are not made

Similar Questions

• my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  Hi Kdooley,

  Are a. When you facing this problem?

  B. using a laptop or a desktop computer?

  C. is - what happens with specific applications?

  D. don't you plug a different keyboard to check?

  Method 1

  I suggest you to connect this keyboard on another computer and see if it even. If the problem persists, try Method 2

  Method 2

  Try to change the rate of repeat on the keyboard and check if it helps.

  1. Open keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.
  2. Under character repeat, move the repeat rate slider to the left to keyboard characters repeat more slowly, or to the right to make them repeat faster.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

  If the problem persists, then it might be a problem with the keyboard itself.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Replacements of the passes of the constraint are not made.

  Hello

  I adjusted the following piece of code pl/sql - in order to show what's wrong. The complete pack is great - it has some errors, I try to debug and modify.

  It's so (as anonymous block) :

  declare

  TYPE columns_rec IS RECORD (c_name VARCHAR2 (32),)

  c_type VARCHAR2 (32),

  c_length number (4,0).

  c_scale number (4,0).

  c_null varchar (20));

  TYPE cols_t IS TABLE OF THE columns_rec;

  p_Pkcols cols_t;

  p_nonPkcols cols_t;

  l_allCols cols_t: = cols_t();

  l_str varchar2 (4000);

  p_prefix varchar2 (50): = 'FA_SITES_NEW.';

  CURSOR c_pk is

  SELECT c.column_name, data_type,

  Decode (data_precision,

  NULL, data_length,

  TO_NUMBER(data_precision-data_scale)) data_length,.

  data_scale,

  Nullable

  Of user_tab_columns c,.

  user_constraints uc,

  user_cons_columns cc

  WHERE uc.owner = USER

  AND uc.constraint_name = cc.constraint_name

  AND c.table_name = cc.table_name

  AND c.column_name = cc.column_name

  AND uc.table_name = cc.table_name

  AND uc.table_name = 'FA_SITES_NEW. '

  AND constraint_type = 'P '.

  ORDER BY cc.position;

  ---------------

  CURSOR c_non_pk is

  SELECT column_name, data_type,

  Decode (data_precision,

  NULL, data_length,

  TO_NUMBER(data_precision-data_scale)) data_length,.

  data_scale,

  Nullable

  C USER_TAB_COLUMNS

  WHERE table_name = 'FA_SITES_NEW '.

  AND NOT EXISTS)

  SELECT 1 FROM user_constraints uc, user_cons_columns cc

  WHERE uc.owner = cc.owner

  AND uc.table_name = c.table_name

  AND cc.column_name = c.column_name

  AND uc.constraint_name = cc.constraint_name

  AND uc.table_name = cc.table_name

  AND constraint_type = 'P')

  order by nullable;

  -------------

  CURSOR c_cons is

  SELECT cc.column_name, c.constraint_name, c.search_condition,

  Decode (c.constraint_type, 'P', 'Pk', 'U', 'Uk', 'R', 'Fk', 'Check') c_type

  From user_constraints c,.

  user_cons_columns cc

  WHERE c.owner = USER

  AND c.constraint_name = cc.constraint_name

  AND c.table_name = cc.table_name

  AND c.owner = cc.owner

  AND c.table_name = 'FA_SITES_NEW. '

  AND constraint_type in ('P', 'R', 'C', 'U')

  ORDER BY decode (c.constraint_type, 'P', 1, 'U', 2, 3);

  Start

  Open c_pk;

  collect the fetch c_pk in bulk in p_Pkcols;

  close c_pk;

  Open c_non_pk;

  collect the fetch c_non_pk in bulk in p_nonPkcols;

  close c_non_pk;

  l_allCols: = p_PkCols p_nonPkcols union multiset;

  FOR cfl_cons in c_cons

  LOOP

  IF upper (cfl_cons.c_type) = 'VERIFICATION' THEN

  l_str: = cfl_cons.search_condition;

  because me l_allCols.first... loop of l_allCols.Last

  l_str: = replace (l_str, l_allCols (i) .c_name, p_prefix | l_allCols (i) .c_name);

  dbms_output.put_line (l_str);

  end loop;

  END IF;

  END LOOP;

  end;

  The script that creates the table is:

  CREATE TABLE FA_SITES_NEW

  (

  AA              NUMBER(5)                     ,

  CODE_CC VARCHAR2 (12-BYTE),

  DESCR_CC VARCHAR2 (60 BYTE),

  CODE_EGK VARCHAR2 (5 BYTE),

  VARCHAR2 (80 BYTE) EGK,

  CODE_THESIS VARCHAR2 (5 BYTE),

  ADDRESS VARCHAR2 (100 BYTE),

  TK VARCHAR2 (8 BYTE),

  DATE OF VALIDDATE_FROM,

  DATE OF VALIDDATE_TO,

  VARCHAR2 (200 BYTE) NOTES,

  LASTINSU VARCHAR2 (20 BYTE),

  DATE OF LASTINSD,

  LASTUPDU VARCHAR2 (20 BYTE),

  DATE OF LASTUPDD,

  CODE_CC_VC VARCHAR2 (15 BYTE) GENERATED ALWAYS AS ("000" |) ("' CODE_CC")

  )

  ;

  ALTER TABLE FA_SITES_NEW ADD)

  CONSTRAINT FA_SITES_NEW_CHK

  CHECK (validdate_from < = validdate_to));

  Now the problem is - except that the constraint appears several times(let's leave it for now) - replacement is not done.

  In other words, the constraint is "validdate_from < = validdate_to ' and I want to be replaced as FA_SITES_NEW.validdate_from < = FA_SITES_NEW.validdate_to (that's why I use l_str: = replace (l_str, l_allCols (i) .c_name, p_prefix | l_allCols (i) .c_name);).

  Instead, the chain remains validdate_from < = validdate_to.

  I also tried to do the replacement in a sql stmt ' select replace (l_str, l_allCols (i) .c_name, p_prefix |)» "l_allCols (i) .c_name) in double l_str", but to no avail.

  Is it possible this minor change to the result?

  NOTE: I use oraDb 11.2.

  Thank you very much

  SIM

  I don't understand. Why do you want to include the name of table to the columns that are used inside the check constraint? This will make the invalid constraint if you rename the table. It seems much better to have the name of the column without a name to additional table.

  The problem could be that the expression within the constraint uses lowercase column names, while your system column names select uppercase letters in the data dictionary. This is why replacing is not picking up the names.

• Why my text layers are not made? Text makes RAM Preview

  I have a 2D moderately complex composition in 2014 EI, using several Adobe Illustrator files and nested compositions that make it very well.

  I can also preview the composition perfectly RAM Preview (about 25 seconds of it anyway).

  The problem starts when I try to add the composition to the render queue. Everything except text layers make it very well, but the type is absent (these are native text AE layers, not any type).

  I have had no success, the research of the Creative Cow and Adobe user groups. All layers are visible with the 'eyes' on, and I do not use the 3D settings.

  Render settings are best settings, Lossless, but I played with different parameters and get the same results.

  I'm on an old MacBook Pro running OS 10.7.5

  Please help, thanks.

  Model name: MacBook Pro

  Model ID: MacBookPro5, 2

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 6 MB

  Memory: 8 GB

  Bus speed: 1.07 GHz

  Your text layers are defined as a Guide layers?

• In Windows Vista Home Basic automatic updates, anti virus updates and scans, etc. are not made during the night while the computer is in sleep.

  Using Microsoft® Windows Vista Home Basic Version 6.0.6001 Service Pack 1 Build 6001, I have my computer set up to install updates automatic update and scan with my AVG antivirus 8.5 from one day to the next, while the computer is in sleep. In the morning, when I wake up the computer it alerts me that there are updates available, and I have to click the balloon to install the updates. Meanwhile my anti virus is update solange wake up also. Both are supposed to occur automatically during the night. Shouldn't these scheduled etc. updates works even if the computer is asleep?

  Hi daglo1963,

  Thanks for posting on the Forum of responses of Vista.

  When Vista is in "standby", like updating the activity is suspended.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 3D with the color effect are not made. Help, please.

  Hello

  I went to a 3D effect with a layer of setting with striped lines. I have the transfer on these lines mode of "classic color burn" because that's the look I want. However when I visited the outside effect, the lines are almost invisible in the final rendering. Also, I have a few lights in the scene and uses 3D with a 3D object elements. The lights could be causing a problem? I will attach a photo of the scene before and after rendering. Thanks in advance for any help!

  John Grosjean

  
  Here are the pictures. In the second set the rings disappear almost completely.

  

  

  I thought about her to everyone who can run in this issue. Make sure that you disable "accept the lights" and "accepts shadows" in any layer 3D, you won't be affected by the lights in your scene.

• Chain stabilizer not made export

  I have come to export a sequence and for some reason, some of the effects of stabilization of string are not made and the clip has an orange bar saying 'Stabilization' through the middle. Very strange!

  Anyone have any ideas why he did? The sequence is over an hour long and was about to be sent to a client is a good thing I happened to fall on one of them.

  You must wait until everything is Warped (no blue or orange band on the item in the timeline) and then click Export.

• Changes made to the screw driver in the Interface of Simulation Toolkit (SIT) are not translated

  Hello

  I use Simulation Interface Toolkit to target a controller built in Simulink on a PXI target. I used the SIT connection manager to generate the driver screws I had to make some changes in the screw driver specifically Read.vi IO. I made the changes and the entire application runs without error. But the changes are not getting in the functioning of the application, essentially when I load the thing on PXI and run it, it contains exactly as it was before behaiving I made these changes. Some how the changes I make to the Read.vi of e/s are not begin day somewhere in the top vi driver.

  Could someone help me with this please.

  Eliane.

  Hi Bill,

  Thank you very much for looking into this. Solved the problem.

  The problem was that whenever it makes a change one driver that saw VI top-level driver must be opened and saved again. This opening and registration links the pilot with new changed correctly VI and then everything works fine.

  Thanks again.

  Eliane.

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automatic backups made in libraries that are not yet open?

  I'm familiar enough with FCPro X (using the latest version 10.2.3) but I saw something for this, I don't really want.

  I hope I'm wrong!  That's why I write here

  When we are editing in a library, FCPro is automatic backup library every 10 or 15 minutes or more. (Don't know how many times, but not important here.)

  It's a good idea that Apple did this.  Always nice to have automatically saved versions.

  But what I found, is if we said, 10 different projects, we are working on--which means 10 different libraries on our hard drive FCPro creates these libraries for backup automatically on all 10 libraries!  Even if we have not opened a library for 6 months, it still gets automatic backups!

  Sometimes the backup of the library can be 30meg, or so, if we are changing for 3 hours - find us in each of the 10 libraries there are several automatic backups created - even you of course, nothing has changed in the library!  Maybe 8 of the 10 have not yet opened and yet in the "Final Cut Backups" folder, there will be a few hundred meg of backups automatically: of course it must, because backups are in libraries, we haven't yet opened!

  I know not how to disable this feature - so FCPro stops auto - and we can do separately in each library - but that's a lot of extra work, remembering that libraries are "automatically backup" and which are not.

  I guess I want to come is that we would like FCPro continue to automatically back up the libraries that we change in French - but I'm correct that it also backs up the libraries that we don't even open using hundreds of megs of useless data.

  All I want is the feature of works as is, but only when opening a library - NOT in others who have not been affected.

  I am writing to be sure I understand it.  This doesn't seem to be the case?  Is there a way to tell FCPro (not for each library separately) only to make automatic backups in I work in libraries?

  Thank you for reading this... what I hope I am WRONG!  And there is a workaround or something?  It's just a nuisance to have to remember to turn on all the automatic backups on 'OFF' of each library - but then activate it when you work on 1 or 2 - and then turn them off again.

  Any thoughts?

  Thank you

  Larry

  Larry Cohen wrote:

  If we say, 10 different projects, we are working on--which means 10 different libraries on our hard drive FCPro creates these libraries for backup automatically on all 10 libraries!  Even if we have not opened a library for 6 months, it still gets automatic backups!

  Sometimes the backup of the library can be 30meg, or so, if we are changing for 3 hours - find us in each of the 10 libraries there are several automatic backups created - even you of course, nothing has changed in the library!

  All 10 libraries appear in the library list? If they are, why not close those that you don't need for this session?

  That said, I never had what you describe. Where these libraries are stored? Is the drive (or drives) in the OS X Extended (journaled) format?

  Russ

• Changes made in Lightroom are not displayed in Bridge.

  When I change my jpeg or psd files in Lightroom 4.3, these changes are not displayed in Bridge.

  I ' v checked the corresponding box in the catalog settings Lightroom "Auotmatically writing changes to XMP.

  What I'm doing wrong?

  Digitalmac.
  

  With box checked, it may take some time until what the Lr 'bypasses' to write changes to xmp.

  To verify this directly: immediately after you make changes to an image (PSD or other), press Ctrl / Cmd + S (letter S you keyboard), wait for the progress bar to complete and then check in your image in Bridge.

• My app store and some other applications not re-downloadable are a question mark and are not in my file programs, Please HELP IVE TRIED EVERYTHING! GarageBand does not open, there was a question mark through the icon, restart comp, all the question marks

  I opened my garageband, but I does not, because there was a question mark hollow garageband icon, then I restarted the computer, it normally restarted (whithout saying I restarted the computer because of a problem), and when it was made of built-in apps were question marks, were not in the program and "it is not found on the computer.

  Please help even the app store is broken and he asked me if I would choose a program from the app store when I tried to re - download from the internet, said yes and it did not work. Help, please

  The? means that the location for the file specified in the Dock cannot be found.

  You said "were not in the programs.

  Did you mean that they are not located in the Applications folder? Windows has a record of programs, not OSX.

  You said "when I tried to re - download from the internet, said yes and it did not work."?

  What happened when you tried?

  The missing applications are in the purchase of the Mac App Store section?

• Background images are not displayed (CSS, other images ok

  I tried to empty cache, watched: config for odd configurations, made a private window and disabled all extensions. None of them had no effect.

  Test pages: Amazon.com and https://developer.mozilla.org/samples/cssref/background-image.html - two of these pages have loaded by CSS background pictures. For example, the Amazon logo at the top left is a background loaded from a CSS page. The image itself can be found in gross:
  http://g-ECX.images-Amazon.com/images/G/01/gno/sprites/global-sprite-v1._V339353059_.PNG

  This image cannot:
  https://developer.Mozilla.org/samples/cssref/images/starsolid.gif

  But why, why why these images are displayed on their relevant Web pages? I see that Amazon, eBay, and many other sites Web without a range full of images. In particular those used for menus and other important navigation buttons.

  Here's what I see on the Mozilla page mentioned above: I see the text, but no expandable star image. It works in other browsers and on other computers in Firefox.

  The page that I tap on right now has no blue background, windows are not correct (as the search engine is not a rounded grey area) and the magnifying of research is missing. So this experience makes it impossible the use of simple pages.

  Firefox 32, Vista

  It was a strange setting. I have it set, then updated some of the relevant information on the subject myself. Here's the question:

  If the preference of the user browser.display.use_document_colors in subject: config is set to false, the background images will not display.

• If the Photos are not Visible after their exportation from Photos for Mac

  Export of Photos may write JPGs invisible on the disc, if the photos are exported with the option ' file name: use the title.

  If the first affected user a title to the picture, the deleted the title text, photography will have an empty title and the exported photos will be simply named ".jpg" and treated as invisible system files.  This bug can fill the disk with lots of image files, which are not visible in the Finder, unless the hidden files are made visible.

  User bikedaveca reported this bug today:

  See discussion: exported photos do not appear in the Finder

  More in this tip of the user:

  Bug: export of Images with "file name: U title" exports the files as Invisible, if the title has been deleted

  As a precaution, keep at least one printable character in the title field, when when you remove a title from a photo, so you can see, she had a given title.

  As a test, import three new pictures, for example:

  

  The first has a title, the other had a title, but removed, the third one never had a title and watch "Untitled."

  When I select and export them with ' file name: use Title ", only two photos will be displayed in the Finder.

  The problem is, that deleting a title does not remove the title, but adds an empty title. If the photos are exported with the filename ".jpg".

  

• Some songs are not uploaded to the iPhone, even if they are in my ipad

  Hello!

  Some songs downloaded on my iPhone are grayed out and cannot be read, even if they are perfectly fine in my iPad.

  Do you have an explanation for that?

  Thank you!

  He suggested that the files have not been correctly transferred to the device.

  The following steps should resolve things assuming that all of the content you want in your library.

  (If it is not see recover your iTunes from your iPod or an iOS device).

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  NB. A feature introduced with iOS 9 called thinning or slicing app app allows each device to download just the code and resources required by this device, resulting in smaller downloads and a better use of the storage on the device. Therefore the device is no longer the universal version of the application that can be installed on any device to transfer applications is no longer supported. You can however download past purchases to iTunes and/or to activate Automatic app downloads buy to make sure iTunes has always the apps you want on your device. Another change to the way the restorations are implemented means that all private data app is restored and apps that are not in the library are waiting for download on the iTunes Store on Wi - Fi, in a similar way to the restoration of the iCloud way works. Not having apps in your library is not the disadvantage that it once was, but you're still at risk of losing a favored app if it is removed from the Bank and you don't have a local copy.

  TT2