ArcSoft Daemon has stopped working pops up at startup

Similar Questions

• "ArcSoft Daemon has stopped working" at startup.

  When I start my Vista computer, I get a different window that appears and says, "ArcSoft Daemon has stopped working".  It is a new problem on my computer.  There is no error code or other clues as to why this is happening.  When is it display ArcSoft Connect using "Services.msc", it says that it is running and that it is "automatic".

  Do I need ArcSoft Connect Dameon? How I have difficulty or delete?

  (I saw a similar, old question on somewhere else on the forum without any resolution for me).

  Thank you

  http://www.Google.com/search?q=ArcSoft+daemon+has+stopped+working&ie=UTF-8

• ArcSoft Daemon has stopped working

  For several weeks now I get an error message whenever I start my computer.

  "Arc Soft connect Daemon has stopped working".    'Microsoft is working on a solution and will inform you with a result' (this part is not the exact wording).
  Why this is happening and how can I get rid of this or repair.
  Thank you.

  Hello

  Published by Marilyn here

  "Click on the Start button. In the start search box, type Msconfig. Then click on the Startup tab.
  If you have any input to Arcsoft, then disable and see if that gets rid of the error at startup.
  If you have more than one program of Arcsoft, turn off one at a time to test them to see which comes the error. »

  Fail with it, try to boot minimum troubleshooting to find the offending program.
  929135 - how to solve a problem by performing a clean boot in Vista or Windows 7:
  http://support.Microsoft.com/default.aspx/KB/929135

  When you identify the troublesome program you can (1) search an update for the program that could solve the problem or (2) uninstall the program.

  Don

• Error: Arcsoft Connect Daemon has stopped working after the expiration of the trial of Arcsoft.

  Original title: get rid of a software box that says (Arcsoft Connect Daemon has stopped working). Keep on appearing__on from my laptop. ___

  My laptop, age 6 to 7 months running Windows 7, it came with Arcsoft requests to make greeting cards, albums Scrapbook etc.on a 6 month trial I have not tried.2 weeks ago, this box appeared - to the trial period is up and keeps popping up whenever I turned on my PC. I thought uninstall these software will solve the problem, but I was told 'the Installshield engine could not be started. Without this interface taken in charge. I then tried "recovery" back to a point of restoration 2 weeks ago. However, recovery was completed without success due to an error. I repeated the process with a week of 3 restore point but also failed. I think that MS calls this Appcrash.The next step would be to advanced recovery, but I'm not sufficiently confident to do it and the problem is only the latter.

  Hello
   
  ArcSoft is a suite of programs to support management. ArcSoft Connect is used to connect online (updates, new goodies etc.). It would be strange if you "Connect" without any of their products, then you want to uninstall those first, if they exist
   
  In order to eliminate that your computer allows you to try these methods.
   
  Method 1:
   
  If it is installed in C:\Program Files, you can uninstall using programs and features.
   
  Do follow the link provided below.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Method 2:
   
  Try disabling Services "ArcSoft Connect Daemon" service before you start.
   
  To do that you must follow these steps:
   
  1. click on the Start button.
  2. type services.msc in the search field.
  3. now, look for the "ArcSoft Connect Daemon" service and right-click on it and select Disable.
  Now, restart the computer and check if the problem is resolved.
   
  Method 3:
   
  If the method above doesn't resolve the problem, you can try to download the Windows install cleanup and install it on your computer and try to remove the arcsoft program and check the issue.
   
  For this you need to follow the links below.
   
  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301
   
  For cleaning and installation you can go to the link mentioned below:
   
  http://support.Microsoft.com/kb/923100
   
  Add this link to download the Windows install cleanup:
   
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Error "ArcSoft Connect Daemon has stopped working. A problem caused the blocking of the program works correctly. » »

  The original title - the following message mean?

  I get the following message from Microsoft Windows every time I turn on my computer: ArcSoft Connect Daemon has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.      'Close program' is in a box for me to enter.  What does that mean?  What I'll do.  I get this message for about a week now.

  Hello

  Read the solution proposed by Don Varnau at this link

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/ArcSoft-connect-daemon-error-message/c4a5511e-65f9-4B9C-9a43-d9f631c32b73

  Hello

  Quick and dirty solution...
  Start > run > (type) msconfig > Startup tab > uncheck the ArcSoft program > restart.

  Plan b... Watch the programs at http://www.arcsoft.com/en-us/index.asp

  Check Add or remove programs for any of these programs and uninstall the program or turn off
  automatic updates or to automatically connect or what similar feature you find.

  Hope this helps,
  Don
  

  __________________________________

  See you soon.

• ArcSoft Connect Daemon has stopped working properly

  I get this message about the Arcsoft Connect Daemon has stopped working properly.  What are the solutions to this problem?  Thank you.

  Go to: Control Panel, administrative tools, Services of control.

  Double click on Arcsoft Connect Daemon.

  Startup type: disabled

  Location status: stop

  Click on apply, OK

  If you do not use the uninstall program, it also stop him.

  If you use this program reinstall should fix the problem.

• ArcSoft Connect Daemon has stopped working

  At the start of my laptop, I always get the message "ArcSoft Connect Daemon has stopped working". -What this means or what should I do?

  Original title: "ArcSoft Connect Daemon".

  Hello

   
  Remember to make changes to the computer before this problem?

  Method 1:

  You can uninstall and reinstall the software or download the latest version of ArcSoft Connect from the following link and check:

   
  To uninstall a program
  Uninstall a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  Method 2: I suggest you to put the computer to own and install the program
   
  Step 1:
  Put the computer to boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

   
  Step 2:
  To install a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program
  Reference:
  
  http://www.arcsoft.com/public/download/arcconnect.asp

   
  
   
  You can also contact ArcSoft support.

  http://www.arcsoft.com/en-us/customer_service.asp

  I hope this helps.

• ArcSoft Connect has stopped working properly

  What should I do to fix my arcsoft promble

  'stopped working' or 'stopped working '?
  Was there an error message?
  What happened that pushed you to conclude that "it has stopped working properly?

  Check to see if it works at all the...
  Assuming you are using Vista:

  Start > in the search box, type services > press the Enter key > scroll to ArcSoft Connect..., click on it >
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on ArcSoft Connect... > properties >
  in Startup Type, click on the pointer to the right and change it to automatic
  to the service status, click Start
  Click OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• COM Surrogate has stopped working suddenly?

  I had my PC Windows 7 Home Premium 64 - bit since March, 2012.

  Tonight, October 17, 2014, I started getting an error "COM Surrogate has stopped working" pop up, all the time, for no apparent reason.

  I can not play with Windows Media Player AVI files without this message and ALSO a message that WMP has ALSO stopped working.

  I can't play AVI files in right click on the video and using 'Play with WMP Basic' without also getting this message as soon as I do a right click.

  I don't know if it's related, but since YESTERDAY I can't load YAHOO! in Internet Explorer. The page will simply not load, so I can't check my email official, formal and work-related.

  Chrome works very well, so I CAN access YAHOO! my general, leisure, pleasure and e-mails related to the game.

  I always allow upgrades of Windows, so I don't understand why it started to happen out of the blue.

  I have a current Antivirus with BitDefender Total Security and perform regular maintenance.

  Any suggestions on a fix for this?

  Thank you very much

  (Moved to programs)

  The first error points to the ffdshow.ax:

  Fault Module name: ffdshow.AX
  Fault Module version: 1.3.0.0
  Module Timestamp error: 53aedcb1

  The second error points to the avformat-lav - 55.dll:

  Fault Module name: avformat-lav - 55.dll
  Fault Module version: 55.43.100.0
  Module Timestamp error: 00029000

  The ffdshow.ax and avformat-lav - 55.dll can be components of a pack of codecs such as the K-Lite Codec Pack.

  Codec packs are / are installed?

  You can uninstall the codec packs and see if the error resolves?

• Adobe Photoshop CS5 has stopped working (Windows 7, 64-bit)

  I am trying to run Photoshop CS5 in 64-bit Windows 7. Everytime I open the program, I get an error saying "Adobe Photoshop CS5 has stopped working", immediately after the startup screen goes away and the main GUI opens. The only option on the error is "close the program".

  I'm on a computer with a processor i7 and 12 GB of memory. I have two Nvidia GTS 250 video cards, four monitors running.

  During the last day, I reformatted my computer and reinstalled Windows twice. I reinstalled the CS5 Master Suite several times that I can remember. I also downloaded and installed the latest drivers from Nvidia video card.

  I keep having the same problem whenever I try to open all of the programs in the suite CS5.

  The only time where as I got near the do function was immediately after installing new Nvidia drivers, before restarting my computer. I could open only once without it breaking, once I restarted my computer, Photoshop kept giving me the same error everytime I try to open it.

  I don't have any other software installed on my computer. This is a new installation of Windows 7.

  I was on the phone with Adobe technical support for about an hour and a half, and I still have to get one unique suggestion other than to try with my unplugged network cable installation. Other than that, they seem to be fond of the transfer me back and forth between departments (and asking me to repeat all my information every time).

  As you can probably, I am very frustrated at this point and would be very happy to suggestions.

  Thank you

  Trevor

  My scenario and history:

  Windows Vista Ultimate Edition and now Windows 7 Ultimate

  NVidia Quadro Fx 4500 screwing 4 monitors total SLi on or off - makes no difference.  Drivers are irrelevant.

  2 x Xeon 5160 (so total 4 cores)

  24 GB RAM

  PS CS 4 or 5

  4 monitors - Yep it's the thing 4 monitor.

  Fails every time that you describe.

  Comment - if you remote desktop on the computer - and so, indeed, use a single monitor - PS works fine.

  A WORKAROUND solution for 4 or 5 - I don't consider not that difficult because you lose some features, but it gets you 99% it and is the same workaround for CS4 or 5

  Go to: Files\Adobe\Adobe Photoshop CS5 (64 bit) \Plug-ins\Extensions\ (or CS4 - according to version)

  Look for the file:

  ScriptingSupport.8li

  Disable this extension by renaming the file with a tilde before the name of the file.  So:

  ~ScriptingSupport.8li

  Start Photoshop - it works and is essentially functional.

  The only real drawback I found is that disable this script extension means that you cannot use some of the scripts integrated under FILE - SCRIPTS - larger PIA for me to be that of the Contact Sheet Builder no longer works.  But as I now use Lightroom to create planks-contacts - this is not a big loss.  Other features script - I'm sure is applied - but not to the point I find PS unusable.

  ADOBE - if you read this - it was this extesión now for the last two editions of the PS.

• A pop up window telling me:-mobile device service has stopped working and was closed

  original title: mobiledeviceservice has stopped working and was closed

  A pop up window telling me: -.

  Microsoft Windows

  MobileDeviceService has stopped working and was closed

  A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  The only opposition is to close. After closing, it ceases to appear after a few seconds. So, how to solve this problem?

  Hi Nati,

  1. when exactly you receive this error message?

  2. What is the full error message you get?

  3. you remember changes to the computer before the show?

  You can try to perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

• -Pop-up message each time I log in that says: "ntvdm.exe has stopped working and it will be stopped."

  Greetings, West this pop up message annoyng which continues to appear a little each time, even if after I start my computer. It is said "ntvdm.exe has stopped working and he will be shut down", I close the window and aparently everything works OK. But it continues to if at all times, is there any problem? Why does this happen? Can it be fixed and how?

  My computer has an Intel Core Duo 2 CPU E6550 2.33 GHz, with 2 GB of RAM and my OS is windows vista business SP1 32-bit.

  Thanks for any help,

  Pedro Borba

  original title: ntvdm.exe stop working and will stop

  SALAM... I SAW UR QUESTION... HOWEVER, I KNEW THAT U HAVE PROBLEM WITH UR PROCESSOR FAN... PLEASE CLEAN IT WITH WIND TUNNEL YOU CAN FIND IN THE MARKET... AND BIOS PLEASE INCREASE THE TOLERANCE OF UR CPU TEMPERATURE... MY BEING of VALUE to 50 AND UR PROCESSOR IS HEATING BETWEEN 45 AND 55 degrees. TRY IT INSHALLAH IT WILL WORK... HOPE SOLVE UR PROBLEM...

  MOHAMMAD TOUSIF

• I was doing a pop-up error box that says: Winrscmde has stopped working and was closed.

  Original title: Winrscmde error message

  I was doing a pop-up error box that says: Winrscmde has stopped working and was closed.  A problem caused the application to stop working correctly windows will notify you if a solution is available.  How can I stop this, I don't know what is Winrscmde or what it does?

  Hello
   
  1. do you have this pop-up at starup?
  2 have you made any changes to the computer before the show?
  Winrscmde errors are usually due to the corruption of registry files.
  Method 1:
  
  Put the computer in a clean boot state, see if that helps.
  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135
  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  Method 2: Run the checker system (SFC) scan files and check if it helps.
  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833
  Method 3:
  
  I suggest you make a system full scan just to be sure.
  Here is a link that will give you information on how to perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest anti-malware
  definitions, download and run the Microsoft Safety Scanner again.
   
   
  , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I am trying to access my documents and I get a pop up saying "windows explore has stopped working".

  Original title: "windows Explorer does not work.

  I try to access my documents and I get a pop saying "Windows Explorer has stopped working", he spends next to her saying "windowse Explorer restarts" the box with all the options of my document is then stopped. I tried accessin while market and stop the internet, and it makes no difference.

  What should I do

  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When you try to open a folder I get a pop up Windows has stopped working

  When you try to access this folder and this folder, I get a pop up windows has stopped working. I ran a virus scan, memory diagnostics and now I am at a loss. If I didn't need some files, I would just delete the folder. All my other files and folders work fine and I have Vista. Please help :)

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: mc_dec_mp4v.dll
  Fault Module Version: 8.5.0.14265
  Timestamp of Module error: 4b81ceb4
  Exception code: c0000005
  Exception offset: 00012d2f
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Fault Module name: mc_dec_mp4v.dll

  Product name: Mainconcepta® Mpeg - 4 Video Decoder engine
  Description: Mpeg-4 Video Decoder engine

  This codec is try to preview the files in the folder. You can try unstalling the codec or him reassociate the file type (change the default program):

  1. open default programs by clicking the Start button, click default programs.

  2. under "Choose the programs that Windows uses by default", click "associate any type of file or Protocol with a program.

  3. under the parchment of column 'name' down and look for '.mp4 and .mp4v', select one at a time then click on the "Change Program" button at the top right of the box.

  4. in the "open with" box under "Recommended programs", choose another program or click on the Browse button below to select the program you want.

  5 Click to place a check mark in the box "always use the selected program to open this type of file".

  6. click on OK to exit.

  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default