Archiving of raw on DVD images

Similar Questions

• Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Disable GPU acceleration. Under preferences-> Performance, clear the check box

• DVD images are poor on the Widescreen TV

  After successfully burned a DVD of the premier 11, the photos and videos are not too crisp/clear as when you look directly at the camera using a HDMI cable to a 50 "flat screen TV.

  I suspect my Premier 11 parameters are not compatible or...?

  I read a lot of messages and links to the FAQ pages, etc, but I still have a problem.

  I hope someone can help me to straighten it the camera-live photos are sharp/clear/crisp, basically look GREAT.

  Camera: Sony DSC-HX - 30V

  Part of the video: AVC HD 28 M (PS)

  Frame: 16:9 (13M)

  Here's my process PSE/Pr11, settings, and related issues:

  1. all jpeg photos (Portrait AND landscape) have been simultaneously resized using process several files to 1000 pixels width and resolution = 300, before being imported in Pr11.

  -Do I need to do pictures Portrait and landscape regardless? (Or has been good on the TV)

  -Is the correct resolution?

  2. a new project was created with:

  -Project Settings: Fame size = 1920 x 1080

  DV-NTSC Standard 48 kHz

  -What are the correct settings for the output of my camera and my television viewing widescreen planned?

  -: Preferences/general default scale to frame box UNCHECKED

  -Preferences / Scratch disks: all THE paths have been recorded in 'Even as project' folder on an external hard drive.

  3. for troubleshooting, only 50 Photos and 1 video was put in active projects placed on the Timeline.  NOTHING else was done for simplicity in debugging this problem.

  4. opportunity to publish and share with the parameters:

  -DVD

  -NTSC_Dolby DVD

  Net result: Photos not net and videos has ripples on the edges of the objects as well not as sharp as camera-direct in motion.

  5. it boil down I need a BluRay DVD player to get the images comparable to the connection of the camera-direct?

  I'd appreciate help with each of the above items.

  DRM

  It's a small world!  I have the HX9V which is almost the same as your HX30V.  I use the same settings.  I have the same software Version 11.  I share the goal of showing on a 50 "flat screen.  I have also recently visited to Zion, but screwed up my shot by experimenting with 3D!  I have much better footage of the Grand Canyon and Canyonlands this year.

  What should I do for the new project to the point 2 above?

  You want projects 1920 x 1080 for input and output for your TV flat screen of 1920 x 1080.

  For my projects, make sure that I put at least a file video 1080 p 60 with photos.  My first item in the timeline will be this video for the project automatically sets for it.  I could do the new project screen and check the box 'force '.  The results are the same.  I can choose to delete the video file once the project is underway.  Last week I made a video for photos of women taken during a trip to Europe.  They were all still images.  I did a computer file to his computer.  Then I made a DVD and a Blu - Ray player for a friend who was on the trip.  DVD quality was disappointing.

  I'll watch this thread with care because I'm still confused about resizing.  I did where I did no resizing and now works on a big where I'm resizing photo and video mixed projects.  I see no difference in performance or image quality on my computer.  For me, the resizing makes no difference, and from what I read here, it is necessary.

  In my most recent effort, I resized huge from a different 1920 x 1080 Sony camera RAW files.  The files are smaller and I didn't see any difference in picture quality.  On some I wanted to use Pan & Zoom, so I added 50% for the two dimensions.  There is NO difference visible and functional at all.

  I have a Blu - Ray burner.  On a family history project, I made of Blu - Ray discs and DVDs as gifts for family members who were interested.  There is no doubt that there is a significant difference.  Even playing on my Blu - Ray players with room rezzing, the DVD did not measure upward for the Blu - Ray.

  There are two alternatives to achieve maximum quality on your TV, which have not yet been mentioned.  If you have completed the video is less than 20 minutes, you can burn a disc "AVCHD" in quality Blu - Ray on DVD at low prices with a normal DVD burner.  He will play on 'most' of Blu - Ray players.

  The other is to produce a computer MP4 file high quality of your video.  Copy it into a 'USB key' and plug it into your computer or your Blu - Ray player.  Most recent most accept and play, especially if you export to 30 p.  One of my Blu - Ray players will play the computer file when they are copied on a DVD in a data file.  (No, this isn't the same thing as 'burn a DVD movie.)

  If you want a few measures of workflow, I can be more detailed.  I can send you some samples via Vimeo or Dropbox if it helps.  Please post what you learn on resizing!

  Bill

• Equium A110 - DVD image and sound appear agitated & scratchy

  Hey guys, for the last two days when I insert a dvd/cd in my laptop and try to play it, the image and sound both seem choppy and rough. also when I try to copy and burn a dvd, it takes forever (2-3 h) whereas before it took barely 15 minutes.

  Is it possible to fix this?

  And another question, I want to try to restore the laptop to its 'factory settings '.

  Someone knows how to do?

  Cordially m1lz

  > Can I want to try to restore the laptop to its 'factory settings '. Someone knows how to do?
  If you want to define the notebook to factory settings, you will need to recover the operating system from the recovery CD Toshiba delivered! But beware, the recovery procedure erases the entire HARD disk. Create a backup before you start the installation from the recovery CD

  Now something about the issue of sound and video:
  Maybe that STRANGE is malfunctioning, it is not impossible but incredibly.
  Laptop you supports acoustic silencers request try to remove it.

  But after the installation of recovery everything should work fine... I hope ;)

• Burn VIDEO_TS or DMG to DVD image readable on DVD-Video players?

  I burned a movie to a DVD using toast. Now I want someone sends a file so that they can burn their own DVDs. I moved the DVD files on my desk. I burned them (a VIDEO_TS and AUDIO_TS folder inside) directly on a DVD, but it's unplayable. I used disk utility used to create an image ("read-only" Format of Image with 'none' encryption). I burned this .dmg directly on a DVD, but it's unplayable.

  Is it possible, or is it the other person must have something like Toast to burn their own video DVDs?

  Open the toast and click the video tab. In the drop-down list, choose the VIDEO_TS folder (you need not the audio file). Drag and drop the VIDEO_TS folder on your desktop in the left pane blank. Burn the disc.

• Review RAW and JPEG images in-camera

  Image + JPEG quality VINTAGES. How to examine each image after the fact? I have little time there. What has changed?

  Bobjennings wrote:

  ... Last week, I was able to 'Chimp' and see the Raw image then the Jpeg format. ...

  Are you talking about the self review process to see the photo as soon as you have taken, or are you talking about pressing the reading and using the wheel button to see the previous and next images?

  Bobjennings wrote:

  ... I chose the creative Style, both at different times, shoot the B & W B & W and expect to see the B & W in the examination of the image and then move and see the FIRST in color of the same image.

  When you select B & W, the JPEG image will be B & W, as well as the JPEG image of reduced resolution which is embedded in the RAW file. When you open the RAW file in your computer, you will be able to see the color, but the color will not appear when you use the camera playback function.

• How can I burn a DVD image files?

  I am trying to burn pictures of Media Center on a DVD. When I click on a folder to add, it does not copy the file, but all the individual photos in the folder.  I would have categorized folders on the DVD and but it is creating a list of 2000 photos.  I was able to burn a DVD with files by choosing Select all, but since I have too many files it copied only the first 12 I.  I use Media Center with Windows XP.

  Apparently is greater than the total size of the file of your photo collection
  the limits of your DVD. You can try to split the collection
  on several DVD.

  I'm guessing that you create a data for archiving purposes (backup) DVD?

  The following freeware might be worth a try...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP / Vista / 7)

  CDBurnerXP - create data disc
  http://CDBurnerXP.se/help/data/compiledata

• I have a licensed version of Win 7 64 professional, how to get your DVD Image

  I bought a new Dell PC and they ship no Windows Installation DVD where can I get a

  If you have recently purchased a Dell computer with Windows 7 operating system and have
  DataSafe Local 2.0 on your system, you can create a set of recovery disks that contain a complete copy of all the software installed on your Dell computer.

  Also how to request backup media:
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form

  Probably you have a "Recovery" partition on the hard drive,
  control owner / manual to find out how to retrieve the user.

  Alternatively, you can call Dell (have your serial # ready) and see if they will be able to send you a set of DVD media
  (there may be a small fee).

  Create a "System repair disc" recovery: click Start, and then type in the search box: System repair

  OR

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  J W Stuart: http://www.pagestart.com

• Where is change in Camera Raw to TIF images saved and how can it be undone?

  Being new Camera Raw I find there are advantages to use RTAs to make certain types of changes even to non-premieres images like hair that I have a lot of.  One of ACR adjustments I find particularly useful vs using the PS is to adjust the dark and light tones.

  I feel that ACR TIF file changes, for example, are "non-destructive" - that is, which means that I could always go back to the original at any time.  With changes to a raw image, I could do than to simply delete or even rename the sidecar XMP image. But it seems that the pods are not created for changes to a TIF image and so far I don't see how I could go back to the original TIF image / non-revised prior to the amendments of the cab.

  Just try to understand the possibility to use ACR for non-premieres images.  Grateful if someone could give advice or not ACR change my TIF images are in fact non-destructive, and if so, how could revert to the original image before changes in ACR?

  Thanks for your advice.

  Jerry Keenehan

  The changes are non-destructive, even to what is believed, stored as xmp data embedded in the tif (Similarly for jpg) file.  ACR does not have any warning that it is to overwrite the original file.  The pixel data are unchanged.  Of course, only programs Adobe will display the changes.

  Changes can be "erased" by right clicking on the thumbnail in Bridge, invoke develop settings and select clear settings.  The tif file remains forever altered in what a story is embedded in the file, but for all practical purposes, the changes are deleted.

  Richard Southworth

• Not enough disk space when creating ISO from DVD image

  I use first elements 14.1.  I encountered a very strange problem when you try to create an ISO image DVD, editing content in the available space (space required is 4.35 GB 5.12 Mbps throughput).  I get the message ' not enough space for the engraving', even if the drive I use has more than 1.5 TB of free space!  All files work in Premiere Elements are on this drive.  I cleaned all the relevant elements of the first, work folders before attempting to create the ISO image.

  Here's the weird part... If I try to create an ISO image of a Blu - Ray disc, editing of content space (space required is 18,87 GB to 20.19 Mbps bitrate), I don't get the error message.  I can create the ISO image of Blu - Ray with no problem!

  I tried to reboot several times.  I completely uninstalled EP 14.1, rebooted and reinstalled with the same results.

  Someone at - it ideas?  Has anyone ever encountered this?

  The running time is 1 hour 50 minutes.  I chose "Insert the contents of the available space", just as I did when creating the ISO from Blu - Ray.  PE shows that seeks to create a 4.35 GB file, which should easily fit on a 4.7 GB DVD.  I just tried open the same project on another computer and the same generation of PE, with the same result.

  I think I discovered a bug freak EP Version 14.1 (20151208.daily.895401).  The exact length of the film is 1:50:16:08.  I discovered that if I increase or decrease the duration of the video of just 1 frame, I is no longer the mistake and am able to successfully create a picture ISO of DVD!  Go figure.

  I would be interested to know if anyone else can duplicate this fault!

• Import into LR CC problem when recording RAW and JPEG image camera

  I have my unit set up to record the RAW and JPEG formats for each image, but when I import it imports only RAW files.  However, if I take just the RAW or JPEG only it is important as I shoot very well.  I can go to the card and recover JPG files and manually copy them to the directory and then go and import them into LR, but even then, when I'm in the folder they are in they do not appear, but when I go into the parent folder they show.  When the camera creates the FIRST and JPEG files, it gives them exactly the same name except for the extension which indicates if it's RAW format or the. JPG.   I have double and triple checked and the. JPG file is located in the same directory as the RAW file.  When I import the photos I have change the name for a custom name, so when I copy and past the. JPG files in the folder plus the suffix of the file, the file name is also different. How can I solve this problem?

  Hi BullRhino,

  Its setting, you need to activate in Lightroom.

  Open Lightroom > go to Lightroom preferences > general tab > check the option "Separate processing Jpeg in a file" > restart Lightroom.

  See the screenshot below

  

  Let us know if that helps.

  Kind regards

  Mohit

• problem with RAW in CS5 images

  I recently bought a new camera and when I downloaded my pictures from my camera to the bridge of my RAW images do not display as icons of the image. When I click on the image to open it in Camera Raw it is the error that I give myself, "could not complete your request because the file seems to be a model of camera that is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information. "I tried to update my software and this is the error code I have gave me here," Photoshop Camera Raw 6.7 update there is a download of this update error. " Quit and try again later. "I tried 3 times without success. Talked to customer for 15 minutes before they told me they couldn't help me with CS5. Any contributions to this issue would be greatly appreciated.

  The Canon 5 d Mark II requires that Camera Raw 5.2 or newer. Canon 6 d requires that Camera Raw 7.3 or newer. If you need at least Photoshop CS6 to have support for the new camera raw. Your other alternative would be to download and use the DNG Converter to create DNG copies that can be used with your current software.

• HELP - my CC apps keep crashing when opening any kind of RAW (cr2, dng) image.

  It seems to have something to do with GPU acceleration, but I tried a million things now and always, it crashes immediately. I followed all the suggested advice: https://helpx.adobe.com/photoshop/kb/acr-gpu-faq.htmland went as far as the decommissioning of W10 to W8.1 (64-bit).
  I updated my drivers updated ALL my CC apps and still... nothing...

  I desperately need a solution, because when I bought this PC a few months ago, I made sure that he has met all se system requirements and now I can not even open a single raw image?

  Any advice/help would be very appreciated!

  Thank you!

  Martijn

  System Specs:

  -Adobe Photoshop: 2015.0.1 20150722.r.168 2015/07 / 22:23:59:59 CL 1032107 x 64

  -OS: Windows 8.1 64bits

  -Version: 8.1 or higher: Intel CPU - familie:6, model: 15, Stepping: 2 with MMX, SSE integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2 HyperThreading

  -Physical processors: 6

  -Logical processors: 12

  -Intel i7-5820 3.30 GHz

  -Processor speed: 3299 MHz

  glgpu [0]. GLVersion = "3.0".

  glgpu [0]. GLMemoryMB = 2048

  glgpu [0]. GLName = "NVIDIA GeForce GTX 960.

  glgpu [0]. GLVendor = "NVIDIA Corporation".

  glgpu [0]. GLVendorID = 4318

  glgpu [0]. GLDriverVersion = "10.18.13.5597".

  glgpu [0]. GLRectTextureSize = 16384

  glgpu [0]. "GLRenderer ="GeForce GTX PCIe/960/SSE2"

  glgpu [0]. GLRendererID = 5121

  glgpu [0]. HasGLNPOTSupport = 1

  Could you please create a new account administrator test user and verify the application of this user account.

  Let me know if it helps.

  ~ UL

• Lightroom is able to accept and edit RAW Nikon D4s images?

  Professional photographer in a nearby town, said that heard Lightroom or had no difficulty working with the RAW of Nikon D4s images. I want to know if it true or not.

  Support the D4s appeared in Lr 5.4 and attach the support is available in Lr 5.7.

• Camera Raw opens the image in PS CS6 but I want to open it in PS CC

  When I click on 'Open the Image' in Camera Raw, it tries to open it in PS CS6 but I want to open it in PS CC I have installed after PS CS6.

  How can I set the default editor of Camera Raw?

  This does not explain it. I thought you did, but then again the bridge comes not with Photoshop, it's understandable.

  Here is the link if you have not already found.

  Media Manager | Download the free trial version Adobe Bridge CC

  Gene