ArcSoft Daemon has stopped working
For several weeks now I get an error message whenever I start my computer.
Hello
Published by Marilyn here
"Click on the Start button. In the start search box, type Msconfig. Then click on the Startup tab.
If you have any input to Arcsoft, then disable and see if that gets rid of the error at startup.
If you have more than one program of Arcsoft, turn off one at a time to test them to see which comes the error. »
Fail with it, try to boot minimum troubleshooting to find the offending program.
929135 - how to solve a problem by performing a clean boot in Vista or Windows 7:
http://support.Microsoft.com/default.aspx/KB/929135
When you identify the troublesome program you can (1) search an update for the program that could solve the problem or (2) uninstall the program.
Don
Tags: Windows
Similar Questions
-
"ArcSoft Daemon has stopped working" at startup.
When I start my Vista computer, I get a different window that appears and says, "ArcSoft Daemon has stopped working". It is a new problem on my computer. There is no error code or other clues as to why this is happening. When is it display ArcSoft Connect using "Services.msc", it says that it is running and that it is "automatic".
Do I need ArcSoft Connect Dameon? How I have difficulty or delete?
(I saw a similar, old question on somewhere else on the forum without any resolution for me).
Thank you
http://www.Google.com/search?q=ArcSoft+daemon+has+stopped+working&ie=UTF-8
-
ArcSoft Daemon has stopped working pops up at startup
Occurs whenever the computer is turned on this pop-up: "ArcSoft Daemon has stopped working".
A problem caused the program blocking
works correctly. Windows will close
the program and you warn if a solution
isn't available. »
This has happened more than a week. Please notify.
Some ArcSoft program runs at Windows startup and it is a failure. If you use the ArcSoft program, uninstall/reinstall. If you do not use the ArcSoft program, leave it uninstalled.
Manage startup:
Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually, it will be blocked by Windows Defender, and you need to allow it to run so that you can then check the box that says in effect, "don't mind to this subject again".
Important - do not use the System Configuration utility to stop the process. Use Services and stop all services, unless you really, really know what you're doing.
The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
How to perform a clean boot in Windows Vista or Windows 7 - http://support.microsoft.com/kb/929135
MS - MVP - Elephant Boy computers - don't panic!
-
The original title - the following message mean?
I get the following message from Microsoft Windows every time I turn on my computer: ArcSoft Connect Daemon has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. 'Close program' is in a box for me to enter. What does that mean? What I'll do. I get this message for about a week now.
Hello
Read the solution proposed by Don Varnau at this link
Hello
Quick and dirty solution...
Start > run > (type) msconfig > Startup tab > uncheck the ArcSoft program > restart.Plan b... Watch the programs at http://www.arcsoft.com/en-us/index.asp
Check Add or remove programs for any of these programs and uninstall the program or turn off
automatic updates or to automatically connect or what similar feature you find.Hope this helps,
Don__________________________________
See you soon.
-
ArcSoft Connect Daemon has stopped working properly
I get this message about the Arcsoft Connect Daemon has stopped working properly. What are the solutions to this problem? Thank you.
Go to: Control Panel, administrative tools, Services of control.
Double click on Arcsoft Connect Daemon.
Startup type: disabled
Location status: stop
Click on apply, OK
If you do not use the uninstall program, it also stop him.
If you use this program reinstall should fix the problem.
-
ArcSoft Connect Daemon has stopped working
At the start of my laptop, I always get the message "ArcSoft Connect Daemon has stopped working". -What this means or what should I do?
Original title: "ArcSoft Connect Daemon".
Hello
Remember to make changes to the computer before this problem?Method 1:You can uninstall and reinstall the software or download the latest version of ArcSoft Connect from the following link and check:
To uninstall a programMethod 2: I suggest you to put the computer to own and install the programStep 1:Put the computer to boot and search for the issue.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
Step 2:To install a programReference:I hope this helps.
-
Original title: get rid of a software box that says (Arcsoft Connect Daemon has stopped working). Keep on appearing__on from my laptop. ___
My laptop, age 6 to 7 months running Windows 7, it came with Arcsoft requests to make greeting cards, albums Scrapbook etc.on a 6 month trial I have not tried.2 weeks ago, this box appeared - to the trial period is up and keeps popping up whenever I turned on my PC. I thought uninstall these software will solve the problem, but I was told 'the Installshield engine could not be started. Without this interface taken in charge. I then tried "recovery" back to a point of restoration 2 weeks ago. However, recovery was completed without success due to an error. I repeated the process with a week of 3 restore point but also failed. I think that MS calls this Appcrash.The next step would be to advanced recovery, but I'm not sufficiently confident to do it and the problem is only the latter.
HelloArcSoft is a suite of programs to support management. ArcSoft Connect is used to connect online (updates, new goodies etc.). It would be strange if you "Connect" without any of their products, then you want to uninstall those first, if they existIn order to eliminate that your computer allows you to try these methods.Method 1:If it is installed in C:\Program Files, you can uninstall using programs and features.Do follow the link provided below.Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Method 2:Try disabling Services "ArcSoft Connect Daemon" service before you start.To do that you must follow these steps:1. click on the Start button.
2. type services.msc in the search field.
3. now, look for the "ArcSoft Connect Daemon" service and right-click on it and select Disable.Now, restart the computer and check if the problem is resolved.Method 3:If the method above doesn't resolve the problem, you can try to download the Windows install cleanup and install it on your computer and try to remove the arcsoft program and check the issue.For this you need to follow the links below.Description of the Windows Installer CleanUp utility
http://support.Microsoft.com/kb/290301
For cleaning and installation you can go to the link mentioned below:
http://support.Microsoft.com/kb/923100
Add this link to download the Windows install cleanup:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exeThank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
ArcSoft Connect has stopped working properly
What should I do to fix my arcsoft promble
'stopped working' or 'stopped working '?
Was there an error message?
What happened that pushed you to conclude that "it has stopped working properly?Check to see if it works at all the...
Assuming you are using Vista:Start > in the search box, type services > press the Enter key > scroll to ArcSoft Connect..., click on it >
topic status, it must be said... Has begun
under Startup Type, it must be said... Automatic
If it does not say that, right click on ArcSoft Connect... > properties >
in Startup Type, click on the pointer to the right and change it to automatic
to the service status, click Start
Click OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
ArcSoft connect notification has stopped working
I have problems with what follows when the fault Jetcar pc and after a while, I have to start up again.
ArcSoft connect notification has stopped working
and
the folder of system of procedure entry point arccon-live announcement could not be located.
can anyone helphttp://www.arcsoft.com/Forum/forum_posts.asp?tid=1445
Read the above info.
http://www.arcsoft.com/forum/default.asp
Ask in the Forums of the 3rd party manufacturer at the link above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you don't know anything about it, you can try out of boot entries:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Read the info at the link above.
See you soon.
See you soon. Mick Murphy - Microsoft partner
-
Problem with windows Explorer, getting the error Windows Explorer has stopped working.
I have a problem with windows Explorer (windows 7 OS) - the causes of each click on the right button of the mouse on the desktop icons to convey a message "Windows Explorer has stopped working. Windows Explorer restarts. How to solve this problem?
Thank you
Miodrag
Thank you very, very much... I solved my problem by uninstalling the software "daemon tools".
I have only Microsoft Security Essentials antivirus, is it necessarily to install another antivirus software? -
HP DVDRAM GT80N has stopped working
New HP laptop. HP DVDRAM GT80N has stopped working, have now error Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Controls have found the driver installed, suggestion to roll back does not work because the option is not available. Please help solve this disorder.
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
{Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %xTry to delete the value of the AFC.
To delete the value from the AFC entry double-click LowerFilters and under value data, delete AFC > OK
Create a system restore point beforehand and restart the computer after.
The value of the AFC would represent the afc.sys driver which can indicate the software Arcsoft has been uninstalled and the value of the AFC has been left behind the creation of the question.
-
My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.
What version of OS X (or, if all goes well, Mac OS) are you running?
What version of iPhoto do you run?
iPhoto was not maintained or updated updated by Apple for about eighteen months. Photos taken app supported since that time.
-
Click force has stopped working
Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.
I have checked all the options, rebooted the system, still no clear sign of what is the problem.
Does anyone have the same problem? How to check weather force/pad touch works well?
Any suggestions what to do?
A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.
After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.
Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.
Possible only "close program"...
Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!
All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).
Checked the event viewer:
1. error message:
Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f
Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f
Exception code: 0xc0000005
Offset: 0x004f0e09
ID of the process failing: 0xcc4
Start time of application vulnerabilities: 0x01d218b3194e2f01
The failing application path: C:\Program Files\iTunes\iTunes.exe
Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll
Report ID: 68f80588-84a6-11e6-8df8-4851b741621f
2. Windows Error Reporting
Fault of type 1024926102, bucket 25
Event name: APPCRASH
Answer: No available
Cabin ID: 0
Signature of the problem:
P1: iTunes.exe
P2: 12.5.1.21
P3: 57cfb09f
P4: WebKit.dll
P5: 7602.1050.4.5
P6: 57c11f7f
P7: c0000005
P8: 004f0e09
P9:
P10:
Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support
-
iMovie has stopped working since iOS 10
iMovie has stopped working since iOS 10
Now, all I see is a black screen and then it throws me out of the app however does not close the app and the problem does not improve. I lost my summer and extra time making a super great way to 5 hours difficulty megaforce and now I can't watch it
Hello iMovie does not work,
After reviewing your post, it looks like the iMovie app is black and take you to the home on its own screen.
I recommend you read these articles, there are a few things that we can try to get the application running again.Force an application to close on your iPhone, iPad or iPod touch - Apple Support
Restart your iPhone, iPad or iPod touch - Apple SupportThank you for using communities of Apple Support. Good day.
Maybe you are looking for
-
How can I enable the use of the LinkedIn work initiated for Firefox toolbar?
I heard through a section of LinkedIn that job seekers can use this tool to the browser through Firefox for free, but I can't figure out how or where to locate and add it.
-
Tecra A6 does not start with battery only
Hi allI'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the po
-
The display of the external hard drive content
Hello I have a Maxtor external hard drive and I want to view the content on this laptop (Dell Inspiron 1545), how do I access files? Any idea of it please. John
-
I have a d4260 Pavilion Office I am running xp and you want to istall 8 victory is possible?
-
Can not hear sounds but the speakers work fine...?
Help! My computer will not play music through my speakers. The small speaker on the bottom of the screen is 'x' ed out and when I click it, it says the "audio device is disabled ', I plugged the speakers to another computer to make sure that they wor