Similar Questions

• Areca ARC-1223-8I is worth?

  Hello world

  Announcement for the first time, but of course enjoy reading.

  The Areca Raid card a waste of money for my mounting bench that I just built.

  ARCEA ARC-1223-8I-MS PCI-Express 2.0 x 8 Low Profile SATA / SAS RAID controller card

  http://www.Newegg.ca/product/product.aspx?item=N82E16816151130

  Or should I bite the bullet and get something like this with more cache.

  Areca ARC - 1231 ML - 2 G PCI Express SATA II (3.0 Gbps) controller card

  http://www.Newegg.ca/product/product.aspx?item=N82E16816151033

  The test bench

  2 SSD Samsung 840 X

  8 x Western digital Black

  Intel I7 3930 K

  RAM to 64Gb Corsair vengeance

  ASUS GTX 680

  ASUS Rampage Extreme IV

  PSU corsair 1050

  Corsair H110 cooler of water.

  If you're going to bite a bullet, opt for the Areca ARC-1882LP

  It has double the cache memory, this memory is much faster, 1333 instead of 800 and although Newegg doesn't, it supports PCIe 3.0 instead of PCIe - 2.0. If you bite an even larger ball, think of the Areca ARC-1882iX-12 , which adds not only additional ports, but has also upgrade cache up to 4 GB.

  The 12xx line is quite dated, it uses an older processor, the dual core on the 1882 line, use a lot slower cache and is only PCIe - 2.0.

• I can exchange my old Areca 1880 - ix with latest Areca ARC-1883

  Hello everyone.  It's been a while since I've been here.

  I think, but am not sure, that my Areca 1880-ix died. I'll be contact our support Areca to see if I can get to help me solve the problems there.  As they did a year or two ago.

  In any case, I see that a new Areca ARC-1883 has added to its range.   Areca Technology Corporation and here Areca Technology Corporation

  
  

  And if I can't get the old work of 1880-ix, I wonder what that the thought of the Abobe forum may be on this new Areca ARC-1883.

  To summarize, I have a hard drive system and 4 x 1 TB of hard = 4 to disks.

  Based on the experience of someone here, such an Exchange has a meaning?

  Forward a discussion here on my choice.

  I don't see Bill poster here: upgrading HD capacity Areca

  
  Thank you all!

  
  Rowby

  I suspect you can do but a 1883 ARC would really an investment towards an upgrade of the future system.  I don't remember your system (I am not in vain PPBM5 results), but did not find your data.  So some of the expensive benefits of the most recent Board that you cannot use with former components of your mother/disc card. Why not check with Areca to see if they have an old lower price option, unless you plan an upgrade of the system in the future not far away I just dared my basement filled with junk and checked on one of my very early builds that has a controller from Areca in it, but unfortunately it was the previous generation model ARC-1680.

  You can check ebay for a used or I think one that I just looked on Amazon seems to be unused.  Perhaps Areca upgraded older models.

• PCI - E 1 x SATA/SAS controller

  Hello world.

  I have ESXi willingly running on an ITX motherboard.  Only sata ports complex 4 chipset and currently all 4 are used.  My chassis will take care of the other 2-3 readers in its current configuration.

  I have not seen all PCI - E 1 x SATA/SAS cards that will work ESXi 4.  Does anyone know of one that works?

  ID prefer to stay away from Silicon Image if possible (do not have a pleasant experience in the past) but if it works, it works.

  The card would not have to be on the official HCL.  I'm happy with compatible whitebox.  It is a home server.

  Thank you.

  There are very inexpensive NAS pregnant sub $100 or find an old PC. Lots available for free.  Have you looked at http://vm-help.com for achievable controllers?

• Areca ARC-1680i-12 - help

  I am running Win 7 64 - bit, 64 GB RAM,

  Areca ARC-1680i-12 (6 to Raid 0 and 3 TB Raid 3... all Samsung F1) firmware 1.49 + BPM, Asus P9X79 WS, i7 3930 (OC 4.2), GTX 685 4 GB

  Corsair Gold 1200W power SUPPLY

  Using 50% PPr CS6 and 50% AE CS6, XDCAM 422 files

  The system was working very stable without any problems for months. History of monitor arec present any problems.

  Since 2 weeks I'm ARECA HW-monitor (history) messages following SLA:

  CTR low voltage v-1, 92... restart with CLP stack.

  Since the problem appears, no hardware components not installed werde.

  What this way message, where could be the bottlenec, how can we solve the problem.

  Is Areca ARC 1680i 'endangered', do I have to quality upwards and change?

  Pls explain easily, that I'm not material-experianced.

  Thanks for the help,

  klfi, Austria

  Klaus,

  These questions have been answered in the http://ppbm7.com/index.php/intro-part-1 and the following pages, but yes, it works on the other side of P9X79 and uses PCIe - 3.0

• What is the good memory of 2 GB for my Areca ARC-1880ix

  Hello

  My Areca ARC-1880ix came with 1 GB of memory onboard.   I can't upgrade to 4 GB of memory.  But I'm just upgrading it 2 GB of memory, replace the key of 1 GB to 2 GB memory.

  I want to double check to make sure that the new memory is "compatible".  One of the reasons why I'm checking although it seems that the stick indeed fits within the Council, the stick is not too 'high' as the original memory stick.

  I guess that I'm being too cautious. I guess I could just the memory stick in the card and see if it explodes.  But I tell myself that I would run the sticks by experts here.

  See the attached photo of the two sticks, side by side. BTW, the upward alignment slots...

  The memory stick supplied with the card has these specifications:

  UNIGEN
  UG 12T7200M8DR-8CR

  1 GB DDR2 800 240PIN RDIMMS

  1116 ME75TDM80018CUEKRS

  The memory I bought is 2 GB and here are the specs:

  Kingston

  9905429 028.NATALIA AOOLF

  KTD-DM8400A / 2G

  1.8V

  0000005468831

  Specifically, this stick:

  http://www.Amazon.com/GP/product/B000ACZC9C

  Product features and technical details

  Characteristics of the product

  • Includes a module to 2 GB of 533 MHz DDR2 Desktop for Dell
  • Replaces Dell A0515351, corresponds to the size 4700C, xps gen 5, e520, optiplex 210l, 740, 745, gx280, gx520, gx620, gx745, sx280,.
  • Memory designed, manufactured and tested to the specifications of each particular brand computer system
  • The leader of the industry in the PC memory
  • type of DIMM 240-pin
  • Station work Precision 380 390 and xps 600 700 710

  Technical details

  • Model: KTD-DM8400A/2 G
  • Item package quantity: 1
  • Platform: PC
  • Memory RAM technology: DRAM, DDR2 SDRAM
  • Form factor: DIMM 240-pin
  • Memory storage capacity: 2 GB
  • Memory speed: 533 MHz
  • Memory specification compliance: PC2-4200
  • Warranty: limited lifetime warranty
  • Equivalent OEM part number: DELL A0515351

  
  

  

  Rowby,

  This is probably the module you are looking for:

  Kingston ValueRAM KVR800D2E5 / 2G

• T420 - Question of disk drive (wired Sata + SAS / Sata 2.5 / 3.5 is possible?)

  Hello

  I bought the T420 PowerEdge with a single SATA drive. I've added 3 more to max on internally wired to 4

  I wonder, do I ALSO have to add the hot swap 2.5 or 3.5 and all have work. I guess I have to buy a special raid card if it is at all possible.

  I want to be able to do is have the 4 cables + start adding the other 2.5 or 3.5 (based on price) and build slowly upward.

  If possible, could you please recommend this card, I have to use to get there?

  Thank you very much

  DellUserMichael,

  Unfortunately, you wouldn't be able to do, it is because the chassis are different depending on the storage option selected. T420 storage options are the

  

  1                                   2                                 3

  • Player 4 option x 3.5 inches: (#1).
    • Cable drive bays
    • SAS and SATA disk drive

  8 x 3.5 or 2.5-inch drive option(#2)

  • Hot swappable drive bays
  • SAS, SATA or SSD drives

  option 16 x 2.5 in drive: (#3)

  • Hot swappable drive bays
  • SAS, SATA or SSD drives

  So the question is the chassis are actually different by the selected option.

  Let me know if it helps.

• Failure of the Areca 1212

  After a few months under a server supermicro esxi4.1 with an areca raid controller errors appear after POSD 1212:

  The disks are RAID 1.

  Any help attended.

  WARNING: LinScsi: SCSILinuxAbortCommands: failure, ARECA ARCMSR Driver SATA/SAS RAID ControllerDriver Version 1.20.00.15.vmk.100202 for vmhba2 [0 m
  [(7 m 66: 16:44:51.630 cpu0:10101331)] WARNING: arcmsr5: abandon the device command (0xe01fc00) to id scsi lun 0 = 0 = [0 m
  [(7 m 66: 16:44:51.630 cpu0:10101331)] WARNING: LinScsi: SCSILinuxAbortCommands: failure, ARECA ARCMSR Driver SATA/SAS RAID ControllerDriver Version 1.20.00.15.vmk.100202 for vmhba2 [0 m
  [(7 m 66: 16:44:51.843 cpu0:10101331)] WARNING: arcmsr5: abandon the device command (0xe030400) to id scsi lun 0 = 0 = [0 m
  [(7 m 66: 16:44:51.843 cpu0:10101331)]

  and

  WARNING: LinScsi: SCSILinuxAbortCommands: failure, ARECA ARCMSR Driver SATA/SAS RAID ControllerDriver Version 1.20.00.15.vmk.100202 for vmhba2 [0 m
  [(7 m 66: 16:45:19.941 cpu1:4161)] WARNING: LinScsi: SCSILinuxAbortCommands: failure, ARECA ARCMSR Driver SATA/SAS RAID ControllerDriver Version 1.20.00.15.vmk.100202 for vmhba2 [0 m
  [(7 m 66: 16:45:19.941 cpu1:4161)] WARNING: arcmsr5: abandon the device command (0xe02e800) to id scsi = 0 lun = 1 [0 m
  66:16:45:21.018 cpu0:4098) arcmsr5 < 5 >: = "0x0x4100b50e9400" Sri Bccp got the command aborted
  66:16:45:21.018 cpu0:4098) arcmsr5 < 5 >: Sri get a command made illegal BCC acb = BCC = "0x0x4100b50e9400" ccbacb = "0x0x41000b813588" startdone "0x0x41000b813588" = 0 x 0 = 41 ccboutstandingcount
  [(31; 1 m 66: 16:45:21.018 cpu0:4098)] WARNING: LinScsi: SCSILinuxCmdDone: attempt to double completion [0 m
  66:16:45:21.019 cpu0:4098) Backtrace current CPU # 0, worldID = 4098, ebp = 0x417f800179a8
  66:16:45:21.019 cpu0:4098) 0x417f800179a8: stack of PanicLogBacktrace@vmkernel:nover+0x18 [0x4180278577b5]: 0x417f800179d8, 0x417f8
  66:16:45:21.019 cpu0:4098) 0x417f80017ae8: PanicvPanicInt@vmkernel:nover+0x1ab stack [0x4180278579f4]: 0x417f80017bd8, 0 x 4180278
  66:16:45:21.020 cpu0:4098) 0x417f80017af8: Panic_vPanic@vmkernel:nover+0x18 stack [0x418027857fdd]: 0 x 3000000008, 0x417f80017be8
  66:16:45:21.020 cpu0:4098) 0x417f80017bd8: stack of vmk_Panic@vmkernel:nover+0xa1 [0x41802788a572]: 0x24c0, 0xd0b50e9400, 0x417f800
  66:16:45:21.021 cpu0:4098) 0x417f80017c48: SCSILinuxCmdDone@esx:nover+0x2c1 stack [0x418027c6a35e]: 0 x 0x418027d78e38, 0 x 410, 202
  66:16:45:21.021 cpu0:4098) 0x417f80017c88: stack of arcmsr_interrupt@esx:nover+0x241 [0x418027d78df6]: 0xd000000023, 0x418027d78e38
  66:16:45:21.021 cpu0:4098) 0x417f80017cc8: stack of Linux_IRQHandler@esx:nover+0x77 [0x418027c7bd38]: 0xd0, 0x417f80017d08, 0x417f8
  66:16:45:21.021 cpu0:4098) 0x417f80017d58: stack of IDTDoInterrupt@vmkernel:nover+0x348 [0 x 418027832201]: 0x4100b6030150, 0x417f800
  66:16:45:21.022 cpu0:4098) 0x417f80017d98: IDT_HandleInterrupt@vmkernel:nover+0x85 stack [0x4180278324da]: 0x2637d9eee01956, 0x4
  66:16:45:21.022 cpu0:4098) 0x417f80017db8: stack of IDT_IntrHandler@vmkernel:nover+0xc4 [0x418027832e2d]: 0x417f80017ec0, 0x418027a
  66:16:45:21.022 cpu0:4098) 0x417f80017dc8: stack of gate_entry@vmkernel:nover+0x46 [0x4180278da747]: 4018 x 0 0 x 4018, 0 x 0 0 x 0 0 x 0
  66:16:45:21.023 cpu0:4098) 0x417f80017ec0: Power_HaltPCPU@vmkernel:nover+0x27d stack [0x418027aacb36]: 0x417f80017f70, 0 x 1 0 x 26
  66:16:45:21.023 cpu0:4098) 0x417f80017fd0: CpuSchedIdleLoopInt@vmkernel:nover+0x985 stack [0x4180279cbe1e]: 0x417f80017ff0, 0x41
  66:16:45:21.024 cpu0:4098) 0x417f80017fe0: CpuSched_IdleLoop@vmkernel:nover+0x15 stack [0x4180279d15ee]: 0x417f80017ff8, 0 x 0, x 0
  66:16:45:21.024 cpu0:4098) 0x417f80017ff0: HostPCPUIdle@vmkernel:nover+0xd stack [0 x 418027834916]: 0x0, 0x0, 0x0, 0x0 0 x 0
  66:16:45:21.024 cpu0:4098) 0x417f80017ff8: [0x0] < unknown > battery: 0x0, 0x0, 0x0, 0x0 0 x 0
  66:16:45:21.025 cpu0:4098) [45 m [33; 1mVMware ESXi 4.1.0 [Releasebuild-260247 X86_64] [0 m]
  66:16:45:21.025 cpu0:4098) failed to REACHED vmkdrivers/src_v4/vmklinux26/vmware/linux_scsi.c:2190--PAS
  CR0 66:16:45:21.025 cpu0:4098) = 80010039 cr2 = cr3 0 x 0 x 0 = 0x10ce1000 = 0x16c cr4
  66:16:45:21.025 cpu0:4098) pcpu:0 world: 4098 name: "idle0 (I).
  66:16:45:21.025 cpu0:4098) pcpu:1 World: 7146 name: "Oba-vmware_bas' (U)
  @BlueScreen: failure in the vmkdrivers/src_v4/vmklinux26/vmware/linux_scsi.c:2190--NE NOT REACHED
  Start Code 66:16:45:21.025 cpu0:4098): uptime VMK 0 x 418027800000: 66:16:45:21.025
  66:16:45:21.025 cpu0:4098) 0x417f80017af8: stack of Panic_vPanic@vmkernel:nover+0x13 [0x418027857fd8]: 0 x 3000000008
  66:16:45:21.026 cpu0:4098) 0x417f80017bd8: stack of vmk_Panic@vmkernel:nover+0xa1 [0x41802788a572]: 0x24c0
  66:16:45:21.026 cpu0:4098) 0x417f80017c48: stack of SCSILinuxCmdDone@esx:nover+0x2c1 [0x418027c6a35e]: 0 x 202
  66:16:45:21.026 cpu0:4098) 0x417f80017c88: stack of arcmsr_interrupt@esx:nover+0x241 [0x418027d78df6]: 0xd000000023
  66:16:45:21.027 cpu0:4098) 0x417f80017cc8: stack of Linux_IRQHandler@esx:nover+0x77 [0x418027c7bd38]: 0xd0
  66:16:45:21.027 cpu0:4098) 0x417f80017d58: stack of IDTDoInterrupt@vmkernel:nover+0x348 [0 x 418027832201]: 0x4100b6030150
  66:16:45:21.027 cpu0:4098) 0x417f80017d98: stack of IDT_HandleInterrupt@vmkernel:nover+0x85 [0x4180278324da]: 0x2637d9eee01956
  66:16:45:21.028 cpu0:4098) 0x417f80017db8: stack of IDT_IntrHandler@vmkernel:nover+0xc4 [0x418027832e2d]: 0x417f80017ec0
  66:16:45:21.028 cpu0:4098) 0x417f80017dc8: stack of gate_entry@vmkernel:nover+0x46 [0x4180278da747]: 0 x 4018
  66:16:45:21.028 cpu0:4098) 0x417f80017ec0: stack of Power_HaltPCPU@vmkernel:nover+0x27d [0x418027aacb36]: 0x417f80017f70
  66:16:45:21.029 cpu0:4098) 0x417f80017fd0: stack of CpuSchedIdleLoopInt@vmkernel:nover+0x985 [0x4180279cbe1e]: 0x417f80017ff0
  66:16:45:21.029 cpu0:4098) 0x417f80017fe0: stack of CpuSched_IdleLoop@vmkernel:nover+0x15 [0x4180279d15ee]: 0x417f80017ff8
  66:16:45:21.030 cpu0:4098) 0x417f80017ff0: stack of HostPCPUIdle@vmkernel:nover+0xd [0 x 418027834916]: 0x0
  66:16:45:21.030 cpu0:4098) 0x417f80017ff8: [0x0] < unknown > battery: 0x0
  kernelGSbase:0 x FSbase:0 x GSbase:0 x 418040000000 66:16:45:21.038 cpu0:4098 0 0)
  66:16:45:21.018 cpu0:4098) LinScsi: SCSILinuxCmdDone: attempted end double
  0:00:00:28.899 cpu1:4825) Elf: 3028: Kernel module arcmsr was loaded, but doesn't have a signature attached
  Coredump on the disk.
  1 1 location.
  message storage on vmhba32: result of the sales order of bulk = 0
  message from USB storage on vmhba32: result 0 x 1 data transfer in bulk
  0:00:00:46.061 cpu0:5552) ScsiScan: 1059: path 'vmhba1:C0:T0:L0': seller: "TEAC" model: Rev 'DV - 28 s-W': ' 1. 2 '
  0:00:00:46.061 cpu0:5552) ScsiScan: 1062: path "vmhba1:C0:T0:L0": Type: 0 x 5, rev ANSI: 5, TPGS: 0 (none)
  0:00:00:46.063 cpu0:5552) ScsiUid: 273: "vmhba1:C0:T0:L0" path does not support VPD device Id page.
  0:00:00:46.072 cpu0:5552) VMWARE SCSI Id: could not get the disc for vmhba1:C0:T0:L0 id
  0:00:00:46.073 cpu0:5552) ScsiScan: 1059: path 'vmhba2:C0:T16:L0': seller: "Areca" model: "RAID controller" Rev: "R001".
  0:00:00:46.073 cpu0:5552) ScsiScan: 1062: path "vmhba2:C0:T16:L0": Type: 0 x 3, ANSI rev: 0, TPGS: 0 (none)
  [(7 m 0: 00:00:46.073 cpu0:5552)] WARNING: ScsiScan: 116: path 'vmhba2:C0:T16:L0': unsupported pre SCSI-2 (ansi = 0) [0 m unit
  0:00:00:46.073 cpu0:5552) ScsiScan: 1059: path 'vmhba2:C0:T0:L0': seller: "Areca" model: "ARC-1212-FLIGHT #000' Rev:"R001"
  0:00:00:46.073 cpu0:5552) ScsiScan: 1062: path "vmhba2:C0:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
  0:00:00:46.073 cpu0:5552) ScsiScan: 1059: path 'vmhba2:C0:T0:L1': seller: "Areca" model: "ARC-1212-FLIGHT #001' Rev:"R001"
  0:00:00:46.073 cpu0:5552) ScsiScan: 1062: path "vmhba2:C0:T0:L1": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)
  0:00:00:46.075 cpu0:4493 usb storage device) (strangled 0) WARNING on vmhba32 (SCSI cmd INVESTIGATION): compensation endpoint for hose 0xc0008280 halt
  message from USB storage on vmhba32: scsi cmd done

  I sent a few requests to Areca for support and they came back today teach me update me my drivers of vmware and has reported me on its Web site.  The page shows the driver as a 4.0 driver drivers but it installed:

  This is the driver I have installed:

  http://www.areca.us/support/s_vmware/esx_4/VMware-ESX-drivers-SCSI-arcmsr-400.1.20.00.15.VMK.110418.zip

  I'll check back with an update if it breaks down or is stable.  I have reactivated the NCQ too.

• Precision T5600 SAS/SATA Controller Driver

  I recently received the workstation Precision T5600. The original configuration was the installation in RAID 1 with 2 SATA drives. I killed the RAID and loaded a single drive SAS instead of RAIDs. When I loaded a Windows 7 installation disc, windows could not see all of the hard drives. So my question is there a place where I can download the driver for the SATA/SAS controller and throw on a USB to load during the installation process of Windows 7?

  Thank you.

  Dell Dear user community.

  I having the same problem as jHartweck,

  I recently bought the Dell Precision T5600, but I'm not able to install Windows 7, because the SATA/SAS controller driver is not available.

  Someone of you managed to solve this problem?

  I'm looking forward to your reply.

  Sincerely,

  Micha Joosten

  Administrator COMPUTER

  Logistics engineering INTHER

• SAS expander backplane directly reduce in SATA mode?

  I have a C6220 II with an Expander backplane of 2.5 ". However, I don't need performance of fast storage in this machine and want to use the PCI slot for something else, so I thought to remove the RAID controller and attach directly to the controller of the motherboard, which takes only supported SATA. My drives are SATA, rather than SAS, but I understand that this will not work because the controller should support SAS to use the Extender.

  I was wondering if it is possible to change a setting, perhaps a rider, to allow backplane running in SATA mode directly, rather than as an Expander, so that I can use the direct connection of motherboard? I only need two drives from the node, then I don't need to use the expander control.

  Thank you.

  Tentonin,

  There are no jumpers to move for this, you need to replace backplane with version 2.5 live Backplane part # WC17M (below)

  That will allow you to connect directly 24 SAS/SATA ports to 24 2.5 "SATA/SAS drives. Because it is a passive basket background, it does not support the flexible allocation of hard drives at the nodes; each node in the chassis will get an equal share.

  Let me know if it helps.

• Get 6G SATA in the platters of drive Mac Pro 2010

  After some research, it seems that the procedure to attach a map of mini SAS PCIe to readers in the disc trays Mac Pro internal is simple enough for the Pros of the Mac 2006-8, but not so much for 2009-2012.

  With regard to the very simple procedure for the 2006-8 Mac Pros:

  http://blog.MacSales.com/12247-upgrade-your-06-08-Mac-Pros-internal-bays-to-SATA-3-0

  AFA I can tell, the Mac Pro 2009-12 is not a SATA port transfer to connector mniSAS on the motherboard as the 2006-8, but requires some antics more. Please correct me if I'm wrong.

  I found this kit, which is expensive, but it looks like it will do the job

  https://www.maxupgrades.com/iStore/index.cfm?fuseaction=product.display & Product _ ID = 189 & ParentCat = 351

  Ideas on this or alternatives?

  Material:

  3 x Samsung EVO 850 1 TB 2.5 "drives

  1 x HGST Ultrastar 3 TB 3.5 "disk

  Areca ARC-1882-ix-24

  Thanks for reading this.

  Why not just buy a special tray in which you mount the SSD and it connects to your SATA bus using one of the four internal trays. However, this bus doesn't support 3G in this model, a 6G SSD will work, but not as fast.

• Reference Dell 2950 con brain sata 2.5 "[GP]

  Ho gen con dell 2950 III Server background basket 8 x 2, 5 "perc6 / i integrated (firmware 6.2.0.0013). Ho need di mettere brain sata SAS instead.
  Quando inserisco I brain SATA (availability), dopo pochi minuti dall'accensione, he drove inzia a lampeggiare ambra / verde e prendo he message E1810 di disk fault, my it funziona disco place. It system starts if e nel pannello della perc6 no are evidenziati if.
  Ho tried ad insert I have brain nei cassetti posizionando viti nell'alloggiamento indicated by my cosi sata I brain non proprio visti since uno spazio tra remains are there e disco the fine del cassetto allontanando he dal disco del che non riesce a airfare contact cosi backplane connector. M'immagino che lo spazio sia stato previsto by it case di UN connector SATA/SAS, che ho tried one my online cercare non ho trovato by I brain 2.5 ".
  Ho tried svariati brain, nuovi tutti may products, per essere certo dell' my of integrita dei brain ho sempre lo stesso problema.
  I like to know:
  "- connector it esiste (come by I have brain 3.5") by I da cassetti 2.5? E to TR qual'e the sigla.
  -a part not succeed ad find it disco in caso di break tramite leads/message, quali sono i rischi nell' use dei brain sata senza he connector?
  -the dell 'error E1810 forward-looking dall' rilevazione dei brain sata o use it problema e another?
  -posso ignorare e error continuare ad usare I brain sata?
   
  Grazie by it support
  Buongiorno,
  Chiedo sorry... consiglio Nessun in merito al mio post?
   
  Grazie

• RAID Sata 3 drive hard brand and capabilities recommendations

  Hello

  Please see this Discussion.

  http://forums.Adobe.com/thread/904726?TSTART=0

  I start this new thread to focus on the recommendations of HDD for Raid SATA3 disks.

  I'm changing my computer editing and totally without disk SATA2 on SATA3 readers.  I'm going to use is no longer my 'old' SATA2 disks in this system.

  I will use them with an Areca ARC-1880ixl-12.

  I'm looking for the brand and the model recommendations as well as the capabilities of each player. »

  Currently I use 500 GB discs and wonder if there is an advantage in overall speed, more and more readers to 1000GO.

  And your suggestions and comments will be appreciated.

  Rowby

  This is the data I have on this disc:

  SKU: 0F12115, HDS723020BLA642, EAN: 5704327982289, 5704327985259

  but of course, these are European or even Dutch figures.

• Areca Raid Controller, which?

  I am looking to buy the Areca ARC-1880i. Y at - it a big difference in the preformance between this controller which has 512 MB and the next cards upwards (1880ix) with 2g or 4g of memory.

  I do not have hard numbers to substantiate this, but comparing the 1680 with 512 MB against 2 GB, the difference is clearly visible. The difference between 2 and 4 GB is less clear with video material, as often the clips are much more than 4 GB. To preview files or cache of media, it will be more noticeable.

  Personally, I would always opt for the iX version and the largest cache that fits your budget.

• ARECA RAID CARD PROBLEMS

  I'm in the middle of my new build system.

  I have problems with an Areca arc-1680 IX 16 Port.

  Basically the card is so slow, I tried several volumes of 2 x hd 10 raid 0, raid 0, raid 30 ect. the most I've gotten is 170 ish mbs. pics from top to bottom.

  I tried with HD Tach and HD Tune.

  Motherboard used:

  ASUS Z8NA-D6

  HD: Samsung hd103sj

  Windows 7 Ultimate edition.

  I tried the 8 available only 2 x pci-e slots. makes no difference.

  arec awaiting return to me.

  This is the second card I tested this week. So I have 2 cards that cost £££ and they are useless.

  any suggestions what it might be.

  Baz

  Baz,

  I tend to agree with Scott and Bill it could be the motherboard.

  You know I have the same card controller (12 port one) and I use the older Spinpoint F1, which are a bit slower than the F3 and my HD Tach results like this:

  

  Find it me hard to believe that give two cards this boredom and that is why I think that Scott and Bill are on the right track.