application wmplayer.exe error

Similar Questions

• application spoolsv.exe error.

  I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this.  Help, please.  * E-mail address is removed from the privacy *

  Hello

  1 did you change on your computer?

  2. what service pack is installed on your computer?

  3. when exactly did you receive this error message?

  4. What is the brand and the number of the printer model do you use?

  Method 1:

  I suggest you try the steps suggested by Anthony - Support Engineer from the below mentioned link and check if it helps. These steps are for Windows Vista and should work as well on Windows XP.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/spoolsvexe-application-error/0a7b0b15-77b3-4a8f-9465-dff8517c226e

  Method 2:

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  Method 3:

  I also suggest you to follow the link and check.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  See also:

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP

  http://support.Microsoft.com/GP/pc_print_methoddstoptheprin

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• (Redirected) Faced with an Application Restore7.exe error

  during the restore computer dell laptop inspiron 1545 to its original Installation factory with Dell DataSafe Local Backup 2.0 "in the face of an application error which is restore7.exe. Please guide me how to solve.

  Please this post in the portable computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Lexmark X 1130 gives me this error at the launch of the application: Application LXBKaiox.exe error.

  1. Lexmark X 1130 gives me this error at the launch of the application: error LXBKaiox.exe - Application, the application could not start correctly (0xc000007b). Click OK to close the application.
  2. What can I do?

  It is perhaps because Lexmark have not released a driver for Windows 7 for this printer:-

  http://support.Lexmark.com/index?ProductCode=LEXMARK_X1130&page=product&locale=en&UserLocale=en_AU#1

  There is a work around: -.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/a8cf7720-3259-4baf-b9dc-12c2d3ba9b19

  The printer still works under Windows 7, or you have just tried to install it?

• When I go to find the help I get of a help of application ctr.exe error message in windows xp

  Don't let me access antivirus protection

  Hi Billy,

  1 have you made changes to your computer recently?

  2. are - what you are talking about assistance by using Windows?

  3. what anti-virus is installed on your computer?

  I suggest you to follow the steps and check if it helps.

  Method 1: Scan your computer using Microsoft Safety Scanner in safe mode with networking and check if that helps.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  To use a safe mode with network option, follow these steps:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) use the arrow keys to choose Safe mode with networking in the Windows Advanced Options menu appears, and press ENTER.

  Method 2: run System File Checker and check if it helps.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

• Application error wmp.dll, worm 11.0.6002.18311 wmplayer.exe pop up States stopped the windows media player.

  How can I fix this error?

  Failing application wmplayer.exe, version 11.0.6002.18311, time stamp 0x4c8e2d72, failed module wmp.dll, version 11.0.6002.18311, time stamp 0x4c8e47da, exception 0xc0000005, offset error 0x003e95a8, process 0x240c id code, start the application time 0x01cc1568be64f843.

  Three days so far.

  16/05/2011 01:21

  17/05/2011 19:31

  18/05/2011 19:34

  It seems that Ulead Photo Express 4.0 is not compatible with Vista:

  http://Forum.Corel.com/en/viewtopic.php?f=9&t=22181

  You will probably have to get a newer version or switch to another program.

• Schedule for the opening of the application on Tungsten E Palm.Exe error

  I have a Tungsten E (no disc of original material) which was working fine until yesterday. I can't open my calendar, even though I can open all the rest and receive an application Palm.Exe error. "The Exception integer division by zero".

  "(Oxc0000094) occurred in the application at location Ox67cz6F22. When I try to send the error message, it freezes all the Palm application. -Without the installation discs original can I do? Delete the files from my hard drive (and if so, which ones) and then re - sync? Instructions are appreciated.

  Click on the following link to the support page for your device on the kb.palm.com Web page.
  http://www.Palm.com/us/support/TUNGSTENE/

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  There is a link on this page for Palm desktop that you can download.

  Here are the instructions for XP to uninstall "own."

  You should first make a copy of your data to have just in case something
  is happening. You can find your data files by going to C:\Program Files\Palm or
  A Palm. Highlight your Palm Desktop user name and right click and copy.
  Then, go to the desktop of your PC, right-click on a blank spot block and select.

  Now you want to uninstall Palm Desktop and remove anything that has to do
  with Palm Desktop on your computer. As the folder above, remove the Palm folder. Once this is done, you need to delete some registry keys
  your registry PC operating system.

  Word of warning, go here and removing the wrong thing can cause your PC
  No start, crashing and deleting programs and data. If you feel
  you're not sure of yourself, see if you have a friend who can help you or a
  PC technician that you can pay to help you. This will show them all
  Should be deleted. To keep your current registry settings, we have a backup of the registry.

  On the PC, go to start and run Type "regedit" without the quotes

  Select WORKSTATION, browse to the file--> export. Should appear with a save as
  box. Current place of residence is very well should be in My Documents, or you can change in a location that you will remember. In the file name box, type "Regbackup [todaysdate]" i.e. Regbackup07072008. Then, the most difficult part.

  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. It will ask you, are
  make sure you. Say Yes. Do the same for all the keys below.

  If you make a mistake, stop what you are doing. And call a PC technician.
  BUT do not turn off your computer.

  The reg keys are as follows (Note: some of the theses reg keys won't be here)
  But if they remove them)

  * Installation quick HKEY_CURRENT_USER\Software\U.S. Robotics\Palm
  * Transfer of files Robotics\PalmOne HKEY_CURRENT_USER\Software\U.S.
  * Robotics\Pilot Office of HKEY_CURRENT_USER\Software\U.S.
  * HKEY_CURRENT_USER\Software\Palm
  * HKEY_CURRENT_USER\Software\Palm, Inc.
  * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
  * HKEY_CURRENT_USER\Software\palmOne
  * HKEY_CURRENT_USER\Software\PalmSource
  * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm

  Then restart your computer

  Then, reinstall your Palm desktop from the CD and do a hotsync. If she asks
  for a user name and you synchronized your device before you put "test" If you "
  no sync before create you a hotsync name.

  Message relates to: Palm i705

• application HPLaserJetService.exe

  After a successful printer install firmware upgrade and I now get an application HPLaserJetService. exe error and unable to connect to the HP Toolbox.  The application of the SPHP found no error and the printer works fine on my connection USB and Airprint but the HP module hppccompio.dll has an application error.

  It seems other people have this problem but I don't know how to fix it.  Some advice would be very grateful.

  Hi gallagtj,

  Run the firmware update and then uninstall the printer. Restart the computer and reinstall the printer using lsecond link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=LJ-86473-8 & CC = US & DLC = in & LC = on & os = 228 & Product = 4052980 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=LJ-86470-3 & CC = US & DLC = in & LC = on & os = 228 & Product = 4052980 & sw_lang =

• AccelerometerSt.exe error on the computer Windows 10 brand new

  I have the same problem that many others have with the Application AccelerometerSt.exe error.   BUT, I have a brand new - 1 week old computer and it came with 10 windows already on it.  I have the HP Envy x 360.   How do you intend that to solve the problem.   If you uninstall and reinstall Windows 10, I'll need much more detailed information.   I don't know how to do this - which was the reason why I only watched computers with her already preinstalled.

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• AcroRD32.exe error

  Whenever I go to open a PDF file to read it I get an AcroRD32.exe error that says unknown software exception (0 x 4000015) appeared terninate click Ok.  This closes the document so I can't read it or print it.

  Hello

  You can view the following link once and see if that fixes the problem.

  Acrobat.exe, Acrord32.exe exit | Close browser. Windows

  You can also check the following thread and perform the steps mentioned.

  Application AcroRd32.exe error

  Let us know how it goes.

  Concerning

  Sukrit diallo

• Windows media player has stopped playing DVD application name error: wmplayer.exe

  Sudden question.  Here is the report.  Win 7.  Attempted to update AMD and several other drivers and I tried to uninstall and reinstall the player twice already. I've tried player KM without any result either. Here is the report.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: wmplayer.exe
  Application version: 12.0.7601.18526
  Application timestamp: 53b9f236
  Fault Module name: StackHash_2aa9
  Fault Module Version: 6.1.7601.18247
  Timestamp of Module error: 521ea8e7
  Exception code: c0000374
  Exception offset: 000ce753
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 2aa9
  More information 2: 2aa992e93c22ae397a4f2bd930f8cc48
  Additional information 3 c: 86 6
  Additional information 4: 86c67d88c87e301470ffa242ae4a3798

  Hello!

  This is the recent update KB3004394 which makes the problems.

  Either you uninstall it and restart.

  Or install you KB3024777 .

  See the response of the Stephanie Podder here Microsoft employee: https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-kb3004394-issues/ace25277-7f65-4486-bc44-c1b106907a18?page=18&tm=1418460808873

  "

  Hi all

  We released KB3024777 to address issues that some customers were having with KB3004394. Customers who have activated the Windows updates don't need to take action. Customers who have disabled the automatic updates must uninstall KB3004394 manually by following the instructions in KB3004394.

  Thank you.

  "

• Application error - wmplayer.exe. The 0x04a3195d referenced memory at 0xd48642b1 instructionat. The memory could not be used.

  Title: Windows 7 media player

  When I try to open a video file, I get a message:

  Wmplayer.exe - Application error

  The 0x04a3195d referenced memory at 0xd48642b1 instructionat.
  The memory could not be used.
  Click OK to finish

  That means this average-how can I overcome it?

  Thank you

  Hello

  -Respect the limit with the specific video file?
  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the link and check if the problem persists.
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
   
  Method 2: (SFC) System File Checker
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  To run the System File Checker tool, follow these steps:
  (a) click Startand type cmd in the box start the search.
  (b) right click on cmd in the list and then click Run as administrator of and programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  (c) at the command prompt, the following line and then press ENTER:
  sfc/scannow
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
  http://support.Microsoft.com/kb/929833
  Method 3: I also suggest you to restore of the system from the link and check if that helps.
  Perform a restore of the system to a point prior to the show and check if this solves the problem.
  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Method 4: I also suggest you to turn off the setting Data Execution Prevention and check if that helps.
  Change Data Execution Prevention settings
  http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings
  Hope this information helps.

• Failed application Surescripts_borero.exe, Source: Application error event ID: 1000, the task category: 100

  Need solution for Application error.
  Error details:
  Log name: Application
  Source: Application error
  Event ID: 1000
  Level: error
  User: n/a
  Connected: 10/01/2012 01:42:21
  Task category: (100)
  Keywords: Classic
  Computer: Suitemed_DB2

  Details:
  Failed application Surescripts_Borero.exe, Version 14.0.0.0, time stamp 0x4bce57d1, failed module pbdwe1154.dll, version 11.5.1.4740, time stamp 0x4bce57fe, exception 0xc0000005 code,

  I faced this error more than 200 times a day. Necessary solution.

  Thank you
  Manon.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum.

  Please find the link below,
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information is useful.

• Explorer.exe error of Application the Instruction at '0x7c910ed2' referenced memory at 0x03ede088.

  always get this when I try to open certain files? any suggestion will be good?

  Explorer.exe error of Application the Instruction at "0x7c910ed2" referenced memory at "0x03ede088", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  I also have error of Application Explorer.exe the Instruction "0x7c911689" referenced memory at "0 x 04180000", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  Good.

  Not sure what it is yet, but you know what it is not.

  I don't know what to think of your permissions problem, but if records are read-only and not meant to be, are you not able to change the folder properties and what happens when you try to do?

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, and then restart and try again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• winver.exe error, error code "winver.exe 0xc0000005 application error".

  Title original: winver.exe error

  I had this problem "application error 0xc0000005 winver.exe".

  someone knows how to fix this?

  Hi Helel,

  1. When you get this error message?

  2 have you made changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Step 1: Start in safe mode and check if the problem persists or not.

  A description of the options to start in Windows XP Mode

  Step 2: If the issue is not reapper in safe mode, perform a clean boot, and then check that it helps if you can skip this method.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.

  Method 2: Run the System File Checker scan and check if it helps.

  File system (CFS) Checker