DVD images are poor on the Widescreen TV

After successfully burned a DVD of the premier 11, the photos and videos are not too crisp/clear as when you look directly at the camera using a HDMI cable to a 50 "flat screen TV.

I suspect my Premier 11 parameters are not compatible or...?

I read a lot of messages and links to the FAQ pages, etc, but I still have a problem.

I hope someone can help me to straighten it the camera-live photos are sharp/clear/crisp, basically look GREAT.

Camera: Sony DSC-HX - 30V

Part of the video: AVC HD 28 M (PS)

Frame: 16:9 (13M)

Here's my process PSE/Pr11, settings, and related issues:

1. all jpeg photos (Portrait AND landscape) have been simultaneously resized using process several files to 1000 pixels width and resolution = 300, before being imported in Pr11.

-Do I need to do pictures Portrait and landscape regardless? (Or has been good on the TV)

-Is the correct resolution?

2. a new project was created with:

-Project Settings: Fame size = 1920 x 1080

DV-NTSC Standard 48 kHz

-What are the correct settings for the output of my camera and my television viewing widescreen planned?

-: Preferences/general default scale to frame box UNCHECKED

-Preferences / Scratch disks: all THE paths have been recorded in 'Even as project' folder on an external hard drive.

3. for troubleshooting, only 50 Photos and 1 video was put in active projects placed on the Timeline.  NOTHING else was done for simplicity in debugging this problem.

4. opportunity to publish and share with the parameters:

-DVD

-NTSC_Dolby DVD

Net result: Photos not net and videos has ripples on the edges of the objects as well not as sharp as camera-direct in motion.

5. it boil down I need a BluRay DVD player to get the images comparable to the connection of the camera-direct?

I'd appreciate help with each of the above items.

DRM

It's a small world!  I have the HX9V which is almost the same as your HX30V.  I use the same settings.  I have the same software Version 11.  I share the goal of showing on a 50 "flat screen.  I have also recently visited to Zion, but screwed up my shot by experimenting with 3D!  I have much better footage of the Grand Canyon and Canyonlands this year.

What should I do for the new project to the point 2 above?

You want projects 1920 x 1080 for input and output for your TV flat screen of 1920 x 1080.

For my projects, make sure that I put at least a file video 1080 p 60 with photos.  My first item in the timeline will be this video for the project automatically sets for it.  I could do the new project screen and check the box 'force '.  The results are the same.  I can choose to delete the video file once the project is underway.  Last week I made a video for photos of women taken during a trip to Europe.  They were all still images.  I did a computer file to his computer.  Then I made a DVD and a Blu - Ray player for a friend who was on the trip.  DVD quality was disappointing.

I'll watch this thread with care because I'm still confused about resizing.  I did where I did no resizing and now works on a big where I'm resizing photo and video mixed projects.  I see no difference in performance or image quality on my computer.  For me, the resizing makes no difference, and from what I read here, it is necessary.

In my most recent effort, I resized huge from a different 1920 x 1080 Sony camera RAW files.  The files are smaller and I didn't see any difference in picture quality.  On some I wanted to use Pan & Zoom, so I added 50% for the two dimensions.  There is NO difference visible and functional at all.

I have a Blu - Ray burner.  On a family history project, I made of Blu - Ray discs and DVDs as gifts for family members who were interested.  There is no doubt that there is a significant difference.  Even playing on my Blu - Ray players with room rezzing, the DVD did not measure upward for the Blu - Ray.

There are two alternatives to achieve maximum quality on your TV, which have not yet been mentioned.  If you have completed the video is less than 20 minutes, you can burn a disc "AVCHD" in quality Blu - Ray on DVD at low prices with a normal DVD burner.  He will play on 'most' of Blu - Ray players.

The other is to produce a computer MP4 file high quality of your video.  Copy it into a 'USB key' and plug it into your computer or your Blu - Ray player.  Most recent most accept and play, especially if you export to 30 p.  One of my Blu - Ray players will play the computer file when they are copied on a DVD in a data file.  (No, this isn't the same thing as 'burn a DVD movie.)

If you want a few measures of workflow, I can be more detailed.  I can send you some samples via Vimeo or Dropbox if it helps.  Please post what you learn on resizing!

Bill

Tags: Premiere

Similar Questions

  • Windows7 Desktop only shows black color whenever any substantive theme or Image are selected in the customization

    in my Windows7 Desktop only shows black color whenever any substantive theme or Image are selected in the customization. Plese geve me a solution

    Hi Odette.

    Thanks for posting your query on Microsoft Community forum.

    Question has started happening recently? If YES, did you of significant changes to the computer before this problem?

    The question could arise for various reasons, including corrupted cards, damaged TranscodedWallpaper.jpg file, Remove background images is selected in the Control Panel, etc. To diagnose and troubleshoot these causes of the problem, I suggest you try the steps outlined in the following link and check if the problem persists.

    Impossible to change the background image in Windows 7

    In addition, please refer to the steps provided by Shawn "Cmdr" Keene [MVP] replied on January 6, 2011 in the following thread link: "".

    I am unable to change the background of color United in my windows 7 ultimate

    Additional information:

    Why can't I change my desktop background?

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 in. image

    How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 image open at the same time to work on. I e I can't pass a layer on the image to the other.

    OK - I got out my trusty Photoshop Elements 10 - The Missing Manual and figured it out. What I was trying to describe, it was how to make images with 'tab' images 'floating '? This has somehow reset without my knowledge. What you need to do to get your images 'Floating' back is to click on "EDIT" in your editor - at the bottom of the drop-down list hover your cursor to "GÉNÉRAL" and click on - at the bottom of the drop-down list, click in the bottom left box 'ALLOW FLOATING DOCUMENTS IN FULL EDIT MODE' - and then click OK.

    That solved my problem!

  • How do I place what the images are RGB using the separations preview?

    2 questions: 1. how to spot what the images are RGB using the separations preview? 2. is there an easy way to convert those to CMYK without opening each to the PS? I've done it before all the time but I'm rusty and don't remember how I did it. I'm on CS6.

    One of the many methods to discover, you can:

    (1) you can use the links Panel.  Open the links Panel. Go to the menu of the Control Panel, and then choose Panel Options. In the dialog box Options Panel, under Show column check 'color space '. Now, when you view your links Panel it will show the color space of all related images.

    (2) you can use the preflight and set a preflight profile. In the profile, go to the section color > color spaces and unauthorized Modes and check RGB. Then all RGB images have reported.

    (3) If you need to know before you place the images, use Adobe Bridge. Open the folder where the image. Use the metadata Panel and view the color space of images.

  • App installs on Z10 when the icon & Splash Screen images are added to the handle Bar

    HI - don't know if it's an unusual question, but my app not install/load on my Z10 when one or both of the pictures icon and Splash Screen are added in the descriptor of Bar.  I development mode and have an installed debugging token and it is still valid.  The strange thing is that the application will be installed on the Simulator without problem.

    If I remove the splash screen images & icon in the Bar descriptor file, the application load on my Z10 with success.

    The images are the right size: 114 x 114 px for the icon and 768 x 1280 px for the SplashScreen.  The Momentics IDE accepts two files by activating beside them.  I also tried to add the images to the Q10 & PlayBook and still no luck with this loading on my device.  I even tried to go back to the image by default for the icon, and who does more either.

    The error I get when trying to install my application on my Z10 with icon images & Splash Screen is:

    Failure of deployment: Info: request shipment: install and launch
    Info: Action: install and launch
    News: Native debugging: on
    Info: File size: 414105
    Info: Installing com.example.ProfitCalc.testDev__ProfitCalc9866a36a...
    Info: Treatment 414105 bytes

    Someone has any ideas why this happens?

    Thank you.

    It is a known problem with certain versions of BlackBerry OS 10.1.  This article explains the problem and provide a workaround.

    Deployment of applications may crash or not after OTA 10.1 update.

  • BlackBerry Smartphones not all embedded images are displayed in the email

    Hello, I have faced this problem in my Blackberry 9900 where I can see only one image in the body of the email (embedded). The original e-mail that was sent to me has two JPEG images embedded, but in my email of BB, I see one. However, if I check the same e-mail in Outlook, I can see two images. I have activated following things: 1) Enable HTML email) 2 Download Images automatically as I tried to get pictures, but it won't help. Please advice that I use my BB for my business purpose, and this is the cause of the pain. Appreciate the help! Version information: BlackBerry brand & model: 9900 7.1 Bundle Network Mobile 1149 (5.1.0.276 platform v7.1.0.342): 1010 G next

    The first step in troubleshooting is almost always a hard reset. If you are unsure, remove the battery while the device is turned on. Wait at least 30 seconds. Place the battery back in and then check back the e-mail.

    If the hard reset solves the problem, then you have a job to do to try to find correlations of detective.

    What is happening on an e-mail account and not others?

    Is there something different about the images that don't charge against images that do?

    Can you reproduce the problem when sending messages with attachments picture of yourself?

    A few possibilities,... I wonder...

    The problem could be just some temporary problem with the software of the device that will be corrected with a hard reset. I have

    You use a legacy BlackBerry. Old software. BIS no doubt. Be prepared for the result that there is no solution.

    The issue could be a problem between BIS and the personal account. Maybe it is intermittent, maybe not.

    If the problem is specific to an account, the solution could be to use a different account.

  • I have a clone of the hard disk that my images are on for the trip.  How to run LR using that drive rather than what he became in general?

    I cloned the drive that my images are on a hard disk that is tougher to travel.  Think of this as an extra back upward.  How to run LR using that drive rather than what he became in general?  My plan is to return to the top/clone the drive trip to the typical reader when I go home.  The catalogue is available on a MacBook Air I'll use at any time.  It is not just enough space on the hard drive of MB Air for images.  I thought of naming the road trip with the same name as the player who is at home, and know that LR, but I think I'll get confused by doing this. The info on the two drives is the same at this point.

    Thank you.

    You use the update folder location command, as explained in part 2 of this document: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

    You can consider using Smart saw instead of wearing of the pictures with you on an external drive, if you have the space.

  • Muse will release in the catalyst for business is no longer if JPEG images are included in the file

    Hello

    I'm in trouble and hope someone has a solutuion to my weird problem.

    Since the last update of Muse, I can post on my site for paid business catalyst.

    The error message always comes to overall publish progress 61% complete and is:

    "Error loading file .jpeg '... ». There was no response from the server. Check your network connection and try again. If the problem persists, try again later. »

    My network connection works well.

    I reduced the problem of image files. If I remove all JPEG files in my file of Muse, she published without problem.

    Everyone knows about this problem?

    Thank you very much for your help!

    As mentioned, it is the bug is persistent. The Colombia-British team is entirely focused on this bug, but it is very difficult to completely solve. (Notes at the end about how you can help.)

    The error has nothing to do with the Muse.

    The error is very random. The most downloaded files as part of a publication, it is likely that you are to meet the dialog box "back."

    A very small number of persons (3) reported striking cases where clicking "resume" causes the dialog box "curriculum vitae" re - appear for the same exact file (and there are no special characters in the name of the file, which is a separate issue). To resume more hit once, if the dialog box is displayed, is sufficient for the publish operation ends.

    Workaround

    While it's very embarrassing, this error can be avoided by downloading on BC by using a client SFTP (for example Filezilla), rather than the integrated publishing feature. Once completed a large download via SFTP, operations publication for smaller sets of files will usually work without error (since the Muse will only publish the modified files).

    Use file > export as HTML... to export your site to a local folder. Then use Filezilla to download all the files and folders on BC.

    The credentials for SFTP to a site of busiinesscatalyst are:

    HostName: sftp://yoursite.businesscatalyst.com

    username: yoursite.businesscatalyst.com/youradobeid

    password: youradobeidpassword

    If your site uses forms, an additional step is required after the download via Filezilla. You need to make minor changes to every page that uses a form of Muse, and then publish to Muse. This will cause the Muse to publish and download only the pages with Forms. (If you don't do this step forms don't work, because the code generated when you do file > export as HTML... want to work only non - BC accommodation.)

    How you can help

    If you meet a case where the publication translates the dialog box "curriculum vitae" appearing on several occasions, we would like to work more closely with you.

    Join the beta program of Muse private http://museprerelease.com you can try the next major version, if you want, but this isn't why I need you to sign up for the beta program. I would like to join the beta program, so we can provide you with a special version of Muse 7 that will allow BC for additional information when an error occurs. I hope that this information will allow the team of British Colombia to the full isolate and fix this bug.

    Once you have joined the museprerelease.com forum, please post a thread message there explaining that you have met the Summary dialog box when the Muse 7 publishing and as soon as we have the special construction loan we'll let know you how/where to enter. Thank you.

    [I wrote this response is just right so he can appear at the top of this thread, no not because we consider this problem solved or workaround acceptable. - Zak]

  • The images are visible in the module development only.

    I can see my images only in the develop module and with the layering of cultures under tension. I don't know why. Probably accidentally changed a setting.

    I think that the most common problem like this has been resolved one of the two following ways: monitor profile has been altered, or the preferences have been corrupted.

    Considering that all your images are gray, I'd start with the monitor profile.  Set your profile to soemthing else and see what happens when you restart LR.

    See you soon!

  • JQuery fullscreen images are cropped at the bottom.

    When one image is displayed in the viewer full screen it's cropped at the bottom. I checked and changed all sorts of properties of the page without result.

    I hope someone can help.

    Ashley.

    Screen Shot 2014-01-18 at 12.05.47 am.png

    Hi Ashley

    I checked, please try these steps of the suggestion:

    (1) select the "Container" of the "Lightbox-slideshow".

    (2) open Panel "Spacing" then do left, right, top and bottom values to "0".

    Then preview the page, it should show the image full screen without any cut down part.

    Thank you

    Sanjit

  • Why my images are saved on the memory as .ctg card? How can I change the jpg?

    Although I have and you use for 50Ds, I also have a PowerShot SX 260 HS that I use for fishing; I can't open the images from this camera with any software I have, including the PS Elements 9 and 11. Help!

    You are looking for may be in the right folder:

    http://www.FileInfo.com/extension/CTG

    Look in the folder that says 100CANON or something similar.

  • The images are placed in the workspace, but nowhere else

    So I do a folder and I placed several images and got things just right, but when I look at my PAGES in the Panel on the right, there is no images on this subject. When I go to export to PDF, there are no images.

    I'm working from a model, I am disconnected just to get the correct size for the file, but I can see the images... I can manipulate them, they are there. But nowhere else.

    I use CS5.5 for Mac, and I need an answer as soon as I'm on a deadline!

    Thank you in advance people who are smarter than me!

    Kevin

    Don't mess with the operating system yet.

    The quick way to find out if a layer is not printable is to look at the name. If the type is italic it's unprintable. You can also select the layer, and then choose layer Options from the flyout panel.

  • videos and images are turning to the left upper corner of the screen

    can someone tell me how to solve the problem?   Videos and commercial images flashing in the upper left corner of my screen to the place where they are supposed to be.  But the controls for videos, play/pause, volume, etc. are in the empty box where the video is meant to be.

    Hello

    Check the following if you use IE9.

    Open windows control panel, open Internet Options and click the Advanced tab.  Under the graphic acceleration, make sure you there is not a tick against 'use made instead of GPU Rendering software.  If it is, uncheck the box and click on apply to save the change.  Restart IE.

    If the above doesn't help (or does not), download the latest installer of Flash Player and save it to your desktop.  Then, close all browsers, open windows control panel, open programs and features and uninstall Flash Player, if it is displayed here.  Once completed, restart the PC.  Now, double-click on the Setup program on your desktop to reinstall Flash Player.

    Another option is to download and install Firefox as a temporary measure, as the latest version of Adobe Flash seems to work OK with that - you may need to run the installer of Flash again after installing Firefox.

    Kind regards

    DP - K

  • PNG images are converted to the size of huge files

    Hello

    I used InDesign and Word to generate subtitle images that I put then in first CS6 in the form of PNG images with alpha channel. So I have 800 + PNGs in a folder in my project, and I'm carefully their calendar on my video track as a base image. As I'm trying to change my project, I get a message no. hard drive space left. I check my HD and I went to have 600GB of storage to 100MB. I discovered that most (not all) of my 20-30kb PNG images have somehow converted into 2-4 GB a piece when the first is open! I have recorded the images so that they are open first to Kbs, and immediately I look all slowly convert them to these huge file sizes. Please can someone explain what is happening? And how can I remedy this situation?

    I'm on a Mac OS X 10.10.5. Adobe CS6. The files are named "legends # .png ' if it makes a difference (so it's a bit like a sequence). My video is 45 minutes long with many discounts, graphics and audio samples at HD1080 containing approximately 8.5 GB media. The project file is around 53 MB.

    I tried to use for the parser in the metadata tab for legends, but I decided against it, because I don't like the style and the lack of control of the legends in the first. I don't know if that has anything to do with it, but I get a message when I want to quit smoking that first is save metadata. 20,000 x it might first save metadata in each of my PNG images that would make is it original size? Help, please!

    Thank you very much in advance for any help!

    Randall

    You can try to disable "ID XMP write to files during the import" Edition-Preferences-media menu

  • In preview, the images are projected on the wrong page

    Preview images of another slide show of pages are now appearing on my slideshow homepages, how can I stop this?

    Hi Jboss14,


    Sorry for delayed but answer you always face this problem? I tested on the latest version on Muse and can't replicate my end.. You can send the file to [email protected] if you need any additional investigation.

    Kind regards

Maybe you are looking for