Application (exe) works not properly on XP

Similar Questions

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• HP envy 15-j104sl: display not working not properly

  Hello

  I have a Hp Envy 15-j104sl, unfortunately after a fall, the screen does not work properly: sometimes, the left part or the entire display turns white and it is impossible to use it unless I move the screen / hinges in another post.
  The glass is not broken, I think the problem may be in the base/hinges lower/some other type of contact works not very well.

  I am really disappointed with the online Hp support: I can't find location to send my laptop for repair, and I can't even call help if I have my warranty has expired.

  It's a bad display cable or possibly the display panel. It's going to not need a repair by a technician. Where do you live (country)? I'm not clear if you say your warranty is or has not expired?

• error message: "ALCXMNTR. EXE could not properly initialize to start my computer

  I get an error message when my computer starts and if he says 'ALCXMNTR. EXE could not initialize properly"and now I have connection problems

  ALCXMNTR. EXE seems to be associated with sound card drivers. I would reinstall your sound driver to the latest version.

• Application role does not properly

  Hello

  I have an authorizattion init block which assigns the following values when a user "pconde"

  USER: pconde

  GROUP: ManagerGroup

  I have the catalogue of group "ManagerGroup" created through the option manage catalog groups. Now, I created a new role of application with the following details:

  Name - Manager

  Display name - sales managers

  I also added the "ManagerGroup" group to this application role.

  I assigned filters to the data level the 'Manager' via Manage application role-> identity

  When I connect through my pconde of the user, level data filters are not get picked up. The application role Manager sees all the data yet that the weblogic user see. It seems that the application role may not correctly setup.

  What I am doing wrong?

  Yes I did. In fact, my problem is different. The session of ROLES was not get properly completed. I rectified this and my problem was solved.

• Since the update with OS 10.11.6, flash not working not properly

  Just got a new Mac Book Pro, new on mac in general. Had a video to play on a Web site but didn't work not, downloaded Chrome, worked well. Then made the update to OS 10.11.6 (not), and the video does not work (it says: cannot load the Flash plug-in). Made sure plugin has been enabled in my Chrome. Tried to download Flash himself, tried to remove Chrome and Flash and download Chrome still once, nothing works. Now for some reason, it works... What is (and was) happening... Someone has an idea? THX!

  -Chrome has built in Flash.

  -Safari does not come with Flash and use Flash with Safari, you need to download and install Flash

  So this is why worked chrome and Safari worked after downloading and installing Flash. Make sure you just threw always get Flash from the Adobe website.  Once you install Flash from Adobe it has also installed a Flash preferences panel in system preferences and yo can update Flash from here

• Want to 750-114: 10 Start button not working not properly

  When I left click on the windows icon to set up the list of programs and 10 button to bring up the apps page to start nothing happens. It started last week.

  Don2498

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on the button start Win10 is no longer working and I wanted to help.

  People with MS by pushing the Win10 updated weekly, it is not uncommon for a working PC suddenly that things stop working.

  Here, it's a simple solution, but as shown in this thread related, is not: bar of tasks/Start button not working not!-Windows 10 Forums

  All what I can say is that you work through this thread and hopefully, any of the fixes will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Lenovo x120e keyboard works not properly

  I have a Lenovo x120e, I bought a couple of years. Last Friday, I started to have problems with the keyboard. The first question was that the computer was save my CTRL key was pressed continuously. A single reboot did not fix this. However, by using the onscreen keyboard, I could get the computer to recognize possibly CTRL key was indeed not and my keyboard seems to work correctly again.

  However, from Sunday, I started having new problems and have not been able to solve. Specifically, the keys g and h do not work (although sometimes, if the onscreen keyboard is up as well, they will register as 5 and 6, respectively). Other keys around the Board work not (apostrophe, 5 and 6, some function keys). The on-screen keyboard works perfectly fine, as does a USB keyboard (I currently use).
  I tried the following, and none of them have helped:
  (1) virus and malware scan - nothing came (analysis complete, not just "fast")
  (2) check the performance of the equipment (an OEM utility) - no problem
  3) updated keyboard driver
  (4) uninstalled and reinstalled the keyboard driver
  5) restore to a restore point Windows before initial issue last Friday
  (6) restart in Mode safe without the attached external keyboard - same keys always had the same problems.
  So now I wonder if it's a hardware problem or a software (driver or OS) one. As I see it, my two possible options are:
  (1) If a problem with the hardware, at least try to clean and if necessary replace the keyboard
  (2) the software, wipe the computer and reinstall Windows. All my data is stored externally, while it would be annoying, is not a major issue to do this.
  I want to just make sure you choose the right course. Someone saw in which of them is most likely necessary remedy. Or if I missed a possible way to fix this without one of these last ditch effort, I would be grateful for more information.
  Thanks to you all.

  Hello Andrew,.

  I would agree that it's a hardware problem. At the same time, if you want "good" do an OS reinstall, you have nothing to lose but some time and effort.

  Kind regards

  BearPup

• device control panel works not properly. Cannot read messages about it. How can I fix this?

  Have a HP Officejet 6500 E709n, OS is Windows 7-64 bit. Control Panel on the front of the printer device does not properly. Cannot read messages of information/on it.  What is the problem?

  Certainly looks like a hardware problem (LCD going / has went wrong). At this point, I recommend you contact the support for repair or replacement.

• SIRIUS Internet Radio Media Player not working not properly because Windows update installed on my PC

  My Sirius internet Player multimedia radio is not working properly because Windows updates are installed on my pc. updates KB971486 KB974455 KB974571 KB975467 KB975517 KB974155 KB976525 KB974470.  Tested internet radio/media player for sirius on another computer and there is no problem.  Have tried all of the fixes recommended by sirius... This update of windows seems to the source of the problem.

  Does anyone have an idea with security update could be the cause of the problem?  Should I uninstall this?  If I find one that is causing the problem, how can I block it to move again?

  Thank you

  Hi Smwall,

  Welcome to the Microsoft Answers site!

  Do you have a particular error when you try to play?

  Method 1:

  You can try to start check and clean boot if the problem persists. Clean boot boot will help you know if all the background programs conflicted with the player. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Method 2:

  You can try to uninstall the updates one by one in the windows update window and check if the problem persists.

  To uninstall the updates from windows update:

  1. open installed updates by clicking the Start button.

  2. click on Control Panel.

  3. click on programs

  4. under programs and features, click view installed updates.

  5. click on the update that you want to remove, and then click Uninstall.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more details, visit the below given link:

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Method 3:

  Alternatively, you can hide the update, which does not allow the player to play.

  Follow the below given steps:

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. do one of the following:

  ·         Click the link that tells you important updates are available if you have some updates to hide.

  ·         Click the link that tells you optional updates are available if you have optional updates to hide.

  3. Select an update that you want to hide, right-click, and then click hide update. Do this for each update you want to hide.

  4. click on OK.

  For more information about Windows Update troubleshooting visit the below given link:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.