970cse with airport express and USB printing

Similar Questions

• Help with Airport Express and Configuration capabilities

  I have a new Airport Express which is set to expand the network wireless (created by Time capsule).  Is it possible to also provide a wired connection to another device in this mode?  If so, how do I need to change the settings? The other device is a hub of lighting (not wireless) which must have an Internet connection to allow remote control of lights.  It is currently connected to the CT but its location does not cover a part of the House, the new AE is the perfect place.

  Is it possible to also provide a wired connection to another device in this mode?

  Yes

  If so, how do I need to change the settings?

  Some settings need to be changed. By default, both the "O" WAN port and port LAN <>- both act as LAN ports. Choose one or both to an active Ethernet connection.

  The other device is a hub of lighting (not wireless) which must have an Internet connection to allow remote control of lights.

  Turning off the hub of lighting, make the Ethernet connection to the AirPort Express and the hub of power upward. You should be in business.

• Extend my cable modem network via Airport express and Time Capsule

  I am trying to expand my home network through my Airport express AND a Time Capsule. Installation of extension through the airport was easy and successful. I then tried to expand further with Time Capsule, but it gives me the opportunity to launch a new network. What do different to fix my Tim Capsule to my global network?

  I then tried to expand further with Time Capsule

  Unfortunately, it is not possible to do what you want... given that the function of "extend a wireless network" Apple will not accept to be extended once the network is not two.

  The other question that you probably, it is that unless your 'main' router is also another router from Apple, the Express is not really 'extension' of the network at all, despite what you think.  More likely, the Express is "membership" in the network. It can be used to connect a USB printer remote in this environment or for use with AirPlay... but the Express doesn't "spread" or "repeat" when he joined the network.

  If you want to check if the Express is really extend the network, and you have a Mac laptop... after back and provide you with a few steps.

  But even if the Express could be the extension of the network... Time Capsule will have to connect to the network using a permanent, wired cables Ethernet... ideally to your main router, but it might work OK if you connect to the Express.

• airplay iOS 10 with airport express

  Impossible to find airplay with Airport Express, but works well with apple tv

  some1 help me

  Same problem with my iPhone 5 and IPad Mini after upgrading to IOS 10.

  Firmware Express Airport: 7.6.7

• Mini TiVo with airport express

  My question is about the tivo, the Airport express and the extreme of the AC.  have the romaio standard tivo in my room and the mini in the other room about 25 feet, with thick walls about 7 feet.  the mini is to cut the audio and the video of course.  If the research online, wanting to know the best solution.  If the connections are such:

  1st room:

  Extremes of AP connected to the modem

  romaio connected by ethernet to AP extreme

  2nd room:

  AP express connected by ethernet to tivo mini

  Deck AP express under the name "extended" to the extreme

  bridge over the 2.4 ghz network

  so the question is whether to 'extend' or 'join' the network?

  or the other bridge then on the 2.4 ghz or 5 GHz?

  all the details, let me know

  There is no significant difference.

  so the question is whether to 'extend' or 'join' the network?

  or the other bridge then on the 2.4 ghz or 5 GHz?

  The question is fair level of signal and bandwidth.

  It is difficult to get the numbers now, as the utility v6 airport is no longer a toy only utility is to say a tool. As the use of a hammer plastic actually hammer in nails.

  Try to get the speed of connection... in v6, you roll your pointer over the connection. As thus.

  I have two gen5 connected AE as extend wireless... It did not work with long connection so I moved to the extreme a few feet from the other device. They are now about 4' apart.

  The connection now shows 195 MB/s, but you need to playback during the actual file transfer. It will go down considerably the work.

  

  If you can get a machine more old computer or windows and install the utility 5.6 you will get much more information.

  

  Links are not the same from one end to... Although here, it works fine. As I had before that connection showed ok one end but much poorer on the other... This info is now impossible to obtain in utility v6.

  25 ft away, with thick walls about 7 feet.

  I'm sure that the walls are 7 thick inches rather than 7feet.

  But everything depends on the construction and the number of walls.

  Light framing lumber and Sheetrock (rockboard?) have fairly low resistance wireless.

  Brick or concrete walls have a lot of resistance wireless... you must use ethernet or adapters EOP.

• How can I make it work with just an Apple TV, AirPort Express and iPod/iPad/iPhone?

  Hello people of Apple, I have some questions about a new "setup" of Apple products that I hope I can get to work between them. In other words, I need to know if what I am wanting to do in fact is possible with this new configuration.

  Current set up:

  • mini iMac (a former member of 2010, but fully updated for OSX El Capitan)
  • drive external HARD as the Time Capsule disk and with tons of music not purchased through the iTunes store (from my CD collection)
  • Old Airport Express connected to the modem (which received the fiber of my ISP)
  • 3rd Gen iPad
  • iPhone 6 more (work phone)
  • iPod Classic 5th Gen with close to 30 GB of my library and plugged on my car stereo to
  • iPod Shuffle 4th Gen for gym

  I want my setup to be:

  • Apple TV
  • Airport Extreme with external HARD disk * even from above * (my library backup iTunes music around, videos and photos) connected via USB
  • iPad Pro
  • iPhone 6 Plus
  • iPod Classic 5th Gen that I want to stay plugged into my car stereo to
  • iPod Shuffle 4th Gen for gym

  So my questions are: can I continue to sync my iPod Classic and my iPod Shuffle without a computer (I guess maybe not), and if so, HOW? I'll be able to sync the iPad and iPhone via wifi without computer as well? Also, I'll be able to play my library directly from the drive external HARD using the Apple TV?

  I'm guessing / hoping that the new Apple TV from the music/iTunes app and the pictures/iPhoto app, I can connect my iPod to the airport and synchronize them via the app AND connect Apple TV directly on the HARD disk via the airport. And perhaps also to synchronize the iPad and the iPhone on wifi in all Apple TV apps or something or maybe I just need any Uploader in iCloud and will not even need the HARD drive more except as a backup. Help!

  You have need of computer-Mac or PC. You can sync the iPhone/iPad wireless, but only via a computer in iTunes, I'm not sure about the capacity of wifi iPod.  Not to mention the iTunes, the software is required to manage the devices and media.  Important note: you must always back up your purchases - just because you buy a book, movie, TV show, song today does not necessarily mean that the media will be available from Apple servers for eternity.  The Studios retain rights and may, at any time, sign an exclusive agreement with a network, streaming provider etc which would then remove this file to be available on Apple servers.  You must download and save purchases - that would need a computer running iTunes software. You could buy storage for all your media, but then additional personal iCloud yet you would need a computer to manage. In addition, with respect to the Apple TV, you cannot connect all readers.  The USB port is only for the restaurant and full-service.  The Apple TV is a streaming device, but for the local media, he uses homeshare, which requires a computer iTunes rather than be connected directly to a storage device.  Although there are other applications like plex or infusion but they would require a NAS configuration rather than the HARD disk, and you would want / need a computer to manage the NAS server...

  the only thing you want to eliminate is the only thing that is required for all...

• Printing on Epson connected to an Imac with Airport Express

  I have a desktop computer with Vista. I have an Epson C88 + connected to an Imac. I have an Airport Express. The Vista machine sees and connects to the network. I installed the printer and print a test page. I can't print anything other than the test page. I tried to print a Word document and a document of TurboTax. I don't get an error message that just, it fails to print. When I go into the control panel of the printer is identified and has a green check mark. I tried looking for file sharing, printer sharing, etc. and everything seems fine and face it prints a test page is good, but I don't understand why it will print nothing else. Any help would be appreciated.

  Hi Johnhunt,

  Try the following steps.

  Step 1

  Run the Microsoft Fixit from the link below. Open the link and click the Fixit .
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  If the problem persists, try step 2.

  Step 2

  Uninstall the printer and then try to reinstall the printer using Add Printer Wizard. Follow the link below. Install only printer drivers If prompted.
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Connect the printer to the windows computer and let us know if you are able to print.

  I hope this helps.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Wireless shared time Machine backup with Airport Express?

  Hi all

  I looked around lately for a solution to this issue and who struggle to get by.

  I'm a musician, and at home, I have an iMac that I work on. Everything is there, basically. I have a Time Machine backup to an external drive.

  I also have my old MacBook that I use to play concerts. I have what I need for it there: especially Max/MSP patches, odd live recording and a few samples. I don't have a backup of it right now. Max patches are the only files not on my iMac.

  So far, all the files I need for two computers, I have sync with DropBox and OneDrive. I'm getting a little tired of copy things more, re-upload, forgetting where something is and having things scattered everywhere. Ideally I'd like a shared folder of a certain type that is always up-to-date on both computers. This folder will contain Max patches, live recordings and the weird thing I do away from home.

  I would also be able to save more flexible:

  • the iMac backup
  • Backup of MacBook Pro
  • Shared folder backup

  I've been looking around a bit and I'm not sure how best to do so. A kind of home server would be an option? I have not used one drop/airport/Time Capsule of Apple stuff before, so I'm not sure how they differ from each other.

  I like Time Machine, because I can't think to save things. If I could have three backups separated like the ones I mentioned (for the security and because my brain can deal with it better if it is presented that way), that upward with Time Machine or something similar, to some central place automatically.

  I looked at the airport in Time Capsule and it looks great, but I can't afford it right now. I also saw contradictory information on AirPort Express can be plugged into an external drive for backup, so if Time Machine can be used with wireless at all.

  I hope that what I am asking is logical. I would like the simplest solution to back up two computers and have a shared location for the common files needed on both.

  Thank you!

  Phil.

  So far, all the files I need for two computers, I have sync with DropBox and OneDrive. I'm getting a little tired of copy things more, re-upload, forgetting where something is and having things scattered everywhere. Ideally I'd like a shared folder of a certain type that is always up-to-date on both computers. This folder will contain Max patches, live recordings and the weird thing I do away from home.

  An option here would be to get a device connected to the network (SIN). This unit can store all the required files and be accessible to one of your computers on your home network. A number of these devices is also available remotely, when necessary. Here is an example.

  I would also be able to save more flexible:

  • the iMac backup
  • Backup of MacBook Pro
  • Shared folder backup

  I've been looking around a bit and I'm not sure how best to do so. A kind of home server would be an option? I have not used one drop/airport/Time Capsule of Apple stuff before, so I'm not sure how they differ from each other.

  I like Time Machine, because I can't think to save things. If I could have three backups separated like the ones I mentioned (for the security and because my brain can deal with it better if it is presented that way), that upward with Time Machine or something similar, to some central place automatically.

  To the extent not "have to think about backup things', Time Machine (TM) would be a solution that is easily available to you now. It would create separate for each Mac backups. In addition to using an external hard drive as you do now, other TM backup destinations could be:

  • A time Capsule
  • A 802.11ac AirPort Extreme with a connected USB hard drive. In this configuration, Apple calls the drive and the drive from the airport.
  • A NAS

  In the last item in the list, you see that a NAS could offer solutions for each of your goals. However, if you are on a tight budget, likely the most expensive company to undertake, as the physical drive of NAS enclosure can run around $400-600 only, without any installed readers. This is where the time Capsule can work out cheaper for you.

• Configuration HP6700 (41DF3D) of I-pad3 with AirPort Express.

  Impossible to follow through when "password" is asked that all network addresses are listed are locked. Also, the status on the AirPort Express Base Station light never goes solid green but still orange flashing. USB port on the base Station is connected to the USB port printer. A computer is NOT used. Help!

  I was able to 'load' 218 pages full of "usage guide" which has been mentioned on my I - pad. Then using the e - app 'HP' print all on my 6700. To operate the printer using router AirPortExpress? No, I have not yet resolved that but don't need that e-HP application allows me to print from the I - pad. I'll read the 'Guide' and perhaps much more. Thanks for the instructions. ARTprinter4

• Problem of AirPort Extreme with AirPort Express network expansion

  I have a dual-band Airport Extreme 802.11n that I bought in 2012 which is currently my home wireless network. I am trying to extend the network with a new AirPort Express with the AirPort 6.3.6 utility running OS 10.11 on an iMac. The Airport Express appears in the option other Wi - Fi devices. When I select it, AirPort utility tries to connect and then I get this message "an unexpected error has occurred. Try again. "Try again does not lead to a different result, and I can't seem to find useful information in the documents support or conversations. Any suggestions? Thank you!

  It should be easy enough to operate the express, but you must tell us all the info.

  Configure the Express in the same room as the extreme.

  Using wireless to expand? Then you simply plug power in the Express... and it should pretty much automatically connect to the extreme.

  If you want to extend through ethernet, you should connect the Express in the extreme and make sure that the configuration of the airport utility selects extend by wire.

  If the Mac does not work you have the iphone or ipad and use Airport utility for iOS... it tends to be more reliable.

  Still no luck does your Mac have port ethernet... in this case, you can plug it into the computer with ethernet and try again... more wireless implementation looks like sawing off the branch to that which you are sitting.

• Are there 2 seconds audio delay with Apple TV as with Airport express

  Audio reading of the Mac to stereo via Airport express has 2 second delay. If I replace the airport express to Apple TV and connect optical to HiFi audio link ATV still do 2 seconds?

  Welcome to the Apple community.

  I have no such delay when I play audio via an Airport Express station. You must determine if the problem is with your network or device that you have connected to the AirPort Express Terminal. I don't know what other hardware you have for you for you help in this task.

• Problems with AirPort Extreme and Qwest Modem/Router.

  I have a Qwest ActionTec 1000 DSL VDSL2 gateway and want to disable the functions of router wireless and those through direct AirPort Extreme. I know that in the Modem I have to disable the functions of addressing and turn them in the AirPort Extreme to avoid address conflicts, but what are the settings I need to change in both devices? And what is "A Transparent bridging" on the side of the modem?

  But what are the settings I need to change in both devices?

  Sorry, we can't help on the settings for the modem/router, because it would be a question of Qwest as to if this is even possible and if so, if Qwest will support this type of installation. Sometimes the ISP lock modem/router settings, and although it seems as if you can change the basic configuration of the unit, you can really.

  Yes, it is possible that another user of Qwest has done with the same modem/router you have and an AirPort Extreme... and may know the answer... but the chances of the person who holds this information also to see this post are slightly above zero. But, I guess it's possible.

  If the modem/router can be configured to operate only as a simple modem, then the next step would be to get your Mac connected directly to the modem to test the connection in this way. If Qwest is going to help you, they will do it no doubt with your Mac connected directly to the "modem" as well.

  Once you know the exact details of the PPPoE authentication to establish a connection, these parameters can be transferred to the AirPort Extreme and removed from your Mac. To do this, you reset the AirPort Extreme back to default and then put settings in place again. The installer should detect the PPPoE connection and then ask for your login information.  After this, the correct settings apply to AirPort Extreme during the installation.  You can still use the same wireless network name and password you used before if you wish, or set up a new network name and password.

  PPPoE on the routers of the airport, at least in my experience, was not a reliable way to connect when I tried this in the past, but you don't really know how well... or even if... it will work until try you it. Unless you really want the airport to distribute IP addresses to devices on your network, things would be a lot more simple if you went ahead and used the modem/router "such what" and then let the airport works in Bridge Mode to transfer information in connection with network devices.

  When you have the modem/router converted to act as a simple modem and made a successful connection using your Mac connected directly to the "modem", post back and we can help with the configuration of the AirPort Extreme if you need more advice.

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• Time capsule airport unplug my Airport Express and internet

  Howdy,

  I just brought my Airport Time Capsule of the work. I have the joint via an Ethernet cable to my extreme, both are in my basement. Upstairs, I have a set Express in place to expand the wireless. The extreme and Express worked for many years now.

  Once the time Capsule has been recognized in the public services of the airport, he made an update of the firmware.

  After that, I edited the settings for the time Capsule to my home network and set it to "develop wireless."

  Extreme, Express and Time Capsule all had them green to light up in public services - so I tried to run a Time Machine backup, and things went sour.

  The cable modem the extreme is connected to started to abandon the connection every 30-45 seconds and the Express light went red and there is no longer recognized, so I clicked "forget" to remove it. Time Machine could not locate the time Capsule.

  So I unplugged the Time Capsule, all rebooted and now my extreme and Express up and running again.

  What waste?

  Thank you

  Dan

  After that, I edited the settings for the time Capsule to my home network and set it to "develop wireless."

  I think you probably mean "extend a wireless network".

  This is the bad setting... because it would be used only if the time Capsule connected to your network using Wireless.  You specify the Time Capsule connects using Ethernet.

  Here is what is happening now... the time Capsule waiting for a wireless connection, but he gets an Ethernet connection.  This translates into a huge feedback loop that effectively blocks your network.

  The correct setting for the time Capsule would be "create a wireless network"using the same exact wireless network name, security and password as other Apple routers. " Finally, make sure that the time Capsule is set to run in Bridge Mode before you click Update to save the new settings.

• Error: 0X0800C0133 with Outlook Express and cannot receive e-mail

  An unknown error has occurred with my Outlook Express and I can't receive emails. It is erroe 0X0800C0133. Please I need help on how to remove it and fix my Email

  It would be useful also (in terms of it being assistance), if you can insert your message standard on this subject as it goes in detail on the issue, than my comment and the topic of the thread inside error number, many perhaps find via search.

  Thank you

  Steve