Area of selection will not stop be selected

Similar Questions

• HP Officejet Pro 8500 A909 all: sorftware HP installation program will not stop running

  I recently uninstalled the software and drivers for my printer as suggested here.  I installed the drivers and software the latest complete features of the HP customer service.  Now the program will not stop running even after it has completely installed. The disc in the picture will not stop running and the window does not close.

  Hey @David146,

  Welcome to the Forums of HP Support!

  I see that you have some problems with the judgment of some installation of HP software to run on your PC of Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your PC, press CTRL, ALT and DEL keys at the same time.
  2. Click Start Task Manager.
  3. Select the HP software from the list.
  4. Click end task.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL

  Vista Home premium 32-bit

  Hello

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  ABon the Defender being turned OFF

  With MSE installed Windows Defender is supposed to be disabled.

  MSE has been designed with its own version of Windows Defender under its own program.

  If the two were running, it would cause system conflicts.

  See you soon.

• After updating, stacked widget will not stop AutoPlay

  Hello-

  On the home page of a Web site I've created, I used a composition widget to scroll recommended youtube videos. It is designed for automatic playback, sliding from the video to the video when you arrive on the page (stacked option selected), then stop AutoPlay when a thumbnail is selected.

  Now that I updated day/upgrade, AutoPlay will not stop!  Once you select a thumbnail, the AutoPlay just starts again. It is a problem because I need the user to watch the youtube video in the "slide" that they have chosen.

  Any way around this? or can it be resolved?

  Thank you

  -Cord

  We broke him in the 2.0 update. 2.1 should go live next week. It includes a fix for this. Until then, I'm sorry but I'm not aware of a workaround.

• Tried to import pictures. Will not stop or go away and I can't turn off my laptop

  I was importing pictures from a SD card to my Macbook pro and tried to do them all at once. There were about 700 pictures. Once, I moved their this tab below that presented themselves. After about 5 minutes of nothing don't be going on I tried again and now there are 2. I waited about an hour and nothing changed so I pressed X to stop the copy, and now it won't go away. He won't let me leave and because it will not stop I can't turn off my computer. What should I do to get rid of this.

  

  The easy way to recover is to hold down the power button until it turns off the MacBook Pro. Press the power button to restart the MacBook Pro.

• Laptop will not stop or sleep

  Hello

  I recently bought an Acer E5-571-54YJ.

  The laptop works very well and fits my needs for the school.

  Only problem I have with it is that it will not stop or go into sleepmode.

  When I stopped it after a few seconds when the screen goes black I mean the closed disc and fans to stop spinning, but blue remains on. I must then manually turn it off by holding the power button.

  Even with its in sleep mode. The light stays on and I can't turn it back on again. I have to first manually stopped in now the power button and then start it upward.

  I tried to disable the quick start, but this does not solve the problem.
  I hope someone can help me quickly because it's really annoying that I can't put it in mode 'sleep'.

  If you want more information, just ask.

  Greetings,

  Jean-Paul

  First of all, make sure that you have the latest version of the BIOS.  If the update to the latest version of the BIOS fixes the problem, then please don't read any more.  If the update to the latest version of the BIOS doesn't fix it, then continue reading.

  http://www.Acer.com/AC/en/us/content/drivers#_ga=1.190056232.264310007.1474604665

  

  -------------------------------------------------------------------------------------------------------------------------------------

  Do not read anything below, or attempt anything below unless you have the latest version of the BIOS and will always have the problem.

  If you have Haswell-ATU as the computer linked below - i5 4210U, then the only two known workarounds I know are using the Intel Management Engine interface driver 8.1 Windows 9.5 or install Intel MEI 11.0.0.1181.   If you have Intel Management Engine interface driver 11.0.0.1146 installed, it would be the problem.

  https://UK.hardware.info/product/269206/Acer-Aspire-E5-571-54yj/specifications

  http://community.Acer.com/T5/S-and-R-series-laptops/Acer-Aspire-S7-392-power-will-not-turn-off/m-p/3...

  http://community.Acer.com/T5/E-and-M-series-laptops/E1-572-won-t-go-into-sleep-any-longer/m-p/405847...

  http://community.Acer.com/T5/S-and-R-series-laptops/R3-471T-not-shutting-down-completely-or-turning-...

  Internet search or this forum.  There are tens of thousands of messages that describe problems associated with sleep/stop Haswell-ATU and Windows 10 and usually driver boost a/k/a turbo Intel MEI 11.0.0.1146 11.0.0.1146.

  Yet once, most people use the 9.5 intel management engine interface driver (a Windows 8.1 driver) as a workaround to resolve the problem.  Go to Device Manager and try to restore.  Roll back may or may not give you the Windows 8.1 driver.  You may need to install it manually.

• Laptop will not stop after update to 8.1 windows

  I have a new aspire E1 - 572G that will not stop completely during a windows 8.1 update

  I updated the Bios and downloaded the drivers from the support site.

  I did a restore to factory default settings and tried... again no luck

  I installed windows 8.1 after installing the updates for windows al.

  I'm not left how to solve this problem!

  Any suggetions are welkom.

  Found! Why are there two displayadapters in this notebook?

  I removed the intel one and rebooted. Windows dectected the displayadapter of intel again... problem solved!

• whenever I connect to the web, windows setup will light up. He continues to ask the companies to office and will not stop. He interrupts everyone and everything that I do everything online

  I can't windows to stop coming on and asks me to install the desktop business drive. It starts as soon as I connect and will not stop, interupting everything what I do online

  Hi marcus,

  1. What is the full error message that you receive?

  2. have you recently trying to install a program on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails, then repair Microsoft office on the computer and check if it works.

   

  How to understand the repair feature in Office 2003 and Office XP

  http://support.Microsoft.com/kb/822238

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The cursor flashes constantly and will not stop.

  Separated from this thread.

  It does not work. I'm not using Chrome. I use Firefox. The cursor flashes constantly and will not stop. Now, as I type, everything works fine. But in the contrary case, the cursor flicker with the small guard wheel busy with her.

  I had this problem as well - but it has happened when I loaded to the top of Chrome; I tried a lot of different things, but could not solve the problem.

  Then, I saw the post from TonyBrownCloudCo, and I knew he was on the right track here.

  Go to the Google Chrome settings > advanced settings

  Disable Google Cloud Printing - it is a used questionable spooler built-in Chrome browser, it must come from the recent update, because I've never had a problem with it before.

  I hope this works for everyone.

  "If you have explored all the possibilities and tried every permutation, everything that you have, no matter how irrational it seems, it is the truth." Quinn, 2012

  Hello Willie,

  Thanks for posting your query on the Microsoft Community.

  I imagine the inconvenience you encounter and I will definitely help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1 are you having this problem with Internet Explorer as well?

  2. you remember changes to the system before this problem?

  In the meantime, I suggest you return the form as follows article below and check if this can help:

  How to stop a blinking cursor?

  https://support.Mozilla.org/en-us/questions/943469

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you

• I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  How can I fix it? Nothing in help or on the Site.

  Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

  That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

• Look at the maps app will not stop

  When I look for direction in the maps on the watch application, it will not stop after that. I looked for directions to the airport, and then it does not cancel and kept taking me to the airport. I have ensured the application Maps on my phone was not working and he cancelled it but always watch will not stop.

  I tried it yesterday and now today the watch gives me directions to the airport.

  I tried to remove it from the docking, restarted my watch. Watch app from the phone Checked, but nothing works.

  Hello

  To stop your watch directions: open the Maps app on your watch > firmly press the display > press on for policy decisions.

• The SPACEBAR keystroke will not stop.

  My iMac recently started having a problem where the system gets a touch SPACEBAR which will not stop. I think that is what is happening based on the spaces added to the text on the screen in different applications, and from the keyboard Viewer which shows the SPACEBAR constantly depressed.

  This isn't a device keyboard problem. I tried several keyboards. I also tried to unplug all connected to the mac and rebooting. The problem persists. I stop after several reboots (which seems a coincidence). I have also reset the PRAM, which seemed to have fixed, but now he is back (after about 24 hours).

  I don't know what else to try. I have not installed new hardware in the computer, since I bought it (upgrade of ram). It worked fine for 1.5 years.

  Try resetting the SMC by iMac SMC and PRAM reset, it may take several resets to work.

• El Capitan will not stop or restart.

  El Capitan will not stop or restart.

  My Macbookpro 2015 EL capitan will not stop or restart and hangs with a desktop wallpaper.

  Any help?

  If you have installed the Wacom software try to uninstall.

• After the Macbook to Yosemite 10.11.15 update, it will not stop

  I have therefore updated the latest version of Mac OS x at 10.11.15. During installation, all work fine including the reboot and restart the macbook. But when I tried to stop my Macbook, it will not stop. The macbook has not frozen, but the tab is disappear after click on stop. Now, I have the macbook shutdown by pressing the power button / stop. Is there a solution?

  Software for Tablet Wacom has been proven to show this behavior. Uninstall or try to remove your connection point

• Satellite M40X-115 - cursor will not stop!

  I have a toshiba Satellite M40X-115 laptop with XP. My cursor starts moving and will not stop. For example when I try to log on to the laptop and click in the password field. the cursor starts moving, fills the space, I try to delete it, but the cursor continues to move. When you search the web, if I click on the arrow down, IE starts to scroll to the bottom and will not stop. If I open word, the time wherever I click on the page, the cursor starts to spacing.

  Any suggestions?

  It is not easy to understand what the problem is here, but did you notice this problem when you disable touchpad and you use an external mouse only?