Application remote control Apple and Apple TV 4

Similar Questions

• Problem remote control Apple TV (not the App)

  Hello

  I have an Apple TV (3rd generation) and the remote no longer controls.  I have it odd and paired again, but still does not work.  I downloaded the Remote app, but that does not give me access settings, and that's what I have to do.  We changed provider Internet and the need to configure it with the new password, so he goes on the network... Any suggestions?

  TKS

  SACA

  When you say that the remote control does not work, to what it means? It is not recognized? It is not a click? Installed new battery?

  I was using the Remote with ATV 3 years app and it works beautifully. If it is coupled?

• Anyone with the problem of not show apple tv on the same wifi to connect the new application remote control (with the last operating system both on device)?

  Tried to connect the new (launched in July 2016) Apple Remote app, I'm not able to add the Apple Tv from my iphone (5 c), because it does not show apple tv to connect even on the same wifi. I use the latest os on iphone and TVos 9.3.3.

  9.3.3 isn't the latest version of the software for your phone or your Apple TV.

  Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)

• delay connection remote control Apple tv siri after reboot

  Hi, when I restart my apple tv, remote siri doesn't respond for like 1 minute

  does anyone have this problem on reboot?

  Once my remote siri has not connect after reboot and I had to unplug my apple tv so she reconnected

  Please can someone he try on his apple tv 4, to check if there is a delay in the remote siri connection after restart of the apple tv

  Thank you

  Probably for about 10-15 seconds here.

• Battery of remote control Apple TV does not

  My Apple TV remote 4th generation does not load. Kept connected for more than 24 hours, reset.. bug that it still doesn't load. It works when it is connected to the power source. How can this be repaired? Is it possible to change the battery? If so, how? Thank you.

  Return it for a replacement

• The home button on the remote control Apple TV 4 does not

  By pressing the button home (the one with the screen on this topic) on my Apple TV Siri 4 remote is no longer working. Does anyone else have this problem?

  Try

  How to restart your Apple TV - Apple Support

• application remote control for atv4?

  Cannot find any official comment other than 'it does not work on atv4. Someone at - he heard of the iOS updated remote app to work with atv4? Text input is so annoying that my atv2 is about to be resurrected.

  Being a forum user nobody here can answer this question. We can only hope / assume that the remote application will be updated in the future but no confirmation whether Apple.  That also supports Bluetooth keyboards. The only way for entering text is on screen keyboard...

• Analysis of application remote control HP all-in-one

  I have the HP all-in-one, an application installed on my iPad remotely. Works well. I can't understand how to scan multiple pages into a single document. Does anyone know how to do this?

  Hi dedelstein,

  Welcome to the HP Support forums.  I understand you want to learn how to scan multiple pages of a document using the HP all-in-One remote printer app.

  Once you have analyzed the first page, you have the option to add another page, you just tap on the icon in the upper right corner that looks like a piece of paper with a '+' in the upper right corner of the page.  I have included a page for your reference.

  

• Android application remote control for Sony SLT - A58

  Have you ever tried to make an exhibition in the long term without touching the camera?

  Love to see the result of a sudden both?

  See Google for Android App RCCDroid game store.

  I downloaded the app... RCCDroid can you please tell me how to connect the allpha 58 and this app?
  Thank you

• Toshiba TL 938G - application remote dlna and toshiba problem

  I try to use the remote control feature and toshiba dlna app, but I can't when the TV is connected to the network via wifi.

  If I connect wired lan and pc or androind tv phone WiFi then everything is ok.
  I have tryied three different routers, but if all devices are connected wireless is not possible.

  I can use the dlna via wifi from my phone to the pc.

  The problem is with toshiba tl938g.
  The tv connects via wifi takes ip address normally and I use toshiba places without problem.

  I assume you mean on Intel WiDi because I found your other son on the Intel WiDi.

  You can use only one WLan connection at the same time.
  As far as I know that if you are already connected to the network using the wireless network card, you can not use WiFi to connect the mobile phone.

  So if you want to connect via Intel WiDi TV mobile phones you have to unplug the TV from the router.

• HT-CT380: A way to synchronize the subwoofer the Soundbar remote control?

  Hello

  I just bought the HTCT380 from Best Buy. It was an open box, so he came with a remote control. I was not concerned because this product has HDMI ARC, allowing me to use my TV remote to adjust the volume. (Also, the application is useful for adjusting levels, etc..)

  So far, I couldn't access the menu without the remote control. And, it seems, the only way is to synchronize the sound bar subwoofer to access the menu.

  Is there a way to access the menu without the remote control? (This sound bar has On / Off, input, pairing and volume buttons.) The sub has On / Off and sync buttons). I hope that there is a button combination that can get there, or if one or several buttons are required...

  If there is no way to access the menu without the remote, is there a way to bypass the menu and manually synchronize the subwoofer?

  Thanks in advance for your advice,

  Alex

  So, I feel a bit silly about it...

  I tried to move the subwoofer closer to the sound bar and it connected immediately. I don't know what it was because it was an ope - box, and someone had it synced already... or if it is designed to do this.

  This thread can be marked as resolved. If anyone has doubts for me this unit, I feel fairly well-informed having done a lot of reading. Very impressed with it.

• Remote control does not respond with Toshiba 24D3434DB

  I recently bought a smart TV 24D3434D.

  I was incapable of analysis for all channels when I bought because I didn't have an aerial socket in the room in which I used it, but I was able to use the tv feature smart until suddenly the TV displays a screen telling me that no channel was available and no longer responds to the remote control.

  I returned to the store and the tv started to react to the remote control again and they were able to search the channels it. When I House and rekindled it remote control not responding until I tried again the next day after I left it unplugged over night.

  In the morning, I found that the remote was working again until I plugged the tv in an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  Anyone know why this is happening or what I can do to fix this?

  Thank you.

  > In the morning, I found that the remote was working again until I plugged the tv into an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  What adapter do you mean exactly?

  The remote control works correctly if the TV is connected directly to the power grid?

  To be honest, it's the first time I encounter this problem.
  Perhaps some sort of light affect the functionality of the remote control, it is maybe s really a TV or remote hardware problem.

  I guess to see what s twist exactly you should test with a different remote or another TV and same remote control.

• Ability to save remote controls online

  Please give possibility to save remote controls online and then restore it after factory reset.

  At the momment is not posible but I'm sure everybody wants this for some annoying sound even go through the installer as 3 remotes every time.

  Yes well whatever it is have long ability to save and restore after a reset.

• Huh? "Remote Control Panel" came with the update of the firmware, LaserJet P4014n

  I have 3 Laserjet P4014n recently updated to firmware 20140127 04.210.5.  If I use EWS log in as local administrator I see there's a new entry on the tab named "Remote Control Panel. I'd love to see what he does, but I can't.

  With the help of IE11, I click on 'Remote Control Panel' and receive a alert 'ActiveX settings are required to use the remote control panel. There is an 'OK' button below this alert. By clicking on the button 'OK' makes me a "sorry, unsupported browser.

  I fooled with my settings ActiveX IE11 and not got anywhere. The documentation for the update of the firmware is vague.

  Can someone tell me what is this new feature of 'Remote Control Panel' intrigueing?

  Answering my own question:

  A couple firmware updates, this EWS feature has been removed from my P4014n printers but added to my printers LaserJet Enterprise M601n.

  I dropped the past months trying to understand what he's doing since clicking on it never did much. But today, I accidently clicked on 'Remote Control Panel' and got a double chart of the front of the printer with all the buttons (OK, up/down arrows, red X, home, back and a numeric keypad). There is also an option "restart".

  It's very cool like SAP M601n does not in any way to simply cancel a job stuck in the queue. I was remotely restart the printer.

• Apple Watch series 2: third-party Applications have control of gps, and exactly what kind of information you get when and after running?

  Third-party applications have control of gps, and exactly what kind of information you get when and after running?

  What I mean is can party like Strava apps or MapMyRun turn on and use the GPS for the courses?

  Also, the default running app, what kind of information you get? During the race, exactly what then I tell me? In addition, exactly what information can I see after I run? I would like to know whether or not she has the cadence.

  Last question: is it easy to verify my info running? Speed and natural lights?

  Thank you!

  Hello

  Information about the integrated training application - including data you can choose to display during training, and where the information is available to see later - are available here:

  • Work with your Apple Watch - Apple Support

  Cadence is not measured by the app to training.

  More information:

  http://www.Apple.com/Apple-Watch-series-2/