Are there 2 seconds audio delay with Apple TV as with Airport express

Similar Questions

• Are there problems using Adobe CC with 10 Windows?

  Are there problems using Adobe CC with 10 Windows?

  Hi Michael,

  This might be useful: https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  Kind regards

  Sheena

• CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 does support OpenCL and OpenGL?

  Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

  Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

• airplay iOS 10 with airport express

  Impossible to find airplay with Airport Express, but works well with apple tv

  some1 help me

  Same problem with my iPhone 5 and IPad Mini after upgrading to IOS 10.

  Firmware Express Airport: 7.6.7

• Audio delay with the dolby surround

  I use the new Apple TV, 64 GB version.  When the audio is set to Auto or Dolby Surround, there is a delay of about 3 seconds when starting any video streaming.  This occurs at startup or when coming out of the break.  This does not happen if I change the stereo audio.  The Apple TV is connected to the TV via HDMI, the TV to a Soundbar Sonos via optical (Sharp Aquos).  I don't have this problem with other equipment Dolby Digital (Xbox).  Anyone else having this problem or figured out how to solve?

  My apologies, in case it wasn't clear the delay is on the audio from.  The video itself starts just fine

• Are there drivers Vista Audio for my Lenovo X 41?

  I can't find a driver for Windows Vista 32 bit Multimedia Audio Driver and the driver for the portrait buttons and landscape on the side frame of the screen. I don't have the controller driver to the LPC Interface Controller under Windows Vista 32-bit. Are there drivers available for this part of the IBM Lenovo Think Pad X 41 Tablet?

  Welcome to the forum!

  I'm not familiar with Vista, but I suppose that similar to Win7 you can use the XP drivers and install them in compatibility mode:

  Audio driver

  For the rest of the drivers I want to download, install and run Lenovo's System Update and see what it finds:

  3.16 system update

• Mini TiVo with airport express

  My question is about the tivo, the Airport express and the extreme of the AC.  have the romaio standard tivo in my room and the mini in the other room about 25 feet, with thick walls about 7 feet.  the mini is to cut the audio and the video of course.  If the research online, wanting to know the best solution.  If the connections are such:

  1st room:

  Extremes of AP connected to the modem

  romaio connected by ethernet to AP extreme

  2nd room:

  AP express connected by ethernet to tivo mini

  Deck AP express under the name "extended" to the extreme

  bridge over the 2.4 ghz network

  so the question is whether to 'extend' or 'join' the network?

  or the other bridge then on the 2.4 ghz or 5 GHz?

  all the details, let me know

  There is no significant difference.

  so the question is whether to 'extend' or 'join' the network?

  or the other bridge then on the 2.4 ghz or 5 GHz?

  The question is fair level of signal and bandwidth.

  It is difficult to get the numbers now, as the utility v6 airport is no longer a toy only utility is to say a tool. As the use of a hammer plastic actually hammer in nails.

  Try to get the speed of connection... in v6, you roll your pointer over the connection. As thus.

  I have two gen5 connected AE as extend wireless... It did not work with long connection so I moved to the extreme a few feet from the other device. They are now about 4' apart.

  The connection now shows 195 MB/s, but you need to playback during the actual file transfer. It will go down considerably the work.

  

  If you can get a machine more old computer or windows and install the utility 5.6 you will get much more information.

  

  Links are not the same from one end to... Although here, it works fine. As I had before that connection showed ok one end but much poorer on the other... This info is now impossible to obtain in utility v6.

  25 ft away, with thick walls about 7 feet.

  I'm sure that the walls are 7 thick inches rather than 7feet.

  But everything depends on the construction and the number of walls.

  Light framing lumber and Sheetrock (rockboard?) have fairly low resistance wireless.

  Brick or concrete walls have a lot of resistance wireless... you must use ethernet or adapters EOP.

• Wireless shared time Machine backup with Airport Express?

  Hi all

  I looked around lately for a solution to this issue and who struggle to get by.

  I'm a musician, and at home, I have an iMac that I work on. Everything is there, basically. I have a Time Machine backup to an external drive.

  I also have my old MacBook that I use to play concerts. I have what I need for it there: especially Max/MSP patches, odd live recording and a few samples. I don't have a backup of it right now. Max patches are the only files not on my iMac.

  So far, all the files I need for two computers, I have sync with DropBox and OneDrive. I'm getting a little tired of copy things more, re-upload, forgetting where something is and having things scattered everywhere. Ideally I'd like a shared folder of a certain type that is always up-to-date on both computers. This folder will contain Max patches, live recordings and the weird thing I do away from home.

  I would also be able to save more flexible:

  • the iMac backup
  • Backup of MacBook Pro
  • Shared folder backup

  I've been looking around a bit and I'm not sure how best to do so. A kind of home server would be an option? I have not used one drop/airport/Time Capsule of Apple stuff before, so I'm not sure how they differ from each other.

  I like Time Machine, because I can't think to save things. If I could have three backups separated like the ones I mentioned (for the security and because my brain can deal with it better if it is presented that way), that upward with Time Machine or something similar, to some central place automatically.

  I looked at the airport in Time Capsule and it looks great, but I can't afford it right now. I also saw contradictory information on AirPort Express can be plugged into an external drive for backup, so if Time Machine can be used with wireless at all.

  I hope that what I am asking is logical. I would like the simplest solution to back up two computers and have a shared location for the common files needed on both.

  Thank you!

  Phil.

  So far, all the files I need for two computers, I have sync with DropBox and OneDrive. I'm getting a little tired of copy things more, re-upload, forgetting where something is and having things scattered everywhere. Ideally I'd like a shared folder of a certain type that is always up-to-date on both computers. This folder will contain Max patches, live recordings and the weird thing I do away from home.

  An option here would be to get a device connected to the network (SIN). This unit can store all the required files and be accessible to one of your computers on your home network. A number of these devices is also available remotely, when necessary. Here is an example.

  I would also be able to save more flexible:

  • the iMac backup
  • Backup of MacBook Pro
  • Shared folder backup

  I've been looking around a bit and I'm not sure how best to do so. A kind of home server would be an option? I have not used one drop/airport/Time Capsule of Apple stuff before, so I'm not sure how they differ from each other.

  I like Time Machine, because I can't think to save things. If I could have three backups separated like the ones I mentioned (for the security and because my brain can deal with it better if it is presented that way), that upward with Time Machine or something similar, to some central place automatically.

  To the extent not "have to think about backup things', Time Machine (TM) would be a solution that is easily available to you now. It would create separate for each Mac backups. In addition to using an external hard drive as you do now, other TM backup destinations could be:

  • A time Capsule
  • A 802.11ac AirPort Extreme with a connected USB hard drive. In this configuration, Apple calls the drive and the drive from the airport.
  • A NAS

  In the last item in the list, you see that a NAS could offer solutions for each of your goals. However, if you are on a tight budget, likely the most expensive company to undertake, as the physical drive of NAS enclosure can run around $400-600 only, without any installed readers. This is where the time Capsule can work out cheaper for you.

• Problem of AirPort Extreme with AirPort Express network expansion

  I have a dual-band Airport Extreme 802.11n that I bought in 2012 which is currently my home wireless network. I am trying to extend the network with a new AirPort Express with the AirPort 6.3.6 utility running OS 10.11 on an iMac. The Airport Express appears in the option other Wi - Fi devices. When I select it, AirPort utility tries to connect and then I get this message "an unexpected error has occurred. Try again. "Try again does not lead to a different result, and I can't seem to find useful information in the documents support or conversations. Any suggestions? Thank you!

  It should be easy enough to operate the express, but you must tell us all the info.

  Configure the Express in the same room as the extreme.

  Using wireless to expand? Then you simply plug power in the Express... and it should pretty much automatically connect to the extreme.

  If you want to extend through ethernet, you should connect the Express in the extreme and make sure that the configuration of the airport utility selects extend by wire.

  If the Mac does not work you have the iphone or ipad and use Airport utility for iOS... it tends to be more reliable.

  Still no luck does your Mac have port ethernet... in this case, you can plug it into the computer with ethernet and try again... more wireless implementation looks like sawing off the branch to that which you are sitting.

• 970cse with airport express and USB printing

  I have a hp 970cse on the network via a USB cable and the Airport express. Router is AirPort Extreme. iMac (OSX 10.9.2) sees and prints well wireless. iPad (IOS 7.1) is on the network, but can't find the printer. Prints from the possible ipad using this config? Thx for any help

  Hello Darwinband welcome to the Forums of HP.

  I see you are having problems printing from your iPad.  This printer doesn't support ePrinting or Airprinting, this printer is not compatible with an iPad. For more information, please consult this document on HP Web-Connected printers and support of the Services of Cloud.

  Please let me know if you have any other questions and I thank you for display on the HP Forums.

• Printing on Epson connected to an Imac with Airport Express

  I have a desktop computer with Vista. I have an Epson C88 + connected to an Imac. I have an Airport Express. The Vista machine sees and connects to the network. I installed the printer and print a test page. I can't print anything other than the test page. I tried to print a Word document and a document of TurboTax. I don't get an error message that just, it fails to print. When I go into the control panel of the printer is identified and has a green check mark. I tried looking for file sharing, printer sharing, etc. and everything seems fine and face it prints a test page is good, but I don't understand why it will print nothing else. Any help would be appreciated.

  Hi Johnhunt,

  Try the following steps.

  Step 1

  Run the Microsoft Fixit from the link below. Open the link and click the Fixit .
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  If the problem persists, try step 2.

  Step 2

  Uninstall the printer and then try to reinstall the printer using Add Printer Wizard. Follow the link below. Install only printer drivers If prompted.
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Connect the printer to the windows computer and let us know if you are able to print.

  I hope this helps.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Configuration HP6700 (41DF3D) of I-pad3 with AirPort Express.

  Impossible to follow through when "password" is asked that all network addresses are listed are locked. Also, the status on the AirPort Express Base Station light never goes solid green but still orange flashing. USB port on the base Station is connected to the USB port printer. A computer is NOT used. Help!

  I was able to 'load' 218 pages full of "usage guide" which has been mentioned on my I - pad. Then using the e - app 'HP' print all on my 6700. To operate the printer using router AirPortExpress? No, I have not yet resolved that but don't need that e-HP application allows me to print from the I - pad. I'll read the 'Guide' and perhaps much more. Thanks for the instructions. ARTprinter4

• Are there ways to OBIEE interface with client application?

  Our OBIEE 10.3.4 on Redhat, OBIEE version to connect to an Oracle Database 11.2.0.2 running on the same box of Redhat like OBIEE. Our application is based on java web application you use Tomcat, he point to the OLTP of Oracle Database 11.2.0.2 on a dedicated server from Redhat.
  
  One of the requirements for the original application was logical with complecated OLTP data process and create reports in text files. The customer wants now OBI allows you to view, print, and distribute reports. The best way to meet this requirement of change to the advanced stage of development seem to interface with OBIEE application, if at all possible. In this way, by clicking on a button in the GUI of the application, a stream of formatted data is sent to the OBI Stardoll service in response to a request. A client OBI page will then be displayed to shpw reports and allow users to print and distribute.
  
  Now there is some OBI API that allows an application to call to interface with OBIEE?
  
  Thank you.

  Hello

  I do not gave more experience with this subject, but I guess that's what you're looking for;

  http://download.Oracle.com/docs/CD/E12096_01/books/AnyWebServ/AnyWebServ_Overview3.html

  You might have to do some more research.

  Maybe Vincent could be of any help.

  http://oraclebizint.WordPress.com/2007/07/31/customizing-Obi-EE-SOAP-API/

  Good luck

  Daan Bakboord
  http://obibb.WordPress.com

• Help with Airport Express and Configuration capabilities

  I have a new Airport Express which is set to expand the network wireless (created by Time capsule).  Is it possible to also provide a wired connection to another device in this mode?  If so, how do I need to change the settings? The other device is a hub of lighting (not wireless) which must have an Internet connection to allow remote control of lights.  It is currently connected to the CT but its location does not cover a part of the House, the new AE is the perfect place.

  Is it possible to also provide a wired connection to another device in this mode?

  Yes

  If so, how do I need to change the settings?

  Some settings need to be changed. By default, both the "O" WAN port and port LAN <>- both act as LAN ports. Choose one or both to an active Ethernet connection.

  The other device is a hub of lighting (not wireless) which must have an Internet connection to allow remote control of lights.

  Turning off the hub of lighting, make the Ethernet connection to the AirPort Express and the hub of power upward. You should be in business.

• I want to use a Terminal Airport Express to extend network provided by my Fios router/modem without going through another airport base.  Is there a way to do this?  I understand that Apple does not support this, but surely there must be a way to do this.

  Can someone tell me how to set up an Airport Express Terminal to expand Network provided by my Fios router/modem without going through an airport as a base?  I understand that apple does not support this use, but my applecare Advisor said it's possible.  Thank you!

  Unfortunately, your AppleCare Advisor is wrong if he or she has told you that an AirPort Express to extend wireless signal of a Fios router/modem.

  Function of "Extend a wireless network" Apple is an exclusive feature that was designed by Apple engineers to extend the signal from another wireless only router from Apple. Thus, the AirPort Express... or any other router Apple besides... would not be able to extend wireless a Fios network.

  SO... you have the possibility to locate the Airport Express where it is needed... And... Connect it to the Fios router/modem with a permanent, wired Ethernet cable connection, then the AirPort Express can 'extend' in this way.

  Or... If you are ready to add a second AirPort Express, connect the first near Fios modem/router with an Ethernet cable, then the second Airport Express could extend the signal first Express wireless.

  Another way to say the same thing, is that if you want an Apple AirPort router to extend wireless network... then you need two Apple routers to achieve this goal.