Applying master pages, the work is lost

Similar Questions

• ExtendScript running to "Apply Master Pages"

  Hello editors,.

  In the Toolbox for extendscipt Data Explorer, I don't see an option to apply templates to a document (as in Format-> Page Layout-> apply Master Pages...).

  Should this function not any? Am I missing something?

  Thank you in advance!

  Hi Roman,

  The return code is always 0 for Fcodes and is not FA_errno either. In other words, just assume that the command really worked, or find a way to check all the documents after you run the ApplyMasterPages command to make sure the result is what you want.

  To see if it really works, create a document with a few pages, set the rules in the StructMasterPageMaps (for structured documents) or the table of UnStructMasterPageMaps, then run the command apply Master Pages via the menu and see what the document looks like. Then manually cancel one or several pages of body in the document, and then run the ExtendScript and check the result.

  Good luck

  Jang

• How to apply master pages across sections or whole

  This is a very basic problem that I'm not easily find the answer in the research. I have to apply master pages and consistently, no matter how, I format the query, am advised: "one or more of the specified pages aren't valid page names." So please give an example of how the page/section names are supposed to be written for:

  A book of 100 pages with article 1;

  A book of 100 pages with article 2;

  Application of the changes to the master page to only one paragraph of the book (pages 50-75).

  I know this is similar to "Sec1: 1-100 ', but not exactly the same thing.

  OK, I think I begin to understand what you are doing. You try to use the menu of the Pages Palette to apply a Master Page to a range? You must include the section number for two pages, like this: Sec1:1 - Sec1:100.

  You can also select the pages in the range first, then use the command master apply. It's perhaps easier.

• applying master pages to the pages of the document, can't drag any page icon that the hand tool loose when I move my mouse.

  I am a student at the University of anchorage Alaska system.

  I am a student in inDesign adobe cs6 with the classroom in a book, I'm going through the book and have a problem with a long head.

  When mastering pages and I'm trying to drag and drop the page icon mastered to pages of documents icon the little hand loose when I move my mouse.

  Similarly, when I drag and drop a page icon to another icon of documents documents hand let go when I move my mouse.

  I restarted saved and recreated my documents, that nothing seems to solve the problem

  Help!

  I am running an hp Pavilion AMD APU A10 - 5750M with clocked at 2.5 ghz, Radeon HD graphics card

  I have 8 GB of ram 64 bit op X 64 based processor, I have a 750 GB drive with more than 60% free space

  I believe that my system can handle CS6

  win 8.1 current as of 02/05/2015

  My problem was that when I take and drag the page contained in the pages Panel icon, then place the cursor on the page icon of the document I wanted to apply mastering too.
  It did not show the hand with the icon of the master, or the border turn dark, waiting for the fall to apply the format of mask, hand became the pointer.

  I followed a suggestion to viola "remove-reboot-re install - restart" it works now!

  Unknown problem with the first installation

• If I put a script in the header of a master page will work on all pages related to this basic form?

  If I put my google analytics script in the header of the master is it works on all the pages related to this basic form or should I put the code in the header of each individual pages?

  The master added to the page code will be added to all pages based on that master and perform accordingly.

  Thank you

  Vikas

• Apply Master Page to a single page in a multi-page form

  Hello

  I have three master pages, one for odd pages, one for even pages and which should be applied on the third page. The third page is a page layout sank. But I want to apply the master page, third only to the third page. How do I get there?

  Thank you

  Hello

  Under the tab pagination of the palette object of the subform that (or page) is to go to page three, you can select "place" the "on the page", then all that you have called the master of the third page (page 3 by default).

  Concerning

  Bruce

• Applying Master Pages

  I created a new project and created multiple master pages with elements, such as headers and lines running to. But, when I apply a master to a page where I want anything to show, using the [none] selection lines are still present on the page I apply it.

  Thank you.

  This element of the line crosses the spread on your master page?

  If it is a straight line, just break in half to the gutter. Any element that runs through the middle of a page, master page, is considered to be part of the master page (even by the smallest amount)

  So, if you put a blank template to the left page or a spread right you will continue to see everything that is superimposed on the master page in the face.

• Apply master page

  Hello

  I have a task to do in javaScript, I'll explain here,

  If I find a style (paragraph Style) .indd file, page that contains must replace with speciefied Masterpage which i m mentioning in my script.

  Please let me know an idea or a technical problem.

  Thank you

  Christy

  Check out this old thread with my experimental script for this.

• How to apply a master page to several documents at the same time?

  How to apply a master page to several documents at the same time?

  > The format of the page master is get imported, but the first page of all documents still remain with the format of page master default 'right '.

  AMP?

  Some content is unique to the first page mapped on master page first in the table to:
  View > reference Pages... MasterPageMaps

  That page and table do not exist by default, incidentally.

  and you make a:

  Format > Page layout > apply Master Pages

  After doing the import?

• Fireworks master page adapts to the he's happy and apply to only a few selected pages?

  Hi all!

  I use the PNG Fireworks format to save all the pages of the websites that I build. However, when I apply a master page in a Fireworks project, all subsequent pages have this applied master page. Sometimes it is necessary to have a page without the master page applied to it, but I can't seem to find how to do this.

  Another difficulty, I fell on that is not be able to make the master page to adjust to its content, just like regions editable in Dreamweaver model, for those who know what it is. Is it possible to do in Fireworks?

  Greetings,

  Casal André

  André,

  Regarding your first question, we could think that the drop down menu panel Pages might have a command that you would release a selected page of the master, but apparently not. However, if you select the page and go to the layers panel, you can display the Master Page layer in the bottom of the stack. You can set the visibility of the layer or its components, or go to the menu drop-down in the layers panel and choose Delete Master Page layer.

  Regarding the second question, I don't think that it is possible for a page master to "adapt to its content. Per, I'm guessing that you mean to respond fluidly to the other elements on the page, whether they are long or short, etc. It is a property of the web pages, where everything is "outstanding". But Fireworks uses a different system.

  I'm still new to the feature Pages myself, but have you tried the options "Share layer" menu drop-down in the layers panel? These could offer some of the benefits of the feature of the master page, but with more flexibility. The symbols are also something to consider when you want to repeat the elements in a document.

• Master page is not applied to new pages

  I created a site with several pages using a single master page. When I add new pages to the menus menu or sub the master page is not applied. The master page includes the header and footer elements. Newly created pages have these elements, but they are all mixed. It's as if he's using an old version of the master. New items added to the mask are not applied to newly created pages. I tried to stop and restart, remove the master page, the formatting of the new page and re - apply and nothing works.

  Help, please!

  Hello Catherine,.

  I have checked your file and was able to reproduce the problem on my end as well.

  However I noticed that the question is because when I add a new page to your site, its page by default 400px width,

  While he should be 960px, depending on the width of your Mater page.

  For now the workaround for problem solution will be to make the page width equal to that of the master page.

  I illustrated below

  

  

  This is a very unusual behavior, we will continue always to do more research on this issue and to repair.

  Best regards,

  Ankush;

• Can I apply a Master Pages 1 Page 2?

  Hello

  Is it possible to apply 2 Master Pages to 1 Page?

  Whenever I'm trying to apply second master, the attributes of the first disappear.

  I work with InDesign CC.

  Thank you

  Joanna

  Create a Master Page that is based on the master page that you want to keep the items.

  In the new Master Page, the original master items are locked to this basic form - and you insert additional items.

  Apply your new master page Page for that you need.

  Using InDesign | Master pages

• Frame12 include master page or page reference objects in the HTML Help output?

  Hi, I'm looking for a copy of FrameMaker 12.

  While I can do a lot with the settings available in the dialog box publish, there still doesn't seem to be possible to include objects from Master Pages or reference Pages in CHM output?

  When you use TechCommSuite, I can work around this by applying "Master Pages" within RoboHelp (for example to add a standard footer to each theme and with a small logo of declaration and copyright society).

  It's not like there's a way to do it with the command post of Frame12? Or am I missing something?

  David,

  If you look in the outputs > General properties of the publication settings page, there is now an option to import the HTML template file. The option type of works in a way bass-ackwards, you click on the box first, then you get a window to select the file and then you must click on the button import.

  

• Allocation of master pages to the pages of body containing paragraph tags

  Background:

  • I am not using structured FrameMaker v8.0
  • We currently have a paragraph tag called NotesPage and a reference page called Notes. The NotesPage paragraph tag specifies the Notes in the field below the FMP on the tab advanced in paragraph Designer. When you use the NotesPage paragraph tag, it inserts an entire page with lines at the bottom of the page.
  • There are cases in very large files, when to use the tag of paragraph NotesPage to insert this page in the document.
  • The page will always serve on a left page.
  • If we add information in the file, the page of notes can be pushed to a right-hand page. Therefore, this requires manual interventions in files that are quite large.

  Possible solution:

  • I'm working with the MasterPageMaps reference page.
  • I created an empty master page named NotesPage.
  • On the MasterPageMap, I did:

  Paragraph tag name	Right hand Master Page (or master Front Page)	Left Master Page	Indicator of rank (single, on the pages up to this amended)	Comments
  NotesPage	Right	NotesPage	Unique

  • What I want to do is the ability to insert a paragraph NotesPage tag after each section. If the NotesPage tag falls on a page of lefty, lined notes page. If the NotesPage tag falls on a right page, then my normal right named master page is used.
  • Unfortunately, this does not work for me. The paragraph tag always seems to prevail over the command apply Master Pages. I have the page of notes lined almost anything.
  • I tried to put the lines of notes, on the master page of NotesPage, but of course, it just seems like background text and my next page to a text value displayed on the lines.

  Any help is appreciated. This would save hours at the time of production.  Thank you!

  If the page layout that you want for the pages of Notes is on the master page named NotesPage, then you have probably set to the NotesPage paratag. There's just an empty paragraph of placeholder, - without having to access anything whatsoever from a page of reference...

• [LIKE CS3-4] Remove applied master, removes entirely the master of the doc?

  Here's what I'm trying to do: Add a page at the end of the document. Then, if there is a master page applied automatically, as 'A-master", delete if the page has"[none]"master applied.

  I tried several variations on the application "[None]" or "None" or nothing or null, which doesn't seem to work.

  I have also a script that I thought worked, but it actually COMPLETELY removes the captain propagated from the document as a whole. Clearly not what I wanted.

  Any suggestions on how to do it?

  Non-functional example script:

  say application «Adobe InDesign CS3»

  say document 1

  -page 1 to "A-master" applied

  say page 1 of delete master applied

  -"A-master" has now passed to document

  end say

  end say

  06/03/09 02:18, "Dave Saunders' [email protected]> wrote:

  > I don't know what is the AS syntax.

  nothing worth applied master page 1

  --

  Shane Stanley [email protected]>

  AppleScript Pro Sessions http://scriptingmatters.com/aspro>