Top Gun Afterburner Force feedback blue screen of Windows 7

Hello

I have the gamepad of 'Top Gun Afterburner Force feedback' Thrustmaster that worked fine, until I installed the service pack 1 of windows 7.

Now, once plugged into the usb port, windows crashes the BSOD

What can I do?

Hi Choum28

I tried your solution and it works very well!

In Control Panel, I see 12 buttons (instead, I 8) but the rest is great!

Thank you very much

Kind regards

Massimiliano

Tags: Windows

Similar Questions

Equium A110-276: blue screen of Windows Vista error

OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

Anyone know the problem?

I use Equium A110-276
1024 MB OF RAM
Core Duo 1.67 GHz
Windows Vista Edition Home Premium

Help please! THX

Blue screen and Windows nothing unusual. Am I wrong? ;)

Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems

I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

Hello
I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

Any guidance will be appreciated. Thnx Nick

Hello

If you meet this new,
http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

Unable to start - blue screen after Windows update

original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

Can not even go in safe mode

Hello

try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

the link below is how to download and get a vista disk startup repair, which you can start from the

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

http://www.bleepingcomputer.com/tutorials/tutorial148.html

to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

Change boot order it do dvd drive 1st in the boot order

If you can make the above change how you receive updates to find the update problem

When right-clicking on it UAC prompt you hide it

http://www.bleepingcomputer.com/tutorials/tutorial140.html

Choose one of these settings:

Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and then restart windows.

whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and windows restart.can any1 help me with this problem. my wireless card is qualcomm atheros AR5007 802.11b/g.my windows is windows 7 ultimate.please help with this issue.i m attaching files and dump the error image

screenshot of error:

http://sdrv.Ms/Nn8gDA

memory dump file:

http://sdrv.Ms/NiXJdJ

Also, can you provide the latest files minidump since reinstalling the NIC driver.

crash blue screen of Windows 8

I've updated to windows 8.1 and realized that the games run slowly on it. Then I updated my software drivers so I spent again to windows 8. But when I did that my laptop started to crash at a random moment when I was playing a full screengame or watch a vid on youtube full screen it hangs and said if you want more search information for driver iqrl not less or equal.

I would apreiciate if someone wants to help me.

-Devil

Hello

Thanks for posting your question in the Microsoft Community.

The DRIVER_IRQL_NOT_LESS_OR_EQUAL error usually occurs after the installation of the faulty device driver or service system, BIOS.

If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
- Did you just install a new program or a piece of hardware, update a driver, install an update, etc. ?
- You get the error message? Please provide the exact error message / error code.
I suggest you try using the methods below and check if it can help solve the problem.

Method 1: Run the Safe Mode and perform a clean boot

Step 1: Safe Mode. Safe mode is a troubleshooting mode that starts Windows with a minimal set of drivers and services. Start your operating system in this way and see if the problem appears.

Start the computer in safe mode with network and check if the problem persists. Follow these steps to start the computer in safe mode.

Click on the link and follow the steps in Start parameters of Windows (including safe mode)

http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

If the problem does not exist in safe mode, try to perform a clean boot and check.

Step 2: Perform the clean boot.

Reference: How to perform a clean boot in Windows

http://support.Microsoft.com/kb/929135

Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

If the problem persists I suggest you follow method 2

Method 2:

Resolution of errors blue screen in Windows

Reference: http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

IMPORTANT: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

Also check your installed programs. If you see something that you have not installed and is not part of Windows, use the Remove Programs option.

Hope this information is useful. Please let us know if you need help with Windows.

Thank you

Blue screen of Windows 8 with various errors

I want to HP dv6 provided with Microsoft 8 on it (it's only a year today)

The problems that I encountered:

-L' computer would freeze with a screen colorful weird pixelated

-L' computer freezes while attending a bsod (you could tell because the screen would be the light blue color, but would not have error codes or restart)

-L' computer would go to a bsod with an almost different error code every time (sometimes I couldn't write before it will re-start)

-system_thread_exception_not_handled (dxgmml.sys) or (dxgkrnl.sys)

-"KMODE_EXCEPTION_NOT_HANDLED"

-page_fault_in_nonpaged_area (ntfs.sys) (it's the one I see most often)

-memory_management

-IRQL_not_less_or_equal

-kernel_security_check_failure

-driver_overrun_stack_buffer

All these problems have occurred during various tasks, never the same as the one

- And now I can't even on the computer because as soon as I turn it on it tries to auto repair, but fails. It then takes me to the boot menu where I tried all options, without success.

I don't have any sort of installation dvd or windows dvd backup.

I do not know what I did to make this crazy computer, but please help me to make happy again because I have no money against hepatitis a for professional help not to mention a new computer.

OT: Computer Hp Windows 8 / I don't know what the problem is or how to fix it.

Hello

Blue screen (sometimes referred to as errors or errors of STOP code black screen) errors occur if a serious problem, windows to shut down or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

I suggest you try the steps from the following link:

Resolution of errors blue screen in Windows
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

Also check if there are errors listed in Event Viewer.

Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error.

To open the journals please follow the steps.

Press the Windows key + W
Type 'view event logs"on the splash screen and press enter.

I hope this helps. Let us know if you have other problems with Windows in the future.

Error on blue screen during windows startup - LeAPC_INDEX_MISMATCHErreur

When starting my pc I get a blue error screen saying LeAPC_INDEX_MISMATCHErreur, my pc restarts and I get error when loading of the readers saying: 3rd master ST31000528AS CC38 ultra DMA mode 6 S.M.A.R.T capable but failed the control. 3rd drive hard master S.M.A.R.T command failed, press F1 continue.

I also have this error report for blue screen event.

Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057

More information about the problem:
BCCode: 1
BCP1: 85212696
BCP2: 00000000
BCP3: 0000FFFE
BCP4: 00000000
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files helping to describe the problem:
C:\Windows\Minidump\Mini020712-01.dmp
C:\Users\Kiro\AppData\Local\Temp\WER-278446-0.SysData.XML
C:\Users\Kiro\AppData\Local\Temp\WER254B.tmp.version.txt

Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

Is someone can you please tell me what has gone wrong, this has happened more than 3 times now.

Hello

What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
If this thread - top 3 RESPONSES (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

=============================================================

BCCode: 01 0x00000001

The most common cause of this Bug_Check is drivers then use the methods in the next message
updated the BIOS and drivers major. If necessary we can tell you how to run the Verifier however
with Windows Vista, it's a good idea to update all the main drivers as the maturation process is
still in force. (See how to update the drivers and run driver verifier in the next message).

--------------------------------------------------------------------------------------------------------------

Bug Check 0x1: LeAPC_INDEX_MISMATCHErreur

LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.

Important information if you have received a STOP Code

If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

The following actions could prevent a mistake like this does not happen:

Download and install updates for your computer from Windows Update device drivers.
Scan your computer for computer viruses.
Check your hard drive for errors.

LeAPC_INDEX_MISMATCHErreur settings

The following settings are displayed on the blue screen.

Parameter	Description
1	The address of the system (system call) function or a worker routine.
2	The value of the field ApcStateIndex of the current thread.
3	The value of the field CombinedApcDisable of the current thread. This field consists of two separate 16-bit fields: (thread-> SpecialApcDisable < 16)=""> wire-> KernelApcDisable.)
4	Type (system call 0-, 1 - routine worker) of the call.

Cause

The most common cause of this bug check is when a system file or driver has a sequence are mismatched calls to deactivate and reactivate the APCs. The data key item is theThread-> CombinedApcDisable field. The CombinedApcDisable field is composed of two separate 16-bit fields: SpecialApcDisable and KernelApcDisable. A negative value of field indicates that a driver has disabled APC normal or special (respectively) without them the reactivation. A positive value indicates that a pilot has allowed normal TTB or special too many times.

BCCode: 01 0x00000001<-- read="" this="">
http://www.faultwire.com/solutions-fatal_error/APC-index-mismatch-0x00000001-* 1016.html

====================================================================

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

several error on a blue screen in windows 8

Hello

Windows 8 machine get several error on blue screen with different bug control every time. mini dump link http://1drv.ms/YASxed

Can you please give some help to solve this problem?

Thank you.

Hello

MEMORY_MANAGEMENT (1A)

This indicates that an error occurred serious memory management.

Error checking 1 a, {fffff68000012430, aa300001401e0886,411, fffff68000012031}

-1 setting of the bug check is 411 indicating a page table entry (PTE) was damaged.

I suspect a 3rd driver causing corruption.

-----------------------

1. uninstall your Netgear Wireless Solution software, it is unnecessary and dated for almost 8 years ago.

2 Please also also uninstall your software Check Point, of course, a virtual card. Device drivers are 7 years old.

3 if accidents continue after both of foregoing, please activate the driver verifier:

Driver Verifier:

What is the driver verifier?

Driver Verifier monitors Windows kernel-mode drivers, drivers graphics and even 3rd party drivers to detect function calls illegal or actions that could corrupt the system. Driver verifier may submit Windows drivers to a variety of constraints and testing to find the incorrect behavior.

Essentially, if there is a 3rd driver party supposed to be originally the issues at hand, enabling Driver Verifier will help us see which specific driver is causing the problem.

Before you enable Driver Verifier, it is recommended to create a System Restore Point:

Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | Select "create a Restore Point.
Windows 8/8.1 - http://www.eightforums.com/tutorials/4690-restore-point-create-windows-8-a.html

How to enable the driver verifier:

Start > type "auditor" without quotes > select the following options.

1. select - 'create a custom settings (for code developers).
2 select - "choose custom a complete list settings.
3 check the following boxes.
-Special pool
-Pool management
-Force IRQL control
-Detection of blockages
-Security Checks (only on Windows 7 & 8/8.1)
-DDI compliance verification (only on Windows 8/8.1)
-Cheques
4 select - "select the driver names from a list.
5 click the 'supplier '. This will cause the sorting of all drivers by the provider.
6 check EACH box that is NOT provided by Microsoft / Microsoft Corporation.
7 click Finish.
8 restart.

Important information about driver verifier:

-Perhaps the most important which I now make it clear that it was bad often, activation of the Verifier itself is not! a solution, but rather a diagnostic utility. He'll tell us if a driver is causing your problems, but even once it will not solve your problems purely and simply.

-If the Driver Verifier finds a violation, the system will search BSOD. To expand on that a bit more for those interested, more precisely what driver verifier actually does is he's looking for any driver to perform illegal function calls, causing leaks memory, etc.. When and / in this case, the corruption of the system occurs if allowed to continue. When Driver Verifier is enabled by my instructions above, it is followed all pilots 3rd part (as we have defined it this way) and when he catches a pilot tries to do, it will be quickly mark this driver as being a troublemaker and bring down the system safely above all corruption may occur.

-After activation of the Verifier and rebooting the system, according to the culprit, if for example, the driver is started, you may not return to normal Windows because Driver Verifier detects in violation almost right away, and as noted above, which will cause / force a BSOD.

In this case, do not panic, follow these steps:

-Start in Safe Mode by pressing repeatedly F8 key during boot to the top.

-Once in Mode safe - start > Search > type "cmd" without the quotes.

-To disable the Driver Verifier feature, type cmd ' auditor/Reset"without the quotes.

-Reboot and start Windows normally.

If your OS has become corrupt or you cannot start Windows after you disable the auditor through Safe Mode:

-Start in Safe Mode by pressing repeatedly F8 key during boot to the top.

-Once in Mode safe - start > type "System Restore" without the quotes.

-Select the previously created restore point.

-Note that Safe Mode for Windows 8/8.1 is a little different, and you may need to try different methods: 5 ways to boot into Safe Mode on Windows 8 and Windows 8.1

How long can I keep the compatible driver verifier for?

I recommend keeping it activated for at least 24 hours. If you do not BSOD right there, turn off Driver Verifier. Usually, I say if, yes or no, I would like for you to keep active longer.

My system BSODS with enabled, driver verifier where I can find the crash dumps?

-If you have the system planned to generate small images of memory, they are in the %systemroot%\Minidump.

-If you have the system planned to generate images of the kernel memory, it will be located in the % systemroot % Directory and labeled MEMORY. DMP.

For any other question can most likely be answered by this article:

http://support.Microsoft.com/kb/244617

Kind regards

Patrick

Get blue screen after Windows KB968389 updates

I got the blue screen after that almost each update of Windows, but later is the following:

Internet Explorer 8 for Windows Vista for x 64-based systems (25/08/09)
Update for Windows Vista for x 64-based systems (KB968389) (11/08/09)

I have a new Dell laptop Studio 15. Do the system restore still does not work, or do not put the machine in Mode without failure. I'm tired of spending hours trying to get my machine up and running

Hello

Certainly Support Dell help you change things anymore they can claim it was something
you did it.

Dell support
http://support.Dell.com/

Dell forums
http://en.community.Dell.com/forums/

My thoughts are that it is a driver problem. Try to update your drivers, and then stop the updated driver in Windows Updates.

-----------------------------------------

This is my generic how updates of appropriate driver:

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.

Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.

Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

----------------------------------------------------------

My generic blue screen troubleshooting if necessary:

Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-----------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Blue screen of Windows Vista 64

This problem started occurring after the system has been reformatted.
Since the reformatting of drives, the system has been crash a lot, was the last crash.

Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 4105

More information about the problem:
BCCode: 24
BCP1: 00000000001904AA
BCP2: FFFFFA600C81F3E8
BCP3: FFFFFA600C81EDC0
BCP4: FFFFF80001D83369
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Please note; I can't download updates. Doing so blocks a host process, and it is more downloads. I am also unable to Service Pack 2 installed, even with a program of stand-alone installation, when you attempt to install, he said: the system is not ready, or it hangs the computer.

Hoping you can help me.

Here's another error blue screen that has just occurred;
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 4105

More information about the problem:
BCCode: 1a
BCP1: 0000000000041790
BCP2: FFFFFA80033A6BC0
BCP3: 000000000000FFFF
BCP4: 0000000000000000
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1

Hello

There were problems before you re-installed Windows?

Given that you did do a re-installation means that the causes are mainly hardware, BIOS, low-level chipset
drivers or other drivers and programs that load low level.

To see how to use BlueScreenView and MyEventViewer to troubleshoot the Bluescreens see the
Methods indicate in this thread - top 3 responses (+ 1 other).

http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites. This may not help but it's worth a shot. Don't forget to check the wiring and
Rigorously test the hard drive.

ZIP or download the content of the C:\Windows\minidump

Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

-------------------------------------------------------------

The most likely causes are the hard drive problems, wiring or a problem of hard disk (on the motherboard) controller. Some
antivirus/antispyware/security programs could play a role. See message methods to test the
course over ground.

BCCode: 24 stop Code 0 x 00000024

Cause

One possible cause of this bug check is damaged drive. Corruption in the system of NTFS file or defective (sectors) on the hard disk can cause this error. Corrupted drivers SCSI and IDE may also compromise the ability to read and write to the disk system, so causing the error.

Another possible cause is the depletion of memory pool non paged. If the nonpaged memory is exhausted, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, another driver in nonpaged kernel memory in pool mode may also cause this error.

Solve the problem

To solve a problem of hard drive corruption: Check Event Viewer for error of SCSI and FASTFAT (syslog) messages or Autochk (the application log) that might help determine the device or driver that generated the error. Try disabling any antivirus software or Disk Defragmenter tools that continually monitor the system. You must also run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer. RunChkdsk /f /r to detect and resolve any file system structural corruption. You must reboot the system before the start of the analysis of disk on a system partition.

BCCode: 24 stop Code 0 x 00000024<-- read="">
http://www.faultwire.com/solutions-fatal_error/NTFS-file-system-0x00000024-* 1051.html

-----------------------------------

BCCode: 1a 0x0000001a

The main cause of all who's memory probems if there may be other causes.
See the test article in the next message memory.

Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
sound or other system functions that it these get hot. Try adding a small fan blowing in
the vents as a test.

Have you recently added any hardware? Have you updated any drivers just before this started?
(Check control panel - updates of Windows to see if all drivers have been updated it on the)
This started the time) likely guilty hand are video driver, other great drivers, memory, and
antivirus/antispyware/security products could be at fault as well as reader questions.

Use the troubleshooter below and refer to the following message to drivers and memory when
you get these sections and then back to the resolution of the problems according to the needs.

BCCode: 1a 0x0000001a<-- read="" this="">
http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

-------------------------------------------------------------------------

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during ' blue screen of the.
death ' crashes and displays information about all accidents of a table.
Free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.

You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Blue screen on Windows Vista - Stop 0x7B

My laptop won't come all the way that it goes to screen and then this blue screen comes to talk about something with the hard drive. And I can't go down. I turned on and outside, like 10 times! Someone help me please this down so I can use my laptop.
And it won't let me not long away at all...
It shows the dell screen like its coming and then I have two options and I click on one that it goes straight to the blue screen. and he won't let
It starts with a system error, then what you wan to do? But everything I try just sent me the blue screen of death
and I have a Dell Inspiron 1525.
* I thought photos could help.
Come regular dell splash screen

Then this screen will appear:

I tried both options, both send me to the blue screen
http://i1099.Photobucket.com/albums/g385/cupcake197312/2011-06-23_185113.jpg
It's the exact screen that opens:
http://i1099.Photobucket.com/albums/g385/cupcake197312/2011-06-23_185019.jpg
And he won't. I can't even sign Windows. Please someone help me remove my screen
I even tried f8 and all its options, but it still does not boot to the top.

If you do not see the pictures that's essentially what shows blue screen
Its says "technical information:
STOP: 0x0000007B (0x80E03BA0, OxC0000034, 0x00000000, 0x00000000)
These are the errors

Hello

I suggest you to follow these steps and check if that helps:

Method 1:
Start the computer in safe mode and check if you can start:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

Method 2:
Try to perform the verification and startup repair if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

It will be useful.

Constant mini dump of blue screen in Windows Vista

When I'm at work on our public wireless network, I have connection problems, eventually leading to a mini blue screen dump. I can stay connected for 4 hours or 4 minutes... it oscillates continuously. I checked and updated my NVIDIA driver and have current BIOS. When on my home network (encrypted) wireless I never have this issue.

Below error code:

Signature of the problem:

Problem event name: BlueScreen

The system version: 6.0.6002.2.2.0.768.3

Locale ID: 1033

More information about the problem:

BCCode: 7f

BCP1: 00000000

BCP2: 00000000

BCP3: 00000000

BCP4: 00000000

OS version: 6_0_6002

Service Pack: 2_0

Product: 768_1

Files helping to describe the problem:

C:\Windows\Minidump\Mini110309-02.dmp

C:\Users\Kevin\AppData\Local\Temp\WER-57595-0.SysData.XML

C:\Users\Kevin\AppData\Local\Temp\WER3DAB.tmp.version.txt

Read our privacy statement:

Hello

Have you added a hardware or drivers updated recently? Check Control Panel - Windows to see updates
If all drivers have been updated it just before what is going on has begun.

For 7f - this might be a problem of material such as uncomfortable cards or memory, while there are other causes.
Power electric low could also lead to this. Use the troubleshooter below and when you get to the drivers and
segments of memory refer to my next post and then return to if necessary troubleshooting tool.

Cause

0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

Solve the problem

Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

--------------------------------------------------------------------

Look in the Event Viewer to see if something is reported on these reboots.

http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Unable to boot error on blue screen vista window

Hello

I use windows vista sp2 on the computer and am unable to initialize properly. I am at a loss for what to do.

That's what happened. My computer became infected with a nasty virus, so I tried to boot into safe mode. However, I got a blue screen with an error message that says:

"A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS SHUT DOWN TO PREVENT DAMAGE TO YOUR COMPUTER."

IF IT IS THE FIRST TIME YOU'VE SEEN THIS ERROR SCREEN RESTART YOUR
COMPUTER. IF THIS SCREEN APPEARS AGAIN FOLLOW THESE STEPS:

CHECK FOR VIRUSES ON YOUR COMPUTER. REMOVE ANY NEWLY INSTALLED HARD DRIVES OR HARD DRIVE CONTROLLERS. CHECK YOUR HARD DRIVE TO ENSURE IT IS PROPERLY CONFIGURED AND COMPLETED. RUN CHKDSK /F TO CHECK FOR HARD DRIVE CORRUPTION, AND THEN RESTART YOUR COMPUTER.

"I want to reformat my computer for Window XP, but after installation of window will display this error and once I started my pc this error appears again...". PLS help... Thank you...

jpaul08,
If your system has been infected then the best thing to do is to format the HD ANS reinstall factory default. According to the PC that you have, you must have a recovery partition or the recovery disk (most use partitions these days). When start you on the recovery media factory be sure to only select the 'Factory Restore' which will erase the disk and reload the operating system. The only way that you can switch from Vista to XP is now if the recovery media XP or you own a valid copy of XP retail. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

Blue screen in Windows 7 problem

This is info from the blue screen I have:

Signature of the problem:

Problem event name: BlueScreen

OS version: 6.1.7600.2.0.0.768.3

Locale ID: 1033

More information about the problem:

BCCode: f4

BCP1: 00000003

BCP2: 88393030

BCP3: 8839319C

BCP4: 82C67D50

OS version: 6_1_7600

Service Pack: 0_0

Product: 768_1

Files helping to describe the problem:

C:\Windows\Minidump\062610-44600-01.dmp

C:\Users\User\AppData\Local\Temp\WER-57704-0.SysData.XML

I am running Windows 7 on my Toshiba Satellite laptop. I get these during some time now. I checked the system restore, but when I got to my computer fixed some time they turned off so I have no restore points at all. It is only when I try to shut down my computer, and then it restarts after the blue screen. I don't have a virus, I did a full scan with Norton 360 first Edition more than once. I'm not able to download Windows updates, since blue screens started happening. Any help is appreciated!

Hello

Remove all power to the system:

Check and reinstall the memory - in fact, remove and replace - do not just tight. If you have more than
1 stick swap them in and out to see if the problem follows a stick or try the new memory. This
is rarely the problem though it may be. The connection of the hard disk may also cause so you
Maybe need to a single computer (not the leeks and the peaks at BestBuy or other BigBox stores) or
Support of Thoshiba - Check also with the Thoshiba Forums.

Toshiba - Forums
http://laptopforums.Toshiba.com/

Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

Toshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

Toshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

----------------------------------

Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top 3 answers.

http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

--------------------------------------------------------------------------

BCCode: F4 0x000000F4<-- read="" this="">
* 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

--------------------------------------------------------------------------

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

You can try a system restore to a point before the problem started when one exists.

How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista (also Windows 7) Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

Startup Options recovery or Windows 7 disk repair

How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.html

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Top Gun Afterburner Force feedback blue screen of Windows 7

Similar Questions

Maybe you are looking for