Areca 1882IX PCIE 3.0 Raid Controller - need help

Similar Questions

• Install the Mini PCI wireless network card. Need help!

  Hello
  I have laptop Toshiba 5200-701 which is upgradble of wireless network, so I bought the mini PCI card Philips wireless brand. The reference is PH12127-E/PH11107-E and support 802.11a/b/g network address MAC 00 4F 05 43 88 F4.
  When I inserted the card in the laptop it shows new hardware found and then I downloaded website IBM software since I was told that this card is basically designed for laptop IBM, however, my laptop is unable to install the software and still facing problem... so please could someone help.
  Thank you very much.

  Moral salvation

  Well, in my opinion, you bought a bad wireless card. I don t think that your game can works with your device. Before you buy some hardware components, you need to check the compatibility of these parts. Toshiba service partners always have information about the units on the right. However, I found a wireless card that is compatible with your laptop. It's a PA3212U-1MPC.

  Good bye

• Need help to understand the manifest

  Our server:

  Service tag

  Computer model PowerEdge T610

  At a 341-8785: PERC 6 / i SAS RAID controller, 2 x 4 connectors, internal, PCIe, 256 MB Cache listed on the manifest. We would like to know if - as embedded (we have not changed hardware from the front desk)-This RAID controller will help readers to all the berries without buying more hardware.

  The rest of this topic:

  Part number Quantity Description

  F609J 1 MODULE CARD (CIRCUIT), CONTROLLER, PERC6I-JAN NOSLED

  JC881 1 THE ASSEMBLY, CABLE, 5 P, DRUMS, PERC-SASI

  NU209 1 BATTERY PRIMARY SCHOOL, 7WHR, 1 C, LITHIUM ION, JURČEK

  PK165 1 COST OF SERVICE, DRIVER, INT PERC6I SAS RAID

  T954J 1 ASSEMBLY, CARD (CIRCUIT), CONTROLLER, PERC6II, SERIAL ATTACHED SCSI, NOSLD

  T874M 1 MODULE, CABLE, SERIAL ATTACHED SCSI, SECONDARY, T610

  5FM3N 1 ASSEMBLY, CABLE, SERIAL ATTACHED SCSI, DIS1, T610

  W116M 1 MODULE, CABLE, SERIAL ATTACHED SCSI, PRIMARY, T610

  RM255 1 ASSEMBLY, CABLE, SERIAL ATTACHED SCSI, PRIMARY, T610

  Sam - CureSolutions.com

  With the material you listed, the T610 and Perc6 / I'd be able to use the remaining locations. It's because you have the SAS0 and cables DIS1 (5FM3N and RM255) that run on both sides of the bottom of basket.

  In a brief comment, Perc 6 / I can support much more server can contain, because it supports up to 32 drives per virtual disk and up to 64 virtual disks by Perc 6 / i.

  Let me know if it helps.

• Areca Raid Controller - ArcHTTP - does not work

  Areca Raid Controller - ArcHTTP - does not - need your help!

  I'm under Win 7pro, 64-bit, 24 MB of RAM

  Areca 1680 control Raid 3 7 TB and 1 TB Raid0. McRaid works very well.

  1 arec ArchHTTP V 1.85 is installed

  2. in the opening ArchHTTP-GUI is to show:

  a. #01 controller (PCI): Port 81 race

  b. Cfg Assistent: race Port 82

  When the application starts, 1 found contoller, throw... :81

  3. when I activate Cfg Wizard and launch the browser, opens ARCHTTP - Configurations

  4. when I turn on the #01 controller (PCI) and launch the browser, the site unsername and password opens

  5. After you have filled in the user pandpassword... nothing happens, the site doesnot open. It seems that I couldn't be found.

  Any idea, thanks for the help

  klfi

  Klaus,

  Have you tried the following: enter in your browser (IE, Firefox, or Chrome) and in the box enter the address bar:

  http://127.0.0.1:81 /.

  Which doesn't give you all the access you need? I just updated the firmware to 1.49 and installed new drivers 6.20.00.22 and it worked perfectly for me.

• HP 240 G4-328TX: need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Hello

  Need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Can anyone provide me please the link for download it for windows 10

  Thank you

  Hello:

  See if this driver works...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609938 & swItemId = ob_153701_1 & swEnvOid = 4192

• Communication controller need simple pci for an old hp dc 5800 desktop

  Original title: looking for always

  communication controller need simple pci for an older hp dc 5800 desktop vista business 32-bit

  Communication controller map Add-ons, are hard to find at low prices... Try this link.

  http://www.serversupply.com/controllers/

  This company has what it ever developed for a pc, new/used/rebuilt...

  Also, look at the hardware of pc from amazon.com

• Anyone using the 1213-4i Areca RAID controller?

  I have i7 - 2600K and the card mother ASUS P8P67 Pro and having still a heck of a time getting good performance of my readers. Considering a 3rd party RAID controller. Currently have two RAID 0 (2 discs each SATA 6 G) internally. One for the storage of the capture and the other for previews/pagefile. One of the concerns is that the Matrox MX02 Mini takes up the only available PCIe slot. And is $ 360 a decent price?

  Simple

• Qosmio F30: Need 64-bit driver for RAID controller

  Can someone help me?
  Please, I beg you!
  I have a Qosmio F-30.
  Where can I find 64-bit raid controller driver?

  Is there somewhere?
  Please, help me!

  Unfortunately, the 64-bit XP drivers are very rare and on the Toshiba driver page, you will find everything.
  Perhaps because Toshiba is not liberating all computers laptops equipped of XP 64-bit operating system.
  See only one way to find one; Google for 64 bit driver s David and maybe you succeed

  Good luck

• PowerEdge R230 add RAID controller

  Need advice: the goal is to add Dell PowerEdge RAID Controller H330 server Dell Poweredge R230.

  Originally, the data connection is to the motherboard with a mini SAS connector, power cord is related to the Board of Directors itself as well go with a connector 6-pin. Given that the new RAID controller has a different SAS (SFF8644) mini connector, I can't use the original cable.

  So try to solve that I bought 4 X SFF-8482 SAS a cable - Mini SAS SFF 8643. It would connect the RAID controller for readers. (THIS)

  I also added a power cords: 4 Pin IDE power Molex 1 male to 3 x female Splitter & 2 x 4-pin Molex to 6-pin PCI-E adjust Power Supply Cable (THIS) and (THIS). It was supposed to feed readers - but is not and they won't turn on.

  No idea why? Other ideas of ways to solve this problem?

  Thank you

  IB - EN1

  1. initially, I understood the topology based on the information on the user manual, see the attached figure describing Cabling two 3.5-inch hard drives 'to the PERC card. Isn't this relevant?

  The information I had previously provided are based on the wiring of the Controller PERC H330 with basket 4 x 3.5 "which I assumed you had based on your notes. Thanks for your clarification and ignore these P/Ns. Here are the cables you need.

  • Signal and cable LED to P/N 6R7VT the H330 controller to connect to the motherboard
  • Cable SAS junction A H330 for 2 hard drives or optical drives, P/N TTN3V
  • Hard/optical drive power cable from the system board P/N N9P7R for 4 HD (shipped with your server. Use only 2 connectors) or P/N VXR2 for 2 hard drives.

  IB - EN1

  457CH, TWV59, 6R7VT: I can not find an any of them on the dell Web site, you can share links?

  I would recommend that you directly contact Dell sales in your area.

  Thank you.

• The RAID controller compatibility

  Hi I just bought a new system and intend to use a RAID controller to configure a RAID array.

  The controller that is available is ""Intel RS25DB080"." I've never done this before so to start I wanted to ask you how can I check if it is compatible with my x 99 Deluxe motherboard?

  (he did not appear on the page that mentions the compatible products: Specifications of RS25DB080 for the Intel® RAID controller)

  Secondly, it would be possible to set up several RAID arrays using a single controller? that is, if I want to do a table composed of 3 disks and another 3 more I have to buy an extra card?

  Also if this controller is not compatible what other controller I'll buy? And what exactly what I look for in a RAID controller if I'm looking for one? (Currently I just check to see if it's a SATA or SAS controller)

  So, basically, do not know much about the RAID needs your help, thank you!

  Generally if you are serious about RAID for the only real video editing solution is arec, because you will need 3 RAID or Raid 6.  There are a number of X 99 different systems with the Areca RAID card installed I am owner of a BOW 1883i, which works very well in my x 99 motherboard, I have it configured with 7 discs each RAID 3 Samsung 840 Pro I probably will be getting rid of it I can get nearly the same results with a SSD of unique m2.  In my old age, I went basic/simple rather than exotic.

• Portege M800 - point of exclamation on SCSI RAID Controller driver

  I had installed XP on my Portege M800. And it works properly.
  One thing that bothers me is the exclamation point on the SCSI and RAID controller in the Device Manager tab.
  XP says that no drivers have been installed.

  Need help to sweep the Exclamation marks or what driver should I install?
  Thank you

  RAID SCSI on a laptop? : eek:

  Try the Intel Matrix Storage Manager for the Toshiba Site.

• HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

  Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
  Options
  10/11/2015-12:08 AM
  Product name: HP Pavilion dm4-2070us
  Operating system: Microsoft Windows 10 (64-bit)
  Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10
  
  Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10
  
  I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

  Hi Mrstenter,

  The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

  SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

  Thank you very much for your help.

  http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29

  

• Ricoh PCIe Memory Stick host controller driver

  I have the Sony VPCEA390x and Win 7 Premium. It is 64-bit based.

  I installed Norton Ghost SW to do backups and restorations and owe it to create/have a recovery CD. The recovery CD does not support 64-bit drivers.

  The pilot validation tool Ghost Recovery has identified as a problem Ricoh PCIe Memory Stick host controller driver.

  How can I get this driver in 32 bit?

  I need to add this driver 32-bit on a recovery CD, I won't be able to recover my laptop.

  Note: Recovery refers to the reconstruction of disk image.

  Thank you.

  Hello and welcome to the forums.
  Series VPC - EA3 books are x 64-bit systems only. Unfortunately, there is no support or drivers for x 32.

• HP 355 G2: 3d Video Controller Driver for Hp 355 g2 portable need help

  Hi all

  I use Hp 355 g2 laptop with Window 7 64 bit

  I need help reagarding controller driver 3d video. I need this driver. I tried to find the Hpoffical site, but not found.

  PCI\VEN_1002 & DEV_6664 & SUBSYS_22C2103C & REV_00
  PCI\VEN_1002 & DEV_6664 & SUBSYS_22C2103C
  PCI\VEN_1002 & DEV_6664 & CC_038000
  PCI\VEN_1002 & DEV_6664 & CC_0380

  and unknow driver is missing

  USB\VID_138A & PID_0050 & REV_0060
  USB\VID_138A & PID_0050

  Please send me the link for this driver.

  Hello:

  You need these drivers...

  Video:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6886537&swItemId=ob_134450_1&swEnvOid=4059#tab1

  UNK:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6886537&swItemId=ob_132284_1&swEnvOid=4059

• Need help to install on win xp SP2, hp 8300 elite raid drivers?

  I spent to win 7 on HP elite 8300 for win xp sp2. I did this because I had to install a specific software that only works on Windows xp sp2. And now I have the problem with the raid drivers. I need help how to install them, and I don't know if I downloaded the right one.

  Maybe the only solution is to insert sort this driver in the instalation of win xp cd because I don't have floppy drive.

  HP elite 8300

  SERIES:[personal information]

  PRODCT NO.: B0F31EA #AKQ

  Hello:

  Please read the info on the link below on how to integrate the SATA/RAID drivers.  Read the Intel section and read the document about how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The drivers from the link below allows you to integrate. Second listed file is what you need for XP 32 bit.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21730&ProdId=2101&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType=.

  The real driver you need is the controller RAID Intel® Express Chipset SATA Desktop/Workstation/Server. But all by wake.