is not any parameter in the code that appears to control the activity of preloader, so if this could be added, it would probably be a selection of whatever DW interface as for the creation of the show.

  It is of no use to you, I took a few minutes and created a simplified swf file by using the two images.  It is a static piece, which means that you cannot add/edit images for her as the slide show is displayed in support and it does not preload, but it has to go for now... If the quick effort does not kill, my weekend plans.

  The zip linked here contains a html page that you can use to copy/paste the embed code in your file, the swf file and a javascript file that must also be in the folder.  In the head section of html, there are two script tags that must also be added to the head section of html to your file.

  http://www.nedwebs.com/Flash/indexFlash.zip

• I get an error message "an internal error occurred in the initialization stage. The application cannot be loaded, please contact application, Error 502 "seller

  Original title: Error 502

  How to fix "an internal error occurred in the initialization stage. The application cannot be loaded, please, seller contact application, Error 502 "after installing Yahoo Messenger

  Hello

  1. Once you get this error?

  2 are connected to any computer in the domain?

  3. have you made changes on the computer before this problem?

  I suggest you try to uninstall and reinstall Yahoo Messenger and check if it helps.

  Uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Install a program: http://windows.microsoft.com/en-US/windows-vista/Install-a-program

  If uninstalling and reinstalling Yahoo Messenger did not help, then it would be better to post the same question in community Yahoo for assistance.

  Community of Yahoo: http://help.yahoo.com/l/us/yahoo/helpcentral/community_index.html

  Hope the information is useful.

• How to show the message from the application in the notification bar to the home screen with the compilation of the OS 5.0 on OS 6.0

  Hi, expert,

  I've implemented the ApplicationMessageFolder to add the message to the application in the device message box. We also set the indicator on the notification bar. To OS 5.0, we could not click the notification bar to see a summary of the message. 6.0, we could do it, but although our application put new notification on the notification bar, it will not be shown on the summary message by clicking on the notification bar.

  From this link: http://supportforums.blackberry.com/t5/Java-Development/Application-Indicators-and-Home-Screen-Integ..., it says:

  ========================

  Applications that add custom messages can specify if they are displayed in the summary of the notification.  This is done using the ApplicationFolderIntegrationConfig, which was added in BlackBerry Device Software version 6.0, as shown in the code example below, which is an extension of the previous example.

  ===========================

  However, our application is built with Java SDK 5.0 as our minimal operating system is 5.0. That does not mean that there is no way that we could do? Thank you very much in advance for any idea about it.

  You can use preprocessing, but it should be a separate os 6 version, then.

• Dynamic load Message selection (Clause Where) in the application process!

  Problem with a choice of loading Message.
  
  I kept VO where the condition but I add WhereClause when loading the page. !!
  
  I guess this isn't my WhereClause given as it is not called when it has been initialized.
  
  Is that there is no way out?
  
  Published by: 942767 on 10 July 2012 23:25

  Hello

  Instead of putting the definition of VO, VO instance use and define the place where the duration clause.

  Kind regards
  GYAN

• CanvasClear causes the application crash

  I use a simple rectangular control canvas with movement indicator (Vshape) that displays the currently measured value.

  The value is updated 10 to 14 times per second, and deliberately, I made these values fluctuate.

  The canvas is filled with gradient colors (5 ranges) and the indicator moves upwards or downwards. In order to redraw the indicator,

  I use CanvasClear with the VAL_ENTIRE_OBJECT attribute and then redraws its content.  A few days ago, I noticed,

  that the software crashed, when the Panel containing the canvas control, was behind another window (belonging to an another SW

  tell the programmers Notepad or msword). I was able to reproduce the crash, which occurred immediately, but

  After that the software worked anywhere from 0.5 to 5 hours and the questionable control was behind another window.

  I also have seen, before the accident, if I move the window covering away from the canvas control, rectangle covered

  becomes black (break in non-se mode, it remains white) and it takes several seconds to redraw the partial region.

  Sometimes I noticed irregular elements (a diagonal line, not planned, from the left corner down to the right).

  Labwindows2010 IDE always shows crash-point as a call to CanvasClear().

  None of the functions, manipulating the canvas control, the return of negative values, because the software checks to see if it and if found newspapers a

  appropriate message. The canvas control has to draw political as mark for update.

  Does anyone has an idea how to everyone such instability or how to solve this problem?

  I was also able to capture the call stack and dismantling:

  Unhandled exception at 0x6850226E (cvirte.dll) in sw_dbg.exe: 0xC0000005: breach of access writing location 0 x 00000000.
  6850226E

  68502258 or eax, 0C00h
  6850225D mov dword ptr [esp + 50 h], eax
  fldcw 68502261 word ptr [esp + h 50]
  fistp 68502265 dword ptr [esp + h 50]
  movzx 68502269 eax, byte ptr [esp + h 50]
  6850226E mov byte ptr [esi], al / / the esi content is 0
  movzx ecx 68502270, byte ptr [edi]
  fldcw 68502273 word ptr [esp + h 54]
  68502277 imul ecx, ebx
  6850227A mov dword ptr [esp + 50 h], ecx
  6850227E fild dword ptr [esp + h 50]
  68502282 fdiv qword ptr ds: [68802D40h]
  68502288 fadd qword ptr ds: [68802D38h]
  6850228E ptsps qword ptr [esp]
  68502291 call 687D 5950

  Call stack:

  cvirte.dll! (6850226e)
  [Frames below are may be incorrect and/or missing, no symbols loaded for cvirte.dll]
  cvirte.dll! 684d149c)
  cvirte.dll! 687b036c)
  cvirte.dll! 687b09c2)
  cvirte.dll! 684d9759)
  cvirte.dll! 684d9981)
  cvirte.dll! 687b 5850)
  cvirte.dll! 687bc167)
  cvirte.dll! 687bd40f)
  User32.dll! 7674c4e7)
  User32.dll! 7674c5e7)
  User32.dll! 7674c590)
  User32.dll! 76744f0e)
  User32.dll! 76744f7d)
  ntdll.dll! 779c6fce)
  User32.dll! 76744ec3)
  User32.dll! 76741be4)
  User32.dll! 7673ffcd)
  cvirte.dll! 687c13c1)
  cvirte.dll! (68483419)
  cvirte.dll! (68722687)
  cvirte.dll! (68729882)
  cvirte.dll! 68525b8b)
  cvirte.dll! 686042a 6)
  cvirte.dll! 6846d7dd)
  cvirte.dll! 68557bcc)
  sw_dbg.exe! (00402470)

  Sorry for the delay in response. I followed a red herring for a few hours when troubleshooting this. It turns out that this could have been resolved much more quickly using the resource followed in CVI. If you have the full development system, you can change the compiler Options > debug to cabins lying level and then open the window > Resource Tracking. This will show you all the memory and handles your code currently open. It will appear when the elements are created, changed, or destroyed. Looking at it when your application is running (you need to suspend execution at a breakpoint to see the tracking of resources), you will see that the program continues to create plots that belong to the curve of the COLORSCALE. It is your intensity graph. If you look at using the function for PlotIntensity, he recalled in a note that a new trace is created every time that you call this function, and you want to get rid of these plots with DeleteGraphPlot.

  You can add something like this in InitScaleData.

  if(plotHandle != 0)
  {
          DeleteGraphPlot (IndicatorPanel(0), IND_COMP_COLORSCALE, plotHandle, VAL_DELAYED_DRAW);
  }
  plotHandle = PlotIntensity (IndicatorPanel(0), IND_COMP_COLORSCALE, scaleArray, 2, OGL_SCHEME, VAL_DOUBLE, gColorMap,gColorMap[OGL_SCHEME-1].color, OGL_SCHEME, 1, 1);
  

  I don't think you run necessarily in a memory problem here throwing the parcels. Intensity plots use rather a small number of GDI handles. In Windows Vista and 7, the number of GDI handles is limited to 10,000 by a Windows registry key. I look at the number of open GDI handles in the process Explorer reveals that 10000 handles were open when the application crashed on my system after about 45 minutes of execution.

  Let me know if it works if you have a chance to try this solution.

• Adobe Bridge CS3 crashes when loading in my Windows 7 workstation.

  Adobe Bridge CS3 crashes when loading in my Windows 7 workstation.
  I've recently completely removed, disabled and reinstalled all my Master Collection Adobe Creative Suite CS3 to fix some problems with another application in the suite, and now I'm surprised bridge continues to fail. In my mobile workstation, the same software (bridge) uses to run.

  I tried to run Bridge under several compatibility modes. All have failed.

  Is there any bug to know, that I should be aware of? Any difficulty?

  Is this a common problem?

  Have you tried to reset the preferences?  Hold down the CTRL key and launch Bridge.  You will get a window to reset.

  By accident, it means that the computer has to be reset?  It freezes?  Error messages?

  Not enough information in other words.

• Firefox 4 shows several message boxes with "uninstall all '. '. How can I stop this?

  Firefox 4 shows several message boxes with "uninstall all '. '. They may not be closed and they freeze Firefox. The only way to stop is to END of TASK through the Task Manager.
  OS: Vista) with all the service packs and updates as of April 21, 2011. All other browsers and applications are closed.

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• LabVIEW application crashes when you exit a VI with one or several clients on remote control

  Hi all

  This is the question that I met with LabVIEW 8.2 and LabVIEW 8.6. I publish one of the screws dynamically launch my application as a Web page. Then I load the application and launch this dynamic VI and connect to this VI by using a web browser from a PC intranet. Then if I try to exit from VI when the client is still connected to it, the application crashes. Please see the attached picture.
  This behavior occurs randomly. Sometimes, everything works as expected when you exit the VI - the main screen of the application appears and in the client side, there is a "remote connection Panel is closed.
  What could be the reason for this?

  Thank you
  Luxama

  Oops... The method of 'Close links' to work correctly. I apologize for the error.

  Regarding the issue of application crash, I did this close relationship, then wait a few milliseconds and then quit the VI. Today, the application seems to work very well.

  In the meantime, I had another doubt. Is there a way to link to the application instead of a VI?

  Thank you
  Luxama

• VB6 application crashes while trying to print the microsoft word document using specific printers

  I use VB6 application to print MS word by loading all windows printers in my application. Regardless, I print a document or not when I load these printers in a screen and to cancel the screen, I get below RTE:

  Run-time error '-2147417848 (80010108) ';

  Automation error

  The object invoked has disconnected from its clients.

  Check the application event log and found the details below:

  The failing application name: PiMS.exe, version: 8.1.0.0, time stamp: 0x546042e2

  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521ea8e7

  Exception code: 0xc0000005

  Offset: 0x000330bd

  ID of the process failed: 0xa4c

  Start time of application vulnerabilities: 0x01d03a7c78674f73

  The failing application path: C:\Program Files (x86)\CSC\i.PM\PiMS.exe

  The failed module path: C:\Windows\SysWOW64\ntdll.dll

  Report ID: 61d95797-a670-11e4-9bf2-005056ab746a

  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: PiMS.exe

  P2: 8.1.0.0

  P3: 546042e2

  P4: ntdll.dll

  P5: 6.1.7601.18247

  P6: 521ea8e7

  P7: c0000005

  P8: 000330bd

  P9:

  P10:

  We believe that the run-time error can occur at different times as the corrupted print queue is default and its position in the list of printers. The error is caused by the HP Color LaserJet CM6040 MFP PCL6 print queue, because once we stopped to this printer via the mapping RDP session, the application crashed.

  How to solve this error.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• User profile is not loaded message when signing

  When I log in, my pc now shows a message saying "preparing your desktop" followed of "user profile is not loaded correctly, see log events or administrator."  These messages appear every time I log in. Plus all my settings are deleted when I sign and I have to start whenever I log on

  When I log in, my pc now shows a message saying "preparing your desktop" followed of "user profile is not loaded correctly, see log events or administrator."  These messages appear every time I log in. Plus all my settings are deleted when I sign and I have to start whenever I log on

  Have a look at this tutorial. Please read the instructions carefully.

  http://www.AnswersThatWork.com/Download_Area/ATW_Library/windows_vista/Vista__3-Vista_Problem_Error_Your_user_profile_was_not_loaded_correctly.PDF

  Note: the tutorial is in pdf format.

• Whenever the browser opens, I get an error saying: "Explorer.exe" application crash

  Original title: I get an error saying: "Explorer.exe" application crash

  Whenever it opens explorer, I get the error below and it remains my explore

  I get the error message is the following:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: StackHash_b61d
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb73436
  Exception code: c0000374
  Exception offset: 000b06fc
  OS version: 6.0.6002.2.2.0.256.1
  Locale ID: 2057
  Additional information 1: b61d
  More information 2: 167a8c47623c2496d77676b17616bd5b
  3 more information: ae0a
  Additional information 4: 8785af56cd014fa3319b3e04d072db96

  Please let me know how I can solve this problem.

  Thank you

  Sam

  Hi Sam,

  Do you remember what makes any agreement, changes this question?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.