Application of re-signature Code

Similar Questions

• Restrict the application of Digital Signatures

  Hello

  I am trying to determine what options are available natively in Acrobat to restrict the type of certificate that is used to apply a digital signature.  AFAIK, Acrobat, default, seems to allow the use of a certificate that has the extension 'Digital Signature'  This has the potential to create big problems in a regulated environment.

  In my organization, our users receive multiple certificates for different applications.  For example, a user can have a certificate for VPN, one for SMIME email access and, finally, one that is specifically for the application of electronic signatures.  There is a more rigorous selection process for obtaining a certificate of electronic signature, and it also invites for a password every time that the private key is available.  Each type of certificate has a separate certification authority.

  We have configured the identities approved each user in Acrobat by deploying a file of address book for them.  We have only our CA electronic signature as a CA approved in Acrobat (with some other universally approved authorities).  The result is that, when a signature that has been applied by using any other AC, Acrobat does not check the signature.  It's good, but it isn't enough since the dynamic images that come with Acrobat digital signatures do not appear on the documents printed or flattened.

  Basically, I am trying to determine if there is a way to configure Acrobat (in native, out-of-the-box mode) such that it will only request digital signatures using certificates that are issued by an authority that is defined as a trusted identity.

  If anyone has encountered this before?

  Hi Mike,.

  You should apply the starting value for each signature field that you want to restrict. The starting value becomes part of the properties of the signature field.

  You can use the JavaScript debugger included in Acrobat. To select bring him the Advanced > Document Processing > JavaScript debugger menu item (providing you use Acrobat Pro v9).

  Here is an example of code that you can apply where you need a specific issuer and the use of the key:

  var f = this.getField ("Signature1");
  caCert var = security.importFromFile ("Certificate", "/ C/Documents and Settings / / My Documents/myCA.cer");

  f.signatureSetSeedValue({)
  certspec: {}
  Issuer: [caCert],
  keyUsage: [0x7FFFFFF7], //Insure the certificate has value KeyUsage nonrepudiation
  flags: 0 x 34 / / 2 requires transmitter + 32 requires the use of keys
  },
  });

  Let me know if you are looking to apply a different condition.

  Steve

• I lost all my startup applications is empty got code ox80070005 how to fix

  I lost all my startup applications is empty got code ox80070005 how can I fix this windows 8.1

  Willie, welcome to the forum.

  I suggest that you do a System Restore.  This will take your computer to a point when things worked correctly.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Update an application with DPS signature tool

  Hi Neil! Can you help me?

  How can I update an application with the signature tool?

  My application is in V.30, and I want to do in V.31. but I don't understand how I can do

  Thank you

  Francesca

  You do this through the online app for Android https://appbuilder.digitalpublishing.acrobat.com/#/login sign generator in, select the app you want to change, click the "pencil" to change up and rebuilt the app.

  Then you use the DPS signature tool to sign your APK Android with a cert

• Problem with BB JDE v4.6.0 signature code

  Hello

  1. work on BB Bold 4.6.0

  I got the recorded code signed keys on my m/c with BB JDE version 4.7.0 and it works fine.

  now I need to port to BB 4.6.0 version, so I installed JDE 4.6.0, in this JDE I'm not able to get signed my cod files.

  

  I got the error says "unable to save signatures until this application has been registered with all signing authorities required."

  Note:-only change in my m/c's IP has changed, I don't think that's the problem.

  can anyone help me please with this problem.

  Thanks in advance

  Ratna

  Thanks for your reply, I tried but not worked in this way.

  found another way to do it.

  4.7 copied. singtool next and launched with the COD file required.

  now it does not course unless tested on device.

• Launch application on KeyPress sequence - Code example included

  I searched this forum and google hours and could not get it to work.

  I used this thread:

  http://supportforums.BlackBerry.com/T5/Java-development/launch-application-on-12345/m-p/502771

  I have a background process which is a PhoneListener.

  It intercepts the void callInitiated(int callid) and checks the sequence.

  If the sequence is the right one, she injects an end key and starts the application.

  There are 2 problems:

  (1) the dialed number appears with? prefix and I can't seem to find the right channel for the game.

  (2) if I inject end, the call ended, but so is my application that I just launched.

  I tried waiting and I tried the function calls but no dice the reorganization.

  public void callInitiated(int callid) {
  
          String dialedNumber = Phone.getCall(callid).getDisplayPhoneNumber();
          System.out.println("!!!!!!!!!!!!  Dialed:" + dialedNumber.length());
  
          if (true || dialedNumber.endsWith(KEY_SEQUENCE)) {
  
              // end the call
          //  EventInjector.KeyCodeEvent ev = new EventInjector.KeyCodeEvent(EventInjector.KeyCodeEvent.KEY_DOWN, ((char)Keypad.KEY_END), KeypadListener.STATUS_NOT_FROM_KEYPAD);
          //  EventInjector.invokeEvent(ev);
  
              final UiApplication app = UiApplication.getUiApplication();
              app.invokeLater(new Runnable() {
                  public void run() {
                      try {
                          Thread.sleep(20);
                      } catch (InterruptedException e) {
                          e.printStackTrace();
                      }
                      try {
                          ApplicationManager.getApplicationManager().launch(
                          "MyApp?gui");
                      } catch (ApplicationManagerException e) {
                          e.printStackTrace();
                      }
                  }
              });
  
          }
      }
  

  any help?

  Thank you

  He solved.

  for some reason, the callInitiated (.) is called several times for each call

  Make sure that your code to initiate and end the call is executed only once (I used a hashtable and stored the callid) and you're golden.

• Writing to a file that is packaged in the deployed application (part of the COD file)

  Hello

  Thanks RexDoug, I got the link that shows how to read a config/prefs file included in the application code that I'm deployment.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/How_To _...

  However one thing, I realized that I also need to write to this file, so my question is: is it possible to also write to a file included in the deployed application? If so, any tips/sample code would be greatly appreciated.

  Kind regards

  Sean.

  Similar question on writing a file on SD card in this thread:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=55847

  I would use the name/value pair in PersistentStore approach to do this, which saves the duty serialize into a stream of bytes output to write the file.

• During the application of air download (COD files)

  Do I have to prepare a file for each version of Blackberry, I would like to have my application runs, that is to say of cod and jad. one for 4.5, 4.6.0 4.6.1 4.7?  Or is it enough to compile for 4.5 and it will run on the whole?

  What is the best?

  It is up to you.

  You can compile on 4.5 and move on all 4.5, up - but you may not be happy with the results, especially with the storm.

  We are currently building for 4.2.1 4.5 and 4.7. Our download page to detect the OS level and model of the device and redirects the browser to the correct JAD file.

• Application of gray Signature

  The selection of "Reqest Signature' under Build on JDE grayed out this morning. Anyone know what is happening?

  SignatureTool.jar is placed in the bin of your jde installation directory. You can use it as a normal windows program. It asks you to select a file of cod to sign, at least if your java is configured correctly and the file extension is defined in java.

  Otherwise, use java - jar SignatureTool.jar, add -? for other options.

  You can also use the SignatureTool as the program of choice for files of cod, this change in the properties of a file of cod in windows. the files of cod to sign, you can now DoubleClick.

  the keys have a limited number of uses, but it is very very rich and I doubt that anyone has ever reached its maximum uses.

• Can I develop applications android with edge Code CC?

  I googled for an answer, it doesn't look like I can, again I want to ask experts here if I can develop android with edge Code CC applications. Can anyobody please let me know?

  Edge Code CC is a code editor. There is no built-in features to help develop Android applications, but a person may have written an extension for this.

  Randy

• application manager gives error Code: U43M1U49

  Hello

  I had to run CS6 fine and up to date.

  Then I downloaded Photoshop elements 11 trial and installed to chek out.

  After uninstalling the problems started. So I uninstalled CS6, run Adobe creative suite cleaner and reinstalled CS6.

  But still receive the error code. It detects and displays updates but once started it says Errop Code: U43M1U49

  I've also updated to Lightroom 4 and Lightroom beta 5, thos run without problems.

  Have a good day, Raymond

  Hi Raymond,

  Please uninstall all Applications of addition / deletion Program (Win) or utilities (Mac).

  Please remove all Adobe files from these locations

  Win

  C:\Program Files

  C:\Program Files (x 86)

  C:\Program Files (x 86) \Common Files

  C:\Program Files \Common Files

  C:\Users\(your username) \AppData\Local

  C:\Users\(your username) \AppData\LocalLow

  C:\Users\(your username) \AppData\Roaming

  Mac

  ~Library/application support

  / Library/Application Support

  Once done then please reinstall all applications and try their update

  Kind regards

  Abhijit

• Application of RCC signature keys

  Hello

  I already went through this forum in order to have information on how to apply these specific keys of certicom.
  The information I have gathered is to send an email to [email protected]/[email protected] with the following information:

  Initially the name registered
  Initially registered company name
  Email originally recorded
  Initially recorded PIN

  I sent this e-mail 15 days ago and still no response from support of dev (including any email generated automatically with the id of the request).

  Is there a phone number that I could try to have more information?

  Thanks in advance.

  Send me this information for me in a private message and I can have a RCC key sent to you.

• Can I recorver signature code information if the system breaks down?

  
  

  If you are unable to access the information on the hard drive, then it is safe to say that your keys are lost at this point.  It would be easier to have your keys 'regenerated' that can be done by sending an e-mail to [email protected] with the following information:

  The origin of the name registered:

  Initially the name:

  Email originally recorded:

  Initially recorded PIN:

  They will find your old keys and generate a new game for you for free.

• My application does not (do not shooting) upwards when they are deployed on the device?

  Hello. First time here... a developer starting BB...

  I just built my first Blackberry app (Hello World) and now is trying to deploy on a real device. I use the plugin Java of Blackberry for Eclipse as IDE. As this is just a simple application requires no signature code.

  In the deployment of my application, I followed all the procedures (and all other alternative methods)... the application is deployed (or rather busy) on the device (I can see the icon of the application, etc.), but my problem is when I try to click on it to fire upward (nothing happens)!

  Additional information:

  I cleaned my project several times in Eclipse and after each cleaning I have package for the project...

  I used Desktop Software of Blackberry first to locate the .alx files...

  I even tried to use JavaLoader to load on the device that i have been successfully

  BUT the app is not put to fire/load upward!

  All developers experience out there care to shed light... ?

  Thank you very much

  I think that ive mysterically HM. solved my problem. I do not know if I have actually resolved but now I can launch my application.

  what I did was just completely reseting my camera (by removing the battery)

• BlackBerry Signature Tool + multiple .cod

  Hello

  For some reason when I try to sign my .cod file signing tool creates a second instance of my project so that he can sign.

  I tried to create a new project and move my files - but no luck.

  It looks like:

  Proj.COD not signed required RRT

  Proj.COD not signed required RBB

  Not signed Proj.COD CPR in option

  Proj - 1.cod not signed required RRT<>

  Proj - 1.cod not signed required RBB<----???? where="" did="" these="" 3="" come="">

  Proj - 1.cod not signed CPR in option<>

  Any help would be appreciated.

  JDE4.5 - Eclipse

  Thank you.

  If you change the extension of a cod in .zip file, you will see that on the biggest applications, you have several cod and these files are named - n, with the first file sharing always the name of file with your primary cod. When you build your project again its intention to build a new cod. This has no impact on the signature, but it is important when you write your jad.

  a good post on this subject is here: http://supportforums.blackberry.com/rim/board/message?board.id=java_dev&message.id=16073&query.id=22...