Applications of BB development plug-in in Eclipse under OS 6

Similar Questions

• Java plug-in for Eclipse or BB JDE BB

  Hello developers BB!

  I am really new to the BlackBerry development world as you will see.

  I started to read some of the tutorials and there is something that I'm not sure. What is the difference between BlackBerry Java plug-in for Eclipse and the BlackBerry JDE? Which one should I use to develop my applications?

  I'll take this opportunity to ask, is there a graphical development environment to develop applications? or do I have this code? I ask this question to the General knowledge.

  Thanks in advance for your time and help.

  Best regards.

  You should encode everything, there is no GUI Builder. Eclipse is the way to go, JDE is removed out sooner than later.

• Plug-in for Eclipse: how to compile a source in several binary files?

  Hello gurus of BB,.

  recently, I spent my development environment of JDE for the plug-in for Eclipse (mainly because the new Blackberry7 is only available for Eclipse). I was able to transfer my apps; one thing remains to be done.

  Knowledge, I would like to compile the same source in two applications: a Lite and a full. Source code, as I said, is completely identical for both; the only difference is in the metadata (icon, name of the application, etc.) and in the fact that once the compilation of the version Lite, I #define a variable (in the source code, there is a certain //#ifdefs).

  How could I do in Eclipse? In JDE, I simply create a workspace and two projects (.jdp files) inside they can share sources. But in Eclipse, the Application descriptor does not seem to support that?

  Eclipse is very deficient in this way.

  That's why I use Netbeans + BB Ant tools to do all my Blackberry development.

  It provides very easy access to the configurations, a great support for ANT and support of editor/preprocessor much better compared to Eclipse.

  I losers to Eclipse debugging Department, so I created an ANT script to copy the files required in JDE and use it for debugging/profiling.   It is possible to get Netbeans to work with the debugger, but requires a lot of work and is obviosly a config not supported.

  A click or script executed and I have 12 + packages of different distribution ready to be distributed OTA/Desktop/BES all carefully packed in their respective folders.

  Configurations + several builds support has been expressed in BB repeatadly plug so far into the team, but no change.   I know that I'm not a point to track down the leads/developers of plugins at each conference of BB and put up a point on the configs... maybe next year that's going to stick

  p. s.

  You can get the 7.0 files outside Eclipse... you really have nothing other than the Javadocs and the net_rim_... jar, perhaps Cap updated as well.   All of you who are located in the folder of the eclipse plugin.  Just copy JDE6.0 and replace only the files required with the version 7.0 and you are ready to go.

• BlackBerry Java plug-in for Eclipse plugin vs for websphere studio device developments

  Hello world

  I am at a loss, because I can not even begin to help in the development of websphere studio device, because I can't find any plug-in for it, for my body I have to use this IDE which is Websphere studio as an IDE device development to develop my app for BlackBerry 8310, so I look to find how to test my java application measures  , so I find BlackBerry Java plug-in for Eclipse ", my question is are there any plugin fo Wbsphere IDE, and there is a way to use the same plug-in of eclipse for me.

  Thank you;

  can't answer the first question that I don't ever use websphere - if you want to use it, you will find a way, if not I suggest you switch to eclipse.

  Yes, you must generate the Cod. It cannot be run without generating the binary file.

  FYI: we use eclipse as editor-in-Chief and the jde as a tool to build test /.

• A few questions about plug-in for Eclipse

  Hello! I installed BlackBerry Java plug-in for Eclipse v1.5

  [Name of the file: BlackBerry_JDE_PluginFull_1.5.0_helios.exe]
  [Download size: 472,909 MB]
  [Date of publication: 18/10/2011]
  but I have some problems with it.
  Where can I download Java (JRE) version 6.0 for Eclipse SDK to develop for BlackBerry OS 6?

  You can install the other BlackBerry Java SDK using our BlackBerry Eclipse Update site.  You can find instructions on this here: http://us.blackberry.com/developers/javaappdev/javaupdate.jsp

• WHAT APPLICATIONS CAN BE DEVELOPED FROM SQL SERVER 2012

  I need to know what applications can be developed using SQL SERVER 2012.

  Hi, Chris,.

  This is an overview of SQL Server 2012

  http://www.Microsoft.com/sqlserver/en/us/product-info/overview-capabilities.aspx

  SQL Server 2012 application development

  http://social.technet.Microsoft.com/wiki/contents/articles/6982.SQL-Server-2012-Developer-Training-Kit-BOM-en-us.aspx#Module_5_SQL_Server_2012_Application_Development

  Post your query on TechNet Forum to get help

  http://TechNet.Microsoft.com/en-us/SQLServer/ff898410.aspx

• Developing BlackBerry applications using visula studio plug-in

  Hello

  I'm new to the Balckberry app development.  I use the plug-in for Visual studio (V 1.2).  I am developing an application in which if

  an address is given in a text box, I want to show the address into a google or Blackberry card.  And then find other interesting places

  That is to say close to the given address. pizza store. Is there an API for visual studio for this type of application.  Please show me some directions

  How to go about

  Thank you

  If you create this with a web page, you can have them submit the address and the pass to google maps via a URL.  Or you can build a URL that will open BlackBerry maps.

  It is not a specific API to do this, it is not a matter of piecing together different websites in a mash up.

• BlackBerry tablet java-plug in for eclipse

  is thr all connect java to eclipse for sameway of black berries as smartphones have?

  If yes pls send me the links.

  If no r are these 3 s/ws needs to develop applications for blackberry Tablet? :

  1 adobe Flash Builder 4.6

  2 adobe Air SDK

  3 blackberry Tablet simulators (OS 2.0)

  o if its different?

  PLEASE ANSWER AS SOON AS POSSIBLE... ITS URGENT!

  Not sure exactly what you're asking. You ask if there is an eclipse environment to develop for the PlayBook. If so, do you have FlashBuilder (Adobe) or FDT based on eclipse.

• Help w / BB SDK installed plug-in for Eclipse

  Forgive me if I am problem with everything I post here, I'm as inexperienced and little educated with Java and everything associated with it, hell, programming in general.  My knowledge begins and ends with the basic html coding.  But, I have a great idea (I think) for an application and do my best to learn Java on my own.  What I'm having a problem with is just install the Blackberry SDK and others for Eclipse.  Shortly after the installation starts, and it always gets stuck on the extraction of net.rim.ejde.componentpack5.0(substitute through different versions of OS here, 4.5, 5.0, 7.0) status text continues with ...nloads.blackberry.com/upr/developers/Win/

  Now, I don't know if it of related or not, but when I did the initial download of Java (jdk1.7.0_06), a window pops up warning me that some banks were too long or something like that (even once, forgive me ~ _ ~).  I tried to put everything I downloaded in ProgramFiles (of course it comes to Windows I'm talking about).

  Anyway, Ive tried to be helpful by giving everything I know I did, someone please help me, if I can't even the installation done, Lord help me when I'm in a coding application

  Well, I am a java developer, but java BB is not the path to the future, as the new OS (BB10) will support is no longer, so the question is if you really want to go this way.

  as a start page, I suggest using
  https://developer.BlackBerry.com/
  you get a good overview here.

  about html5, there are many different points of view, and some say it's not feeling not native (sensitive) enough, while others think it is the best thing ever.
  side pro, you can use html5 on Playbook and BB10 (as well as other platforms non - BB).

  If you don't know not java the platform BB is bit harsh as a learning ground, and most of the tutorials assume a basic knowledge of java.

  I suggest trying html5, you should find most of the things on the site link above, otherwise, there is also a forum where, someone more familiar with it can help you.

• How to develop faster by using Eclipse?

  Hello world! I need help - I am developing a new application for my blackberry (standard CLDC app), and I use the JDE 4.5 with Eclipse 3.4.1 + bb development plugin pack. The problem is, it takes so long to actually test the application after each generation - I have to wait for the (bb 9000) Simulator to start, or send them manually through javaloader program to my blackberry, but in most cases resets after each update. This means that, after each rebuild, I have to wait 3-4 minutes until I can start testing. It of very frustrating and slows down the whole process a lot. Is it possible to do it faster? I'm a C++ programmer and never really used Eclipse before, so maybe there is something I don't know, and if this is the case, please help me :-)

  You can launch the Simulator without the debugger: http://supportforums.blackberry.com/t5/BlackBerry-Developer-s-Blog/How-to-Set-up-a-Lightning-Fast-Bl... networks, webservices etc can also be tested with junit if encapsulate you your code

• Cannot install point BlackBerry Java plug-in on eclipse

  Hi guys,.

  im sorry newbie and im just trying to create applications for BlackBerry smartphone,

  who can help me?

  I need step by step how to create a native application.

  have a sample for native applications?

  IM used eclipse helios 3.6.2

  Ty

  Gallez better to start the thread for the header image.

  And to explain in more detail what axactly you want. If imaging is a problem that it is simple to create images

  If the problem of image setting then explains in detail. When your adding image than what problem your facing.

  Start the new thread so that people more will come for the answer.

• application of exhausted development pool

  Hey people,

  I see the following in the console when you try to run my application on the Simulator:

  Any chance you have about 500 applications installed on your device at this moment?

  If this isn't the case, then it seems likely that you have reached a deadline that they speak to us, which I suppose you can get around quickly by installing a new Simulator and starting over with her.

  Each app is installed with a new user name (actually, just a uid number) that is generated dynamically.  For some reason, I can't guess, they may have decided that they could manage to support 500 of those in development mode, and you have installed apps that several times and run out. (If Yes, congratulations for apparently being the first!)

• steps to update of application in the development environment runtime environment

  Hello

  I have APEX 4.2.6 development environment and same version runtime environment.  There is little change, which happened in the forms and the underlying objects in the DB (developing approx.).  Help me please in the list of the steps needed to apply these changes to the runtime approx.  To my knowledge, I should 1st sync DB objects and then take application export development and import at run time.

  Can you let me know how to synchronize objects DB?  Dump export and import is not possible because "runtime" environment has the most recent data changes.  Otherway is to make changes to the DB object individually and manually.  Is it possible that this can be done using scripts/tools?

  And what about import application?  Is it just connect to the 'runtime' DVRs. SQLPLUS and run @f110.sql?  Please let me know the exact steps.

  Thank you and best regards,

  -Anand

  Hi anand_gp,

  You mean (for the import of application), I need to execute all the steps below to update the existing application (get the workspace ID, approx. set ID, etc.,)?

  And thank you to provide links on how to modify objects in the DB.  I'll go through them.

  Yes, and it will create a new application in your workspace.

  If you want to have the same id of the application (whether it is your production application), you can delete the existing application using APEX_INSTANCE_ADMIN. REMOVE_APPLICATION (remember to commit after each step) and then import with above in the light of the steps.

  If you want to have both the old and the new application in your production work space, you can use the alias of the application while publishing the URL.

  When you deploy a new version of the application, simply change the alias of the application, so that it becomes your current application.

  I hope this helps!

  Kind regards

  Kiran

• Flash builder as a plug-in in eclipse burrito

  is there such a release planned for the beta period?

  Yes - aware Burrito preview also works as an eclipse plugin with your own copy of Helios.

  Unlike previous versions of FB, where separate downloads for autonomous in relation to the uses of plugin Burrito, a consolidated Installer includes who always has a copy grouped the Eclipse IDE for Java developers. By default, Burrito runs on top of this copy Group of Helios.

  After installing the Burrito, you will find a Utilities folder alongside the Flash Builder application which includes a plugin utility, you can use to associate your own copy of eclipse 3.6 the Burrito. Burrito currently, requires Helios 32 - bit and 32-bit cocoa Helios on OS X.

  -Chris

• Installed plug-in in Eclipse 3.3 FB3 does not install editors

  I decided to upgrade to Eclipse 3.2 as it has been suggested in the forums that could improve stability under Windows Vista.
  
  I installed Eclipse 3.3, then ran the Beta1 FB3 install to install in the new installation of eclipse. Installation completed successfully, but after you open eclipse I get errors when it tried to load the file editor open source. It basically says that com.adobe.flexbuilder.editors.derived.something could not be loaded or something like that.
  
  I thought maybe it was because I had not uninstalled the FB3 plugin everything first I uninstalled, unpacked a new copy of eclipse 3.3 and then installed the FB3 plug-in again. The same problem.
  
  Inspect the plugins of my eclipse installation folder, I noticed that the com.adobe.flexbuilder.editors.derived_3.0_172437.jar file was not unpaced, than other editors (mxml, actionscript, etc.) have been. So I unzipped the com.adobe.flexbuilder.editors.derived_3.0_172437 JAR and started to Eclipse, and this seems to have solved the problem.

  On further investigation appears not to be an installation problem, but rather a problem of permission of Eclipse. The JAR file is installed and I believe that the expected behavior is that Eclipse decompresses automatically ("active") when it is first needed. Permission denied errors noticed in the Eclipse newspaper about the bundle activation failure. I saw the same problem for the Publisher of Java (org.eclipse.jdt.ui).

  I don't know why Eclipse will be impossible to activate the beams, however. As far as I can tell everything in the workspace files and eclipse belongs to me and I ran a "takeown/f/r' both to make sure, but it still does not work. I vaguely remember similar problems when I installed Eclipse 3.2 on Vista initially.

  Some Eclipse records had not u + w permission however, but even if these files (and their parents) belonged to me I could not chmod them unless the command interface "Run as Administrator", which is strange.

  In any case, after taking care of permissions on files now everything seems to be fine.