application of wireless network equipment, does not connect to internet

Similar Questions

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Update my wireless network device does not work after installation of Software Distribution Service 3.0

  After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0

  How did you receive the update?

  Was it via Windows Update or Microsoft Update?

  Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.

  Follow these steps:

  1. click on the Start button

  2. click on accessories

  3. click on system tools

  4. click on system restore

  5. click on next

  6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next

  After the collection of certain data, the computer will restart, and the update will be gone.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• I am able to connect to internet but when I switch to the amother user account it does not connect to internet

  on my computer, I am able to connect to internet but when I switch to the amother user account it does not connect to internet

  Hello

  1. Is there an error code or the message that if displayed when it is unable to connect to the Internet?
  2. You use a wired connection or wireless?
  3. You use the administrator account or standard account?
  4. All changes made to the computer before the show?
  Method 1:
  Check out the link and follow the steps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Method 2:
  Visit the link and try the troubleshooting provided steps.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• iPhone 5s does not connect to internet unless its connected to wifi

  I have a 5 s IPhone it does not connect to internet unless I'm at home connected to wifi. I can not send imessages or browse the web what should I do?

  You did that mobile data is turned on in the settings/phone/cell data?

  Also, make sure that the apps you want to use for the cell data are enabled in the list below these settings.

• New updates of Windows since 06/11/12 is originally Vista does not connect to Internet Explorer

  I have a desktop with Vista CAREB.  It has always worked well until about June 11, 2012.  Now it does not connect to Internet Explorer. It says it is connected to the internet and that has been verified by our server.  Tried everything and eventually restored it and no problem.  Then the next day, same thing and restored.  Next day same thing so I disabled all updates and no problem.  What new update windows made in the last few days which is the cause and what can I do?

  Thank you

  Hi Judy,.

  We cannot verify that Windows Update is causing the problem, I suggest to install the Windows updates one by one and make sure that Windows Update is causing the problem.

  Windows Update

• OfficeJet pro 8600 more connects wireless, but does not connect to Internet

  I use Windows 7.  The free thread is ideal for printing, but I do not understand why the web

  does not connect.

  Hi susea;

  Hope you are doing well and I'm sorry that you are having problems.

  Jean-Marie this tool;  http://support.HP.com/us-en/document/c02037530

  If that didn't help then share what router you're using, please indicate brand and model? I'll offer to make sure that your router is updated with the most recent firmware, also I personally always use Google's DNS servers. Some servers DNS provided by your ISP (Internet service Provider)

  You can change this setting by going to do the following:

  Press the Win key on your keyboard.

  1. Type Ncpa.cpl (this will take you to the network connections)
  2. Select your wireless connection
  3. You will see a screen on the botton, you will see a button called properties, near the left button
  4. On the Properties menu go to IpV4 (if you don't see scroll down) double-click to open
  5. In this screen, you will see (get IP address automatically) slot that you wil see the Obtain DNS server address automatically select this option
  6. Type 8.8.8.8 and 8.8.4.4 airfield

  I will also choose a static IP address, and this can be done here as well.

• HP dv6tqe does not connect to internet

  Ok.  My laptop does not connect to the internet. It connected to the wifi very well, but does not connect to the internet. I tried the wiring and that no longer works. All other devices connect correctly. I had this problem before about a year ago or not, and it was solved when someone said on one of updates windows, causing this problem. I uninstalled and everything worked well.  I am unable to conclude that now. The router is a Verizon Fios / Actiontec M142RWR router.

  I am running windows 7.

  Any suggestions would be much appreciated.

  Thank you

  Hello @knn9413,

  I read your post about how you are not able to access the Internet on your laptop, and I'd be happy to help you in this case!

  For more to diagnose this problem, I recommend later in this document on the troubleshooting your wireless network and Internet access (Windows 7), as well as the problems in Internet Explorer 9 or earlier versions (Windows 7, Vista, XP). This should help you navigate on the Internet once more.

  If you are still not able to log in, please follow the steps below to check if the laptop computer can communicate with the network:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"

  Step 3. Click on command prompt

  Step 3. Type 'ping www.hp.com' and press ENTER.

  Step 4. Now, I'd like you to record the IP address that is being crazy

  Step 5. Type 'ping '.

  Two pings succeeded? If this isn't the case, I would like to clear your DNS. You can do so by following the steps I outlined below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type "ipconfig/flushdns".

  At this successful? If this isn't the case, I would like you to reset the TCP/IP stack. To do this follow the next series of steps that I have set out below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. Type "netsh winsock reset catalog" and press ENTER.
  Step 6. Type 'netsh int ip reset reset.log' and press ENTER.
  Step 7. Restart your computer

  Then, if none of the above works I would that try you to install Windows updates in Windows 7. I recommend that ensure you that all updates are completed.

  Then, I would like that try you the next series of steps, I have outlined for you below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Windows Explorer"

  Step 3. Click on Windows Explorer

  Step 4. In the address at the top of the page bar try to distribute a video or download Google Chrome

  Then, if all else fails we will try to use using Microsoft System Restore (Windows 7) to restore your computer to a point in time before that this issue has been raised. This does not affect personal files that you have on your computer, but it will affect on the settings that you have changed or applications that you have installed since the time that you return to. These should be redone once we are finished.

  Finally, if we still have the issue we are at the point where we have to use the HP support document: backup of files (Windows 7) to backup your personal files. Once we did it with success I would like to see again you and follow the steps in the HP Support document: performing a recovery of HP (Windows 7) system, which will guide you through restoring your computer to the factory.

  NOTE: This will destroy everything on your computer in order to ensure that you have backed up everything you want to keep.

  reference: http://h30434.www3.HP.com/T5/other-desktop-PC-questions/Ethernet-not-working-on-slimline-desktop/m-p/3985804/highlight/true#M47729

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• HP Pavilion DM1: Laptop does not connect to Internet

  My HP Pavilion dm1 is not connecting to the internet.  I know it's a older laptop (I bought it in 2011) but everything has worked very well so far.  It shows my network is available and I was able to access the internet from my phone to my roommate, but my laptop does not connect.  I have tried all the usual stuff... rebooted the laptop several times, ran troubleshooting, unplugged the router and the modem.  I noticed it happened after I installed an update of Windows, so I uninstalled the updates and still no luck.  What should I try next?

  Hi @slmahan ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your problems of HP Pavilion dm1-3025dx laptop and with the wireless for Windows 7. Here is a link for the wireless connection troubleshooting.

  If you click on start and go to the Manager of device-Do you see the network map?

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system, it has built in support troubleshooting wireless.

  I would like to know how this happens.

  Thank you.

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• Equium M50-164 does not connect to internet

  I bought this laptop 3 months ago, and the wireless internet worked well. Now all of a sudden, it does not connect to wireless internet, so that the pc downstairs. It will not connect also if I connect to the router directly, or even through your phone line ADSL modem.

  Any ideas on how to solve this problem?

  Hello

  Please check device manager if the card network and wireless card are recognized correctly.
  You have installed any 3rd software or have you changed something? Did you get any error messages? Please post more information.

  Good bye

• BDP-S570 - does not connect to internet via wifi

  I just bought this today and it does not connect to the internet via wi - fi. I'm entering properly (my iphone, ipad and computers connect very well). I called tech support and they had no idea what either. I then connected with an ethernet cable, updated to the latest firmware and tried again with no luck. Does anyone have any suggestions? It shows that the wireless is OK, but Internet Access - failed. When I return to the guests and have it analyzed the available networks, it shows that I am connected... something is weird. I'm back if I can't make it work in the next day or so.

  Network problems can certainly be difficult to diagnose.
  Here are some useful steps to check where your problem is.

  Check the IP address: is it 192.168.x.xx? or 169.xxx.x.xx
  If you have an address 169 it is a fake connect.

  What kind of network do you have? It's a Modem/Router combo? This is a modem connected to a router and then your Blu - ray player.

  the router/Modem combos are more complicated, and you need to consult your provider of Internet services (ISP) to connect to help. (maybe a MAC filtering problem?)

  If you have a problem with your Modem/Router try get a router and connect to the modem, you can have the best success with a stand-alone router you will have with a handset as they are less complicated to use.
  If you already use a stand alone, try to temporarily disable your security and test it without warranty.

  is the firmware updated on your router (not the S70 but the router) the latest firmware is sometimes useful.

  Best regards
  Kimberly