Are there opportunities that Windows updates are causing a loop of auto repair?

Similar Questions

• Windows 8 stuck in the loop of auto repair

  Hey,.

  Yesterday, I restarted my computer after installing a program, then it started to do this, it will forever... My last pc I could press F11 or something and enter the system recovery, this PC it brings me to the uefi asrock configuration utility, which I have no idea what to do...

  I can't figure out how to start a system recovery, or how to get in safe mode, I know Win7 I could press F8 and choose my boot method, but that doesn't work here, and all I can find on google is how to start in safe mode when your computer is on and I can get on the desktop which is completely unnecessary, because when you use safe mode if your computer was working...

  Before this happened I used my task manager to modify some applications that run at startup, but it was like Samsung Kies and Adobe stuff, nothing to do with the system, and I don't think that it would anyway.

  Then I was installing tortoisesvn on reboot, this happened...

  It's the time of the final, I need to come back on this PC

  Here is a video of my computer law to market

  http://www.YouTube.com/watch?v=aWRDLM68xWo

  I touched the loop after a windows update on 1/19. If you add up all the hours of research to fix poster we should have everything checked. If m$ has been working on that, we would know. canned response makes me cringe like directv told me to hit the red button... I've exhausted all the solutions I found, and that you do not want free files.

• Windows 8 is stuck in a loop of auto repair

  My windows 8 get in a loop of auto repair and he couldn't fix it. And what he said journal file d:\windows\system32\logfiles\srt\srttrail.txt

  What should do?

  Hello Coonut,

  Thank you for your reply,

  I suggest you to connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting methods listed below.

  See the link to create the Setup disk:

  How to create the installation media for a PC refresh or reset:
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  wish you a happy new year!

  Thank you

• After compacting emails, all my emails from September 2011 until now have disappeared. Are there opportunities that I get back them?

  After compacting emails, all my emails from September 2011 until now have disappeared. Are there opportunities that I get back them? I use Outlook Exprees and he suggested that I should compact messages. I've done it several times before and everything was OK until

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
   
  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  Recovery methods:
   
  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
   
  To restore a folder bak on the message store folder, first find the location of the message store.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
   
  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
   
  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
   
  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
   
  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:
   
  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx
   
  And see:
  
  http://www.oehelp.com/OETips.aspx#4
   
  A general warning to help avoid this in the future:
   
  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx  

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 Edition Home Premium. After that windows update will in a reboot loop

  Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

  Hi pbmass,

  I want to clarify if you are able to start the computer on the desktop after the system restore.

  Follow the steps mentioned below and then try to install the updates manually

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  Step 3: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 4: Download the update manually and then install them

  The .NET Framework 4 Client Profile is available on Windows Update

  http://support.Microsoft.com/kb/982670

  Description of the update for Silverlight:

  http://support.Microsoft.com/kb/982926

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen 116 every time that Windows updates

  original title: 116 every time that Windows Update BSOD

  OK, so I'm in a bad mood, so this will be brief. I managed to understand I get BSOD every time I update my graphics driver, and I have no idea what kind of card I because it is a company built PC (never buy Dells) and the owner of this PC (that is to say my father and family) reinstalled Windows compeletly before I could look, so all I have is "Standard VGA Graphics Adapter" in the Device Manager. Try to manually update the drivers causing the BSOD once I chose to run windows normally (it runs in safe mode now too, which is of course the pre reinstall improved)

  So I don't really know what to do at this point.

  Hello

  Dell can tell you what the graphics device in the computer is so check with their support, their online
  documentation and drivers and ask in the Dell forums for known issues. Check the model number
  of your computer on the Dell Site for drivers - it should indicate the appropriate driver.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ========

  The fact that it BlueScreens when you try to update the driver could indicate there is something wrong
  with the video device. Because it has a "Standard VGA adapter' this means that the driver does not load.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Realtek 8185 Driver Windows Update installation causes system crash

  Install the Realtek 8185 Extensible 802. 11b / g wireless listed device driver as optional in windows update in windows 7 ultimate 64 bit results BSOD and system becomes unable to boot (System Restore will fix it).

  I am writing this to see if it is a special situation with my system or if it's a widespread problem, the following driver Details.

  Camera works great with the default driver, so if someone is going to tell me do not install this driver and look for another who is not the issue. Problem is that this driver in Windows update will cause the crash (BSOD) and system does not start until the restoration of the system is used.

  System Specs:
  OS: Windows 7 RTM x 64 Ultimate (new installation)
  P: AMD X 3 720
  M: 4 GB DDR3
  VC: GTX 260
  MB: Gygabyte MA790XT-UD4P
  (Related to the problem) wireless adapter: Realtek 8185 Extensible 802. 11b / g Wireless Device

  Driver details:
  Realtek Semiconductor Corp. - network - Realtek 8185 Extensible 802. 11b / g Wireless Device

  Download size: 409 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Optional

  Software update of Realtek Semiconductor Corp. network released in September 2009

  More information:
  http://winqual.Microsoft.com/support/?DriverID=20298246

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  Hello

  You must go to Realtek and get the current driver, it works fine on my system. Do not do it just
  means that you're stuck in the loop, you're in and the pilot trying to update Windows Installer is a
  an old man just certified for Windows (MS is far behind the pilot certification and accreditation is not
  means that they work properly).

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• After that windows update 2 March 2011, windows crashes on shutdown.

  I installed SP3 this week. Last night there was a Windows update that stopped as he tried to restart the computer. He stopped there and when I made a stop every evening at "saving your settings...". "Any suggestions on how to solve this problem?

  Hi BarbaraWillis,

  · What is the number and the model of the computer?

  1 check the updates of Windows have been installed on the computer and also if any update could not be installed. Follow the steps for the same:

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the status column of this window, find the failed to install update and then click on the red X.

  (d) a new window opens that displays the installation error code.

  2. also check any exact error message or the error code is listed in the event viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  With regard to:

  Samhrutha G S - Microsoft technical support.

• I said that Windows update to download all updates, but let me choose when to install them.

  I asked the question "I said that Windows update to download all updates, but let me choose when to install them."
  I thought that my problem was resolved, but the problem is still ongoing.

  The link to my previous question and answers is http://social.answers.microsoft.com/Forums/en-US/user/threads?user=Stew1957

  Please help, what else can be tried.

  PS I have since uninstalled MSE and installed Norton Antivirus 2011

  1. my hard drive has been formatted and re loaded from scratch.

  2. my opperating sytem is 32 Bit Win 7.

  Thanks stew

  To avoid confusion, please report all further follow-up replies to your original thread, stew: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3aeb2786-6fee-46e8-9d30-f54e1143a9e1

  Thank you!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After that Windows update restarted as requested, by getting only now white screen

  After that Windows update restarted as requested, by getting only now white screen.

  Unable to set up windows

  I was able to boot in safe mode and restore that updated windows.  Then found that the monitor is released.  Again, everything is good

• Impossible to install KB2686827 and KB2656368, keeps telling me that Windows Update encountered an unknown error. Code 641

  Check and fix the completed transaction. All of the files and registry keys listed in this operation were repaired successfully.  But I'm not able to upgrade windows (KB2686827) and (KB2656368).  Its keep telling me that Windows Update encountered an unknown error. 641, the code Please HELP. I have Windows Vista Home Premium 32 bit. Thanks in advance.

  Original title: of my CBS.log

  Try the manual download for both method:

  Update of security for Microsoft .NET Framework 4

  Update of security for Microsoft .NET Framework 4

• After that Windows Update installation, some programs fail to open but take up to 25% of the CPU usage

  Hi I have a HP Probook 6470 b. After installation of the latest series of Windows updates my laptop fails to open the common programs such as Word 2010, Adobe Acrobat Pro and Internet Explorer 11. Other programs such as Excel 2010 and Chrome are not affected. Programs not just open, but on the control task manager, they are each taking up 25% CPU, which is the set of core.

  Strangely, on a machine identical to the work occurs the same problem but on a desktop computer, I can't reproduce the problem. With my laptop I use system restore and the problem goes away until Windows Update to run again - there are quite a few updates and I can't identify what the source of the problem.

  Everyone knows about this problem?

  Hello. In the end, I managed to get out. It was Microsoft EMET that was causing problems. Ultimately I unchecked all boxes and now all my programs work correctly. Strangely Chrome and Excel have been unchecked already which is the reason for which they worked.

• After that windows update computer won't start

  After that the most recent windows updated my computer did not start...  I did update the windows twice and each time I had to restore my computer to an earlier time. I don't know why after upgrading my computer does not... Can someone help me with this please?

  These are updates that I was installing that caused my computer to make it not start:

  A security update cumulative for Internet Explorer 8 for Windows Vista (KB2360131)

  Download size: 9.2 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update of security for Microsoft Office Excel 2007 (KB2345035)

  Download size: 8.5 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update of security for Microsoft Office System 2007 (KB2344875)

  Download size: 7. 4 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update of security for Microsoft Office System 2007 (KB2345043)

  Download size: 2.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update security for Windows Vista (KB2207566)

  Download size: 189 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update security for Windows Vista (KB2378111)

  Download size: 12.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update security for Windows Vista (KB2387149)

  Download size: 557 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update security for Windows Vista (KB979687)

  Download size: 881 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update security for Windows Vista (KB981957)

  Download size: 1.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update security for Windows Vista (KB982132)

  Download size: 118 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Update for Windows Vista (KB2345886)

  I found KB981957 to be the culprit on that I worked on a system of XP SP3.  With this update installed, I get an error C000021A Service Control Manager BSOD.  I have manually uninstalled this update by using the Recovery Console and then used Windows Update through IE and deselected this update.  All the other updates installed correctly and the system starts properly.  I would like to know why this update is causing this problem.  Anyone with the same problem?

  It reminds me of a similar situation earlier this year with BSOD KB991765.  The cause of the BSOD is a virus that has infected system driver files.  Once clean, the installation worked very well.  I've done many scans on this system and have not yet found any viruses.

• Cannot run Windows Update in Vista 64 bit Ultimate. Download popup that Windows Update cannot currently check the updates, because the service is not running.

  Windows Vista SP2 from worm 6.0.6002 Build 6002.  KB2675157 Explorer 9.0.8112.  Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall).  My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running.  I ran last update of Windows in April and he was properly executed.  I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started.  I am able to run updates on all the software outside of windows.  I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products.  I don't have another PC with Vista I can compare the registry entries.

  Hello

  Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

  Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

  Method 3 :

  Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.